130af75b5c
After commit 0edb555a65
("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all drivers below sound/soc to use .remove(), with the eventual
goal to drop struct platform_driver::remove_new(). As .remove() and
.remove_new() have the same prototypes, conversion is done by just
changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
305 lines
7.3 KiB
C
305 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (c) 2018-2020, Intel Corporation
|
|
//
|
|
// sof-wm8804.c - ASoC machine driver for Up and Up2 board
|
|
// based on WM8804/Hifiberry Digi+
|
|
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-acpi.h>
|
|
#include "../../codecs/wm8804.h"
|
|
|
|
struct sof_card_private {
|
|
struct gpio_desc *gpio_44;
|
|
struct gpio_desc *gpio_48;
|
|
int sample_rate;
|
|
};
|
|
|
|
#define SOF_WM8804_UP2_QUIRK BIT(0)
|
|
|
|
static unsigned long sof_wm8804_quirk;
|
|
|
|
static int sof_wm8804_quirk_cb(const struct dmi_system_id *id)
|
|
{
|
|
sof_wm8804_quirk = (unsigned long)id->driver_data;
|
|
return 1;
|
|
}
|
|
|
|
static const struct dmi_system_id sof_wm8804_quirk_table[] = {
|
|
{
|
|
.callback = sof_wm8804_quirk_cb,
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"),
|
|
},
|
|
.driver_data = (void *)SOF_WM8804_UP2_QUIRK,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static int sof_wm8804_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
|
|
struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
|
|
struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
|
|
struct snd_soc_component *codec = codec_dai->component;
|
|
const int sysclk = 27000000; /* This is fixed on this board */
|
|
int samplerate;
|
|
long mclk_freq;
|
|
int mclk_div;
|
|
int sampling_freq;
|
|
bool clk_44;
|
|
int ret;
|
|
|
|
samplerate = params_rate(params);
|
|
if (samplerate == ctx->sample_rate)
|
|
return 0;
|
|
|
|
ctx->sample_rate = 0;
|
|
|
|
if (samplerate <= 96000) {
|
|
mclk_freq = samplerate * 256;
|
|
mclk_div = WM8804_MCLKDIV_256FS;
|
|
} else {
|
|
mclk_freq = samplerate * 128;
|
|
mclk_div = WM8804_MCLKDIV_128FS;
|
|
}
|
|
|
|
switch (samplerate) {
|
|
case 32000:
|
|
sampling_freq = 0x03;
|
|
break;
|
|
case 44100:
|
|
sampling_freq = 0x00;
|
|
break;
|
|
case 48000:
|
|
sampling_freq = 0x02;
|
|
break;
|
|
case 88200:
|
|
sampling_freq = 0x08;
|
|
break;
|
|
case 96000:
|
|
sampling_freq = 0x0a;
|
|
break;
|
|
case 176400:
|
|
sampling_freq = 0x0c;
|
|
break;
|
|
case 192000:
|
|
sampling_freq = 0x0e;
|
|
break;
|
|
default:
|
|
dev_err(rtd->card->dev,
|
|
"unsupported samplerate %d\n", samplerate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (samplerate % 16000)
|
|
clk_44 = true; /* use 44.1 kHz root frequency */
|
|
else
|
|
clk_44 = false;
|
|
|
|
if (!(IS_ERR_OR_NULL(ctx->gpio_44) ||
|
|
IS_ERR_OR_NULL(ctx->gpio_48))) {
|
|
/*
|
|
* ensure both GPIOs are LOW first, then drive the
|
|
* relevant one to HIGH
|
|
*/
|
|
if (clk_44) {
|
|
gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
|
|
gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
|
|
} else {
|
|
gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
|
|
gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
|
|
}
|
|
}
|
|
|
|
snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
|
|
ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
|
|
if (ret < 0) {
|
|
dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
|
|
sysclk, SND_SOC_CLOCK_OUT);
|
|
if (ret < 0) {
|
|
dev_err(rtd->card->dev,
|
|
"Failed to set WM8804 SYSCLK: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* set sampling frequency status bits */
|
|
snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f,
|
|
sampling_freq);
|
|
|
|
ctx->sample_rate = samplerate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* machine stream operations */
|
|
static const struct snd_soc_ops sof_wm8804_ops = {
|
|
.hw_params = sof_wm8804_hw_params,
|
|
};
|
|
|
|
