1
linux/mm/zswap.c
Barry Song e7ac4daeed mm: count zeromap read and set for swapout and swapin
When the proportion of folios from the zeromap is small, missing their
accounting may not significantly impact profiling.  However, it's easy to
construct a scenario where this becomes an issue—for example, allocating
1 GB of memory, writing zeros from userspace, followed by MADV_PAGEOUT,
and then swapping it back in.  In this case, the swap-out and swap-in
counts seem to vanish into a black hole, potentially causing semantic
ambiguity.

On the other hand, Usama reported that zero-filled pages can exceed 10% in
workloads utilizing zswap, while Hailong noted that some app in Android
have more than 6% zero-filled pages.  Before commit 0ca0c24e32 ("mm:
store zero pages to be swapped out in a bitmap"), both zswap and zRAM
implemented similar optimizations, leading to these optimized-out pages
being counted in either zswap or zRAM counters (with pswpin/pswpout also
increasing for zRAM).  With zeromap functioning prior to both zswap and
zRAM, userspace will no longer detect these swap-out and swap-in actions.

We have three ways to address this:

1. Introduce a dedicated counter specifically for the zeromap.

2. Use pswpin/pswpout accounting, treating the zero map as a standard
   backend.  This approach aligns with zRAM's current handling of
   same-page fills at the device level.  However, it would mean losing the
   optimized-out page counters previously available in zRAM and would not
   align with systems using zswap.  Additionally, as noted by Nhat Pham,
   pswpin/pswpout counters apply only to I/O done directly to the backend
   device.

3. Count zeromap pages under zswap, aligning with system behavior when
   zswap is enabled.  However, this would not be consistent with zRAM, nor
   would it align with systems lacking both zswap and zRAM.

Given the complications with options 2 and 3, this patch selects
option 1.

We can find these counters from /proc/vmstat (counters for the whole
system) and memcg's memory.stat (counters for the interested memcg).

For example:

$ grep -E 'swpin_zero|swpout_zero' /proc/vmstat
swpin_zero 1648
swpout_zero 33536

$ grep -E 'swpin_zero|swpout_zero' /sys/fs/cgroup/system.slice/memory.stat
swpin_zero 3905
swpout_zero 3985

This patch does not address any specific zeromap bug, but the missing
swpout and swpin counts for zero-filled pages can be highly confusing and
may mislead user-space agents that rely on changes in these counters as
indicators.  Therefore, we add a Fixes tag to encourage the inclusion of
this counter in any kernel versions with zeromap.

Many thanks to Kanchana for the contribution of changing
count_objcg_event() to count_objcg_events() to support large folios[1],
which has now been incorporated into this patch.

[1] https://lkml.kernel.org/r/20241001053222.6944-5-kanchana.p.sridhar@intel.com

Link: https://lkml.kernel.org/r/20241107011246.59137-1-21cnbao@gmail.com
Fixes: 0ca0c24e32 ("mm: store zero pages to be swapped out in a bitmap")
Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-11-11 00:00:37 -08:00

