f5af0a9787
On P10, the feature doing an automatic "save & restore" of a VCPU interrupt context is set by default in OPAL. When a VP context is pulled out, the state of the interrupt registers are saved by the XIVE interrupt controller under the internal NVP structure representing the VP. This saves a costly store/load in guest entries and exits. If OPAL advertises the "save & restore" feature in the device tree, it should also have set the 'H' bit in the CAM line. Check that when vCPUs are connected to their ICP in KVM before going any further. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210720134209.256133-3-clg@kaod.org
135 lines
5.0 KiB
C
135 lines
5.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Copyright 2016,2017 IBM Corporation.
|
|
*/
|
|
#ifndef _ASM_POWERPC_XIVE_REGS_H
|
|
#define _ASM_POWERPC_XIVE_REGS_H
|
|
|
|
/*
|
|
* "magic" Event State Buffer (ESB) MMIO offsets.
|
|
*
|
|
* Each interrupt source has a 2-bit state machine called ESB
|
|
* which can be controlled by MMIO. It's made of 2 bits, P and
|
|
* Q. P indicates that an interrupt is pending (has been sent
|
|
* to a queue and is waiting for an EOI). Q indicates that the
|
|
* interrupt has been triggered while pending.
|
|
*
|
|
* This acts as a coalescing mechanism in order to guarantee
|
|
* that a given interrupt only occurs at most once in a queue.
|
|
*
|
|
* When doing an EOI, the Q bit will indicate if the interrupt
|
|
* needs to be re-triggered.
|
|
*
|
|
* The following offsets into the ESB MMIO allow to read or
|
|
* manipulate the PQ bits. They must be used with an 8-bytes
|
|
* load instruction. They all return the previous state of the
|
|
* interrupt (atomically).
|
|
*
|
|
* Additionally, some ESB pages support doing an EOI via a
|
|
* store at 0 and some ESBs support doing a trigger via a
|
|
* separate trigger page.
|
|
*/
|
|
#define XIVE_ESB_STORE_EOI 0x400 /* Store */
|
|
#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
|
|
#define XIVE_ESB_GET 0x800 /* Load */
|
|
#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
|
|
#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
|
|
#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
|
|
#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
|
|
|
|
/*
|
|
* Load-after-store ordering
|
|
*
|
|
* Adding this offset to the load address will enforce
|
|
* load-after-store ordering. This is required to use StoreEOI.
|
|
*/
|
|
#define XIVE_ESB_LD_ST_MO 0x40 /* Load-after-store ordering */
|
|
|
|
#define XIVE_ESB_VAL_P 0x2
|
|
#define XIVE_ESB_VAL_Q 0x1
|
|
#define XIVE_ESB_INVALID 0xFF
|
|
|
|
/*
|
|
* Thread Management (aka "TM") registers
|
|
*/
|
|
|
|
/* TM register offsets */
|
|
#define TM_QW0_USER 0x000 /* All rings */
|
|
#define TM_QW1_OS 0x010 /* Ring 0..2 */
|
|
#define TM_QW2_HV_POOL 0x020 /* Ring 0..1 */
|
|
#define TM_QW3_HV_PHYS 0x030 /* Ring 0..1 */
|
|
|
|
/* Byte offsets inside a QW QW0 QW1 QW2 QW3 */
|
|
#define TM_NSR 0x0 /* + + - + */
|
|
#define TM_CPPR 0x1 /* - + - + */
|
|
#define TM_IPB 0x2 /* - + + + */
|
|
#define TM_LSMFB 0x3 /* - + + + */
|
|
#define TM_ACK_CNT 0x4 /* - + - - */
|
|
#define TM_INC 0x5 /* - + - + */
|
|
#define TM_AGE 0x6 /* - + - + */
|
|
#define TM_PIPR 0x7 /* - + - + */
|
|
|
|
#define TM_WORD0 0x0
|
|
#define TM_WORD1 0x4
|
|
|
|
/*
|
|
* QW word 2 contains the valid bit at the top and other fields
|
|
* depending on the QW.
|
|
*/
|
|
#define TM_WORD2 0x8
|
|
#define TM_QW0W2_VU PPC_BIT32(0)
|
|
#define TM_QW0W2_LOGIC_SERV PPC_BITMASK32(1,31) // XX 2,31 ?
