kevin/linux
1
Fork 0
Code
086ed117c9
linux/drivers/net/wireless/iwlwifi/iwl-4965.c
Mohamed Abbas ef850d7cb3 iwlcore: support ICT interrupt 
Add ICT interrupt handler support, ICT should improve CPU utilization
 since it does not require target read which is very expensive. This
 interrupt handler only added to 5000 cards and newer. Device will write
 interrupts to ICT shared table to inform driver about its interrupts.

These patches will not touch 3945 and 4965 interrupt handlers and tasklet.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22 14:06:05 -04:00

2340 lines
66 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
#include "iwl-calib.h"
#include "iwl-sta.h"
static int iwl4965_send_tx_power(struct iwl_priv *priv);
static int iwl4965_hw_get_temperature(const struct iwl_priv *priv);
/* Highest firmware API version supported */
#define IWL4965_UCODE_API_MAX 2
/* Lowest firmware API version supported */
#define IWL4965_UCODE_API_MIN 2
#define IWL4965_FW_PRE "iwlwifi-4965-"
#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
/* module parameters */
static struct iwl_mod_params iwl4965_mod_params = {
.num_of_queues = IWL49_NUM_QUEUES,
.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
.amsdu_size_8K = 1,
.restart_fw = 1,
/* the rest are 0 by default */
};
/* check contents of special bootstrap uCode SRAM */
static int iwl4965_verify_bsm(struct iwl_priv *priv)
{
__le32 *image = priv->ucode_boot.v_addr;
u32 len = priv->ucode_boot.len;
u32 reg;
u32 val;
IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
/* verify BSM SRAM contents */
val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
val = iwl_read_prph(priv, reg);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
BSM_SRAM_LOWER_BOUND,
reg - BSM_SRAM_LOWER_BOUND, len,
val, le32_to_cpu(*image));
return -EIO;
}
}
IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
return 0;
}
/**
* iwl4965_load_bsm - Load bootstrap instructions
*
* BSM operation:
*
* The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
* in special SRAM that does not power down during RFKILL. When powering back
* up after power-saving sleeps (or during initial uCode load), the BSM loads
* the bootstrap program into the on-board processor, and starts it.
*
* The bootstrap program loads (via DMA) instructions and data for a new
* program from host DRAM locations indicated by the host driver in the
* BSM_DRAM_* registers. Once the new program is loaded, it starts
* automatically.
*
* When initializing the NIC, the host driver points the BSM to the
* "initialize" uCode image. This uCode sets up some internal data, then
* notifies host via "initialize alive" that it is complete.
*
* The host then replaces the BSM_DRAM_* pointer values to point to the
* normal runtime uCode instructions and a backup uCode data cache buffer
* (filled initially with starting data values for the on-board processor),
* then triggers the "initialize" uCode to load and launch the runtime uCode,
* which begins normal operation.
*
* When doing a power-save shutdown, runtime uCode saves data SRAM into
* the backup data cache in DRAM before SRAM is powered down.
*
* When powering back up, the BSM loads the bootstrap program. This reloads
* the runtime uCode instructions and the backup data cache into SRAM,
* and re-launches the runtime uCode from where it left off.
*/
static int iwl4965_load_bsm(struct iwl_priv *priv)
{
__le32 *image = priv->ucode_boot.v_addr;
u32 len = priv->ucode_boot.len;
dma_addr_t pinst;
dma_addr_t pdata;
u32 inst_len;
u32 data_len;
int i;
u32 done;
u32 reg_offset;
int ret;
IWL_DEBUG_INFO(priv, "Begin load bsm\n");
priv->ucode_type = UCODE_RT;
/* make sure bootstrap program is no larger than BSM's SRAM size */
if (len > IWL49_MAX_BSM_SIZE)
return -EINVAL;
/* Tell bootstrap uCode where to find the "Initialize" uCode
* in host DRAM ... host DRAM physical address bits 35:4 for 4965.
* NOTE: iwl_init_alive_start() will replace these values,
* after the "initialize" uCode has run, to point to
* runtime/protocol instructions and backup data cache.
*/
pinst = priv->ucode_init.p_addr >> 4;
pdata = priv->ucode_init_data.p_addr >> 4;
inst_len = priv->ucode_init.len;
data_len = priv->ucode_init_data.len;
iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
_iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
ret = iwl4965_verify_bsm(priv);
if (ret)
return ret;
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
iwl_write_prph(priv, BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
}
if (i < 100)
IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
else {
IWL_ERR(priv, "BSM write did not complete!\n");
return -EIO;
}
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
return 0;
}
/**
* iwl4965_set_ucode_ptrs - Set uCode address location
*
* Tell initialization uCode where to find runtime uCode.
*
* BSM registers initially contain pointers to initialization uCode.
* We need to replace them to load runtime uCode inst and data,
* and to save runtime data when powering down.
*/
static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
{
dma_addr_t pinst;
dma_addr_t pdata;
int ret = 0;
/* bits 35:4 for 4965 */
pinst = priv->ucode_code.p_addr >> 4;
pdata = priv->ucode_data_backup.p_addr >> 4;
/* Tell bootstrap uCode where to find image to load */
iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
priv->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
priv->ucode_code.len | BSM_DRAM_INST_LOAD);
IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
return ret;
}
/**
* iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
*
* Called after REPLY_ALIVE notification received from "initialize" uCode.
*
* The 4965 "initialize" ALIVE reply contains calibration data for:
* Voltage, temperature, and MIMO tx gain correction, now stored in priv
* (3945 does not contain this data).
*
* Tell "initialize" uCode to go ahead and load the runtime uCode.