1767 lines
49 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* zswap.c - zswap driver file
*
* zswap is a cache that takes pages that are in the process
* of being swapped out and attempts to compress and store them in a
* RAM-based memory pool. This can result in a significant I/O reduction on
* the swap device and, in the case where decompressing from RAM is faster
* than reading from the swap device, can also improve workload performance.
*
* Copyright (C) 2012 Seth Jennings <sjenning@linux.vnet.ibm.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/cpu.h>
#include <linux/highmem.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/atomic.h>
#include <linux/swap.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
#include <linux/mempolicy.h>
#include <linux/mempool.h>
#include <linux/zpool.h>
#include <crypto/acompress.h>
#include <linux/zswap.h>
#include <linux/mm_types.h>
#include <linux/page-flags.h>
#include <linux/swapops.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/workqueue.h>
#include <linux/list_lru.h>
#include "swap.h"
#include "internal.h"
/*********************************
* statistics
**********************************/
/* The number of compressed pages currently stored in zswap */
atomic_t zswap_stored_pages = ATOMIC_INIT(0);
/*
* The statistics below are not protected from concurrent access for
* performance reasons so they may not be a 100% accurate. However,
* they do provide useful information on roughly how many times a
* certain event is occurring.
*/
/* Pool limit was hit (see zswap_max_pool_percent) */
static u64 zswap_pool_limit_hit;
/* Pages written back when pool limit was reached */
static u64 zswap_written_back_pages;
/* Store failed due to a reclaim failure after pool limit was reached */
static u64 zswap_reject_reclaim_fail;
/* Store failed due to compression algorithm failure */
static u64 zswap_reject_compress_fail;
/* Compressed page was too big for the allocator to (optimally) store */
static u64 zswap_reject_compress_poor;
/* Store failed because underlying allocator could not get memory */
static u64 zswap_reject_alloc_fail;
/* Store failed because the entry metadata could not be allocated (rare) */
static u64 zswap_reject_kmemcache_fail;
/* Shrinker work queue */
static struct workqueue_struct *shrink_wq;
/* Pool limit was hit, we need to calm down */
static bool zswap_pool_reached_full;
/*********************************
* tunables
**********************************/
#define ZSWAP_PARAM_UNSET ""
static int zswap_setup(void);
/* Enable/disable zswap */
static DEFINE_STATIC_KEY_MAYBE(CONFIG_ZSWAP_DEFAULT_ON, zswap_ever_enabled);
static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
static int zswap_enabled_param_set(const char *,
const struct kernel_param *);
static const struct kernel_param_ops zswap_enabled_param_ops = {
.set = zswap_enabled_param_set,
.get = param_get_bool,
};
module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644);
/* Crypto compressor to use */
static char *zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
static int zswap_compressor_param_set(const char *,
const struct kernel_param *);
static const struct kernel_param_ops zswap_compressor_param_ops = {
.set = zswap_compressor_param_set,
.get = param_get_charp,
.free = param_free_charp,
};
module_param_cb(compressor, &zswap_compressor_param_ops,
&zswap_compressor, 0644);
/* Compressed storage zpool to use */
static char *zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
static int zswap_zpool_param_set(const char *, const struct kernel_param *);
static const struct kernel_param_ops zswap_zpool_param_ops = {
.set = zswap_zpool_param_set,
.get = param_get_charp,
.free = param_free_charp,
};
module_param_cb(zpool, &zswap_zpool_param_ops, &zswap_zpool_type, 0644);
/* The maximum percentage of memory that the compressed pool can occupy */
static unsigned int zswap_max_pool_percent = 20;
module_param_named(max_pool_percent, zswap_max_pool_percent, uint, 0644);
/* The threshold for accepting new pages after the max_pool_percent was hit */
static unsigned int zswap_accept_thr_percent = 90; /* of max pool size */
module_param_named(accept_threshold_percent, zswap_accept_thr_percent,
uint, 0644);
/* Enable/disable memory pressure-based shrinker. */
static bool zswap_shrinker_enabled = IS_ENABLED(
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON);
module_param_named(shrinker_enabled, zswap_shrinker_enabled, bool, 0644);
bool zswap_is_enabled(void)
{
return zswap_enabled;
}
bool zswap_never_enabled(void)
{
return !static_branch_maybe(CONFIG_ZSWAP_DEFAULT_ON, &zswap_ever_enabled);
}
/*********************************
* data structures
**********************************/
struct crypto_acomp_ctx {
struct crypto_acomp *acomp;
struct acomp_req *req;
struct crypto_wait wait;
u8 *buffer;
struct mutex mutex;
bool is_sleepable;
};
/*
* The lock ordering is zswap_tree.lock -> zswap_pool.lru_lock.
* The only case where lru_lock is not acquired while holding tree.lock is
* when a zswap_entry is taken off the lru for writeback, in that case it
* needs to be verified that it's still valid in the tree.
*/
struct zswap_pool {
struct zpool *zpool;
struct crypto_acomp_ctx __percpu *acomp_ctx;
struct percpu_ref ref;
struct list_head list;
struct work_struct release_work;
struct hlist_node node;
char tfm_name[CRYPTO_MAX_ALG_NAME];
};
/* Global LRU lists shared by all zswap pools. */
static struct list_lru zswap_list_lru;
/* The lock protects zswap_next_shrink updates. */
static DEFINE_SPINLOCK(zswap_shrink_lock);
static struct mem_cgroup *zswap_next_shrink;
static struct work_struct zswap_shrink_work;
static struct shrinker *zswap_shrinker;
/*
* struct zswap_entry
*
* This structure contains the metadata for tracking a single compressed
* page within zswap.
*
* swpentry - associated swap entry, the offset indexes into the red-black tree
* length - the length in bytes of the compressed page data. Needed during
* decompression.
* referenced - true if the entry recently entered the zswap pool. Unset by the
* writeback logic. The entry is only reclaimed by the writeback
* logic if referenced is unset. See comments in the shrinker
* section for context.
* pool - the zswap_pool the entry's data is in
* handle - zpool allocation handle that stores the compressed page data
* objcg - the obj_cgroup that the compressed memory is charged to
* lru - handle to the pool's lru used to evict pages.
*/
struct zswap_entry {
swp_entry_t swpentry;
unsigned int length;
bool referenced;
struct zswap_pool *pool;
unsigned long handle;
struct obj_cgroup *objcg;
struct list_head lru;
};
static struct xarray *zswap_trees[MAX_SWAPFILES];
static unsigned int nr_zswap_trees[MAX_SWAPFILES];
/* RCU-protected iteration */
static LIST_HEAD(zswap_pools);
/* protects zswap_pools list modification */
