1
linux/drivers/net/ucc_geth_phy.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

786 lines
20 KiB
C

/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Author: Shlomi Gridish <gridish@freescale.com>
*
* Description:
* UCC GETH Driver -- PHY handling
*
* Changelog:
* Jun 28, 2006 Li Yang <LeoLi@freescale.com>
* - Rearrange code and style fixes
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include "ucc_geth.h"
#include "ucc_geth_phy.h"
#define ugphy_printk(level, format, arg...) \
printk(level format "\n", ## arg)
#define ugphy_dbg(format, arg...) \
ugphy_printk(KERN_DEBUG, format , ## arg)
#define ugphy_err(format, arg...) \
ugphy_printk(KERN_ERR, format , ## arg)
#define ugphy_info(format, arg...) \
ugphy_printk(KERN_INFO, format , ## arg)
#define ugphy_warn(format, arg...) \
ugphy_printk(KERN_WARNING, format , ## arg)
#ifdef UGETH_VERBOSE_DEBUG
#define ugphy_vdbg ugphy_dbg
#else
#define ugphy_vdbg(fmt, args...) do { } while (0)
#endif /* UGETH_VERBOSE_DEBUG */
static void config_genmii_advert(struct ugeth_mii_info *mii_info);
static void genmii_setup_forced(struct ugeth_mii_info *mii_info);
static void genmii_restart_aneg(struct ugeth_mii_info *mii_info);
static int gbit_config_aneg(struct ugeth_mii_info *mii_info);
static int genmii_config_aneg(struct ugeth_mii_info *mii_info);
static int genmii_update_link(struct ugeth_mii_info *mii_info);
static int genmii_read_status(struct ugeth_mii_info *mii_info);
static u16 ucc_geth_phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
{
u16 retval;
unsigned long flags;
ugphy_vdbg("%s: IN", __FUNCTION__);
spin_lock_irqsave(&mii_info->mdio_lock, flags);
retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
return retval;
}
static void ucc_geth_phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
{
unsigned long flags;
ugphy_vdbg("%s: IN", __FUNCTION__);
spin_lock_irqsave(&mii_info->mdio_lock, flags);
mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
}
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value)
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
struct ucc_mii_mng *mii_regs;
enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg) regnum;
u32 tmp_reg;
ugphy_vdbg("%s: IN", __FUNCTION__);
spin_lock_irq(&ugeth->lock);
mii_regs = ugeth->mii_info->mii_regs;
/* Set this UCC to be the master of the MII managment */
ucc_set_qe_mux_mii_mng(ugeth->ug_info->uf_info.ucc_num);
/* Stop the MII management read cycle */
out_be32(&mii_regs->miimcom, 0);
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32(&mii_regs->miimadd, tmp_reg);
/* Setting up the MII Mangement Control Register with the value */
out_be32(&mii_regs->miimcon, (u32) value);
/* Wait till MII management write is complete */
while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
cpu_relax();
spin_unlock_irq(&ugeth->lock);
udelay(10000);
}
/* Reads from register regnum in the PHY for device dev, */
/* returning the value. Clears miimcom first. All PHY */
/* configuration has to be done through the TSEC1 MIIM regs */
int read_phy_reg(struct net_device *dev, int mii_id, int regnum)
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
struct ucc_mii_mng *mii_regs;
enum enet_tbi_mii_reg mii_reg = (enum enet_tbi_mii_reg) regnum;
u32 tmp_reg;
u16 value;
ugphy_vdbg("%s: IN", __FUNCTION__);
spin_lock_irq(&ugeth->lock);
mii_regs = ugeth->mii_info->mii_regs;
/* Setting up the MII Mangement Address Register */
tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
out_be32(&mii_regs->miimadd, tmp_reg);
/* Perform an MII management read cycle */
out_be32(&mii_regs->miimcom, MIIMCOM_READ_CYCLE);
/* Wait till MII management write is complete */
while ((in_be32(&mii_regs->miimind)) & MIIMIND_BUSY)
cpu_relax();
udelay(10000);
/* Read MII management status */
value = (u16) in_be32(&mii_regs->miimstat);
out_be32(&mii_regs->miimcom, 0);
if (value == 0xffff)
