426ee5196d
To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last 2 patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now. -----BEGIN PGP SIGNATURE----- iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmVCqKsSHG1jZ3JvZkBr ZXJuZWwub3JnAAoJEM4jHQowkoinEgYQAIpkqRL85DBwems19Uk9A27lkctwZ6Fc HdslQCObQTsbuKVimZFP4IL2beUfUE0cfLZCXlzp+4nRDOf6vyhyf3w19jPQtI0Q YdqwTk9y6G5VjDsb35QK0+UBloY/kZ1H3/LW4uCwjXTuksUGmWW2Qvey35696Scv hDMLADqKQmdpYxLUaNi9QyYbEAjYtOai2ezg3+i7hTG168t1k/Ab2BxIFrPVsCR2 FAiq05L4ugWjNskdsWBjck05JZsx9SK/qcAxpIPoUm4nGiFNHApXE0E0hs3vsnmn WIHIbxCQw8ZlUDlmw4S+0YH3NFFzFbWfmW8k2b0f2qZTJm/rU4KiJfcJVknkAUVF raFox6XDW0AUQ9L/NOUJ9ip5rup57GcFrMYocdJ3PPAvvmHKOb1D1O741p75RRcc 9j7zwfIRrzjPUqzhsQS/GFjdJu3lJNmEBK1AcgrVry6WoItrAzJHKPPDC7TwaNmD eXpjxMl1sYzzHqtVh4hn+xkUYphj/6gTGMV8zdo+/FopFswgeJW9G8kHtlEWKDPk MRIKwACmfetP6f3ngHunBg+BOipbjCANL7JI0nOhVOQoaULxCCPx+IPJ6GfSyiuH AbcjH8DGI7fJbUkBFoF0dsRFZ2gH8ds1PYMbWUJ6x3FtuCuv5iIuvQYoaWU6itm7 6f0KvCogg0fU =Qf50 -----END PGP SIGNATURE----- Merge tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ...
1313 lines
35 KiB
C
1313 lines
35 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* (C) Copyright 2020 Hewlett Packard Enterprise Development LP
|
|
* Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
/*
|
|
* Cross Partition Communication (XPC) support - standard version.
|
|
*
|
|
* XPC provides a message passing capability that crosses partition
|
|
* boundaries. This module is made up of two parts:
|
|
*
|
|
* partition This part detects the presence/absence of other
|
|
* partitions. It provides a heartbeat and monitors
|
|
* the heartbeats of other partitions.
|
|
*
|
|
* channel This part manages the channels and sends/receives
|
|
* messages across them to/from other partitions.
|
|
*
|
|
* There are a couple of additional functions residing in XP, which
|
|
* provide an interface to XPC for its users.
|
|
*
|
|
*
|
|
* Caveats:
|
|
*
|
|
* . Currently on sn2, we have no way to determine which nasid an IRQ
|
|
* came from. Thus, xpc_send_IRQ_sn2() does a remote amo write
|
|
* followed by an IPI. The amo indicates where data is to be pulled
|
|
* from, so after the IPI arrives, the remote partition checks the amo
|
|
* word. The IPI can actually arrive before the amo however, so other
|
|
* code must periodically check for this case. Also, remote amo
|
|
* operations do not reliably time out. Thus we do a remote PIO read
|
|
* solely to know whether the remote partition is down and whether we
|
|
* should stop sending IPIs to it. This remote PIO read operation is
|
|
* set up in a special nofault region so SAL knows to ignore (and
|
|
* cleanup) any errors due to the remote amo write, PIO read, and/or
|
|
* PIO write operations.