static DEFINE_SPINLOCK(zswap_pools_lock);
/* pool counter to provide unique names to zpool */
static atomic_t zswap_pools_count = ATOMIC_INIT(0);
enum zswap_init_type {
ZSWAP_UNINIT,
ZSWAP_INIT_SUCCEED,
ZSWAP_INIT_FAILED
};
static enum zswap_init_type zswap_init_state;
/* used to ensure the integrity of initialization */
static DEFINE_MUTEX(zswap_init_lock);
/* init completed, but couldn't create the initial pool */
static bool zswap_has_pool;
/*********************************
* helpers and fwd declarations
**********************************/
static inline struct xarray *swap_zswap_tree(swp_entry_t swp)
{
return &zswap_trees[swp_type(swp)][swp_offset(swp)
>> SWAP_ADDRESS_SPACE_SHIFT];
}
#define zswap_pool_debug(msg, p) \
pr_debug("%s pool %s/%s\n", msg, (p)->tfm_name, \
zpool_get_type((p)->zpool))
/*********************************
* pool functions
**********************************/
static void __zswap_pool_empty(struct percpu_ref *ref);
static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
{
struct zswap_pool *pool;
char name[38]; /* 'zswap' + 32 char (max) num + \0 */
gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
int ret;
if (!zswap_has_pool) {
/* if either are unset, pool initialization failed, and we
* need both params to be set correctly before trying to
* create a pool.
*/
if (!strcmp(type, ZSWAP_PARAM_UNSET))
return NULL;
if (!strcmp(compressor, ZSWAP_PARAM_UNSET))
return NULL;
}
pool = kzalloc(sizeof(*pool), GFP_KERNEL);
if (!pool)
return NULL;
/* unique name for each pool specifically required by zsmalloc */
snprintf(name, 38, "zswap%x", atomic_inc_return(&zswap_pools_count));
pool->zpool = zpool_create_pool(type, name, gfp);
if (!pool->zpool) {
pr_err("%s zpool not available\n", type);
goto error;
}
pr_debug("using %s zpool\n", zpool_get_type(pool->zpool));
strscpy(pool->tfm_name, compressor, sizeof(pool->tfm_name));
pool->acomp_ctx = alloc_percpu(*pool->acomp_ctx);
if (!pool->acomp_ctx) {
pr_err("percpu alloc failed\n");
goto error;
}
ret = cpuhp_state_add_instance(CPUHP_MM_ZSWP_POOL_PREPARE,
&pool->node);
if (ret)
goto error;
/* being the current pool takes 1 ref; this func expects the
* caller to always add the new pool as the current pool
*/
ret = percpu_ref_init(&pool->ref, __zswap_pool_empty,
PERCPU_REF_ALLOW_REINIT, GFP_KERNEL);
if (ret)
goto ref_fail;
INIT_LIST_HEAD(&pool->list);
zswap_pool_debug("created", pool);
return pool;
ref_fail:
cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node);
error:
if (pool->acomp_ctx)
free_percpu(pool->acomp_ctx);
if (pool->zpool)
zpool_destroy_pool(pool->zpool);
kfree(pool);
return NULL;
}
static struct zswap_pool *__zswap_pool_create_fallback(void)
{
bool has_comp, has_zpool;
has_comp = crypto_has_acomp(zswap_compressor, 0, 0);
if (!has_comp && strcmp(zswap_compressor,
CONFIG_ZSWAP_COMPRESSOR_DEFAULT)) {
pr_err("compressor %s not available, using default %s\n",
zswap_compressor, CONFIG_ZSWAP_COMPRESSOR_DEFAULT);
param_free_charp(&zswap_compressor);
zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT;
has_comp = crypto_has_acomp(zswap_compressor, 0, 0);
}
if (!has_comp) {
pr_err("default compressor %s not available\n",
zswap_compressor);
param_free_charp(&zswap_compressor);
zswap_compressor = ZSWAP_PARAM_UNSET;
}
has_zpool = zpool_has_pool(zswap_zpool_type);
if (!has_zpool && strcmp(zswap_zpool_type,
CONFIG_ZSWAP_ZPOOL_DEFAULT)) {
pr_err("zpool %s not available, using default %s\n",
zswap_zpool_type, CONFIG_ZSWAP_ZPOOL_DEFAULT);
param_free_charp(&zswap_zpool_type);
zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT;
has_zpool = zpool_has_pool(zswap_zpool_type);
}
if (!has_zpool) {
pr_err("default zpool %s not available\n",
zswap_zpool_type);
param_free_charp(&zswap_zpool_type);
zswap_zpool_type = ZSWAP_PARAM_UNSET;
}
if (!has_comp || !has_zpool)
return NULL;
return zswap_pool_create(zswap_zpool_type, zswap_compressor);
}
static void zswap_pool_destroy(struct zswap_pool *pool)
{
zswap_pool_debug("destroying", pool);
cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node);
free_percpu(pool->acomp_ctx);
zpool_destroy_pool(pool->zpool);
kfree(pool);
}
static void __zswap_pool_release(struct work_struct *work)
{
struct zswap_pool *pool = container_of(work, typeof(*pool),
release_work);
synchronize_rcu();
/* nobody should have been able to get a ref... */
WARN_ON(!percpu_ref_is_zero(&pool->ref));
percpu_ref_exit(&pool->ref);
/* pool is now off zswap_pools list and has no references. */
zswap_pool_destroy(pool);
}
static struct zswap_pool *zswap_pool_current(void);
static void __zswap_pool_empty(struct percpu_ref *ref)
{
struct zswap_pool *pool;
pool = container_of(ref, typeof(*pool), ref);
spin_lock_bh(&zswap_pools_lock);
WARN_ON(pool == zswap_pool_current());
list_del_rcu(&pool->list);
INIT_WORK(&pool->release_work, __zswap_pool_release);
schedule_work(&pool->release_work);
spin_unlock_bh(&zswap_pools_lock);
}
static int __must_check zswap_pool_get(struct zswap_pool *pool)
{
if (!pool)
return 0;
return percpu_ref_tryget(&pool->ref);
}
static void zswap_pool_put(struct zswap_pool *pool)
{
percpu_ref_put(&pool->ref);
}
static struct zswap_pool *__zswap_pool_current(void)
{
struct zswap_pool *pool;
pool = list_first_or_null_rcu(&zswap_pools, typeof(*pool), list);
WARN_ONCE(!pool && zswap_has_pool,
"%s: no page storage pool!\n", __func__);
return pool;
}
static struct zswap_pool *zswap_pool_current(void)
{
assert_spin_locked(&zswap_pools_lock);
return __zswap_pool_current();
}
static struct zswap_pool *zswap_pool_current_get(void)
{
struct zswap_pool *pool;
rcu_read_lock();
pool = __zswap_pool_current();
if (!zswap_pool_get(pool))
pool = NULL;
rcu_read_unlock();
return pool;
}
/* type and compressor must be null-terminated */
static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor)
{
struct zswap_pool *pool;
assert_spin_locked(&zswap_pools_lock);
list_for_each_entry_rcu(pool, &zswap_pools, list) {
if (strcmp(pool->tfm_name, compressor))
continue;
if (strcmp(zpool_get_type(pool->zpool), type))
continue;
/* if we can't get it, it's about to be destroyed */
if (!zswap_pool_get(pool))
continue;
return pool;
}
return NULL;
}
static unsigned long zswap_max_pages(void)
{
return totalram_pages() * zswap_max_pool_percent / 100;
}
static unsigned long zswap_accept_thr_pages(void)
{
return zswap_max_pages() * zswap_accept_thr_percent / 100;
}
unsigned long zswap_total_pages(void)
{
struct zswap_pool *pool;
unsigned long total = 0;
rcu_read_lock();
list_for_each_entry_rcu(pool, &zswap_pools, list)
total += zpool_get_total_pages(pool->zpool);
rcu_read_unlock();
return total;
}
static bool zswap_check_limits(void)
{
unsigned long cur_pages = zswap_total_pages();
unsigned long max_pages = zswap_max_pages();
if (cur_pages >= max_pages) {
zswap_pool_limit_hit++;
zswap_pool_reached_full = true;
} else if (zswap_pool_reached_full &&