ugphy_warn("read wrong value : mii_id %d,mii_reg %d, base %08x",
mii_id, mii_reg, (u32) & (mii_regs->miimcfg));
spin_unlock_irq(&ugeth->lock);
return (value);
}
void mii_clear_phy_interrupt(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->phyinfo->ack_interrupt)
mii_info->phyinfo->ack_interrupt(mii_info);
}
void mii_configure_phy_interrupt(struct ugeth_mii_info *mii_info,
u32 interrupts)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
mii_info->interrupts = interrupts;
if (mii_info->phyinfo->config_intr)
mii_info->phyinfo->config_intr(mii_info);
}
/* Writes MII_ADVERTISE with the appropriate values, after
* sanitizing advertise to make sure only supported features
* are advertised
*/
static void config_genmii_advert(struct ugeth_mii_info *mii_info)
{
u32 advertise;
u16 adv;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Only allow advertising what this PHY supports */
mii_info->advertising &= mii_info->phyinfo->features;
advertise = mii_info->advertising;
/* Setup standard advertisement */
adv = ucc_geth_phy_read(mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
if (advertise & ADVERTISED_10baseT_Full)
adv |= ADVERTISE_10FULL;
if (advertise & ADVERTISED_100baseT_Half)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
ucc_geth_phy_write(mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced(struct ugeth_mii_info *mii_info)
{
u16 ctrl;
u32 features = mii_info->phyinfo->features;
ugphy_vdbg("%s: IN", __FUNCTION__);
ctrl = ucc_geth_phy_read(mii_info, MII_BMCR);
ctrl &=
~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
ctrl |= BMCR_RESET;
switch (mii_info->speed) {
case SPEED_1000:
if (features & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
ctrl |= BMCR_SPEED1000;
break;
}
mii_info->speed = SPEED_100;
case SPEED_100:
if (features & (SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full)) {
ctrl |= BMCR_SPEED100;
break;
}
mii_info->speed = SPEED_10;
case SPEED_10:
if (features & (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full))
break;
default: /* Unsupported speed! */
ugphy_err("%s: Bad speed!", mii_info->dev->name);
break;
}
ucc_geth_phy_write(mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
static void genmii_restart_aneg(struct ugeth_mii_info *mii_info)
{
u16 ctl;
ugphy_vdbg("%s: IN", __FUNCTION__);
ctl = ucc_geth_phy_read(mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
ucc_geth_phy_write(mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg(struct ugeth_mii_info *mii_info)
{
u16 adv;
u32 advertise;
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->autoneg) {
/* Configure the ADVERTISE register */
config_genmii_advert(mii_info);
advertise = mii_info->advertising;
adv = ucc_geth_phy_read(mii_info, MII_1000BASETCONTROL);
adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
MII_1000BASETCONTROL_HALFDUPLEXCAP);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
ucc_geth_phy_write(mii_info, MII_1000BASETCONTROL, adv);
/* Start/Restart aneg */
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int genmii_config_aneg(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->autoneg) {
config_genmii_advert(mii_info);
genmii_restart_aneg(mii_info);
} else
genmii_setup_forced(mii_info);
return 0;
}
static int genmii_update_link(struct ugeth_mii_info *mii_info)
{
u16 status;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Do a fake read */
ucc_geth_phy_read(mii_info, MII_BMSR);
/* Read link and autonegotiation status */
status = ucc_geth_phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) == 0)
mii_info->link = 0;
else
mii_info->link = 1;
/* If we are autonegotiating, and not done,
* return an error */
if (mii_info->autoneg && !(status & BMSR_ANEGCOMPLETE))
return -EAGAIN;
return 0;
}
static int genmii_read_status(struct ugeth_mii_info *mii_info)
{
u16 status;
int err;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
if (mii_info->autoneg) {
