1
linux/arch/powerpc/kernel/vmlinux.lds.S
Tejun Heo 023bf6f1b8 linker script: unify usage of discard definition
Discarded sections in different archs share some commonality but have
considerable differences.  This led to linker script for each arch
implementing its own /DISCARD/ definition, which makes maintaining
tedious and adding new entries error-prone.

This patch makes all linker scripts to move discard definitions to the
end of the linker script and use the common DISCARDS macro.  As ld
uses the first matching section definition, archs can include default
discarded sections by including them earlier in the linker script.

ia64 is notable because it first throws away some ia64 specific
subsections and then include the rest of the sections into the final
image, so those sections must be discarded before the inclusion.

defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64,
alpha, sparc, sparc64 and s390.  Michal Simek tested microblaze.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
2009-07-09 11:27:40 +09:00

299 lines
6.1 KiB
ArmAsm

#ifdef CONFIG_PPC64
#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
#define PROVIDE32(x) PROVIDE(x)
#endif
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
ENTRY(_stext)
PHDRS {
kernel PT_LOAD FLAGS(7); /* RWX */
notes PT_NOTE FLAGS(0);
dummy PT_NOTE FLAGS(0);
/* binutils < 2.18 has a bug that makes it misbehave when taking an
ELF file with all segments at load address 0 as input. This
happens when running "strip" on vmlinux, because of the AT() magic
in this linker script. People using GCC >= 4.2 won't run into
this problem, because the "build-id" support will put some data
into the "notes" segment (at a non-zero load address).
To work around this, we force some data into both the "dummy"
segment and the kernel segment, so the dummy segment will get a
non-zero load address. It's not enough to always create the
"notes" segment, since if nothing gets assigned to it, its load
address will be zero. */
}
#ifdef CONFIG_PPC64
OUTPUT_ARCH(powerpc:common64)
jiffies = jiffies_64;
#else
OUTPUT_ARCH(powerpc:common)
jiffies = jiffies_64 + 4;
#endif
SECTIONS
{
. = KERNELBASE;
/*
* Text, read only data and other permanent read-only sections
*/
/* Text and gots */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
HEAD_TEXT
_text = .;
/* careful! __ftr_alt_* sections need to be close to .text */
*(.text .fixup __ftr_alt_* .ref.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
IRQENTRY_TEXT
#ifdef CONFIG_PPC32
*(.got1)
__got2_start = .;
*(.got2)
__got2_end = .;
#endif /* CONFIG_PPC32 */
} :kernel
. = ALIGN(PAGE_SIZE);
_etext = .;
PROVIDE32 (etext = .);
/* Read-only data */
RODATA
/* Exception & bug tables */
__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
NOTES :kernel :notes
/* The dummy segment contents for the bug workaround mentioned above
near PHDRS. */
.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
LONG(0)
LONG(0)
LONG(0)
} :kernel :dummy
/*
* Init sections discarded at runtime
*/
. = ALIGN(PAGE_SIZE);
__init_begin = .;
.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
} :kernel
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
__vtop_table_begin = .;
*(.vtop_fixup);
__vtop_table_end = .;
__ptov_table_begin = .;
*(.ptov_fixup);
__ptov_table_end = .;
#ifdef CONFIG_PPC_ISERIES
__dt_strings_start = .;
*(.dt_strings);
__dt_strings_end = .;
#endif
}
. = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
}
SECURITY_INIT
. = ALIGN(8);
__ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
. = ALIGN(8);
__mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) {
__start___mmu_ftr_fixup = .;
*(__mmu_ftr_fixup)
__stop___mmu_ftr_fixup = .;
}
. = ALIGN(8);
__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
__start___lwsync_fixup = .;
*(__lwsync_fixup)
__stop___lwsync_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
}
#endif
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(PAGE_SIZE);
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
PERCPU(PAGE_SIZE)
. = ALIGN(8);
.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
__machine_desc_start = . ;
*(.machine.desc)
__machine_desc_end = . ;
}
#ifdef CONFIG_RELOCATABLE
. = ALIGN(8);
.dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
{
__dynamic_start = .;
*(.dynamic)
}
.hash : AT(ADDR(.hash) - LOAD_OFFSET) { *(.hash) }
.interp : AT(ADDR(.interp) - LOAD_OFFSET) { *(.interp) }
.rela.dyn : AT(ADDR(.rela.dyn) - LOAD_OFFSET)
{
__rela_dyn_start = .;
*(.rela*)
}
#endif
/* freed after init ends here */
. = ALIGN(PAGE_SIZE);
__init_end = .;
/*
* And now the various read/write data
*/
. = ALIGN(PAGE_SIZE);
_sdata = .;
#ifdef CONFIG_PPC32
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.sdata)
*(.got.plt) *(.got)
}
#else
.data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.data.rel*)
*(.toc1)
*(.branch_lt)
}
.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
*(.opd)
}
.got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
*(.got)
*(.toc)
}
#endif
. = ALIGN(PAGE_SIZE);
_edata = .;
PROVIDE32 (edata = .);
/* The initial task and kernel stack */
#ifdef CONFIG_PPC32
. = ALIGN(8192);
#else
. = ALIGN(16384);
#endif
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
. = ALIGN(PAGE_SIZE);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.page_aligned)
}
. = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
. = ALIGN(L1_CACHE_BYTES);
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
}
. = ALIGN(PAGE_SIZE);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(PAGE_SIZE);
__nosave_end = .;
}
/*
* And finally the bss
*/
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
__bss_stop = .;
}
. = ALIGN(PAGE_SIZE);
_end = . ;
PROVIDE32 (end = .);
/* Sections to be discarded. */
DISCARDS
}