*/
static void iwl4965_init_alive_start(struct iwl_priv *priv)
{
/* Check alive response for "valid" sign from uCode */
if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
goto restart;
}
/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "initialize" alive if code weren't properly loaded. */
if (iwl_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
goto restart;
}
/* Calculate temperature */
priv->temperature = iwl4965_hw_get_temperature(priv);
/* Send pointers to protocol/runtime uCode image ... init code will
* load and launch runtime uCode, which will send us another "Alive"
* notification. */
IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
if (iwl4965_set_ucode_ptrs(priv)) {
/* Runtime instruction load won't happen;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
goto restart;
}
return;
restart:
queue_work(priv->workqueue, &priv->restart);
}
static bool is_fat_channel(__le32 rxon_flags)
{
int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
>> RXON_FLG_CHANNEL_MODE_POS;
return ((chan_mod == CHANNEL_MODE_PURE_40) ||
(chan_mod == CHANNEL_MODE_MIXED));
}
/*
* EEPROM handlers
*/
static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
{
return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
}
/*
* Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
* must be called under priv->lock and mac access
*/
static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
{
iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
}
static int iwl4965_apm_init(struct iwl_priv *priv)
{
int ret = 0;
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
/* set "initialization complete" bit to move adapter
* D0U* --> D0A* state */
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
/* wait for clock stabilization */
ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (ret < 0) {
IWL_DEBUG_INFO(priv, "Failed to init the card\n");
goto out;
}
/* enable DMA */
iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
APMG_CLK_VAL_BSM_CLK_RQT);
udelay(20);
/* disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
out:
return ret;
}
static void iwl4965_nic_config(struct iwl_priv *priv)
{
unsigned long flags;
u16 radio_cfg;
u16 lctl;
spin_lock_irqsave(&priv->lock, flags);
lctl = iwl_pcie_link_ctl(priv);
/* HW bug W/A - negligible power consumption */
/* L1-ASPM is enabled by BIOS */
if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
/* L1-ASPM enabled: disable L0S */
iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
else
/* L1-ASPM disabled: enable L0S */
iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
priv->calib_info = (struct iwl_eeprom_calib_info *)
iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
spin_unlock_irqrestore(&priv->lock, flags);
}
static int iwl4965_apm_stop_master(struct iwl_priv *priv)
{
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
/* set stop master bit */
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
iwl_poll_direct_bit(priv, CSR_RESET,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
spin_unlock_irqrestore(&priv->lock, flags);
IWL_DEBUG_INFO(priv, "stop master\n");
return 0;
}
static void iwl4965_apm_stop(struct iwl_priv *priv)
{
unsigned long flags;
iwl4965_apm_stop_master(priv);
spin_lock_irqsave(&priv->lock, flags);
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
/* clear "init complete" move adapter D0A* --> D0U state */
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
spin_unlock_irqrestore(&priv->lock, flags);
}
static int iwl4965_apm_reset(struct iwl_priv *priv)
{
int ret = 0;
iwl4965_apm_stop_master(priv);
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
/* FIXME: put here L1A -L0S w/a */
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (ret < 0)
goto out;
udelay(10);
/* Enable DMA and BSM Clock */
iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
APMG_CLK_VAL_BSM_CLK_RQT);
udelay(10);
/* disable L1A */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
out:
return ret;
}
/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
* Called after every association, but this runs only once!
* ... once chain noise is calibrated the first time, it's good forever. */
static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
{
struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
struct iwl_calib_diff_gain_cmd cmd;
memset(&cmd, 0, sizeof(cmd));
cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
cmd.diff_gain_a = 0;
cmd.diff_gain_b = 0;
cmd.diff_gain_c = 0;
if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
sizeof(cmd), &cmd))
IWL_ERR(priv,
"Could not send REPLY_PHY_CALIBRATION_CMD\n");
data->state = IWL_CHAIN_NOISE_ACCUMULATE;
IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
}
}
static void iwl4965_gain_computation(struct iwl_priv *priv,
u32 *average_noise,
u16 min_average_noise_antenna_i,
u32 min_average_noise)
{
int i, ret;
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
data->delta_gain_code[min_average_noise_antenna_i] = 0;
for (i = 0; i < NUM_RX_CHAINS; i++) {
s32 delta_g = 0;
if (!(data->disconn_array[i]) &&
(data->delta_gain_code[i] ==
CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
delta_g = average_noise[i] - min_average_noise;
data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
data->delta_gain_code[i] =
min(data->delta_gain_code[i],
(u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
data->delta_gain_code[i] =
(data->delta_gain_code[i] | (1 << 2));
} else {
data->delta_gain_code[i] = 0;
}
}
IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n",
data->delta_gain_code[0],
data->delta_gain_code[1],
data->delta_gain_code[2]);
/* Differential gain gets sent to uCode only once */
if (!data->radio_write) {
struct iwl_calib_diff_gain_cmd cmd;
data->radio_write = 1;
memset(&cmd, 0, sizeof(cmd));
cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
cmd.diff_gain_a = data->delta_gain_code[0];
cmd.diff_gain_b = data->delta_gain_code[1];
cmd.diff_gain_c = data->delta_gain_code[2];
ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
sizeof(cmd), &cmd);
if (ret)
IWL_DEBUG_CALIB(priv, "fail sending cmd "
"REPLY_PHY_CALIBRATION_CMD \n");
/* TODO we might want recalculate
* rx_chain in rxon cmd */
/* Mark so we run this algo only once! */
data->state = IWL_CHAIN_NOISE_CALIBRATED;
}
data->chain_noise_a = 0;
data->chain_noise_b = 0;
data->chain_noise_c = 0;
data->chain_signal_a = 0;
data->chain_signal_b = 0;
data->chain_signal_c = 0;
data->beacon_count = 0;
}
static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
__le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
*tx_flags |= TX_CMD_FLG_RTS_MSK;
*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
*tx_flags |= TX_CMD_FLG_CTS_MSK;
}
}
static void iwl4965_bg_txpower_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
txpower_work);
/* If a scan happened to start before we got here
* then just return; the statistics notification will
* kick off another scheduled work to compensate for
* any temperature delta we missed here. */
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
return;
mutex_lock(&priv->mutex);
/* Regardless of if we are associated, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
* not associated */
iwl4965_send_tx_power(priv);
/* Update last_temperature to keep is_calib_needed from running
* when it isn't needed... */
priv->last_temperature = priv->temperature;
mutex_unlock(&priv->mutex);
}
/*
* Acquire priv->lock before calling this function !
*/
static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
{
iwl_write_direct32(priv, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
}
/**
* iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
* @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
* @scd_retry: (1) Indicates queue will be used in aggregation mode
*
* NOTE: Acquire priv->lock before calling this function !