status = ucc_geth_phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
if (status & (LPA_100FULL | LPA_100HALF))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
mii_info->pause = 0;
}
/* On non-aneg, we assume what we put in BMCR is the speed,
* though magic-aneg shouldn't prevent this case from occurring
*/
return 0;
}
static int marvell_init(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
ucc_geth_phy_write(mii_info, 0x14, 0x0cd2);
ucc_geth_phy_write(mii_info, 0x1b,
(ucc_geth_phy_read(mii_info, 0x1b) & ~0x000f) | 0x000b);
ucc_geth_phy_write(mii_info, MII_BMCR,
ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
msleep(4000);
return 0;
}
static int marvell_config_aneg(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
ucc_geth_phy_write(mii_info, MII_BMCR, BMCR_RESET);
ucc_geth_phy_write(mii_info, 0x1d, 0x1f);
ucc_geth_phy_write(mii_info, 0x1e, 0x200c);
ucc_geth_phy_write(mii_info, 0x1d, 0x5);
ucc_geth_phy_write(mii_info, 0x1e, 0);
ucc_geth_phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg(mii_info);
return 0;
}
static int marvell_read_status(struct ugeth_mii_info *mii_info)
{
u16 status;
int err;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = ucc_geth_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
/* Get the speed */
speed = status & MII_M1011_PHY_SPEC_STATUS_SPD_MASK;
switch (speed) {
case MII_M1011_PHY_SPEC_STATUS_1000:
mii_info->speed = SPEED_1000;
break;
case MII_M1011_PHY_SPEC_STATUS_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
mii_info->pause = 0;
}
return 0;
}
static int marvell_ack_interrupt(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Clear the interrupts by reading the reg */
ucc_geth_phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
static int marvell_config_intr(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return 0;
}
static int cis820x_init(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
ucc_geth_phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
MII_CIS8201_AUXCONSTAT_INIT);
ucc_geth_phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
return 0;
}
static int cis820x_read_status(struct ugeth_mii_info *mii_info)
{
u16 status;
int err;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
int speed;
status = ucc_geth_phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
speed = status & MII_CIS8201_AUXCONSTAT_SPEED;
switch (speed) {
case MII_CIS8201_AUXCONSTAT_GBIT:
mii_info->speed = SPEED_1000;
break;
case MII_CIS8201_AUXCONSTAT_100:
mii_info->speed = SPEED_100;
break;
default:
mii_info->speed = SPEED_10;
break;
}
}
return 0;
}
static int cis820x_ack_interrupt(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
ucc_geth_phy_read(mii_info, MII_CIS8201_ISTAT);
return 0;
}
static int cis820x_config_intr(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
else
ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, 0);
return 0;
}
#define DM9161_DELAY 10
static int dm9161_read_status(struct ugeth_mii_info *mii_info)
{
u16 status;
int err;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Update the link, but return if there
* was an error */
err = genmii_update_link(mii_info);
if (err)
return err;
/* If the link is up, read the speed and duplex */
/* If we aren't autonegotiating, assume speeds
* are as set */
if (mii_info->autoneg && mii_info->link) {
status = ucc_geth_phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
mii_info->speed = SPEED_10;
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_10F))
mii_info->duplex = DUPLEX_FULL;
else
mii_info->duplex = DUPLEX_HALF;
}
return 0;
}
static int dm9161_config_aneg(struct ugeth_mii_info *mii_info)
{
struct dm9161_private *priv = mii_info->priv;
ugphy_vdbg("%s: IN", __FUNCTION__);
if (0 == priv->resetdone)
return -EAGAIN;
return 0;
}
static void dm9161_timer(unsigned long data)
{
struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data;
