kevin/linux
1
Fork 0
Code
master
linux/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
Vishnu Reddy e61f1a729d pinctrl: samsung: Add support for pull-up and pull-down 
Gpiolib framework has the implementation of setting up the
PUD configuration for GPIO pins but there is no driver support.

Add support to handle the PUD configuration request from the
userspace in samsung pinctrl driver.

Signed-off-by: Vishnu Reddy <vishnu.reddy@samsung.com>
Link: https://lore.kernel.org/r/20240729153631.24536-1-vishnu.reddy@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-08 17:22:04 +02:00

908 lines
34 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0+
//
// Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
//
// Copyright (c) 2012 Samsung Electronics Co., Ltd.
// http://www.samsung.com
// Copyright (c) 2012 Linaro Ltd
// http://www.linaro.org
//
// Author: Thomas Abraham <thomas.ab@samsung.com>
//
// This file contains the Samsung Exynos specific information required by the
// the Samsung pinctrl/gpiolib driver. It also includes the implementation of
// external gpio and wakeup interrupt support.
#include <linux/device.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
static const struct samsung_pin_bank_type bank_type_off = {
.fld_width = { 4, 1, 2, 2, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
};
static const struct samsung_pin_bank_type bank_type_alive = {
.fld_width = { 4, 1, 2, 2, },
.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
};
/* Retention control for S5PV210 are located at the end of clock controller */
#define S5P_OTHERS 0xE000
#define S5P_OTHERS_RET_IO (1 << 31)
#define S5P_OTHERS_RET_CF (1 << 30)
#define S5P_OTHERS_RET_MMC (1 << 29)
#define S5P_OTHERS_RET_UART (1 << 28)
#define S5P_PIN_PULL_DISABLE 0
#define S5P_PIN_PULL_DOWN 1
#define S5P_PIN_PULL_UP 2
static void s5pv210_pud_value_init(struct samsung_pinctrl_drv_data *drvdata)
{
unsigned int *pud_val = drvdata->pud_val;
pud_val[PUD_PULL_DISABLE] = S5P_PIN_PULL_DISABLE;
pud_val[PUD_PULL_DOWN] = S5P_PIN_PULL_DOWN;
pud_val[PUD_PULL_UP] = S5P_PIN_PULL_UP;
}
static void s5pv210_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
{
void __iomem *clk_base = (void __iomem *)drvdata->retention_ctrl->priv;
u32 tmp;
tmp = __raw_readl(clk_base + S5P_OTHERS);
tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF | S5P_OTHERS_RET_MMC |
S5P_OTHERS_RET_UART);
__raw_writel(tmp, clk_base + S5P_OTHERS);
}
static struct samsung_retention_ctrl *
s5pv210_retention_init(struct samsung_pinctrl_drv_data *drvdata,
const struct samsung_retention_data *data)
{
struct samsung_retention_ctrl *ctrl;
struct device_node *np;
void __iomem *clk_base;
ctrl = devm_kzalloc(drvdata->dev, sizeof(*ctrl), GFP_KERNEL);
if (!ctrl)
return ERR_PTR(-ENOMEM);
np = of_find_compatible_node(NULL, NULL, "samsung,s5pv210-clock");
if (!np) {
pr_err("%s: failed to find clock controller DT node\n",
__func__);
return ERR_PTR(-ENODEV);
}
clk_base = of_iomap(np, 0);
of_node_put(np);
if (!clk_base) {
pr_err("%s: failed to map clock registers\n", __func__);
return ERR_PTR(-EINVAL);
}
ctrl->priv = (void __force *)clk_base;
ctrl->disable = s5pv210_retention_disable;
return ctrl;
}
static const struct samsung_retention_data s5pv210_retention_data __initconst = {
.init = s5pv210_retention_init,
};
/* pin banks of s5pv210 pin-controller */
static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(6, 0x0c0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpe0", 0x1c),
EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpe1", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpf0", 0x24),
EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpf1", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpf2", 0x2c),
EXYNOS_PIN_BANK_EINTG(6, 0x180, "gpf3", 0x30),
EXYNOS_PIN_BANK_EINTG(7, 0x1a0, "gpg0", 0x34),
EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38),
EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c),
EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40),
EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44),
EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48),
EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c),
EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50),
EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54),
EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"),
EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"),
EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"),
EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"),
EXYNOS_PIN_BANK_EINTN(8, 0x340, "mp04"),
EXYNOS_PIN_BANK_EINTN(8, 0x360, "mp05"),
EXYNOS_PIN_BANK_EINTN(8, 0x380, "mp06"),
EXYNOS_PIN_BANK_EINTN(8, 0x3a0, "mp07"),
EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gph0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xc20, "gph1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xc40, "gph2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gph3", 0x0c),
};
static const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = s5pv210_pin_bank,
.nr_banks = ARRAY_SIZE(s5pv210_pin_bank),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.pud_value_init = s5pv210_pud_value_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &s5pv210_retention_data,
