..
include /mach
[ARM] locomo: remove unused IRQs and avoid unnecessary cascade
2010-03-02 07:40:49 +08:00
am200epd.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
am300epd.c
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
balloon3.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
clock.c
[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c
2009-06-04 17:45:43 +01:00
clock.h
[ARM] pxa: remove left-over struct clk *other field from struct clk
2009-09-10 18:49:23 +08:00
cm-x2xx-pci.c
[ARM] pxa: use chip->ack() instead of accessing GEDR directly
2010-03-02 07:40:45 +08:00
cm-x2xx-pci.h
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
2008-10-07 12:05:05 +01:00
cm-x2xx.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
cm-x255.c
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
2010-03-02 07:40:46 +08:00
cm-x270.c
[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
2010-03-02 07:40:48 +08:00
cm-x300.c
[ARM] pxa/cm-x300: add PWM backlight support
2009-12-16 16:49:22 +08:00
colibri-pxa3xx.c
pxa3xx_nand: move pxa3xx_nand.h common into plat directory
2009-12-01 09:02:43 +08:00
colibri-pxa270.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
colibri-pxa300.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
colibri-pxa320.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
corgi_lcd.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi_pm.c
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
2009-12-01 09:03:01 +08:00
corgi_ssp.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi.c
[ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
2010-01-13 21:01:08 +08:00
cpufreq-pxa2xx.c
[ARM] pxa/cpufreq: fix index assignments for end marker
2009-11-20 14:23:13 -06:00
cpufreq-pxa3xx.c
[ARM] pxa/cpufreq: fix index assignments for end marker
2009-11-20 14:23:13 -06:00
csb701.c
[ARM] pxa/csb701: do not register devices on non-csb726 boads
2009-04-04 10:26:35 +08:00
csb726.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
devices.c
[ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
2009-12-16 21:35:52 +08:00
devices.h
[ARM] pxa: add device definition for graphics controller
2009-09-10 18:49:27 +08:00
e330.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
e350.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
e400.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
e740.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
e750.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
e800.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
em-x270.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
eseries.c
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
2009-09-10 18:49:39 +08:00
eseries.h
[ARM] pxa: Add multi-io support for e-series
2008-12-15 03:29:34 +00:00
ezx.c
[ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone
2009-12-01 09:03:03 +08:00
generic.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
generic.h
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
gumstix.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
h5000.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
himalaya.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
hx4700.c
[ARM] pxa/hx4700: actually use platform_lcd driver
2009-12-01 09:03:15 +08:00
idp.c
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
2010-03-02 07:40:46 +08:00
imote2.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
irq.c
[ARM] pxa: fix irq suspend/resume for pxa25x
2010-01-13 21:01:09 +08:00
Kconfig
[ARM] locomo: remove unused IRQs and avoid unnecessary cascade
2010-03-02 07:40:49 +08:00
leds-idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-lubbock.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-mainstone.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds.c
leds.h
littleton.c
[ARM] pxa/littleton: add UART3 GPIO config
2009-12-29 14:11:28 +08:00
lpd270.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
lubbock.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
magician.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
mainstone.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
Makefile
[ARM] pxa/raumfeld: add platform support
2009-12-18 15:34:38 +08:00
Makefile.boot
mfp-pxa2xx.c
[ARM] pxa: enable GPIO receivers after configuring pins
2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mioa701_bootresume.S
[ARM] pxa/MioA701: fix memory corruption.
2008-11-22 20:57:21 +08:00
mioa701.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
mp900.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
palmld.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
palmt5.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
palmtc.c
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
2010-03-02 07:40:46 +08:00
palmte2.c
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
2010-03-02 07:40:46 +08:00
palmtreo.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
palmtx.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
palmz72.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
pcm027.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
pcm990-baseboard.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
pm.c
[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
2009-06-11 23:25:09 +08:00
poodle.c
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
2010-03-02 07:40:46 +08:00
pxa2xx.c
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
2009-09-10 18:49:39 +08:00
pxa3xx.c
[ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xx
2009-12-01 09:02:58 +08:00
pxa25x.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
pxa27x.c
[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
2010-03-02 07:40:47 +08:00
pxa300.c
[ARM] pxa: add clock definition for graphics controller
2009-09-10 18:49:26 +08:00
pxa320.c
[ARM] pxa: add clock definition for graphics controller
2009-09-10 18:49:26 +08:00
pxa930.c
[ARM] pxa: support mfp of pxa935
2009-09-10 18:49:24 +08:00
raumfeld.c
[ARM] pxa/raumfeld: add platform support
2009-12-18 15:34:38 +08:00
reset.c
[ARM] pxa: allow gpio_reset drive high during normal work
2009-05-18 21:52:09 +08:00
saar.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
sharpsl_pm.c
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
2009-12-01 09:03:01 +08:00
sharpsl.h
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
2009-12-01 09:03:01 +08:00
sleep.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
smemc.c
[ARM] pxa: avoid polluting the kernel's namespace
2008-11-28 16:04:54 +00:00
spitz_pm.c
[ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_*
2009-12-01 09:03:01 +08:00
spitz.c
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
2010-03-02 07:40:47 +08:00
ssp.c
[ARM] pxa: use platform_device_id table for SSP driver
2009-12-01 09:02:52 +08:00
standby.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
stargate2.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
tavorevb.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
time.c
arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode
2010-01-22 17:04:52 +01:00
tosa-bt.c
rfkill: rewrite
2009-06-03 14:06:13 -04:00
tosa.c
[ARM] pxa/tosa: make use of the matrix keypad driver
2010-03-02 07:40:48 +08:00
trizeps4.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
viper.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
xcep.c
[ARM] pxa: allow platforms to control which uarts are registered
2009-12-01 09:02:55 +08:00
zeus.c
[ARM] pxa: add the missing AC97 pin configurations
2010-03-02 07:40:48 +08:00
zylonite_pxa300.c
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
2009-12-29 14:11:34 +08:00
zylonite_pxa320.c
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
2009-12-29 14:11:34 +08:00
zylonite.c
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
2009-12-29 14:11:34 +08:00