struct dm9161_private *priv = mii_info->priv;
u16 status = ucc_geth_phy_read(mii_info, MII_BMSR);
ugphy_vdbg("%s: IN", __FUNCTION__);
if (status & BMSR_ANEGCOMPLETE) {
priv->resetdone = 1;
} else
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
}
static int dm9161_init(struct ugeth_mii_info *mii_info)
{
struct dm9161_private *priv;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Allocate the private data structure */
priv = kmalloc(sizeof(struct dm9161_private), GFP_KERNEL);
if (NULL == priv)
return -ENOMEM;
mii_info->priv = priv;
/* Reset is not done yet */
priv->resetdone = 0;
ucc_geth_phy_write(mii_info, MII_BMCR,
ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
ucc_geth_phy_write(mii_info, MII_BMCR,
ucc_geth_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
config_genmii_advert(mii_info);
/* Start/Restart aneg */
genmii_config_aneg(mii_info);
/* Start a timer for DM9161_DELAY seconds to wait
* for the PHY to be ready */
init_timer(&priv->timer);
priv->timer.function = &dm9161_timer;
priv->timer.data = (unsigned long)mii_info;
mod_timer(&priv->timer, jiffies + DM9161_DELAY * HZ);
return 0;
}
static void dm9161_close(struct ugeth_mii_info *mii_info)
{
struct dm9161_private *priv = mii_info->priv;
ugphy_vdbg("%s: IN", __FUNCTION__);
del_timer_sync(&priv->timer);
kfree(priv);
}
static int dm9161_ack_interrupt(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Clear the interrupts by reading the reg */
ucc_geth_phy_read(mii_info, MII_DM9161_INTR);
return 0;
}
static int dm9161_config_intr(struct ugeth_mii_info *mii_info)
{
ugphy_vdbg("%s: IN", __FUNCTION__);
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
/* Cicada 820x */
static struct phy_info phy_info_cis820x = {
.phy_id = 0x000fc440,
.name = "Cicada Cis8204",
.phy_id_mask = 0x000fffc0,
.features = MII_GBIT_FEATURES,
.init = &cis820x_init,
.config_aneg = &gbit_config_aneg,
.read_status = &cis820x_read_status,
.ack_interrupt = &cis820x_ack_interrupt,
.config_intr = &cis820x_config_intr,
};
static struct phy_info phy_info_dm9161 = {
.phy_id = 0x0181b880,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161E",
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.close = dm9161_close,
};
static struct phy_info phy_info_dm9161a = {
.phy_id = 0x0181b8a0,
.phy_id_mask = 0x0ffffff0,
.name = "Davicom DM9161A",
.features = MII_BASIC_FEATURES,
.init = dm9161_init,
.config_aneg = dm9161_config_aneg,
.read_status = dm9161_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
.close = dm9161_close,
};
static struct phy_info phy_info_marvell = {
.phy_id = 0x01410c00,
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
.init = &marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
};
static struct phy_info phy_info_genmii = {
.phy_id = 0x00000000,
.phy_id_mask = 0x00000000,
.name = "Generic MII",
.features = MII_BASIC_FEATURES,
.config_aneg = genmii_config_aneg,
.read_status = genmii_read_status,
};
static struct phy_info *phy_info[] = {
&phy_info_cis820x,
&phy_info_marvell,
&phy_info_dm9161,
&phy_info_dm9161a,
&phy_info_genmii,
NULL
};
/* Use the PHY ID registers to determine what type of PHY is attached
* to device dev. return a struct phy_info structure describing that PHY
*/
struct phy_info *get_phy_info(struct ugeth_mii_info *mii_info)
{
u16 phy_reg;
u32 phy_ID;
int i;
struct phy_info *theInfo = NULL;
struct net_device *dev = mii_info->dev;
ugphy_vdbg("%s: IN", __FUNCTION__);
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
/* matches the ID we read from the PHY. */
for (i = 0; phy_info[i]; i++)
if (phy_info[i]->phy_id == (phy_ID & phy_info[i]->phy_id_mask)){
theInfo = phy_info[i];
break;
}
/* This shouldn't happen, as we have generic PHY support */
if (theInfo == NULL) {
ugphy_info("%s: PHY id %x is not supported!", dev->name,
phy_ID);
return NULL;
} else {
ugphy_info("%s: PHY is %s (%x)", dev->name, theInfo->name,
phy_ID);
}
return theInfo;
}