*/
static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
int tx_fifo_id, int scd_retry)
{
int txq_id = txq->q.id;
/* Find out whether to activate Tx queue */
int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
/* Set up and activate */
iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
(scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
(scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
IWL49_SCD_QUEUE_STTS_REG_MSK);
txq->sched_retry = scd_retry;
IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
active ? "Activate" : "Deactivate",
scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
}
static const u16 default_queue_to_tx_fifo[] = {
IWL_TX_FIFO_AC3,
IWL_TX_FIFO_AC2,
IWL_TX_FIFO_AC1,
IWL_TX_FIFO_AC0,
IWL49_CMD_FIFO_NUM,
IWL_TX_FIFO_HCCA_1,
IWL_TX_FIFO_HCCA_2
};
static int iwl4965_alive_notify(struct iwl_priv *priv)
{
u32 a;
unsigned long flags;
int i, chan;
u32 reg_val;
spin_lock_irqsave(&priv->lock, flags);
/* Clear 4965's internal Tx Scheduler data base */
priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
iwl_write_targ_mem(priv, a, 0);
for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
iwl_write_targ_mem(priv, a, 0);
/* Tel 4965 where to find Tx byte count tables */
iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
priv->scd_bc_tbls.dma >> 10);
/* Enable DMA channel */
for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
/* Update FH chicken bits */
reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
/* Disable chain mode for all queues */
iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
/* Initialize each Tx queue (including the command queue) */
for (i = 0; i < priv->hw_params.max_txq_num; i++) {
/* TFD circular buffer read/write indexes */
iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
/* Max Tx Window size for Scheduler-ACK mode */
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
(SCD_WIN_SIZE <<
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
/* Frame limit */
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
sizeof(u32),
(SCD_FRAME_LIMIT <<
IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
}
iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
(1 << priv->hw_params.max_txq_num) - 1);
/* Activate all Tx DMA/FIFO channels */
priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6));
iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
/* Map each Tx/cmd queue to its corresponding fifo */
for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
int ac = default_queue_to_tx_fifo[i];
iwl_txq_ctx_activate(priv, i);
iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0,
.auto_corr_min_ofdm = 85,
.auto_corr_min_ofdm_mrc = 170,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 220,
.auto_corr_max_ofdm = 120,
.auto_corr_max_ofdm_mrc = 210,
.auto_corr_max_ofdm_x1 = 140,
.auto_corr_max_ofdm_mrc_x1 = 270,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 200,
.auto_corr_min_cck_mrc = 200,
.auto_corr_max_cck_mrc = 400,
.nrg_th_cck = 100,
.nrg_th_ofdm = 100,
};
static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
{
/* want Kelvin */
priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
}
/**
* iwl4965_hw_set_hw_params
*
* Called when initializing driver
*/
static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
{
if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
(priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
IWL_ERR(priv,
"invalid queues_num, should be between %d and %d\n",
IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
return -EINVAL;
}
priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
priv->hw_params.scd_bc_tbls_size =
IWL49_NUM_QUEUES * sizeof(struct iwl4965_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
priv->hw_params.max_stations = IWL4965_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = 2;
priv->hw_params.rx_chains_num = 2;
priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
priv->hw_params.sens = &iwl4965_sensitivity;
return 0;
}
static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
{
s32 sign = 1;
if (num < 0) {
sign = -sign;
num = -num;
}
if (denom < 0) {
sign = -sign;
denom = -denom;
}
*res = 1;
*res = ((num * 2 + denom) / (denom * 2)) * sign;
return 1;
}
/**
* iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
*
* Determines power supply voltage compensation for txpower calculations.
* Returns number of 1/2-dB steps to subtract from gain table index,
* to compensate for difference between power supply voltage during
* factory measurements, vs. current power supply voltage.
*
* Voltage indication is higher for lower voltage.
* Lower voltage requires more gain (lower gain table index).
*/
static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
s32 current_voltage)
{
s32 comp = 0;
if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
(TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
return 0;
iwl4965_math_div_round(current_voltage - eeprom_voltage,
TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
if (current_voltage > eeprom_voltage)
comp *= 2;
if ((comp < -2) || (comp > 2))
comp = 0;
return comp;
}
static s32 iwl4965_get_tx_atten_grp(u16 channel)
{
if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
return CALIB_CH_GROUP_5;
if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
return CALIB_CH_GROUP_1;
if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
return CALIB_CH_GROUP_2;
if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
return CALIB_CH_GROUP_3;
if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
return CALIB_CH_GROUP_4;
return -1;
}
static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
{
s32 b = -1;
for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
if (priv->calib_info->band_info[b].ch_from == 0)
continue;
if ((channel >= priv->calib_info->band_info[b].ch_from)
&& (channel <= priv->calib_info->band_info[b].ch_to))
break;
}
return b;
}
static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
{
s32 val;
if (x2 == x1)
return y1;
else {
iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
return val + y2;
}
}
/**
* iwl4965_interpolate_chan - Interpolate factory measurements for one channel
*
* Interpolates factory measurements from the two sample channels within a
* sub-band, to apply to channel of interest. Interpolation is proportional to
* differences in channel frequencies, which is proportional to differences
* in channel number.
*/
static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
struct iwl_eeprom_calib_ch_info *chan_info)
{
s32 s = -1;
u32 c;
u32 m;
const struct iwl_eeprom_calib_measure *m1;
const struct iwl_eeprom_calib_measure *m2;
struct iwl_eeprom_calib_measure *omeas;
u32 ch_i1;
u32 ch_i2;
s = iwl4965_get_sub_band(priv, channel);
if (s >= EEPROM_TX_POWER_BANDS) {
IWL_ERR(priv, "Tx Power can not find channel %d\n", channel);
return -1;
}
ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
chan_info->ch_num = (u8) channel;
IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n",
channel, s, ch_i1, ch_i2);
for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
m1 = &(priv->calib_info->band_info[s].ch1.
measurements[c][m]);
m2 = &(priv->calib_info->band_info[s].ch2.
measurements[c][m]);
omeas = &(chan_info->measurements[c][m]);
omeas->actual_pow =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->actual_pow,
ch_i2,
m2->actual_pow);
omeas->gain_idx =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->gain_idx, ch_i2,
m2->gain_idx);
omeas->temperature =
(u8) iwl4965_interpolate_value(channel, ch_i1,
m1->temperature,
ch_i2,
m2->temperature);
omeas->pa_det =
(s8) iwl4965_interpolate_value(channel, ch_i1,
m1->pa_det, ch_i2,
m2->pa_det);
IWL_DEBUG_TXPOWER(priv,
"chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
m1->actual_pow, m2->actual_pow, omeas->actual_pow);
IWL_DEBUG_TXPOWER(priv,
"chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
m1->gain_idx, m2->gain_idx, omeas->gain_idx);
IWL_DEBUG_TXPOWER(priv,
"chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
m1->pa_det, m2->pa_det, omeas->pa_det);
IWL_DEBUG_TXPOWER(priv,
"chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
m1->temperature, m2->temperature,
omeas->temperature);
}
}
return 0;
}
/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
* for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
static s32 back_off_table[] = {
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
10 /* CCK */
};
/* Thermal compensation values for txpower for various frequency ranges ...
* ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
static struct iwl4965_txpower_comp_entry {
s32 degrees_per_05db_a;
s32 degrees_per_05db_a_denom;
} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
{9, 2}, /* group 0 5.2, ch 34-43 */
{4, 1}, /* group 1 5.2, ch 44-70 */
{4, 1}, /* group 2 5.2, ch 71-124 */
{4, 1}, /* group 3 5.2, ch 125-200 */
{3, 1} /* group 4 2.4, ch all */
};
static s32 get_min_power_index(s32 rate_power_index, u32 band)
{
if (!band) {
if ((rate_power_index & 7) <= 4)
return MIN_TX_GAIN_INDEX_52GHZ_EXT;
}
return MIN_TX_GAIN_INDEX;
}
struct gain_entry {
u8 dsp;
u8 radio;
};
static const struct gain_entry gain_table[2][108] = {
/* 5.2GHz power gain index table */
{
{123, 0x3F}, /* highest txpower */
{117, 0x3F},
{110, 0x3F},
{104, 0x3F},
{98, 0x3F},
{110, 0x3E},
{104, 0x3E},
{98, 0x3E},
{110, 0x3D},
{104, 0x3D},
{98, 0x3D},
{110, 0x3C},
{104, 0x3C},
{98, 0x3C},
{110, 0x3B},
{104, 0x3B},
{98, 0x3B},
{110, 0x3A},
{104, 0x3A},
{98, 0x3A},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x25},
{104, 0x25},
{98, 0x25},
{110, 0x24},
{104, 0x24},
{98, 0x24},
{110, 0x23},
{104, 0x23},
{98, 0x23},
{110, 0x22},
{104, 0x18},
{98, 0x18},
{110, 0x17},
{104, 0x17},
{98, 0x17},
{110, 0x16},
{104, 0x16},
{98, 0x16},
{110, 0x15},
{104, 0x15},
{98, 0x15},
{110, 0x14},
{104, 0x14},
{98, 0x14},
{110, 0x13},
{104, 0x13},
{98, 0x13},
{110, 0x12},
{104, 0x08},
{98, 0x08},
{110, 0x07},
{104, 0x07},
{98, 0x07},
{110, 0x06},
{104, 0x06},
{98, 0x06},
{110, 0x05},
{104, 0x05},
{98, 0x05},
{110, 0x04},
{104, 0x04},
{98, 0x04},
{110, 0x03},
{104, 0x03},
{98, 0x03},
{110, 0x02},
{104, 0x02},
{98, 0x02},
{110, 0x01},
{104, 0x01},
{98, 0x01},
{110, 0x00},
{104, 0x00},
{98, 0x00},
{93, 0x00},
{88, 0x00},
{83, 0x00},
{78, 0x00},
},
/* 2.4GHz power gain index table */
{
{110, 0x3f}, /* highest txpower */
{104, 0x3f},
{98, 0x3f},
{110, 0x3e},
{104, 0x3e},
{98, 0x3e},
{110, 0x3d},
{104, 0x3d},
{98, 0x3d},
{110, 0x3c},
{104, 0x3c},
{98, 0x3c},
{110, 0x3b},
{104, 0x3b},
{98, 0x3b},
{110, 0x3a},
{104, 0x3a},
{98, 0x3a},
{110, 0x39},
{104, 0x39},
{98, 0x39},
{110, 0x38},
{104, 0x38},
{98, 0x38},
{110, 0x37},
{104, 0x37},
{98, 0x37},
{110, 0x36},
{104, 0x36},
{98, 0x36},
{110, 0x35},
{104, 0x35},
{98, 0x35},
{110, 0x34},
{104, 0x34},
{98, 0x34},
{110, 0x33},
{104, 0x33},
{98, 0x33},
{110, 0x32},
{104, 0x32},
{98, 0x32},
{110, 0x31},
{104, 0x31},
{98, 0x31},
{110, 0x30},
{104, 0x30},
{98, 0x30},
{110, 0x6},
{104, 0x6},
{98, 0x6},
{110, 0x5},
{104, 0x5},
{98, 0x5},
{110, 0x4},
{104, 0x4},
{98, 0x4},
{110, 0x3},
{104, 0x3},
{98, 0x3},
{110, 0x2},
{104, 0x2},
{98, 0x2},
{110, 0x1},
{104, 0x1},
{98, 0x1},
{110, 0x0},
{104, 0x0},
{98, 0x0},
{97, 0},
{96, 0},
{95, 0},
{94, 0},
{93, 0},
{92, 0},
{91, 0},
{90, 0},
{89, 0},
{88, 0},
{87, 0},
{86, 0},
{85, 0},
{84, 0},
{83, 0},
{82, 0},
{81, 0},
{80, 0},
{79, 0},
{78, 0},
{77, 0},
{76, 0},
{75, 0},
{74, 0},
{73, 0},
{72, 0},
{71, 0},
{70, 0},
{69, 0},
{68, 0},
{67, 0},
{66, 0},
{65, 0},
{64, 0},
{63, 0},
{62, 0},
{61, 0},
{60, 0},
{59, 0},
}
};
static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
u8 is_fat, u8 ctrl_chan_high,
struct iwl4965_tx_power_db *tx_power_tbl)
{
u8 saturation_power;
s32 target_power;
s32 user_target_power;
s32 power_limit;
s32 current_temp;
s32 reg_limit;
s32 current_regulatory;
s32 txatten_grp = CALIB_CH_GROUP_MAX;
int i;
int c;
const struct iwl_channel_info *ch_info = NULL;
struct iwl_eeprom_calib_ch_info ch_eeprom_info;
const struct iwl_eeprom_calib_measure *measurement;
s16 voltage;
s32 init_voltage;
s32 voltage_compensation;
s32 degrees_per_05db_num;
s32 degrees_per_05db_denom;
s32 factory_temp;
s32 temperature_comp[2];
s32 factory_gain_index[2];
s32 factory_actual_pwr[2];
s32 power_index;
/* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
* are used for indexing into txpower table) */
user_target_power = 2 * priv->tx_power_user_lmt;
/* Get current (RXON) channel, band, width */
IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_fat %d\n", channel, band,
is_fat);
ch_info = iwl_get_channel_info(priv, priv->band, channel);
if (!is_channel_valid(ch_info))
return -EINVAL;
/* get txatten group, used to select 1) thermal txpower adjustment
* and 2) mimo txpower balance between Tx chains. */
txatten_grp = iwl4965_get_tx_atten_grp(channel);
if (txatten_grp < 0) {
IWL_ERR(priv, "Can't find txatten group for channel %d.\n",
channel);
return -EINVAL;
}
IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
channel, txatten_grp);
if (is_fat) {
if (ctrl_chan_high)
channel -= 2;
else
channel += 2;
}
/* hardware txpower limits ...