|
|
#define TM_QW1W2_VO PPC_BIT32(0)
|
|
#define TM_QW1W2_HO PPC_BIT32(1) /* P10 XIVE2 */
|
|
#define TM_QW1W2_OS_CAM PPC_BITMASK32(8,31)
|
|
#define TM_QW2W2_VP PPC_BIT32(0)
|
|
#define TM_QW2W2_HP PPC_BIT32(1) /* P10 XIVE2 */
|
|
#define TM_QW2W2_POOL_CAM PPC_BITMASK32(8,31)
|
|
#define TM_QW3W2_VT PPC_BIT32(0)
|
|
#define TM_QW3W2_HT PPC_BIT32(1) /* P10 XIVE2 */
|
|
#define TM_QW3W2_LP PPC_BIT32(6)
|
|
#define TM_QW3W2_LE PPC_BIT32(7)
|
|
#define TM_QW3W2_T PPC_BIT32(31)
|
|
|
|
/*
|
|
* In addition to normal loads to "peek" and writes (only when invalid)
|
|
* using 4 and 8 bytes accesses, the above registers support these
|
|
* "special" byte operations:
|
|
*
|
|
* - Byte load from QW0[NSR] - User level NSR (EBB)
|
|
* - Byte store to QW0[NSR] - User level NSR (EBB)
|
|
* - Byte load/store to QW1[CPPR] and QW3[CPPR] - CPPR access
|
|
* - Byte load from QW3[TM_WORD2] - Read VT||00000||LP||LE on thrd 0
|
|
* otherwise VT||0000000
|
|
* - Byte store to QW3[TM_WORD2] - Set VT bit (and LP/LE if present)
|
|
*
|
|
* Then we have all these "special" CI ops at these offset that trigger
|
|
* all sorts of side effects:
|
|
*/
|
|
#define TM_SPC_ACK_EBB 0x800 /* Load8 ack EBB to reg*/
|
|
#define TM_SPC_ACK_OS_REG 0x810 /* Load16 ack OS irq to reg */
|
|
#define TM_SPC_PUSH_USR_CTX 0x808 /* Store32 Push/Validate user context */
|
|
#define TM_SPC_PULL_USR_CTX 0x808 /* Load32 Pull/Invalidate user context */
|
|
#define TM_SPC_SET_OS_PENDING 0x812 /* Store8 Set OS irq pending bit */
|
|
#define TM_SPC_PULL_OS_CTX 0x818 /* Load32/Load64 Pull/Invalidate OS context to reg */
|
|
#define TM_SPC_PULL_POOL_CTX 0x828 /* Load32/Load64 Pull/Invalidate Pool context to reg*/
|
|
#define TM_SPC_ACK_HV_REG 0x830 /* Load16 ack HV irq to reg */
|
|
#define TM_SPC_PULL_USR_CTX_OL 0xc08 /* Store8 Pull/Inval usr ctx to odd line */
|
|
#define TM_SPC_ACK_OS_EL 0xc10 /* Store8 ack OS irq to even line */
|
|
#define TM_SPC_ACK_HV_POOL_EL 0xc20 /* Store8 ack HV evt pool to even line */
|
|
#define TM_SPC_ACK_HV_EL 0xc30 /* Store8 ack HV irq to even line */
|
|
/* XXX more... */
|
|
|
|
/* NSR fields for the various QW ack types */
|
|
#define TM_QW0_NSR_EB PPC_BIT8(0)
|
|
#define TM_QW1_NSR_EO PPC_BIT8(0)
|
|
#define TM_QW3_NSR_HE PPC_BITMASK8(0,1)
|
|
#define TM_QW3_NSR_HE_NONE 0
|
|
#define TM_QW3_NSR_HE_POOL 1
|
|
#define TM_QW3_NSR_HE_PHYS 2
|
|
#define TM_QW3_NSR_HE_LSI 3
|
|
#define TM_QW3_NSR_I PPC_BIT8(2)
|
|
#define TM_QW3_NSR_GRP_LVL PPC_BIT8(3,7)
|
|
|
|
#endif /* _ASM_POWERPC_XIVE_REGS_H */
|