1
linux/drivers/thermal/dove_thermal.c
Uwe Kleine-König 7aa234e99f thermal: dove: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-29 12:34:16 +02:00

185 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Dove thermal sensor driver
*
* Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>
#define DOVE_THERMAL_TEMP_OFFSET 1
#define DOVE_THERMAL_TEMP_MASK 0x1FF
/* Dove Thermal Manager Control and Status Register */
#define PMU_TM_DISABLE_OFFS 0
#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
/* Dove Theraml Diode Control 0 Register */
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
#define PMU_TDC0_SEL_VCAL_OFFS 5
#define PMU_TDC0_SEL_VCAL_MASK (0x3 << PMU_TDC0_SEL_VCAL_OFFS)
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1FF << PMU_TDC0_REF_CAL_CNT_OFFS)
#define PMU_TDC0_AVG_NUM_OFFS 25
#define PMU_TDC0_AVG_NUM_MASK (0x7 << PMU_TDC0_AVG_NUM_OFFS)
/* Dove Thermal Diode Control 1 Register */
#define PMU_TEMP_DIOD_CTRL1_REG 0x04
#define PMU_TDC1_TEMP_VALID_MASK (0x1 << 10)
/* Dove Thermal Sensor Dev Structure */
struct dove_thermal_priv {
void __iomem *sensor;
void __iomem *control;
};
static int dove_init_sensor(const struct dove_thermal_priv *priv)
{
u32 reg;
u32 i;
/* Configure the Diode Control Register #0 */
reg = readl_relaxed(priv->control);
/* Use average of 2 */
reg &= ~PMU_TDC0_AVG_NUM_MASK;
reg |= (0x1 << PMU_TDC0_AVG_NUM_OFFS);
/* Reference calibration value */
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
reg |= (0x0F1 << PMU_TDC0_REF_CAL_CNT_OFFS);
/* Set the high level reference for calibration */
reg &= ~PMU_TDC0_SEL_VCAL_MASK;
reg |= (0x2 << PMU_TDC0_SEL_VCAL_OFFS);
writel(reg, priv->control);
/* Reset the sensor */
reg = readl_relaxed(priv->control);
writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
writel(reg, priv->control);
/* Enable the sensor */
reg = readl_relaxed(priv->sensor);
reg &= ~PMU_TM_DISABLE_MASK;
writel(reg, priv->sensor);
/* Poll the sensor for the first reading */
for (i = 0; i < 1000000; i++) {
reg = readl_relaxed(priv->sensor);
if (reg & DOVE_THERMAL_TEMP_MASK)
break;
}
if (i == 1000000)
return -EIO;
return 0;
}
static int dove_get_temp(struct thermal_zone_device *thermal,
int *temp)
{
unsigned long reg;
struct dove_thermal_priv *priv = thermal_zone_device_priv(thermal);
/* Valid check */
reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
return -EIO;
/*
* Calculate temperature. According to Marvell internal
* documentation the formula for this is:
* Celsius = (322-reg)/1.3625
*/
reg = readl_relaxed(priv->sensor);
reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
*temp = ((3220000000UL - (10000000UL * reg)) / 13625);
return 0;
}
static struct thermal_zone_device_ops ops = {
.get_temp = dove_get_temp,
};
static const struct of_device_id dove_thermal_id_table[] = {
{ .compatible = "marvell,dove-thermal" },
{}
};
static int dove_thermal_probe(struct platform_device *pdev)
{
struct thermal_zone_device *thermal = NULL;
struct dove_thermal_priv *priv;
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->sensor = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(priv->sensor))
return PTR_ERR(priv->sensor);
priv->control = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
if (IS_ERR(priv->control))
return PTR_ERR(priv->control);
ret = dove_init_sensor(priv);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize sensor\n");
return ret;
}
thermal = thermal_tripless_zone_device_register("dove_thermal", priv,
&ops, NULL);
if (IS_ERR(thermal)) {
dev_err(&pdev->dev,
"Failed to register thermal zone device\n");
return PTR_ERR(thermal);
}
ret = thermal_zone_device_enable(thermal);
if (ret) {
thermal_zone_device_unregister(thermal);
return ret;
}
platform_set_drvdata(pdev, thermal);
return 0;
}
static void dove_thermal_exit(struct platform_device *pdev)
{
struct thermal_zone_device *dove_thermal =
platform_get_drvdata(pdev);
thermal_zone_device_unregister(dove_thermal);
}
MODULE_DEVICE_TABLE(of, dove_thermal_id_table);
static struct platform_driver dove_thermal_driver = {
.probe = dove_thermal_probe,
.remove_new = dove_thermal_exit,
.driver = {
.name = "dove_thermal",
.of_match_table = dove_thermal_id_table,
},
};
module_platform_driver(dove_thermal_driver);
MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
MODULE_DESCRIPTION("Dove thermal driver");
MODULE_LICENSE("GPL");