cur_pages <= zswap_accept_thr_pages()) {
zswap_pool_reached_full = false;
}
return zswap_pool_reached_full;
}
/*********************************
* param callbacks
**********************************/
static bool zswap_pool_changed(const char *s, const struct kernel_param *kp)
{
/* no change required */
if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
return false;
return true;
}
/* val must be a null-terminated string */
static int __zswap_param_set(const char *val, const struct kernel_param *kp,
char *type, char *compressor)
{
struct zswap_pool *pool, *put_pool = NULL;
char *s = strstrip((char *)val);
int ret = 0;
bool new_pool = false;
mutex_lock(&zswap_init_lock);
switch (zswap_init_state) {
case ZSWAP_UNINIT:
/* if this is load-time (pre-init) param setting,
* don't create a pool; that's done during init.
*/
ret = param_set_charp(s, kp);
break;
case ZSWAP_INIT_SUCCEED:
new_pool = zswap_pool_changed(s, kp);
break;
case ZSWAP_INIT_FAILED:
pr_err("can't set param, initialization failed\n");
ret = -ENODEV;
}
mutex_unlock(&zswap_init_lock);
/* no need to create a new pool, return directly */
if (!new_pool)
return ret;
if (!type) {
if (!zpool_has_pool(s)) {
pr_err("zpool %s not available\n", s);
return -ENOENT;
}
type = s;
} else if (!compressor) {
if (!crypto_has_acomp(s, 0, 0)) {
pr_err("compressor %s not available\n", s);
return -ENOENT;
}
compressor = s;
} else {
WARN_ON(1);
return -EINVAL;
}
spin_lock_bh(&zswap_pools_lock);
pool = zswap_pool_find_get(type, compressor);
if (pool) {
zswap_pool_debug("using existing", pool);
WARN_ON(pool == zswap_pool_current());
list_del_rcu(&pool->list);
}
spin_unlock_bh(&zswap_pools_lock);
if (!pool)
pool = zswap_pool_create(type, compressor);
else {
/*
* Restore the initial ref dropped by percpu_ref_kill()
* when the pool was decommissioned and switch it again
* to percpu mode.
*/
percpu_ref_resurrect(&pool->ref);
/* Drop the ref from zswap_pool_find_get(). */
zswap_pool_put(pool);
}
if (pool)
ret = param_set_charp(s, kp);
else
ret = -EINVAL;
spin_lock_bh(&zswap_pools_lock);
if (!ret) {
put_pool = zswap_pool_current();
list_add_rcu(&pool->list, &zswap_pools);
zswap_has_pool = true;
} else if (pool) {
/* add the possibly pre-existing pool to the end of the pools
* list; if it's new (and empty) then it'll be removed and
* destroyed by the put after we drop the lock
*/
list_add_tail_rcu(&pool->list, &zswap_pools);
put_pool = pool;
}
spin_unlock_bh(&zswap_pools_lock);
if (!zswap_has_pool && !pool) {
/* if initial pool creation failed, and this pool creation also
* failed, maybe both compressor and zpool params were bad.
* Allow changing this param, so pool creation will succeed
* when the other param is changed. We already verified this
* param is ok in the zpool_has_pool() or crypto_has_acomp()
* checks above.
*/
ret = param_set_charp(s, kp);
}
/* drop the ref from either the old current pool,
* or the new pool we failed to add
*/
if (put_pool)
percpu_ref_kill(&put_pool->ref);
return ret;
}
static int zswap_compressor_param_set(const char *val,
const struct kernel_param *kp)
{
return __zswap_param_set(val, kp, zswap_zpool_type, NULL);
}
static int zswap_zpool_param_set(const char *val,
const struct kernel_param *kp)
{
return __zswap_param_set(val, kp, NULL, zswap_compressor);
}
static int zswap_enabled_param_set(const char *val,
const struct kernel_param *kp)
{
int ret = -ENODEV;
/* if this is load-time (pre-init) param setting, only set param. */
if (system_state != SYSTEM_RUNNING)
return param_set_bool(val, kp);
mutex_lock(&zswap_init_lock);
switch (zswap_init_state) {
case ZSWAP_UNINIT:
if (zswap_setup())
break;
fallthrough;
case ZSWAP_INIT_SUCCEED:
if (!zswap_has_pool)
pr_err("can't enable, no pool configured\n");
else
ret = param_set_bool(val, kp);
break;
case ZSWAP_INIT_FAILED:
pr_err("can't enable, initialization failed\n");
}
mutex_unlock(&zswap_init_lock);
return ret;
}
/*********************************
* lru functions
**********************************/
/* should be called under RCU */
#ifdef CONFIG_MEMCG
static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry)
{
return entry->objcg ? obj_cgroup_memcg(entry->objcg) : NULL;
}
#else
static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry)
{
return NULL;
}
#endif
static inline int entry_to_nid(struct zswap_entry *entry)
{
return page_to_nid(virt_to_page(entry));
}
static void zswap_lru_add(struct list_lru *list_lru, struct zswap_entry *entry)
{
int nid = entry_to_nid(entry);
struct mem_cgroup *memcg;
/*
* Note that it is safe to use rcu_read_lock() here, even in the face of
* concurrent memcg offlining. Thanks to the memcg->kmemcg_id indirection
* used in list_lru lookup, only two scenarios are possible:
*
* 1. list_lru_add() is called before memcg->kmemcg_id is updated. The
* new entry will be reparented to memcg's parent's list_lru.
* 2. list_lru_add() is called after memcg->kmemcg_id is updated. The
* new entry will be added directly to memcg's parent's list_lru.
*
* Similar reasoning holds for list_lru_del().
*/
rcu_read_lock();
memcg = mem_cgroup_from_entry(entry);
/* will always succeed */
list_lru_add(list_lru, &entry->lru, nid, memcg);
rcu_read_unlock();
}
static void zswap_lru_del(struct list_lru *list_lru, struct zswap_entry *entry)
{
int nid = entry_to_nid(entry);
struct mem_cgroup *memcg;
rcu_read_lock();
memcg = mem_cgroup_from_entry(entry);
/* will always succeed */
list_lru_del(list_lru, &entry->lru, nid, memcg);
rcu_read_unlock();
}
void zswap_lruvec_state_init(struct lruvec *lruvec)
{
atomic_long_set(&lruvec->zswap_lruvec_state.nr_disk_swapins, 0);
}
void zswap_folio_swapin(struct folio *folio)
{
struct lruvec *lruvec;
if (folio) {
lruvec = folio_lruvec(folio);
atomic_long_inc(&lruvec->zswap_lruvec_state.nr_disk_swapins);
}
}
/*
* This function should be called when a memcg is being offlined.
*
* Since the global shrinker shrink_worker() may hold a reference
* of the memcg, we must check and release the reference in
* zswap_next_shrink.
*
* shrink_worker() must handle the case where this function releases
* the reference of memcg being shrunk.
*/
void zswap_memcg_offline_cleanup(struct mem_cgroup *memcg)
{
/* lock out zswap shrinker walking memcg tree */
spin_lock(&zswap_shrink_lock);
if (zswap_next_shrink == memcg) {
do {
zswap_next_shrink = mem_cgroup_iter(NULL, zswap_next_shrink, NULL);
} while (zswap_next_shrink && !mem_cgroup_online(zswap_next_shrink));
}
spin_unlock(&zswap_shrink_lock);
}
/*********************************
* zswap entry functions
**********************************/
static struct kmem_cache *zswap_entry_cache;
static struct zswap_entry *zswap_entry_cache_alloc(gfp_t gfp, int nid)
{
struct zswap_entry *entry;
entry = kmem_cache_alloc_node(zswap_entry_cache, gfp, nid);
if (!entry)
return NULL;
return entry;
}
static void zswap_entry_cache_free(struct zswap_entry *entry)