* saturation (clipping distortion) txpowers are in half-dBm */
if (band)
saturation_power = priv->calib_info->saturation_power24;
else
saturation_power = priv->calib_info->saturation_power52;
if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
saturation_power > IWL_TX_POWER_SATURATION_MAX) {
if (band)
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
else
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
}
/* regulatory txpower limits ... reg_limit values are in half-dBm,
* max_power_avg values are in dBm, convert * 2 */
if (is_fat)
reg_limit = ch_info->fat_max_power_avg * 2;
else
reg_limit = ch_info->max_power_avg * 2;
if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
(reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
if (band)
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
else
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
}
/* Interpolate txpower calibration values for this channel,
* based on factory calibration tests on spaced channels. */
iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
/* calculate tx gain adjustment based on power supply voltage */
voltage = priv->calib_info->voltage;
init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
voltage_compensation =
iwl4965_get_voltage_compensation(voltage, init_voltage);
IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n",
init_voltage,
voltage, voltage_compensation);
/* get current temperature (Celsius) */
current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
current_temp = KELVIN_TO_CELSIUS(current_temp);
/* select thermal txpower adjustment params, based on channel group
* (same frequency group used for mimo txatten adjustment) */
degrees_per_05db_num =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
degrees_per_05db_denom =
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
/* get per-chain txpower values from factory measurements */
for (c = 0; c < 2; c++) {
measurement = &ch_eeprom_info.measurements[c][1];
/* txgain adjustment (in half-dB steps) based on difference
* between factory and current temperature */
factory_temp = measurement->temperature;
iwl4965_math_div_round((current_temp - factory_temp) *
degrees_per_05db_denom,
degrees_per_05db_num,
&temperature_comp[c]);
factory_gain_index[c] = measurement->gain_idx;
factory_actual_pwr[c] = measurement->actual_pow;
IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c);
IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, "
"curr tmp %d, comp %d steps\n",
factory_temp, current_temp,
temperature_comp[c]);
IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n",
factory_gain_index[c],
factory_actual_pwr[c]);
}
/* for each of 33 bit-rates (including 1 for CCK) */
for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
u8 is_mimo_rate;
union iwl4965_tx_power_dual_stream tx_power;
/* for mimo, reduce each chain's txpower by half
* (3dB, 6 steps), so total output power is regulatory
* compliant. */
if (i & 0x8) {
current_regulatory = reg_limit -
IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
is_mimo_rate = 1;
} else {
current_regulatory = reg_limit;
is_mimo_rate = 0;
}
/* find txpower limit, either hardware or regulatory */
power_limit = saturation_power - back_off_table[i];
if (power_limit > current_regulatory)
power_limit = current_regulatory;
/* reduce user's txpower request if necessary
* for this rate on this channel */
target_power = user_target_power;
if (target_power > power_limit)
target_power = power_limit;
IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n",
i, saturation_power - back_off_table[i],
current_regulatory, user_target_power,
target_power);
/* for each of 2 Tx chains (radio transmitters) */
for (c = 0; c < 2; c++) {
s32 atten_value;
if (is_mimo_rate)
atten_value =
(s32)le32_to_cpu(priv->card_alive_init.
tx_atten[txatten_grp][c]);
else
atten_value = 0;
/* calculate index; higher index means lower txpower */
power_index = (u8) (factory_gain_index[c] -
(target_power -
factory_actual_pwr[c]) -
temperature_comp[c] -
voltage_compensation +
atten_value);
/* IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n",
power_index); */
if (power_index < get_min_power_index(i, band))
power_index = get_min_power_index(i, band);
/* adjust 5 GHz index to support negative indexes */
if (!band)
power_index += 9;
/* CCK, rate 32, reduce txpower for CCK */
if (i == POWER_TABLE_CCK_ENTRY)
power_index +=
IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
/* stay within the table! */
if (power_index > 107) {
IWL_WARN(priv, "txpower index %d > 107\n",
power_index);
power_index = 107;
}
if (power_index < 0) {
IWL_WARN(priv, "txpower index %d < 0\n",
power_index);
power_index = 0;
}
/* fill txpower command for this rate/chain */
tx_power.s.radio_tx_gain[c] =
gain_table[band][power_index].radio;
tx_power.s.dsp_predis_atten[c] =
gain_table[band][power_index].dsp;
IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d "
"gain 0x%02x dsp %d\n",
c, atten_value, power_index,
tx_power.s.radio_tx_gain[c],
tx_power.s.dsp_predis_atten[c]);
} /* for each chain */
tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
} /* for each rate */
return 0;
}
/**
* iwl4965_send_tx_power - Configure the TXPOWER level user limit
*
* Uses the active RXON for channel, band, and characteristics (fat, high)
* The power limit is taken from priv->tx_power_user_lmt.