|
|
*
|
|
* If/when new hardware solves this IPI problem, we should abandon
|
|
* the current approach.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysctl.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/kdebug.h>
|
|
#include <linux/kthread.h>
|
|
#include "xpc.h"
|
|
|
|
#ifdef CONFIG_X86_64
|
|
#include <asm/traps.h>
|
|
#endif
|
|
|
|
/* define two XPC debug device structures to be used with dev_dbg() et al */
|
|
|
|
static struct device_driver xpc_dbg_name = {
|
|
.name = "xpc"
|
|
};
|
|
|
|
static struct device xpc_part_dbg_subname = {
|
|
.init_name = "", /* set to "part" at xpc_init() time */
|
|
.driver = &xpc_dbg_name
|
|
};
|
|
|
|
static struct device xpc_chan_dbg_subname = {
|
|
.init_name = "", /* set to "chan" at xpc_init() time */
|
|
.driver = &xpc_dbg_name
|
|
};
|
|
|
|
struct device *xpc_part = &xpc_part_dbg_subname;
|
|
struct device *xpc_chan = &xpc_chan_dbg_subname;
|
|
|
|
static int xpc_kdebug_ignore;
|
|
|
|
/* systune related variables for /proc/sys directories */
|
|
|
|
static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
|
|
static int xpc_hb_min_interval = 1;
|
|
static int xpc_hb_max_interval = 10;
|
|
|
|
static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL;
|
|
static int xpc_hb_check_min_interval = 10;
|
|
static int xpc_hb_check_max_interval = 120;
|
|
|
|
int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
|
|
static int xpc_disengage_min_timelimit; /* = 0 */
|
|
static int xpc_disengage_max_timelimit = 120;
|
|
|
|
static struct ctl_table xpc_sys_xpc_hb[] = {
|
|
{
|
|
.procname = "hb_interval",
|
|
.data = &xpc_hb_interval,
|
|
.maxlen = sizeof(int),
|
|
.mode = 0644,
|
|
.proc_handler = proc_dointvec_minmax,
|
|
.extra1 = &xpc_hb_min_interval,
|
|
.extra2 = &xpc_hb_max_interval},
|
|
{
|
|
.procname = "hb_check_interval",
|
|
.data = &xpc_hb_check_interval,
|
|
.maxlen = sizeof(int),
|
|
.mode = 0644,
|
|
.proc_handler = proc_dointvec_minmax,
|
|
.extra1 = &xpc_hb_check_min_interval,
|
|
.extra2 = &xpc_hb_check_max_interval},
|
|
};
|
|
static struct ctl_table xpc_sys_xpc[] = {
|
|
{
|
|
.procname = "disengage_timelimit",
|
|
.data = &xpc_disengage_timelimit,
|
|
.maxlen = sizeof(int),
|
|
.mode = 0644,
|
|
.proc_handler = proc_dointvec_minmax,
|
|
.extra1 = &xpc_disengage_min_timelimit,
|
|
.extra2 = &xpc_disengage_max_timelimit},
|
|
};
|
|
|
|
static struct ctl_table_header *xpc_sysctl;
|
|
static struct ctl_table_header *xpc_sysctl_hb;
|
|
|
|
/* non-zero if any remote partition disengage was timed out */
|
|
int xpc_disengage_timedout;
|
|
|
|
/* #of activate IRQs received and not yet processed */
|
|
int xpc_activate_IRQ_rcvd;
|
|
DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock);
|
|
|
|
/* IRQ handler notifies this wait queue on receipt of an IRQ */
|
|
DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq);
|
|
|
|
static unsigned long xpc_hb_check_timeout;
|
|
static struct timer_list xpc_hb_timer;
|
|
|
|
/* notification that the xpc_hb_checker thread has exited */
|
|
static DECLARE_COMPLETION(xpc_hb_checker_exited);
|
|
|
|
/* notification that the xpc_discovery thread has exited */
|
|
static DECLARE_COMPLETION(xpc_discovery_exited);
|
|
|
|
static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *);
|
|
|
|
static int xpc_system_reboot(struct notifier_block *, unsigned long, void *);
|
|
static struct notifier_block xpc_reboot_notifier = {
|
|
.notifier_call = xpc_system_reboot,
|
|
};
|
|
|
|
static int xpc_system_die(struct notifier_block *, unsigned long, void *);
|
|
static struct notifier_block xpc_die_notifier = {
|
|
.notifier_call = xpc_system_die,
|
|
};
|
|
|
|
struct xpc_arch_operations xpc_arch_ops;
|
|
|
|
/*
|
|
* Timer function to enforce the timelimit on the partition disengage.
|
|
*/
|
|
static void
|
|
xpc_timeout_partition_disengage(struct timer_list *t)
|
|
{
|
|
struct xpc_partition *part = from_timer(part, t, disengage_timer);
|
|
|
|
DBUG_ON(time_is_after_jiffies(part->disengage_timeout));
|
|
|
|
xpc_partition_disengaged_from_timer(part);
|
|
|
|
DBUG_ON(part->disengage_timeout != 0);
|
|
DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
|
|
}
|
|
|
|
/*
|
|
* Timer to produce the heartbeat. The timer structures function is
|
|
* already set when this is initially called. A tunable is used to
|
|
* specify when the next timeout should occur.