{
kmem_cache_free(zswap_entry_cache, entry);
}
/*
* Carries out the common pattern of freeing and entry's zpool allocation,
* freeing the entry itself, and decrementing the number of stored pages.
*/
static void zswap_entry_free(struct zswap_entry *entry)
{
zswap_lru_del(&zswap_list_lru, entry);
zpool_free(entry->pool->zpool, entry->handle);
zswap_pool_put(entry->pool);
if (entry->objcg) {
obj_cgroup_uncharge_zswap(entry->objcg, entry->length);
obj_cgroup_put(entry->objcg);
}
zswap_entry_cache_free(entry);
atomic_dec(&zswap_stored_pages);
}
/*********************************
* compressed storage functions
**********************************/
static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node)
{
struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node);
struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu);
struct crypto_acomp *acomp;
struct acomp_req *req;
int ret;
mutex_init(&acomp_ctx->mutex);
acomp_ctx->buffer = kmalloc_node(PAGE_SIZE * 2, GFP_KERNEL, cpu_to_node(cpu));
if (!acomp_ctx->buffer)
return -ENOMEM;
acomp = crypto_alloc_acomp_node(pool->tfm_name, 0, 0, cpu_to_node(cpu));
if (IS_ERR(acomp)) {
pr_err("could not alloc crypto acomp %s : %ld\n",
pool->tfm_name, PTR_ERR(acomp));
ret = PTR_ERR(acomp);
goto acomp_fail;
}
acomp_ctx->acomp = acomp;
acomp_ctx->is_sleepable = acomp_is_async(acomp);
req = acomp_request_alloc(acomp_ctx->acomp);
if (!req) {
pr_err("could not alloc crypto acomp_request %s\n",
pool->tfm_name);
ret = -ENOMEM;
goto req_fail;
}
acomp_ctx->req = req;
crypto_init_wait(&acomp_ctx->wait);
/*
* if the backend of acomp is async zip, crypto_req_done() will wakeup
* crypto_wait_req(); if the backend of acomp is scomp, the callback
* won't be called, crypto_wait_req() will return without blocking.
*/
acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &acomp_ctx->wait);
return 0;
req_fail:
crypto_free_acomp(acomp_ctx->acomp);
acomp_fail:
kfree(acomp_ctx->buffer);
return ret;
}
static int zswap_cpu_comp_dead(unsigned int cpu, struct hlist_node *node)
{
struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node);
struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu);
if (!IS_ERR_OR_NULL(acomp_ctx)) {
if (!IS_ERR_OR_NULL(acomp_ctx->req))
acomp_request_free(acomp_ctx->req);
if (!IS_ERR_OR_NULL(acomp_ctx->acomp))
crypto_free_acomp(acomp_ctx->acomp);
kfree(acomp_ctx->buffer);
}
return 0;
}
static bool zswap_compress(struct folio *folio, struct zswap_entry *entry)
{
struct crypto_acomp_ctx *acomp_ctx;
struct scatterlist input, output;
int comp_ret = 0, alloc_ret = 0;
unsigned int dlen = PAGE_SIZE;
unsigned long handle;
struct zpool *zpool;
char *buf;
gfp_t gfp;
u8 *dst;
acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
mutex_lock(&acomp_ctx->mutex);
dst = acomp_ctx->buffer;
sg_init_table(&input, 1);
sg_set_folio(&input, folio, PAGE_SIZE, 0);
/*
* We need PAGE_SIZE * 2 here since there maybe over-compression case,
* and hardware-accelerators may won't check the dst buffer size, so
* giving the dst buffer with enough length to avoid buffer overflow.
*/
sg_init_one(&output, dst, PAGE_SIZE * 2);
acomp_request_set_params(acomp_ctx->req, &input, &output, PAGE_SIZE, dlen);
/*
* it maybe looks a little bit silly that we send an asynchronous request,
* then wait for its completion synchronously. This makes the process look
* synchronous in fact.
* Theoretically, acomp supports users send multiple acomp requests in one
* acomp instance, then get those requests done simultaneously. but in this
* case, zswap actually does store and load page by page, there is no
* existing method to send the second page before the first page is done
* in one thread doing zwap.
* but in different threads running on different cpu, we have different
* acomp instance, so multiple threads can do (de)compression in parallel.
*/
comp_ret = crypto_wait_req(crypto_acomp_compress(acomp_ctx->req), &acomp_ctx->wait);
dlen = acomp_ctx->req->dlen;
if (comp_ret)
goto unlock;
zpool = entry->pool->zpool;
gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
if (zpool_malloc_support_movable(zpool))
gfp |= __GFP_HIGHMEM | __GFP_MOVABLE;
alloc_ret = zpool_malloc(zpool, dlen, gfp, &handle);
if (alloc_ret)
goto unlock;
buf = zpool_map_handle(zpool, handle, ZPOOL_MM_WO);
memcpy(buf, dst, dlen);
zpool_unmap_handle(zpool, handle);
entry->handle = handle;
entry->length = dlen;
unlock:
if (comp_ret == -ENOSPC || alloc_ret == -ENOSPC)
zswap_reject_compress_poor++;
else if (comp_ret)
zswap_reject_compress_fail++;
else if (alloc_ret)
zswap_reject_alloc_fail++;
mutex_unlock(&acomp_ctx->mutex);
return comp_ret == 0 && alloc_ret == 0;
}
static void zswap_decompress(struct zswap_entry *entry, struct folio *folio)
{
struct zpool *zpool = entry->pool->zpool;
struct scatterlist input, output;
struct crypto_acomp_ctx *acomp_ctx;
u8 *src;
acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
mutex_lock(&acomp_ctx->mutex);
src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
/*
* If zpool_map_handle is atomic, we cannot reliably utilize its mapped buffer
* to do crypto_acomp_decompress() which might sleep. In such cases, we must
* resort to copying the buffer to a temporary one.
* Meanwhile, zpool_map_handle() might return a non-linearly mapped buffer,
* such as a kmap address of high memory or even ever a vmap address.
* However, sg_init_one is only equipped to handle linearly mapped low memory.
* In such cases, we also must copy the buffer to a temporary and lowmem one.
*/
if ((acomp_ctx->is_sleepable && !zpool_can_sleep_mapped(zpool)) ||
!virt_addr_valid(src)) {
memcpy(acomp_ctx->buffer, src, entry->length);
src = acomp_ctx->buffer;
zpool_unmap_handle(zpool, entry->handle);
}
sg_init_one(&input, src, entry->length);
sg_init_table(&output, 1);
sg_set_folio(&output, folio, PAGE_SIZE, 0);
acomp_request_set_params(acomp_ctx->req, &input, &output, entry->length, PAGE_SIZE);
BUG_ON(crypto_wait_req(crypto_acomp_decompress(acomp_ctx->req), &acomp_ctx->wait));
BUG_ON(acomp_ctx->req->dlen != PAGE_SIZE);
mutex_unlock(&acomp_ctx->mutex);
if (src != acomp_ctx->buffer)
zpool_unmap_handle(zpool, entry->handle);
}
/*********************************
* writeback code
**********************************/
/*
* Attempts to free an entry by adding a folio to the swap cache,
* decompressing the entry data into the folio, and issuing a
* bio write to write the folio back to the swap device.
*
* This can be thought of as a "resumed writeback" of the folio
* to the swap device. We are basically resuming the same swap
* writeback path that was intercepted with the zswap_store()
* in the first place. After the folio has been decompressed into
* the swap cache, the compressed version stored by zswap can be
* freed.
*/
static int zswap_writeback_entry(struct zswap_entry *entry,
swp_entry_t swpentry)
{
