82c5b53140
Currently this driver prints this line with what looks like a rogue format specifier when the device is probed: [ 2.840000] eth%d: MVME147 at 0xfffe1800, irq 12, Hardware Address xx:xx:xx:xx:xx:xx Change the printk() for netdev_info() and move it after the registration has completed so it prints out the name of the interface properly. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
199 lines
5.7 KiB
C
199 lines
5.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* mvme147.c : the Linux/mvme147/lance ethernet driver
|
|
*
|
|
* Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
|
|
* Based on the Sun Lance driver and the NetBSD HP Lance driver
|
|
* Uses the generic 7990.c LANCE code.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/pgtable.h>
|
|
/* Used for the temporal inet entries and routing */
|
|
#include <linux/socket.h>
|
|
#include <linux/route.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/mvme147hw.h>
|
|
|
|
/* We have 32K of RAM for the init block and buffers. This places
|
|
* an upper limit on the number of buffers we can use. NetBSD uses 8 Rx
|
|
* buffers and 2 Tx buffers, it takes (8 + 2) * 1544 bytes.
|
|
*/
|
|
#define LANCE_LOG_TX_BUFFERS 1
|
|
#define LANCE_LOG_RX_BUFFERS 3
|
|
|
|
#include "7990.h" /* use generic LANCE code */
|
|
|
|
/* Our private data structure */
|
|
struct m147lance_private {
|
|
struct lance_private lance;
|
|
unsigned long ram;
|
|
};
|
|
|
|
/* function prototypes... This is easy because all the grot is in the
|
|
* generic LANCE support. All we have to support is probing for boards,
|
|
* plus board-specific init, open and close actions.
|
|
* Oh, and we need to tell the generic code how to read and write LANCE registers...
|
|
*/
|
|
static int m147lance_open(struct net_device *dev);
|
|
static int m147lance_close(struct net_device *dev);
|
|
static void m147lance_writerap(struct lance_private *lp, unsigned short value);
|
|
static void m147lance_writerdp(struct lance_private *lp, unsigned short value);
|
|
static unsigned short m147lance_readrdp(struct lance_private *lp);
|
|
|
|
typedef void (*writerap_t)(void *, unsigned short);
|
|
typedef void (*writerdp_t)(void *, unsigned short);
|
|
typedef unsigned short (*readrdp_t)(void *);
|
|
|
|
static const struct net_device_ops lance_netdev_ops = {
|
|
.ndo_open = m147lance_open,
|
|
.ndo_stop = m147lance_close,
|
|
.ndo_start_xmit = lance_start_xmit,
|
|
.ndo_set_rx_mode = lance_set_multicast,
|
|
.ndo_tx_timeout = lance_tx_timeout,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
};
|
|
|
|
/* Initialise the one and only on-board 7990 */
|
|
static struct net_device * __init mvme147lance_probe(void)
|
|
{
|
|
struct net_device *dev;
|
|
static int called;
|
|
static const char name[] = "MVME147 LANCE";
|
|
struct m147lance_private *lp;
|
|
u8 macaddr[ETH_ALEN];
|
|
u_long *addr;
|
|
u_long address;
|
|
int err;
|
|
|
|
if (!MACH_IS_MVME147 || called)
|
|
return ERR_PTR(-ENODEV);
|
|
called++;
|
|
|
|
dev = alloc_etherdev(sizeof(struct m147lance_private));
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/* Fill the dev fields */
|
|
dev->base_addr = (unsigned long)MVME147_LANCE_BASE;
|
|
dev->netdev_ops = &lance_netdev_ops;
|
|
dev->dma = 0;
|
|
|
|
addr = (u_long *)ETHERNET_ADDRESS;
|
|
address = *addr;
|
|
macaddr[0] = 0x08;
|
|
macaddr[1] = 0x00;
|
|
macaddr[2] = 0x3e;
|
|
address = address >> 8;
|
|
macaddr[5] = address&0xff;
|
|
address = address >> 8;
|
|
macaddr[4] = address&0xff;
|
|
address = address >> 8;
|
|
macaddr[3] = address&0xff;
|
|
eth_hw_addr_set(dev, macaddr);
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->ram = __get_dma_pages(GFP_ATOMIC, 3); /* 32K */
|
|
if (!lp->ram) {
|
|
printk("%s: No memory for LANCE buffers\n", dev->name);
|
|
free_netdev(dev);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
lp->lance.name = name;
|
|
lp->lance.base = dev->base_addr;
|
|
lp->lance.init_block = (struct lance_init_block *)(lp->ram); /* CPU addr */
|
|
lp->lance.lance_init_block = (struct lance_init_block *)(lp->ram); /* LANCE addr of same RAM */
|
|
lp->lance.busmaster_regval = LE_C3_BSWP; /* we're bigendian */
|
|
lp->lance.irq = MVME147_LANCE_IRQ;
|
|
lp->lance.writerap = (writerap_t)m147lance_writerap;
|
|
lp->lance.writerdp = (writerdp_t)m147lance_writerdp;
|
|
lp->lance.readrdp = (readrdp_t)m147lance_readrdp;
|
|
lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;
|
|
lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;
|
|
lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;
|
|
lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
free_pages(lp->ram, 3);
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
netdev_info(dev, "MVME147 at 0x%08lx, irq %d, Hardware Address %pM\n",
|
|
dev->base_addr, MVME147_LANCE_IRQ, dev->dev_addr);
|
|
|
|
return dev;
|
|
}
|
|
|
|
static void m147lance_writerap(struct lance_private *lp, unsigned short value)
|
|
{
|
|
out_be16(lp->base + LANCE_RAP, value);
|
|
}
|
|
|
|
static void m147lance_writerdp(struct lance_private *lp, unsigned short value)
|
|
{
|
|
out_be16(lp->base + LANCE_RDP, value);
|
|
}
|
|
|
|
static unsigned short m147lance_readrdp(struct lance_private *lp)
|
|
{
|
|
return in_be16(lp->base + LANCE_RDP);
|
|
}
|
|
|
|
static int m147lance_open(struct net_device *dev)
|
|
{
|
|
int status;
|
|
|
|
status = lance_open(dev); /* call generic lance open code */
|
|
if (status)
|
|
return status;
|
|
/* enable interrupts at board level. */
|
|
m147_pcc->lan_cntrl = 0; /* clear the interrupts (if any) */
|
|
m147_pcc->lan_cntrl = 0x08 | 0x04; /* Enable irq 4 */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int m147lance_close(struct net_device *dev)
|
|
{
|
|
/* disable interrupts at boardlevel */
|
|
m147_pcc->lan_cntrl = 0x0; /* disable interrupts */
|
|
lance_close(dev);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_DESCRIPTION("MVME147 LANCE Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct net_device *dev_mvme147_lance;
|
|
static int __init m147lance_init(void)
|
|
{
|
|
dev_mvme147_lance = mvme147lance_probe();
|
|
return PTR_ERR_OR_ZERO(dev_mvme147_lance);
|
|
}
|
|
module_init(m147lance_init);
|
|
|
|
static void __exit m147lance_exit(void)
|
|
{
|
|
struct m147lance_private *lp = netdev_priv(dev_mvme147_lance);
|
|
unregister_netdev(dev_mvme147_lance);
|
|
free_pages(lp->ram, 3);
|
|
free_netdev(dev_mvme147_lance);
|
|
}
|
|
module_exit(m147lance_exit);
|