SND_SOC_DAILINK_DEF(ssp5_pin,
|
|
DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin")));
|
|
|
|
SND_SOC_DAILINK_DEF(ssp5_codec,
|
|
DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif")));
|
|
|
|
SND_SOC_DAILINK_DEF(platform,
|
|
DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0")));
|
|
|
|
static struct snd_soc_dai_link dailink[] = {
|
|
/* back ends */
|
|
{
|
|
.name = "SSP5-Codec",
|
|
.id = 0,
|
|
.no_pcm = 1,
|
|
.dpcm_playback = 1,
|
|
.dpcm_capture = 1,
|
|
.ops = &sof_wm8804_ops,
|
|
SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform),
|
|
},
|
|
};
|
|
|
|
/* SoC card */
|
|
static struct snd_soc_card sof_wm8804_card = {
|
|
.name = "wm8804", /* sof- prefix added automatically */
|
|
.owner = THIS_MODULE,
|
|
.dai_link = dailink,
|
|
.num_links = ARRAY_SIZE(dailink),
|
|
};
|
|
|
|
/* i2c-<HID>:00 with HID being 8 chars */
|
|
static char codec_name[SND_ACPI_I2C_ID_LEN];
|
|
|
|
/*
|
|
* to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to
|
|
* select the clock source. On the Up2 board, this means
|
|
* Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404.
|
|
*
|
|
* Using the ACPI device name is not very nice, but since we only use
|
|
* the value for the Up2 board there is no risk of conflict with other
|
|
* platforms.
|
|
*/
|
|
|
|
static struct gpiod_lookup_table up2_gpios_table = {
|
|
/* .dev_id is set during probe */
|
|
.table = {
|
|
GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static int sof_wm8804_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_card *card;
|
|
struct snd_soc_acpi_mach *mach;
|
|
struct sof_card_private *ctx;
|
|
struct acpi_device *adev;
|
|
int dai_index = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
mach = pdev->dev.platform_data;
|
|
card = &sof_wm8804_card;
|
|
card->dev = &pdev->dev;
|
|
|
|
dmi_check_system(sof_wm8804_quirk_table);
|
|
|
|
if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) {
|
|
up2_gpios_table.dev_id = dev_name(&pdev->dev);
|
|
gpiod_add_lookup_table(&up2_gpios_table);
|
|
|
|
/*
|
|
* The gpios are required for specific boards with
|
|
* local oscillators, and optional in other cases.
|
|
* Since we can't identify when they are needed, use
|
|
* the GPIO as non-optional
|
|
*/
|
|
|
|
ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->gpio_44)) {
|
|
ret = PTR_ERR(ctx->gpio_44);
|
|
dev_err(&pdev->dev,
|
|
"could not get BCM-GPIO5: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->gpio_48)) {
|
|
ret = PTR_ERR(ctx->gpio_48);
|
|
dev_err(&pdev->dev,
|
|
"could not get BCM-GPIO6: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* fix index of codec dai */
|
|
for (i = 0; i < ARRAY_SIZE(dailink); i++) {
|
|
if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) {
|
|
dai_index = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* fixup codec name based on HID */
|
|
adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
|
|
if (adev) {
|
|
snprintf(codec_name, sizeof(codec_name),
|
|
"%s%s", "i2c-", acpi_dev_name(adev));
|
|
dailink[dai_index].codecs->name = codec_name;
|
|
} else {
|
|
dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
|
|
return -ENOENT;
|
|
}
|
|
|
|
acpi_dev_put(adev);
|
|
|
|
snd_soc_card_set_drvdata(card, ctx);
|
|
|
|
return devm_snd_soc_register_card(&pdev->dev, card);
|
|
}
|
|
|
|
static void sof_wm8804_remove(struct platform_device *pdev)
|
|
{
|
|
if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK)
|
|
gpiod_remove_lookup_table(&up2_gpios_table);
|
|
}
|
|
|
|
static struct platform_driver sof_wm8804_driver = {
|
|
.driver = {
|
|
.name = "sof-wm8804",
|
|
.pm = &snd_soc_pm_ops,
|
|
},
|
|
.probe = sof_wm8804_probe,
|
|
.remove = sof_wm8804_remove,
|
|
};
|
|
module_platform_driver(sof_wm8804_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver");
|
|
MODULE_AUTHOR("Pierre-Louis Bossart");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:sof-wm8804");
|