struct xarray *tree;
pgoff_t offset = swp_offset(swpentry);
struct folio *folio;
struct mempolicy *mpol;
bool folio_was_allocated;
struct writeback_control wbc = {
.sync_mode = WB_SYNC_NONE,
};
/* try to allocate swap cache folio */
mpol = get_task_policy(current);
folio = __read_swap_cache_async(swpentry, GFP_KERNEL, mpol,
NO_INTERLEAVE_INDEX, &folio_was_allocated, true);
if (!folio)
return -ENOMEM;
/*
* Found an existing folio, we raced with swapin or concurrent
* shrinker. We generally writeback cold folios from zswap, and
* swapin means the folio just became hot, so skip this folio.
* For unlikely concurrent shrinker case, it will be unlinked
* and freed when invalidated by the concurrent shrinker anyway.
*/
if (!folio_was_allocated) {
folio_put(folio);
return -EEXIST;
}
/*
* folio is locked, and the swapcache is now secured against
* concurrent swapping to and from the slot, and concurrent
* swapoff so we can safely dereference the zswap tree here.
* Verify that the swap entry hasn't been invalidated and recycled
* behind our backs, to avoid overwriting a new swap folio with
* old compressed data. Only when this is successful can the entry
* be dereferenced.
*/
tree = swap_zswap_tree(swpentry);
if (entry != xa_cmpxchg(tree, offset, entry, NULL, GFP_KERNEL)) {
delete_from_swap_cache(folio);
folio_unlock(folio);
folio_put(folio);
return -ENOMEM;
}
zswap_decompress(entry, folio);
count_vm_event(ZSWPWB);
if (entry->objcg)
count_objcg_events(entry->objcg, ZSWPWB, 1);
zswap_entry_free(entry);
/* folio is up to date */
folio_mark_uptodate(folio);
/* move it to the tail of the inactive list after end_writeback */
folio_set_reclaim(folio);
/* start writeback */
__swap_writepage(folio, &wbc);
folio_put(folio);
return 0;
}
/*********************************
* shrinker functions
**********************************/
/*
* The dynamic shrinker is modulated by the following factors:
*
* 1. Each zswap entry has a referenced bit, which the shrinker unsets (giving
* the entry a second chance) before rotating it in the LRU list. If the
* entry is considered again by the shrinker, with its referenced bit unset,
* it is written back. The writeback rate as a result is dynamically
* adjusted by the pool activities - if the pool is dominated by new entries
* (i.e lots of recent zswapouts), these entries will be protected and
* the writeback rate will slow down. On the other hand, if the pool has a
* lot of stagnant entries, these entries will be reclaimed immediately,
* effectively increasing the writeback rate.
*
* 2. Swapins counter: If we observe swapins, it is a sign that we are
* overshrinking and should slow down. We maintain a swapins counter, which
* is consumed and subtract from the number of eligible objects on the LRU
* in zswap_shrinker_count().
*
* 3. Compression ratio. The better the workload compresses, the less gains we
* can expect from writeback. We scale down the number of objects available
* for reclaim by this ratio.
*/
static enum lru_status shrink_memcg_cb(struct list_head *item, struct list_lru_one *l,
spinlock_t *lock, void *arg)
{
struct zswap_entry *entry = container_of(item, struct zswap_entry, lru);
bool *encountered_page_in_swapcache = (bool *)arg;
swp_entry_t swpentry;
enum lru_status ret = LRU_REMOVED_RETRY;
int writeback_result;
/*
* Second chance algorithm: if the entry has its referenced bit set, give it
* a second chance. Only clear the referenced bit and rotate it in the
* zswap's LRU list.
*/
if (entry->referenced) {
entry->referenced = false;
return LRU_ROTATE;
}
/*
* As soon as we drop the LRU lock, the entry can be freed by
* a concurrent invalidation. This means the following:
*
* 1. We extract the swp_entry_t to the stack, allowing
* zswap_writeback_entry() to pin the swap entry and
* then validate the zwap entry against that swap entry's
* tree using pointer value comparison. Only when that
* is successful can the entry be dereferenced.
*
* 2. Usually, objects are taken off the LRU for reclaim. In
* this case this isn't possible, because if reclaim fails
* for whatever reason, we have no means of knowing if the
* entry is alive to put it back on the LRU.
*
* So rotate it before dropping the lock. If the entry is
* written back or invalidated, the free path will unlink
* it. For failures, rotation is the right thing as well.
*
* Temporary failures, where the same entry should be tried
* again immediately, almost never happen for this shrinker.
* We don't do any trylocking; -ENOMEM comes closest,
* but that's extremely rare and doesn't happen spuriously
* either. Don't bother distinguishing this case.
*/
list_move_tail(item, &l->list);
/*
* Once the lru lock is dropped, the entry might get freed. The
* swpentry is copied to the stack, and entry isn't deref'd again
* until the entry is verified to still be alive in the tree.
*/
swpentry = entry->swpentry;
/*
* It's safe to drop the lock here because we return either
* LRU_REMOVED_RETRY or LRU_RETRY.
*/
spin_unlock(lock);
writeback_result = zswap_writeback_entry(entry, swpentry);
if (writeback_result) {
zswap_reject_reclaim_fail++;
ret = LRU_RETRY;
/*
* Encountering a page already in swap cache is a sign that we are shrinking
* into the warmer region. We should terminate shrinking (if we're in the dynamic
* shrinker context).
*/
if (writeback_result == -EEXIST && encountered_page_in_swapcache) {
ret = LRU_STOP;
*encountered_page_in_swapcache = true;
}
} else {
zswap_written_back_pages++;
}
spin_lock(lock);
return ret;
}
static unsigned long zswap_shrinker_scan(struct shrinker *shrinker,
struct shrink_control *sc)
{
unsigned long shrink_ret;
bool encountered_page_in_swapcache = false;
if (!zswap_shrinker_enabled ||
!mem_cgroup_zswap_writeback_enabled(sc->memcg)) {
sc->nr_scanned = 0;
return SHRINK_STOP;
}
shrink_ret = list_lru_shrink_walk(&zswap_list_lru, sc, &shrink_memcg_cb,
&encountered_page_in_swapcache);
if (encountered_page_in_swapcache)
return SHRINK_STOP;
return shrink_ret ? shrink_ret : SHRINK_STOP;
}
static unsigned long zswap_shrinker_count(struct shrinker *shrinker,
struct shrink_control *sc)
{
struct mem_cgroup *memcg = sc->memcg;
struct lruvec *lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(sc->nid));
atomic_long_t *nr_disk_swapins =
&lruvec->zswap_lruvec_state.nr_disk_swapins;
unsigned long nr_backing, nr_stored, nr_freeable, nr_disk_swapins_cur,
nr_remain;
if (!zswap_shrinker_enabled || !mem_cgroup_zswap_writeback_enabled(memcg))
return 0;
/*
* The shrinker resumes swap writeback, which will enter block
* and may enter fs. XXX: Harmonize with vmscan.c __GFP_FS
* rules (may_enter_fs()), which apply on a per-folio basis.
*/
if (!gfp_has_io_fs(sc->gfp_mask))
return 0;
/*
* For memcg, use the cgroup-wide ZSWAP stats since we don't
* have them per-node and thus per-lruvec. Careful if memcg is