},
};
const struct samsung_pinctrl_of_match_data s5pv210_of_data __initconst = {
.ctrl = s5pv210_pin_ctrl,
.num_ctrl = ARRAY_SIZE(s5pv210_pin_ctrl),
};
/* Pad retention control code for accessing PMU regmap */
static atomic_t exynos_shared_retention_refcnt;
/* pin banks of exynos3250 pin-controller 0 */
static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpd1", 0x18),
};
/* pin banks of exynos3250 pin-controller 1 */
static const struct samsung_pin_bank_data exynos3250_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpe0"),
EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpe1"),
EXYNOS_PIN_BANK_EINTN(3, 0x180, "gpe2"),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0c0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28),
EXYNOS_PIN_BANK_EINTG(5, 0x2a0, "gpm2", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x2c0, "gpm3", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x2e0, "gpm4", 0x34),
EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xc20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xc40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gpx3", 0x0c),
};
/*
* PMU pad retention groups for Exynos3250 doesn't match pin banks, so handle
* them all together
*/
static const u32 exynos3250_retention_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
S5P_PAD_RET_MMC2_OPTION,
S5P_PAD_RET_SPI_OPTION,
};
static const struct samsung_retention_data exynos3250_retention_data __initconst = {
.regs = exynos3250_retention_regs,
.nr_regs = ARRAY_SIZE(exynos3250_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos3250 SoC. Exynos3250 SoC includes
* two gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos3250_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos3250_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos3250_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos3250_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos3250_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos3250_retention_data,
},
};
const struct samsung_pinctrl_of_match_data exynos3250_of_data __initconst = {
.ctrl = exynos3250_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos3250_pin_ctrl),
};
/* pin banks of exynos4210 pin-controller 0 */
static const struct samsung_pin_bank_data exynos4210_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(5, 0x0E0, "gpe0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpe1", 0x20),
EXYNOS_PIN_BANK_EINTG(6, 0x120, "gpe2", 0x24),
EXYNOS_PIN_BANK_EINTG(8, 0x140, "gpe3", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x160, "gpe4", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
};
/* pin banks of exynos4210 pin-controller 1 */
static const struct samsung_pin_bank_data exynos4210_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpj0", 0x00),
EXYNOS_PIN_BANK_EINTG(5, 0x020, "gpj1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(3, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4210 pin-controller 2 */
static const struct samsung_pin_bank_data exynos4210_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/* PMU pad retention groups registers for Exynos4 (without audio) */
static const u32 exynos4_retention_regs[] = {
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
};
static const struct samsung_retention_data exynos4_retention_data __initconst = {
.regs = exynos4_retention_regs,
.nr_regs = ARRAY_SIZE(exynos4_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/* PMU retention control for audio pins can be tied to audio pin bank */
static const u32 exynos4_audio_retention_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
};
static const struct samsung_retention_data exynos4_audio_retention_data __initconst = {
.regs = exynos4_audio_retention_regs,
.nr_regs = ARRAY_SIZE(exynos4_audio_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
* three gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4210_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.retention_data = &exynos4_audio_retention_data,
},
};
const struct samsung_pinctrl_of_match_data exynos4210_of_data __initconst = {
.ctrl = exynos4210_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos4210_pin_ctrl),
};
/* pin banks of exynos4x12 pin-controller 0 */
static const struct samsung_pin_bank_data exynos4x12_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpb", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpc0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpc1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpd0", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpd1", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpf0", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpf1", 0x34),
EXYNOS_PIN_BANK_EINTG(8, 0x1C0, "gpf2", 0x38),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf3", 0x3c),
EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x40),
EXYNOS_PIN_BANK_EINTG(5, 0x260, "gpj1", 0x44),
};
/* pin banks of exynos4x12 pin-controller 1 */
static const struct samsung_pin_bank_data exynos4x12_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpk0", 0x08),
EXYNOS_PIN_BANK_EINTG(7, 0x060, "gpk1", 0x0c),
EXYNOS_PIN_BANK_EINTG(7, 0x080, "gpk2", 0x10),