*/
static int iwl4965_send_tx_power(struct iwl_priv *priv)
{
struct iwl4965_txpowertable_cmd cmd = { 0 };
int ret;
u8 band = 0;
bool is_fat = false;
u8 ctrl_chan_high = 0;
if (test_bit(STATUS_SCANNING, &priv->status)) {
/* If this gets hit a lot, switch it to a BUG() and catch
* the stack trace to find out who is calling this during
* a scan. */
IWL_WARN(priv, "TX Power requested while scanning!\n");
return -EAGAIN;
}
band = priv->band == IEEE80211_BAND_2GHZ;
is_fat = is_fat_channel(priv->active_rxon.flags);
if (is_fat &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.channel = priv->active_rxon.channel;
ret = iwl4965_fill_txpower_tbl(priv, band,
le16_to_cpu(priv->active_rxon.channel),
is_fat, ctrl_chan_high, &cmd.tx_power);
if (ret)
goto out;
ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
out:
return ret;
}
static int iwl4965_send_rxon_assoc(struct iwl_priv *priv)
{
int ret = 0;
struct iwl4965_rxon_assoc_cmd rxon_assoc;
const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
if ((rxon1->flags == rxon2->flags) &&
(rxon1->filter_flags == rxon2->filter_flags) &&
(rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
(rxon1->ofdm_ht_single_stream_basic_rates ==
rxon2->ofdm_ht_single_stream_basic_rates) &&
(rxon1->ofdm_ht_dual_stream_basic_rates ==
rxon2->ofdm_ht_dual_stream_basic_rates) &&
(rxon1->rx_chain == rxon2->rx_chain) &&
(rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
return 0;
}
rxon_assoc.flags = priv->staging_rxon.flags;
rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
rxon_assoc.reserved = 0;
rxon_assoc.ofdm_ht_single_stream_basic_rates =
priv->staging_rxon.ofdm_ht_single_stream_basic_rates;
rxon_assoc.ofdm_ht_dual_stream_basic_rates =
priv->staging_rxon.ofdm_ht_dual_stream_basic_rates;
rxon_assoc.rx_chain_select_flags = priv->staging_rxon.rx_chain;
ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
sizeof(rxon_assoc), &rxon_assoc, NULL);
if (ret)
return ret;
return ret;
}
#ifdef IEEE80211_CONF_CHANNEL_SWITCH
static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
{
int rc;
u8 band = 0;
bool is_fat = false;
u8 ctrl_chan_high = 0;
struct iwl4965_channel_switch_cmd cmd = { 0 };
const struct iwl_channel_info *ch_info;
band = priv->band == IEEE80211_BAND_2GHZ;
ch_info = iwl_get_channel_info(priv, priv->band, channel);
is_fat = is_fat_channel(priv->staging_rxon.flags);
if (is_fat &&
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
ctrl_chan_high = 1;
cmd.band = band;
cmd.expect_beacon = 0;
cmd.channel = cpu_to_le16(channel);
cmd.rxon_flags = priv->active_rxon.flags;
cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else
cmd.expect_beacon = 1;
rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
ctrl_chan_high, &cmd.tx_power);
if (rc) {
IWL_DEBUG_11H(priv, "error:%d fill txpower_tbl\n", rc);
return rc;
}
rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
return rc;
}
#endif
/**
* iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
u16 byte_cnt)
{
struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
int txq_id = txq->q.id;
int write_ptr = txq->q.write_ptr;
int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
__le16 bc_ent;
WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
bc_ent = cpu_to_le16(len & 0xFFF);
/* Set up byte count within first 256 entries */
scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
/* If within first 64 entries, duplicate at end */
if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
scd_bc_tbl[txq_id].
tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
}
/**
* sign_extend - Sign extend a value using specified bit as sign-bit
*
* Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
* and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
*
* @param oper value to sign extend
* @param index 0 based bit index (0<=index<32) to sign bit
*/
static s32 sign_extend(u32 oper, int index)
{
u8 shift = 31 - index;
return (s32)(oper << shift) >> shift;
}
/**
* iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
* @statistics: Provides the temperature reading from the uCode
*
* A return of <0 indicates bogus data in the statistics
*/
static int iwl4965_hw_get_temperature(const struct iwl_priv *priv)
{
s32 temperature;
s32 vt;
s32 R1, R2, R3;
u32 R4;
if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
(priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
IWL_DEBUG_TEMP(priv, "Running FAT temperature calibration\n");
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
} else {
IWL_DEBUG_TEMP(priv, "Running temperature calibration\n");
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
}
/*
* Temperature is only 23 bits, so sign extend out to 32.
*
* NOTE If we haven't received a statistics notification yet
* with an updated temperature, use R4 provided to us in the
* "initialize" ALIVE response.
*/
if (!test_bit(STATUS_TEMPERATURE, &priv->status))
vt = sign_extend(R4, 23);
else
vt = sign_extend(
le32_to_cpu(priv->statistics.general.temperature), 23);
IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
if (R3 == R1) {
IWL_ERR(priv, "Calibration conflict R1 == R3\n");
return -1;
}
/* Calculate temperature in degrees Kelvin, adjust by 97%.
* Add offset to center the adjustment around 0 degrees Centigrade. */
temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
temperature /= (R3 - R1);
temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n",
temperature, KELVIN_TO_CELSIUS(temperature));
return temperature;
}
/* Adjust Txpower only if temperature variance is greater than threshold. */
#define IWL_TEMPERATURE_THRESHOLD 3
/**
* iwl4965_is_temp_calib_needed - determines if new calibration is needed
*
* If the temperature changed has changed sufficiently, then a recalibration
* is needed.
*
* Assumes caller will replace priv->last_temperature once calibration
* executed.