* runtime-disabled: we can get sc->memcg == NULL, which is ok
* for the lruvec, but not for memcg_page_state().
*
* Without memcg, use the zswap pool-wide metrics.
*/
if (!mem_cgroup_disabled()) {
mem_cgroup_flush_stats(memcg);
nr_backing = memcg_page_state(memcg, MEMCG_ZSWAP_B) >> PAGE_SHIFT;
nr_stored = memcg_page_state(memcg, MEMCG_ZSWAPPED);
} else {
nr_backing = zswap_total_pages();
nr_stored = atomic_read(&zswap_stored_pages);
}
if (!nr_stored)
return 0;
nr_freeable = list_lru_shrink_count(&zswap_list_lru, sc);
if (!nr_freeable)
return 0;
/*
* Subtract from the lru size the number of pages that are recently swapped
* in from disk. The idea is that had we protect the zswap's LRU by this
* amount of pages, these disk swapins would not have happened.
*/
nr_disk_swapins_cur = atomic_long_read(nr_disk_swapins);
do {
if (nr_freeable >= nr_disk_swapins_cur)
nr_remain = 0;
else
nr_remain = nr_disk_swapins_cur - nr_freeable;
} while (!atomic_long_try_cmpxchg(
nr_disk_swapins, &nr_disk_swapins_cur, nr_remain));
nr_freeable -= nr_disk_swapins_cur - nr_remain;
if (!nr_freeable)
return 0;
/*
* Scale the number of freeable pages by the memory saving factor.
* This ensures that the better zswap compresses memory, the fewer
* pages we will evict to swap (as it will otherwise incur IO for
* relatively small memory saving).
*/
return mult_frac(nr_freeable, nr_backing, nr_stored);
}
static struct shrinker *zswap_alloc_shrinker(void)
{
struct shrinker *shrinker;
shrinker =
shrinker_alloc(SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, "mm-zswap");
if (!shrinker)
return NULL;
shrinker->scan_objects = zswap_shrinker_scan;
shrinker->count_objects = zswap_shrinker_count;
shrinker->batch = 0;
shrinker->seeks = DEFAULT_SEEKS;
return shrinker;
}
static int shrink_memcg(struct mem_cgroup *memcg)
{
int nid, shrunk = 0, scanned = 0;
if (!mem_cgroup_zswap_writeback_enabled(memcg))
return -ENOENT;
/*
* Skip zombies because their LRUs are reparented and we would be
* reclaiming from the parent instead of the dead memcg.
*/
if (memcg && !mem_cgroup_online(memcg))
return -ENOENT;
for_each_node_state(nid, N_NORMAL_MEMORY) {
unsigned long nr_to_walk = 1;
shrunk += list_lru_walk_one(&zswap_list_lru, nid, memcg,
&shrink_memcg_cb, NULL, &nr_to_walk);
scanned += 1 - nr_to_walk;
}
if (!scanned)
return -ENOENT;
return shrunk ? 0 : -EAGAIN;
}
static void shrink_worker(struct work_struct *w)
{
struct mem_cgroup *memcg;
int ret, failures = 0, attempts = 0;
unsigned long thr;
/* Reclaim down to the accept threshold */
thr = zswap_accept_thr_pages();
/*
* Global reclaim will select cgroup in a round-robin fashion from all
* online memcgs, but memcgs that have no pages in zswap and
* writeback-disabled memcgs (memory.zswap.writeback=0) are not
* candidates for shrinking.
*
* Shrinking will be aborted if we encounter the following
* MAX_RECLAIM_RETRIES times:
* - No writeback-candidate memcgs found in a memcg tree walk.
* - Shrinking a writeback-candidate memcg failed.
*
* We save iteration cursor memcg into zswap_next_shrink,
* which can be modified by the offline memcg cleaner
* zswap_memcg_offline_cleanup().
*
* Since the offline cleaner is called only once, we cannot leave an
* offline memcg reference in zswap_next_shrink.
* We can rely on the cleaner only if we get online memcg under lock.
*
* If we get an offline memcg, we cannot determine if the cleaner has
* already been called or will be called later. We must put back the
* reference before returning from this function. Otherwise, the
* offline memcg left in zswap_next_shrink will hold the reference
* until the next run of shrink_worker().
*/
do {
/*
* Start shrinking from the next memcg after zswap_next_shrink.
* When the offline cleaner has already advanced the cursor,
* advancing the cursor here overlooks one memcg, but this
* should be negligibly rare.
*
* If we get an online memcg, keep the extra reference in case
* the original one obtained by mem_cgroup_iter() is dropped by
* zswap_memcg_offline_cleanup() while we are shrinking the
* memcg.
*/
spin_lock(&zswap_shrink_lock);
do {
memcg = mem_cgroup_iter(NULL, zswap_next_shrink, NULL);
zswap_next_shrink = memcg;
} while (memcg && !mem_cgroup_tryget_online(memcg));
spin_unlock(&zswap_shrink_lock);
if (!memcg) {
/*
* Continue shrinking without incrementing failures if
* we found candidate memcgs in the last tree walk.
*/
if (!attempts && ++failures == MAX_RECLAIM_RETRIES)
break;
attempts = 0;
goto resched;
}
ret = shrink_memcg(memcg);
/* drop the extra reference */
mem_cgroup_put(memcg);
/*
* There are no writeback-candidate pages in the memcg.
* This is not an issue as long as we can find another memcg
* with pages in zswap. Skip this without incrementing attempts
* and failures.
*/
if (ret == -ENOENT)
continue;
++attempts;
if (ret && ++failures == MAX_RECLAIM_RETRIES)
break;
resched:
cond_resched();
} while (zswap_total_pages() > thr);
}
/*********************************
* main API
**********************************/
bool zswap_store(struct folio *folio)
{
swp_entry_t swp = folio->swap;
pgoff_t offset = swp_offset(swp);
struct xarray *tree = swap_zswap_tree(swp);
struct zswap_entry *entry, *old;
struct obj_cgroup *objcg = NULL;
struct mem_cgroup *memcg = NULL;
VM_WARN_ON_ONCE(!folio_test_locked(folio));
VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
/* Large folios aren't supported */
if (folio_test_large(folio))
return false;
if (!zswap_enabled)
goto check_old;
/* Check cgroup limits */
objcg = get_obj_cgroup_from_folio(folio);
if (objcg && !obj_cgroup_may_zswap(objcg)) {
memcg = get_mem_cgroup_from_objcg(objcg);
if (shrink_memcg(memcg)) {
mem_cgroup_put(memcg);
goto reject;
}
mem_cgroup_put(memcg);
}
if (zswap_check_limits())
goto reject;
/* allocate entry */
entry = zswap_entry_cache_alloc(GFP_KERNEL, folio_nid(folio));
if (!entry) {
zswap_reject_kmemcache_fail++;
goto reject;
}
/* if entry is successfully added, it keeps the reference */
entry->pool = zswap_pool_current_get();
if (!entry->pool)
goto freepage;
if (objcg) {
memcg = get_mem_cgroup_from_objcg(objcg);
if (memcg_list_lru_alloc(memcg, &zswap_list_lru, GFP_KERNEL)) {
mem_cgroup_put(memcg);
goto put_pool;
}
mem_cgroup_put(memcg);
}
if (!zswap_compress(folio, entry))
goto put_pool;
entry->swpentry = swp;
entry->objcg = objcg;
entry->referenced = true;
old = xa_store(tree, offset, entry, GFP_KERNEL);
if (xa_is_err(old)) {
int err = xa_err(old);
WARN_ONCE(err != -ENOMEM, "unexpected xarray error: %d\n", err);
zswap_reject_alloc_fail++;
goto store_failed;
}
/*
* We may have had an existing entry that became stale when
* the folio was redirtied and now the new version is being
* swapped out. Get rid of the old.
*/
if (old)
zswap_entry_free(old);
if (objcg) {
obj_cgroup_charge_zswap(objcg, entry->length);
count_objcg_events(objcg, ZSWPOUT, 1);
}
/*