EXYNOS_PIN_BANK_EINTG(7, 0x0A0, "gpk3", 0x14),
EXYNOS_PIN_BANK_EINTG(7, 0x0C0, "gpl0", 0x18),
EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpl1", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpl2", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x260, "gpm0", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x280, "gpm1", 0x28),
EXYNOS_PIN_BANK_EINTG(5, 0x2A0, "gpm2", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x2C0, "gpm3", 0x30),
EXYNOS_PIN_BANK_EINTG(8, 0x2E0, "gpm4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x120, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x140, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x160, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos4x12 pin-controller 2 */
static const struct samsung_pin_bank_data exynos4x12_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/* pin banks of exynos4x12 pin-controller 3 */
static const struct samsung_pin_bank_data exynos4x12_pin_banks3[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpv4", 0x10),
};
/*
* Samsung pinctrl driver data for Exynos4x12 SoC. Exynos4x12 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos4x12_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4x12_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4x12_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_audio_retention_data,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos4x12_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos4x12_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
},
};
const struct samsung_pinctrl_of_match_data exynos4x12_of_data __initconst = {
.ctrl = exynos4x12_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos4x12_pin_ctrl),
};
/* pin banks of exynos5250 pin-controller 0 */
static const struct samsung_pin_bank_data exynos5250_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5250 pin-controller 1 */
static const struct samsung_pin_bank_data exynos5250_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
};
/* pin banks of exynos5250 pin-controller 2 */
static const struct samsung_pin_bank_data exynos5250_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
};
/* pin banks of exynos5250 pin-controller 3 */
static const struct samsung_pin_bank_data exynos5250_pin_banks3[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/*
* Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5250_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5250_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5250_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5250_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_audio_retention_data,
},
};
const struct samsung_pinctrl_of_match_data exynos5250_of_data __initconst = {
.ctrl = exynos5250_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos5250_pin_ctrl),
};
/* pin banks of exynos5260 pin-controller 0 */
static const struct samsung_pin_bank_data exynos5260_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(7, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(4, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(5, 0x0a0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpb4", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gpb5", 0x20),
EXYNOS_PIN_BANK_EINTG(8, 0x120, "gpd0", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpd1", 0x28),
EXYNOS_PIN_BANK_EINTG(5, 0x160, "gpd2", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpe0", 0x30),
EXYNOS_PIN_BANK_EINTG(5, 0x1a0, "gpe1", 0x34),
EXYNOS_PIN_BANK_EINTG(4, 0x1c0, "gpf0", 0x38),
EXYNOS_PIN_BANK_EINTG(8, 0x1e0, "gpf1", 0x3c),
EXYNOS_PIN_BANK_EINTG(2, 0x200, "gpk0", 0x40),
EXYNOS_PIN_BANK_EINTW(8, 0xc00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xc20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xc40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gpx3", 0x0c),
};
/* pin banks of exynos5260 pin-controller 1 */
static const struct samsung_pin_bank_data exynos5260_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpc0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpc1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
EXYNOS_PIN_BANK_EINTG(4, 0x080, "gpc4", 0x10),
};
/* pin banks of exynos5260 pin-controller 2 */
static const struct samsung_pin_bank_data exynos5260_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
};
/*
* Samsung pinctrl driver data for Exynos5260 SoC. Exynos5260 SoC includes
* three gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos5260_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5260_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5260_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5260_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5260_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5260_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5260_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
},
};
const struct samsung_pinctrl_of_match_data exynos5260_of_data __initconst = {
.ctrl = exynos5260_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos5260_pin_ctrl),
};
/* pin banks of exynos5410 pin-controller 0 */
static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf0", 0x38),
EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpf1", 0x3c),
