08eb2e0c08
The WDT timer ticks quite fast (half of the CPU clock speed, which may be between 198MHz and 330MHz (or 400MHz on newer boards)). Given it's size of 32Bit, the maximum timeout value ranges from about 21s to 43s, depending on the configured CPU clock speed. This patch add's the timeout module parameter and checks that it's not bigger then the maximum timeout for the given clock speed. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
330 lines
7.9 KiB
C
330 lines
7.9 KiB
C
/*
|
|
* IDT Interprise 79RC32434 watchdog driver
|
|
*
|
|
* Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org>
|
|
* Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
|
|
*
|
|
* based on
|
|
* SoftDog 0.05: A Software Watchdog Device
|
|
*
|
|
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h> /* For module specific items */
|
|
#include <linux/moduleparam.h> /* For new moduleparam's */
|
|
#include <linux/types.h> /* For standard types (like size_t) */
|
|
#include <linux/errno.h> /* For the -ENODEV/... values */
|
|
#include <linux/kernel.h> /* For printk/panic/... */
|
|
#include <linux/fs.h> /* For file operations */
|
|
#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV
|
|
(WATCHDOG_MINOR) */
|
|
#include <linux/watchdog.h> /* For the watchdog specific items */
|
|
#include <linux/init.h> /* For __init/__exit/... */
|
|
#include <linux/platform_device.h> /* For platform_driver framework */
|
|
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
|
|
|
|
#include <asm/mach-rc32434/integ.h> /* For the Watchdog registers */
|
|
|
|
#define PFX KBUILD_MODNAME ": "
|
|
|
|
#define VERSION "0.5"
|
|
|
|
static struct {
|
|
unsigned long inuse;
|
|
} rc32434_wdt_device;
|
|
|
|
static struct integ __iomem *wdt_reg;
|
|
|
|
static int expect_close;
|
|
|
|
/* Board internal clock speed in Hz,
|
|
* the watchdog timer ticks at. */
|
|
extern unsigned int idt_cpu_freq;
|
|
|
|
/* translate wtcompare value to seconds and vice versa */
|
|
#define WTCOMP2SEC(x) (x / idt_cpu_freq)
|
|
#define SEC2WTCOMP(x) (x * idt_cpu_freq)
|
|
|
|
/* Use a default timeout of 20s. This should be
|
|
* safe for CPU clock speeds up to 400MHz, as
|
|
* ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */
|
|
#define WATCHDOG_TIMEOUT 20
|
|
|
|
static int timeout = WATCHDOG_TIMEOUT;
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default="
|
|
WATCHDOG_TIMEOUT ")");
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
/* apply or and nand masks to data read from addr and write back */
|
|
#define SET_BITS(addr, or, nand) \
|
|
writel((readl(&addr) | or) & ~nand, &addr)
|
|
|
|
static int rc32434_wdt_set(int new_timeout)
|
|
{
|
|
int max_to = WTCOMP2SEC((u32)-1);
|
|
|
|
if (new_timeout < 0 || new_timeout > max_to) {
|
|
printk(KERN_ERR PFX "timeout value must be between 0 and %d",
|
|
max_to);
|
|
return -EINVAL;
|
|
}
|
|
timeout = new_timeout;
|
|
writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rc32434_wdt_start(void)
|
|
{
|
|
u32 or, nand;
|
|
|
|
/* zero the counter before enabling */
|
|
writel(0, &wdt_reg->wtcount);
|
|
|
|
/* don't generate a non-maskable interrupt,
|
|
* do a warm reset instead */
|
|
nand = 1 << RC32434_ERR_WNE;
|
|
or = 1 << RC32434_ERR_WRE;
|
|
|
|
/* reset the ERRCS timeout bit in case it's set */
|
|
nand |= 1 << RC32434_ERR_WTO;
|
|
|
|
SET_BITS(wdt_reg->errcs, or, nand);
|
|
|
|
/* set the timeout (either default or based on module param) */
|
|
rc32434_wdt_set(timeout);
|
|
|
|
/* reset WTC timeout bit and enable WDT */
|
|
nand = 1 << RC32434_WTC_TO;
|
|
or = 1 << RC32434_WTC_EN;
|
|
|
|
SET_BITS(wdt_reg->wtc, or, nand);
|
|
|
|
printk(KERN_INFO PFX "Started watchdog timer.\n");
|
|
}
|
|
|
|
static void rc32434_wdt_stop(void)
|
|
{
|
|
/* Disable WDT */
|
|
SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
|
|
|
|
printk(KERN_INFO PFX "Stopped watchdog timer.\n");
|
|
}
|
|
|
|
static void rc32434_wdt_ping(void)
|
|
{
|
|
writel(0, &wdt_reg->wtcount);
|
|
}
|
|
|
|
static int rc32434_wdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &rc32434_wdt_device.inuse))
|
|
return -EBUSY;
|
|
|
|
if (nowayout)
|
|
__module_get(THIS_MODULE);
|
|
|
|
rc32434_wdt_start();
|
|
rc32434_wdt_ping();
