1
linux/net/8021q/vlan.h
Eric Dumazet 05423b2413 vlan: allow null VLAN ID to be used
We currently use a 16 bit field (vlan_tci) to store VLAN ID/PRIO on a skb.

Null value is used as a special value, meaning vlan tagging not enabled.
This forbids use of null vlan ID.

As pointed by David, some drivers use the 3 high order bits (PRIO)

As VLAN ID is 12 bits, we can use the remaining bit (CFI) as a flag, and
allow null VLAN ID.

In case future code really wants to use VLAN_CFI_MASK, we'll have to use
a bit outside of vlan_tci.

#define VLAN_PRIO_MASK         0xe000 /* Priority Code Point */
#define VLAN_PRIO_SHIFT        13
#define VLAN_CFI_MASK          0x1000 /* Canonical Format Indicator */
#define VLAN_TAG_PRESENT       VLAN_CFI_MASK
#define VLAN_VID_MASK          0x0fff /* VLAN Identifier */

Reported-by: Gertjan Hofman <gertjan_hofman@yahoo.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-27 01:02:33 -07:00

137 lines
4.5 KiB
C

#ifndef __BEN_VLAN_802_1Q_INC__
#define __BEN_VLAN_802_1Q_INC__
#include <linux/if_vlan.h>
/**
* struct vlan_priority_tci_mapping - vlan egress priority mappings
* @priority: skb priority
* @vlan_qos: vlan priority: (skb->priority << 13) & 0xE000
* @next: pointer to next struct
*/
struct vlan_priority_tci_mapping {
u32 priority;
u16 vlan_qos;
struct vlan_priority_tci_mapping *next;
};
/**
* struct vlan_dev_info - VLAN private device data
* @nr_ingress_mappings: number of ingress priority mappings
* @ingress_priority_map: ingress priority mappings
* @nr_egress_mappings: number of egress priority mappings
* @egress_priority_map: hash of egress priority mappings
* @vlan_id: VLAN identifier
* @flags: device flags
* @real_dev: underlying netdevice
* @real_dev_addr: address of underlying netdevice
* @dent: proc dir entry
* @cnt_inc_headroom_on_tx: statistic - number of skb expansions on TX
* @cnt_encap_on_xmit: statistic - number of skb encapsulations on TX
*/
struct vlan_dev_info {
unsigned int nr_ingress_mappings;
u32 ingress_priority_map[8];
unsigned int nr_egress_mappings;
struct vlan_priority_tci_mapping *egress_priority_map[16];
u16 vlan_id;
u16 flags;
struct net_device *real_dev;
unsigned char real_dev_addr[ETH_ALEN];
struct proc_dir_entry *dent;
unsigned long cnt_inc_headroom_on_tx;
unsigned long cnt_encap_on_xmit;
};
static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
{
return netdev_priv(dev);
}
#define VLAN_GRP_HASH_SHIFT 5
#define VLAN_GRP_HASH_SIZE (1 << VLAN_GRP_HASH_SHIFT)
#define VLAN_GRP_HASH_MASK (VLAN_GRP_HASH_SIZE - 1)
/* Find a VLAN device by the MAC address of its Ethernet device, and
* it's VLAN ID. The default configuration is to have VLAN's scope
* to be box-wide, so the MAC will be ignored. The mac will only be
* looked at if we are configured to have a separate set of VLANs per
* each MAC addressable interface. Note that this latter option does
* NOT follow the spec for VLANs, but may be useful for doing very
* large quantities of VLAN MUX/DEMUX onto FrameRelay or ATM PVCs.
*
* Must be invoked with rcu_read_lock (ie preempt disabled)
* or with RTNL.
*/
struct net_device *__find_vlan_dev(struct net_device *real_dev, u16 vlan_id);
/* found in vlan_dev.c */
int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype, struct net_device *orig_dev);
void vlan_dev_set_ingress_priority(const struct net_device *dev,
u32 skb_prio, u16 vlan_prio);
int vlan_dev_set_egress_priority(const struct net_device *dev,
u32 skb_prio, u16 vlan_prio);
int vlan_dev_change_flags(const struct net_device *dev, u32 flag, u32 mask);
void vlan_dev_get_realdev_name(const struct net_device *dev, char *result);
int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id);
void vlan_setup(struct net_device *dev);
int register_vlan_dev(struct net_device *dev);
void unregister_vlan_dev(struct net_device *dev);
static inline u32 vlan_get_ingress_priority(struct net_device *dev,
u16 vlan_tci)
{
struct vlan_dev_info *vip = vlan_dev_info(dev);
return vip->ingress_priority_map[(vlan_tci >> VLAN_PRIO_SHIFT) & 0x7];
}
#ifdef CONFIG_VLAN_8021Q_GVRP
extern int vlan_gvrp_request_join(const struct net_device *dev);
extern void vlan_gvrp_request_leave(const struct net_device *dev);
extern int vlan_gvrp_init_applicant(struct net_device *dev);
extern void vlan_gvrp_uninit_applicant(struct net_device *dev);
extern int vlan_gvrp_init(void);
extern void vlan_gvrp_uninit(void);
#else
static inline int vlan_gvrp_request_join(const struct net_device *dev) { return 0; }
static inline void vlan_gvrp_request_leave(const struct net_device *dev) {}
static inline int vlan_gvrp_init_applicant(struct net_device *dev) { return 0; }
static inline void vlan_gvrp_uninit_applicant(struct net_device *dev) {}
static inline int vlan_gvrp_init(void) { return 0; }
static inline void vlan_gvrp_uninit(void) {}
#endif
extern const char vlan_fullname[];
extern const char vlan_version[];
extern int vlan_netlink_init(void);
extern void vlan_netlink_fini(void);
extern struct rtnl_link_ops vlan_link_ops;
static inline int is_vlan_dev(struct net_device *dev)
{
return dev->priv_flags & IFF_802_1Q_VLAN;
}
extern int vlan_net_id;
struct proc_dir_entry;
struct vlan_net {
/* /proc/net/vlan */
struct proc_dir_entry *proc_vlan_dir;
/* /proc/net/vlan/config */
struct proc_dir_entry *proc_vlan_conf;
/* Determines interface naming scheme. */
unsigned short name_type;
};
#endif /* !(__BEN_VLAN_802_1Q_INC__) */