EXYNOS_PIN_BANK_EINTG(8, 0x220, "gpg0", 0x40),
EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpg1", 0x44),
EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x320, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x340, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x360, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x380, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x3A0, "gpy6"),
EXYNOS_PIN_BANK_EINTN(8, 0x3C0, "gpy7"),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5410 pin-controller 1 */
static const struct samsung_pin_bank_data exynos5410_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpj3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpj4", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpk0", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpk1", 0x18),
EXYNOS_PIN_BANK_EINTG(8, 0x0E0, "gpk2", 0x1c),
EXYNOS_PIN_BANK_EINTG(7, 0x100, "gpk3", 0x20),
};
/* pin banks of exynos5410 pin-controller 2 */
static const struct samsung_pin_bank_data exynos5410_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
};
/* pin banks of exynos5410 pin-controller 3 */
static const struct samsung_pin_bank_data exynos5410_pin_banks3[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/*
* Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos5410_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5410_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5410_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5410_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5410_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5410_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5410_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5410_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5410_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
},
};
const struct samsung_pinctrl_of_match_data exynos5410_of_data __initconst = {
.ctrl = exynos5410_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos5410_pin_ctrl),
};
/* pin banks of exynos5420 pin-controller 0 */
static const struct samsung_pin_bank_data exynos5420_pin_banks0[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
};
/* pin banks of exynos5420 pin-controller 1 */
static const struct samsung_pin_bank_data exynos5420_pin_banks1[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00),
EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04),
EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpc4", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpd1", 0x14),
EXYNOS_PIN_BANK_EINTN(6, 0x0C0, "gpy0"),
EXYNOS_PIN_BANK_EINTN(4, 0x0E0, "gpy1"),
EXYNOS_PIN_BANK_EINTN(6, 0x100, "gpy2"),
EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpy3"),
EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpy4"),
EXYNOS_PIN_BANK_EINTN(8, 0x160, "gpy5"),
EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy6"),
};
/* pin banks of exynos5420 pin-controller 2 */
static const struct samsung_pin_bank_data exynos5420_pin_banks2[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08),
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpf1", 0x0c),
EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gpj4", 0x1c),
};
/* pin banks of exynos5420 pin-controller 3 */
static const struct samsung_pin_bank_data exynos5420_pin_banks3[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpb3", 0x18),
EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpb4", 0x1c),
EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph0", 0x20),
};
/* pin banks of exynos5420 pin-controller 4 */
static const struct samsung_pin_bank_data exynos5420_pin_banks4[] __initconst = {
/* Must start with EINTG banks, ordered by EINT group number. */
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/* PMU pad retention groups registers for Exynos5420 (without audio) */
static const u32 exynos5420_retention_regs[] = {
EXYNOS_PAD_RET_DRAM_OPTION,
EXYNOS_PAD_RET_JTAG_OPTION,
EXYNOS5420_PAD_RET_GPIO_OPTION,
EXYNOS5420_PAD_RET_UART_OPTION,
EXYNOS5420_PAD_RET_MMCA_OPTION,
EXYNOS5420_PAD_RET_MMCB_OPTION,
EXYNOS5420_PAD_RET_MMCC_OPTION,
EXYNOS5420_PAD_RET_HSI_OPTION,
EXYNOS_PAD_RET_EBIA_OPTION,
EXYNOS_PAD_RET_EBIB_OPTION,
EXYNOS5420_PAD_RET_SPI_OPTION,
EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION,
};
static const struct samsung_retention_data exynos5420_retention_data __initconst = {
.regs = exynos5420_retention_regs,
.nr_regs = ARRAY_SIZE(exynos5420_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes
* four gpio/pin-mux/pinconfig controllers.
*/
static const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 data */
.pin_banks = exynos5420_pin_banks0,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5420_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5420_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5420_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 4 data */
.pin_banks = exynos5420_pin_banks4,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks4),
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_audio_retention_data,
},
};
const struct samsung_pinctrl_of_match_data exynos5420_of_data __initconst = {
.ctrl = exynos5420_pin_ctrl,
.num_ctrl = ARRAY_SIZE(exynos5420_pin_ctrl),
};
View Git Blame Copy Permalink