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int rc32434_wdt_release(struct inode *inode, struct file *file)
|
|
{
|
|
if (expect_close == 42) {
|
|
rc32434_wdt_stop();
|
|
module_put(THIS_MODULE);
|
|
} else {
|
|
printk(KERN_CRIT PFX
|
|
"device closed unexpectedly. WDT will not stop!\n");
|
|
rc32434_wdt_ping();
|
|
}
|
|
clear_bit(0, &rc32434_wdt_device.inuse);
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t rc32434_wdt_write(struct file *file, const char *data,
|
|
size_t len, loff_t *ppos)
|
|
{
|
|
if (len) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
/* In case it was set long ago */
|
|
expect_close = 0;
|
|
|
|
for (i = 0; i != len; i++) {
|
|
char c;
|
|
if (get_user(c, data + i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
expect_close = 42;
|
|
}
|
|
}
|
|
rc32434_wdt_ping();
|
|
return len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
void __user *argp = (void __user *)arg;
|
|
int new_timeout;
|
|
unsigned int value;
|
|
static struct watchdog_info ident = {
|
|
.options = WDIOF_SETTIMEOUT |
|
|
WDIOF_KEEPALIVEPING |
|
|
WDIOF_MAGICCLOSE,
|
|
.identity = "RC32434_WDT Watchdog",
|
|
};
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
return -EFAULT;
|
|
break;
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
value = 0;
|
|
if (copy_to_user(argp, &value, sizeof(int)))
|
|
return -EFAULT;
|
|
break;
|
|
case WDIOC_SETOPTIONS:
|
|
if (copy_from_user(&value, argp, sizeof(int)))
|
|
return -EFAULT;
|
|
switch (value) {
|
|
case WDIOS_ENABLECARD:
|
|
rc32434_wdt_start();
|
|
break;
|
|
case WDIOS_DISABLECARD:
|
|
rc32434_wdt_stop();
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case WDIOC_KEEPALIVE:
|
|
rc32434_wdt_ping();
|
|
break;
|
|
case WDIOC_SETTIMEOUT:
|
|
if (copy_from_user(&new_timeout, argp, sizeof(int)))
|
|
return -EFAULT;
|
|
if (rc32434_wdt_set(new_timeout))
|
|
return -EINVAL;
|
|
/* Fall through */
|
|
case WDIOC_GETTIMEOUT:
|
|
return copy_to_user(argp, &timeout, sizeof(int));
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct file_operations rc32434_wdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = rc32434_wdt_write,
|
|
.unlocked_ioctl = rc32434_wdt_ioctl,
|
|
.open = rc32434_wdt_open,
|
|
.release = rc32434_wdt_release,
|
|
};
|
|
|
|
static struct miscdevice rc32434_wdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &rc32434_wdt_fops,
|
|
};
|
|
|
|
static char banner[] __devinitdata = KERN_INFO PFX
|
|
"Watchdog Timer version " VERSION ", timer margin: %d sec\n";
|
|
|
|
static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct resource *r;
|
|
|
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
|
|
if (!r) {
|
|
printk(KERN_ERR PFX "failed to retrieve resources\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
wdt_reg = ioremap_nocache(r->start, r->end - r->start);
|
|
if (!wdt_reg) {
|
|
printk(KERN_ERR PFX "failed to remap I/O resources\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Check that the heartbeat value is within it's range;
|
|
* if not reset to the default */
|
|
if (rc32434_wdt_set(timeout)) {
|
|
rc32434_wdt_set(WATCHDOG_TIMEOUT);
|
|
printk(KERN_INFO PFX
|
|
"timeout value must be between 0 and %d\n",
|
|
WTCOMP2SEC((u32)-1));
|
|
}
|
|
|
|
ret = misc_register(&rc32434_wdt_miscdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR PFX "failed to register watchdog device\n");
|
|
goto unmap;
|
|
}
|
|
|
|
printk(banner, timeout);
|
|
|
|
return 0;
|
|
|
|
unmap:
|
|
iounmap(wdt_reg);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
misc_deregister(&rc32434_wdt_miscdev);
|
|
iounmap(wdt_reg);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rc32434_wdt_driver = {
|
|
.probe = rc32434_wdt_probe,
|
|
.remove = __devexit_p(rc32434_wdt_remove),
|
|
.driver = {
|
|
.name = "rc32434_wdt",
|
|
}
|
|
};
|
|
|
|
static int __init rc32434_wdt_init(void)
|
|
{
|
|
return platform_driver_register(&rc32434_wdt_driver);
|
|
}
|
|
|
|
static void __exit rc32434_wdt_exit(void)
|
|
{
|
|
platform_driver_unregister(&rc32434_wdt_driver);
|
|
}
|
|
|
|
module_init(rc32434_wdt_init);
|
|
module_exit(rc32434_wdt_exit);
|
|
|
|
MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>,"
|
|
"Florian Fainelli <florian@openwrt.org>");
|
|
MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|