*/
static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
{
int temp_diff;
if (!test_bit(STATUS_STATISTICS, &priv->status)) {
IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n");
return 0;
}
temp_diff = priv->temperature - priv->last_temperature;
/* get absolute value */
if (temp_diff < 0) {
IWL_DEBUG_POWER(priv, "Getting cooler, delta %d, \n", temp_diff);
temp_diff = -temp_diff;
} else if (temp_diff == 0)
IWL_DEBUG_POWER(priv, "Same temp, \n");
else
IWL_DEBUG_POWER(priv, "Getting warmer, delta %d, \n", temp_diff);
if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
IWL_DEBUG_POWER(priv, "Thermal txpower calib not needed\n");
return 0;
}
IWL_DEBUG_POWER(priv, "Thermal txpower calib needed\n");
return 1;
}
static void iwl4965_temperature_calib(struct iwl_priv *priv)
{
s32 temp;
temp = iwl4965_hw_get_temperature(priv);
if (temp < 0)
return;
if (priv->temperature != temp) {
if (priv->temperature)
IWL_DEBUG_TEMP(priv, "Temperature changed "
"from %dC to %dC\n",
KELVIN_TO_CELSIUS(priv->temperature),
KELVIN_TO_CELSIUS(temp));
else
IWL_DEBUG_TEMP(priv, "Temperature "
"initialized to %dC\n",
KELVIN_TO_CELSIUS(temp));
}
priv->temperature = temp;
set_bit(STATUS_TEMPERATURE, &priv->status);
if (!priv->disable_tx_power_cal &&
unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
iwl4965_is_temp_calib_needed(priv))
queue_work(priv->workqueue, &priv->txpower_work);
}
/**
* iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
*/
static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
u16 txq_id)
{
/* Simply stop the queue, but don't change any configuration;
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
iwl_write_prph(priv,
IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
(1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}
/**
* txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
* priv->lock must be held by the caller
*/
static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
u16 ssn_idx, u8 tx_fifo)
{
if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
(IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
IWL_WARN(priv,
"queue number out of range: %d, must be %d to %d\n",
txq_id, IWL49_FIRST_AMPDU_QUEUE,
IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
return -EINVAL;
}
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
/* supposes that ssn_idx is valid (!= 0xFFF) */
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
iwl_txq_ctx_deactivate(priv, txq_id);
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
return 0;
}
/**
* iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
*/
static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
u16 txq_id)
{
u32 tbl_dw_addr;
u32 tbl_dw;
u16 scd_q2ratid;
scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
tbl_dw_addr = priv->scd_base_addr +
IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
if (txq_id & 0x1)
tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
else
tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
return 0;
}
/**
* iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
*
* NOTE: txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
* i.e. it must be one of the higher queues used for aggregation
*/
static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
int tx_fifo, int sta_id, int tid, u16 ssn_idx)
{
unsigned long flags;
u16 ra_tid;
if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
(IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
IWL_WARN(priv,
"queue number out of range: %d, must be %d to %d\n",
txq_id, IWL49_FIRST_AMPDU_QUEUE,
IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
return -EINVAL;
}
ra_tid = BUILD_RAxTID(sta_id, tid);
/* Modify device's station table to Tx this TID */
iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
spin_lock_irqsave(&priv->lock, flags);
/* Stop this Tx queue before configuring it */
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
/* Map receiver-address / traffic-ID to this queue */
iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
/* Set this queue as a chain-building queue */
iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
/* Place first TFD at index corresponding to start sequence number.
* Assumes that ssn_idx is valid (!= 0xFFF) */
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
/* Set up Tx window size and frame limit for this queue */
iwl_write_targ_mem(priv,
priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
(SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
iwl_write_targ_mem(priv, priv->scd_base_addr +
IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
(SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
& IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
{
switch (cmd_id) {
case REPLY_RXON:
return (u16) sizeof(struct iwl4965_rxon_cmd);
default:
return len;
}
}
static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
{
struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
addsta->mode = cmd->mode;
memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
addsta->station_flags = cmd->station_flags;
addsta->station_flags_msk = cmd->station_flags_msk;
addsta->tid_disable_tx = cmd->tid_disable_tx;
addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
addsta->reserved1 = cpu_to_le16(0);
addsta->reserved2 = cpu_to_le32(0);
return (u16)sizeof(struct iwl4965_addsta_cmd);
}
static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
{
return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
}
/**
* iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
*/
static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
struct iwl_ht_agg *agg,
struct iwl4965_tx_resp *tx_resp,
int txq_id, u16 start_idx)
{
u16 status;
struct agg_tx_status *frame_status = tx_resp->u.agg_status;
struct ieee80211_tx_info *info = NULL;
struct ieee80211_hdr *hdr = NULL;
u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
int i, sh, idx;
u16 seq;
if (agg->wait_for_ba)
IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
agg->frame_count = tx_resp->frame_count;
agg->start_idx = start_idx;
agg->rate_n_flags = rate_n_flags;
agg->bitmap = 0;
/* num frames attempted by Tx command */
if (agg->frame_count == 1) {
/* Only one frame was attempted; no block-ack will arrive */
status = le16_to_cpu(frame_status[0].status);
idx = start_idx;
/* FIXME: code repetition */
IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
agg->frame_count, agg->start_idx, idx);
info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
info->flags |= iwl_is_tx_success(status) ?
IEEE80211_TX_STAT_ACK : 0;
iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
/* FIXME: code repetition end */
IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
status & 0xff, tx_resp->failure_frame);
IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
agg->wait_for_ba = 0;
} else {
/* Two or more frames were attempted; expect block-ack */
u64 bitmap = 0;
int start = agg->start_idx;
/* Construct bit-map of pending frames within Tx window */
for (i = 0; i < agg->frame_count; i++) {
u16 sc;
status = le16_to_cpu(frame_status[i].status);
seq = le16_to_cpu(frame_status[i].sequence);
idx = SEQ_TO_INDEX(seq);
txq_id = SEQ_TO_QUEUE(seq);
if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
AGG_TX_STATE_ABORT_MSK))
continue;
IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
IWL_ERR(priv,
"BUG_ON idx doesn't match seq control"
" idx=%d, seq_idx=%d, seq=%d\n",
idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
return -1;
}
IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
i, idx, SEQ_TO_SN(sc));
sh = idx - start;
if (sh > 64) {
sh = (start - idx) + 0xff;
bitmap = bitmap << sh;
sh = 0;
start = idx;
} else if (sh < -64)
sh = 0xff - (start - idx);
else if (sh < 0) {
sh = start - idx;
start = idx;
bitmap = bitmap << sh;
sh = 0;
}
bitmap |= 1ULL << sh;
IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
start, (unsigned long long)bitmap);
}
agg->bitmap = bitmap;
agg->start_idx = start;
IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
agg->frame_count, agg->start_idx,
(unsigned long long)agg->bitmap);
if (bitmap)
agg->wait_for_ba = 1;
}
return 0;
}
/**
* iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
*/
static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
u16 sequence = le16_to_cpu(pkt->hdr.sequence);
int txq_id = SEQ_TO_QUEUE(sequence);
int index = SEQ_TO_INDEX(sequence);
struct iwl_tx_queue *txq = &priv->txq[txq_id];
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *info;
struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
u32 status = le32_to_cpu(tx_resp->u.status);
int tid = MAX_TID_COUNT;
int sta_id;
int freed;
u8 *qc = NULL;
if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
"is out of range [0-%d] %d %d\n", txq_id,
index, txq->q.n_bd, txq->q.write_ptr,
txq->q.read_ptr);
return;
}
info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
memset(&info->status, 0, sizeof(info->status));
hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
if (ieee80211_is_data_qos(hdr->frame_control)) {
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
}
sta_id = iwl_get_ra_sta_id(priv, hdr);
if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
IWL_ERR(priv, "Station not known\n");
return;
}
if (txq->sched_retry) {
const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
struct iwl_ht_agg *agg = NULL;
WARN_ON(!qc);
agg = &priv->stations[sta_id].tid[tid].agg;
iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
/* check if BAR is needed */
if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
if (txq->q.read_ptr != (scd_ssn & 0xff)) {
index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
"%d index %d\n", scd_ssn , index);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
(agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
if (agg->state == IWL_AGG_OFF)
iwl_wake_queue(priv, txq_id);
else
iwl_wake_queue(priv, txq->swq_id);
}
}
} else {
info->status.rates[0].count = tx_resp->failure_frame + 1;
info->flags |= iwl_is_tx_success(status) ?
