1fd4b3fe52
Modern platforms can install more than 4GB memory, so DMA address can
larger than 32 bits. If a platform doesn't enable IOMMU, kernel needs extra
works of swiotlb to help DMA that packets reside on memory over 4GB.
The DMA addressing capability of Realtek WiFi chips is 36 bits, so set
LSB 4 bits of high 32-bit address to register and TX/RX descriptor, which
below figure shows 3-level pointers in TX direction, and RX direction is
similar but 2-level pointers only.
+--------+
| | register to head of TX BD
+---|----+
| +---------+
+-----> | TX BD | (in memory)
+----|----+
| +---------+
+------> | TX WD | (in memory)
+----|----+
| +--------+
+------> | skb |
+--------+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240611021901.26394-1-pkshih@realtek.com
123 lines
3.7 KiB
C
123 lines
3.7 KiB
C
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
|
|
/* Copyright(c) 2020-2022 Realtek Corporation
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include "pci.h"
|
|
#include "reg.h"
|
|
#include "rtw8852c.h"
|
|
|
|
static const struct rtw89_pci_bd_idx_addr rtw8852c_bd_idx_addr_low_power = {
|
|
.tx_bd_addrs = {R_AX_DRV_FW_HSK_0, R_AX_DRV_FW_HSK_1, R_AX_DRV_FW_HSK_2,
|
|
R_AX_DRV_FW_HSK_3, 0, 0,
|
|
0, 0, R_AX_DRV_FW_HSK_4,
|
|
0, 0, 0,
|
|
R_AX_DRV_FW_HSK_5},
|
|
.rx_bd_addrs = {R_AX_DRV_FW_HSK_6, R_AX_DRV_FW_HSK_7},
|
|
};
|
|
|
|
static const struct rtw89_pci_info rtw8852c_pci_info = {
|
|
.gen_def = &rtw89_pci_gen_ax,
|
|
.txbd_trunc_mode = MAC_AX_BD_TRUNC,
|
|
.rxbd_trunc_mode = MAC_AX_BD_TRUNC,
|
|
.rxbd_mode = MAC_AX_RXBD_PKT,
|
|
.tag_mode = MAC_AX_TAG_MULTI,
|
|
.tx_burst = MAC_AX_TX_BURST_V1_256B,
|
|
.rx_burst = MAC_AX_RX_BURST_V1_128B,
|
|
.wd_dma_idle_intvl = MAC_AX_WD_DMA_INTVL_256NS,
|
|
.wd_dma_act_intvl = MAC_AX_WD_DMA_INTVL_256NS,
|
|
.multi_tag_num = MAC_AX_TAG_NUM_8,
|
|
.lbc_en = MAC_AX_PCIE_ENABLE,
|
|
.lbc_tmr = MAC_AX_LBC_TMR_2MS,
|
|
.autok_en = MAC_AX_PCIE_DISABLE,
|
|
.io_rcy_en = MAC_AX_PCIE_ENABLE,
|
|
.io_rcy_tmr = MAC_AX_IO_RCY_ANA_TMR_6MS,
|
|
.rx_ring_eq_is_full = false,
|
|
.check_rx_tag = false,
|
|
|
|
.init_cfg_reg = R_AX_HAXI_INIT_CFG1,
|
|
.txhci_en_bit = B_AX_TXHCI_EN_V1,
|
|
.rxhci_en_bit = B_AX_RXHCI_EN_V1,
|
|
.rxbd_mode_bit = B_AX_RXBD_MODE_V1,
|
|
.exp_ctrl_reg = R_AX_HAXI_EXP_CTRL,
|
|
.max_tag_num_mask = B_AX_MAX_TAG_NUM_V1_MASK,
|
|
.rxbd_rwptr_clr_reg = R_AX_RXBD_RWPTR_CLR_V1,
|
|
.txbd_rwptr_clr2_reg = R_AX_TXBD_RWPTR_CLR2_V1,
|
|
.dma_io_stop = {R_AX_HAXI_INIT_CFG1, B_AX_STOP_AXI_MST},
|
|
.dma_stop1 = {R_AX_HAXI_DMA_STOP1, B_AX_TX_STOP1_MASK},
|
|
.dma_stop2 = {R_AX_HAXI_DMA_STOP2, B_AX_TX_STOP2_ALL},
|
|
.dma_busy1 = {R_AX_HAXI_DMA_BUSY1, DMA_BUSY1_CHECK},
|
|
.dma_busy2_reg = R_AX_HAXI_DMA_BUSY2,
|
|
.dma_busy3_reg = R_AX_HAXI_DMA_BUSY3,
|
|
|
|
.rpwm_addr = R_AX_PCIE_HRPWM_V1,
|
|
.cpwm_addr = R_AX_PCIE_CRPWM,
|
|
.mit_addr = R_AX_INT_MIT_RX_V1,
|
|
.wp_sel_addr = R_AX_WP_ADDR_H_SEL0_3,
|
|
.tx_dma_ch_mask = 0,
|
|
.bd_idx_addr_low_power = &rtw8852c_bd_idx_addr_low_power,
|
|
.dma_addr_set = &rtw89_pci_ch_dma_addr_set_v1,
|
|
.bd_ram_table = &rtw89_bd_ram_table_dual,
|
|
|
|
.ltr_set = rtw89_pci_ltr_set_v1,
|
|
.fill_txaddr_info = rtw89_pci_fill_txaddr_info_v1,
|
|
.config_intr_mask = rtw89_pci_config_intr_mask_v1,
|
|
.enable_intr = rtw89_pci_enable_intr_v1,
|
|
.disable_intr = rtw89_pci_disable_intr_v1,
|
|
.recognize_intrs = rtw89_pci_recognize_intrs_v1,
|
|
};
|
|
|
|
static const struct dmi_system_id rtw8852c_pci_quirks[] = {
|
|
{
|
|
.ident = "Dell Inc. Vostro 16 5640",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 16 5640"),
|
|
DMI_MATCH(DMI_PRODUCT_SKU, "0CA0"),
|
|
},
|
|
.driver_data = (void *)RTW89_QUIRK_PCI_BER,
|
|
},
|
|
{
|
|
.ident = "Dell Inc. Inspiron 16 5640",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5640"),
|
|
DMI_MATCH(DMI_PRODUCT_SKU, "0C9F"),
|
|
},
|
|
.driver_data = (void *)RTW89_QUIRK_PCI_BER,
|
|
},
|
|
{},
|
|
};
|
|
|
|
static const struct rtw89_driver_info rtw89_8852ce_info = {
|
|
.chip = &rtw8852c_chip_info,
|
|
.quirks = rtw8852c_pci_quirks,
|
|
.bus = {
|
|
.pci = &rtw8852c_pci_info,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id rtw89_8852ce_id_table[] = {
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xc852),
|
|
.driver_data = (kernel_ulong_t)&rtw89_8852ce_info,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, rtw89_8852ce_id_table);
|
|
|
|
static struct pci_driver rtw89_8852ce_driver = {
|
|
.name = "rtw89_8852ce",
|
|
.id_table = rtw89_8852ce_id_table,
|
|
.probe = rtw89_pci_probe,
|
|
.remove = rtw89_pci_remove,
|
|
.driver.pm = &rtw89_pm_ops,
|
|
};
|
|
module_pci_driver(rtw89_8852ce_driver);
|
|
|
|
MODULE_AUTHOR("Realtek Corporation");
|
|
MODULE_DESCRIPTION("Realtek 802.11ax wireless 8852CE driver");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|