* We finish initializing the entry while it's already in xarray.
* This is safe because:
*
* 1. Concurrent stores and invalidations are excluded by folio lock.
*
* 2. Writeback is excluded by the entry not being on the LRU yet.
* The publishing order matters to prevent writeback from seeing
* an incoherent entry.
*/
if (entry->length) {
INIT_LIST_HEAD(&entry->lru);
zswap_lru_add(&zswap_list_lru, entry);
}
/* update stats */
atomic_inc(&zswap_stored_pages);
count_vm_event(ZSWPOUT);
return true;
store_failed:
zpool_free(entry->pool->zpool, entry->handle);
put_pool:
zswap_pool_put(entry->pool);
freepage:
zswap_entry_cache_free(entry);
reject:
obj_cgroup_put(objcg);
if (zswap_pool_reached_full)
queue_work(shrink_wq, &zswap_shrink_work);
check_old:
/*
* If the zswap store fails or zswap is disabled, we must invalidate the
* possibly stale entry which was previously stored at this offset.
* Otherwise, writeback could overwrite the new data in the swapfile.
*/
entry = xa_erase(tree, offset);
if (entry)
zswap_entry_free(entry);
return false;
}
bool zswap_load(struct folio *folio)
{
swp_entry_t swp = folio->swap;
pgoff_t offset = swp_offset(swp);
bool swapcache = folio_test_swapcache(folio);
struct xarray *tree = swap_zswap_tree(swp);
struct zswap_entry *entry;
VM_WARN_ON_ONCE(!folio_test_locked(folio));
if (zswap_never_enabled())
return false;
/*
* Large folios should not be swapped in while zswap is being used, as
* they are not properly handled. Zswap does not properly load large
* folios, and a large folio may only be partially in zswap.
*
* Return true without marking the folio uptodate so that an IO error is
* emitted (e.g. do_swap_page() will sigbus).
*/
if (WARN_ON_ONCE(folio_test_large(folio)))
return true;
/*
* When reading into the swapcache, invalidate our entry. The
* swapcache can be the authoritative owner of the page and
* its mappings, and the pressure that results from having two
* in-memory copies outweighs any benefits of caching the
* compression work.
*
* (Most swapins go through the swapcache. The notable
* exception is the singleton fault on SWP_SYNCHRONOUS_IO
* files, which reads into a private page and may free it if
* the fault fails. We remain the primary owner of the entry.)
*/
if (swapcache)
entry = xa_erase(tree, offset);
else
entry = xa_load(tree, offset);
if (!entry)
return false;
zswap_decompress(entry, folio);
count_vm_event(ZSWPIN);
if (entry->objcg)
count_objcg_events(entry->objcg, ZSWPIN, 1);
if (swapcache) {
zswap_entry_free(entry);
folio_mark_dirty(folio);
}
folio_mark_uptodate(folio);
return true;
}
void zswap_invalidate(swp_entry_t swp)
{
pgoff_t offset = swp_offset(swp);
struct xarray *tree = swap_zswap_tree(swp);
struct zswap_entry *entry;
entry = xa_erase(tree, offset);
if (entry)
zswap_entry_free(entry);
}
int zswap_swapon(int type, unsigned long nr_pages)
{
struct xarray *trees, *tree;
unsigned int nr, i;
nr = DIV_ROUND_UP(nr_pages, SWAP_ADDRESS_SPACE_PAGES);
trees = kvcalloc(nr, sizeof(*tree), GFP_KERNEL);
if (!trees) {
pr_err("alloc failed, zswap disabled for swap type %d\n", type);
return -ENOMEM;
}
for (i = 0; i < nr; i++)
xa_init(trees + i);
nr_zswap_trees[type] = nr;
zswap_trees[type] = trees;
return 0;
}
void zswap_swapoff(int type)
{
struct xarray *trees = zswap_trees[type];
unsigned int i;
if (!trees)
return;
/* try_to_unuse() invalidated all the entries already */
for (i = 0; i < nr_zswap_trees[type]; i++)
WARN_ON_ONCE(!xa_empty(trees + i));
kvfree(trees);
nr_zswap_trees[type] = 0;
zswap_trees[type] = NULL;
}
/*********************************
* debugfs functions
**********************************/
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
static struct dentry *zswap_debugfs_root;
static int debugfs_get_total_size(void *data, u64 *val)
{
*val = zswap_total_pages() * PAGE_SIZE;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(total_size_fops, debugfs_get_total_size, NULL, "%llu\n");
static int zswap_debugfs_init(void)
{
if (!debugfs_initialized())
return -ENODEV;
zswap_debugfs_root = debugfs_create_dir("zswap", NULL);
debugfs_create_u64("pool_limit_hit", 0444,
zswap_debugfs_root, &zswap_pool_limit_hit);
debugfs_create_u64("reject_reclaim_fail", 0444,
zswap_debugfs_root, &zswap_reject_reclaim_fail);
debugfs_create_u64("reject_alloc_fail", 0444,
zswap_debugfs_root, &zswap_reject_alloc_fail);
debugfs_create_u64("reject_kmemcache_fail", 0444,
zswap_debugfs_root, &zswap_reject_kmemcache_fail);
debugfs_create_u64("reject_compress_fail", 0444,
zswap_debugfs_root, &zswap_reject_compress_fail);
debugfs_create_u64("reject_compress_poor", 0444,
zswap_debugfs_root, &zswap_reject_compress_poor);
debugfs_create_u64("written_back_pages", 0444,
zswap_debugfs_root, &zswap_written_back_pages);
debugfs_create_file("pool_total_size", 0444,
zswap_debugfs_root, NULL, &total_size_fops);
debugfs_create_atomic_t("stored_pages", 0444,
zswap_debugfs_root, &zswap_stored_pages);
return 0;
}
#else
static int zswap_debugfs_init(void)
{
return 0;
}
#endif
/*********************************
* module init and exit
**********************************/
static int zswap_setup(void)
{
struct zswap_pool *pool;
int ret;
zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
if (!zswap_entry_cache) {
pr_err("entry cache creation failed\n");
goto cache_fail;
}
ret = cpuhp_setup_state_multi(CPUHP_MM_ZSWP_POOL_PREPARE,
"mm/zswap_pool:prepare",
zswap_cpu_comp_prepare,
zswap_cpu_comp_dead);
if (ret)
goto hp_fail;
shrink_wq = alloc_workqueue("zswap-shrink",
WQ_UNBOUND|WQ_MEM_RECLAIM, 1);
if (!shrink_wq)
goto shrink_wq_fail;
zswap_shrinker = zswap_alloc_shrinker();
if (!zswap_shrinker)
goto shrinker_fail;
if (list_lru_init_memcg(&zswap_list_lru, zswap_shrinker))
goto lru_fail;
shrinker_register(zswap_shrinker);
INIT_WORK(&zswap_shrink_work, shrink_worker);
pool = __zswap_pool_create_fallback();
if (pool) {
pr_info("loaded using pool %s/%s\n", pool->tfm_name,
zpool_get_type(pool->zpool));
list_add(&pool->list, &zswap_pools);
zswap_has_pool = true;
static_branch_enable(&zswap_ever_enabled);
} else {
pr_err("pool creation failed\n");
zswap_enabled = false;
}
if (zswap_debugfs_init())
pr_warn("debugfs initialization failed\n");
zswap_init_state = ZSWAP_INIT_SUCCEED;
return 0;
lru_fail:
shrinker_free(zswap_shrinker);
shrinker_fail:
destroy_workqueue(shrink_wq);
shrink_wq_fail:
cpuhp_remove_multi_state(CPUHP_MM_ZSWP_POOL_PREPARE);
hp_fail:
kmem_cache_destroy(zswap_entry_cache);
cache_fail:
/* if built-in, we aren't unloaded on failure; don't allow use */
zswap_init_state = ZSWAP_INIT_FAILED;
zswap_enabled = false;
return -ENOMEM;
}
static int __init zswap_init(void)
{
if (!zswap_enabled)
return 0;
return zswap_setup();
}
/* must be late so crypto has time to come up */
late_initcall(zswap_init);
MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
MODULE_DESCRIPTION("Compressed cache for swap pages");