IEEE80211_TX_STAT_ACK : 0;
iwl_hwrate_to_tx_control(priv,
le32_to_cpu(tx_resp->rate_n_flags),
info);
IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) "
"rate_n_flags 0x%x retries %d\n",
txq_id,
iwl_get_tx_fail_reason(status), status,
le32_to_cpu(tx_resp->rate_n_flags),
tx_resp->failure_frame);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
if (qc && likely(sta_id != IWL_INVALID_STATION))
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
if (qc && likely(sta_id != IWL_INVALID_STATION))
iwl_txq_check_empty(priv, sta_id, tid, txq_id);
if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
IWL_ERR(priv, "TODO: Implement Tx ABORT REQUIRED!!!\n");
}
static int iwl4965_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp)
{
/* data from PHY/DSP regarding signal strength, etc.,
* contents are always there, not configurable by host. */
struct iwl4965_rx_non_cfg_phy *ncphy =
(struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
>> IWL49_AGC_DB_POS;
u32 valid_antennae =
(le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
>> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
u8 max_rssi = 0;
u32 i;
/* Find max rssi among 3 possible receivers.
* These values are measured by the digital signal processor (DSP).
* They should stay fairly constant even as the signal strength varies,
* if the radio's automatic gain control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info. */
for (i = 0; i < 3; i++)
if (valid_antennae & (1 << i))
max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
max_rssi, agc);
/* dBm = max_rssi dB - agc dB - constant.
* Higher AGC (higher radio gain) means lower signal. */
return max_rssi - agc - IWL49_RSSI_OFFSET;
}
/* Set up 4965-specific Rx frame reply handlers */
static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
{
/* Legacy Rx frames */
priv->rx_handlers[REPLY_RX] = iwl_rx_reply_rx;
/* Tx response */
priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
}
static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
{
INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
}
static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
{
cancel_work_sync(&priv->txpower_work);
}
static struct iwl_station_mgmt_ops iwl4965_station_mgmt = {
.add_station = iwl_add_station_flags,
.remove_station = iwl_remove_station,
.find_station = iwl_find_station,
.clear_station_table = iwl_clear_stations_table,
};
static struct iwl_hcmd_ops iwl4965_hcmd = {
.rxon_assoc = iwl4965_send_rxon_assoc,
.commit_rxon = iwl_commit_rxon,
.set_rxon_chain = iwl_set_rxon_chain,
};
static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
.get_hcmd_size = iwl4965_get_hcmd_size,
.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
.chain_noise_reset = iwl4965_chain_noise_reset,
.gain_computation = iwl4965_gain_computation,
.rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
.calc_rssi = iwl4965_calc_rssi,
};
static struct iwl_lib_ops iwl4965_lib = {
.set_hw_params = iwl4965_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
.txq_set_sched = iwl4965_txq_set_sched,
.txq_agg_enable = iwl4965_txq_agg_enable,
.txq_agg_disable = iwl4965_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl4965_rx_handler_setup,
.setup_deferred_work = iwl4965_setup_deferred_work,
.cancel_deferred_work = iwl4965_cancel_deferred_work,
.is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
.alive_notify = iwl4965_alive_notify,
.init_alive_start = iwl4965_init_alive_start,
.load_ucode = iwl4965_load_bsm,
.apm_ops = {
.init = iwl4965_apm_init,
.reset = iwl4965_apm_reset,
.stop = iwl4965_apm_stop,
.config = iwl4965_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_REGULATORY_BAND_1_CHANNELS,
EEPROM_REGULATORY_BAND_2_CHANNELS,
EEPROM_REGULATORY_BAND_3_CHANNELS,
EEPROM_REGULATORY_BAND_4_CHANNELS,
EEPROM_REGULATORY_BAND_5_CHANNELS,
EEPROM_4965_REGULATORY_BAND_24_FAT_CHANNELS,
EEPROM_4965_REGULATORY_BAND_52_FAT_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl4965_eeprom_calib_version,
.query_addr = iwlcore_eeprom_query_addr,
},
.send_tx_power = iwl4965_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.post_associate = iwl_post_associate,
.config_ap = iwl_config_ap,
.isr = iwl_isr_legacy,
.temp_ops = {
.temperature = iwl4965_temperature_calib,
.set_ct_kill = iwl4965_set_ct_threshold,
},
};
static struct iwl_ops iwl4965_ops = {
.lib = &iwl4965_lib,
.hcmd = &iwl4965_hcmd,
.utils = &iwl4965_hcmd_utils,
.smgmt = &iwl4965_station_mgmt,
};
struct iwl_cfg iwl4965_agn_cfg = {
.name = "4965AGN",
.fw_name_pre = IWL4965_FW_PRE,
.ucode_api_max = IWL4965_UCODE_API_MAX,
.ucode_api_min = IWL4965_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.eeprom_size = IWL4965_EEPROM_IMG_SIZE,
.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
.ops = &iwl4965_ops,
.mod_params = &iwl4965_mod_params,
.use_isr_legacy = true
};
/* Module firmware */
MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
MODULE_PARM_DESC(debug, "debug output mask");
module_param_named(
disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
/* 11n */
module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");
View Git Blame Copy Permalink