|
|
*/
|
|
static void
|
|
xpc_hb_beater(struct timer_list *unused)
|
|
{
|
|
xpc_arch_ops.increment_heartbeat();
|
|
|
|
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
|
|
wake_up_interruptible(&xpc_activate_IRQ_wq);
|
|
|
|
xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ);
|
|
add_timer(&xpc_hb_timer);
|
|
}
|
|
|
|
static void
|
|
xpc_start_hb_beater(void)
|
|
{
|
|
xpc_arch_ops.heartbeat_init();
|
|
timer_setup(&xpc_hb_timer, xpc_hb_beater, 0);
|
|
xpc_hb_beater(NULL);
|
|
}
|
|
|
|
static void
|
|
xpc_stop_hb_beater(void)
|
|
{
|
|
del_timer_sync(&xpc_hb_timer);
|
|
xpc_arch_ops.heartbeat_exit();
|
|
}
|
|
|
|
/*
|
|
* At periodic intervals, scan through all active partitions and ensure
|
|
* their heartbeat is still active. If not, the partition is deactivated.
|
|
*/
|
|
static void
|
|
xpc_check_remote_hb(void)
|
|
{
|
|
struct xpc_partition *part;
|
|
short partid;
|
|
enum xp_retval ret;
|
|
|
|
for (partid = 0; partid < xp_max_npartitions; partid++) {
|
|
|
|
if (xpc_exiting)
|
|
break;
|
|
|
|
if (partid == xp_partition_id)
|
|
continue;
|
|
|
|
part = &xpc_partitions[partid];
|
|
|
|
if (part->act_state == XPC_P_AS_INACTIVE ||
|
|
part->act_state == XPC_P_AS_DEACTIVATING) {
|
|
continue;
|
|
}
|
|
|
|
ret = xpc_arch_ops.get_remote_heartbeat(part);
|
|
if (ret != xpSuccess)
|
|
XPC_DEACTIVATE_PARTITION(part, ret);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This thread is responsible for nearly all of the partition
|
|
* activation/deactivation.
|
|
*/
|
|
static int
|
|
xpc_hb_checker(void *ignore)
|
|
{
|
|
int force_IRQ = 0;
|
|
|
|
/* this thread was marked active by xpc_hb_init() */
|
|
|
|
set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU));
|
|
|
|
/* set our heartbeating to other partitions into motion */
|
|
xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ);
|
|
xpc_start_hb_beater();
|
|
|
|
while (!xpc_exiting) {
|
|
|
|
dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have "
|
|
"been received\n",
|
|
(int)(xpc_hb_check_timeout - jiffies),
|
|
xpc_activate_IRQ_rcvd);
|
|
|
|
/* checking of remote heartbeats is skewed by IRQ handling */
|
|
if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) {
|
|
xpc_hb_check_timeout = jiffies +
|
|
(xpc_hb_check_interval * HZ);
|
|
|
|
dev_dbg(xpc_part, "checking remote heartbeats\n");
|
|
xpc_check_remote_hb();
|
|
}
|
|
|
|
/* check for outstanding IRQs */
|
|
if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) {
|
|
force_IRQ = 0;
|
|
dev_dbg(xpc_part, "processing activate IRQs "
|
|
"received\n");
|
|
xpc_arch_ops.process_activate_IRQ_rcvd();
|
|
}
|
|
|
|
/* wait for IRQ or timeout */
|
|
(void)wait_event_interruptible(xpc_activate_IRQ_wq,
|
|
(time_is_before_eq_jiffies(
|
|
xpc_hb_check_timeout) ||
|
|
xpc_activate_IRQ_rcvd > 0 ||
|
|
xpc_exiting));
|
|
}
|
|
|
|
xpc_stop_hb_beater();
|
|
|
|
dev_dbg(xpc_part, "heartbeat checker is exiting\n");
|
|
|
|
/* mark this thread as having exited */
|
|
complete(&xpc_hb_checker_exited);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This thread will attempt to discover other partitions to activate
|
|
* based on info provided by SAL. This new thread is short lived and
|
|
* will exit once discovery is complete.
|
|
*/
|
|
static int
|
|
xpc_initiate_discovery(void *ignore)
|
|
{
|
|
xpc_discovery();
|
|
|
|
dev_dbg(xpc_part, "discovery thread is exiting\n");
|
|
|
|
/* mark this thread as having exited */
|
|
complete(&xpc_discovery_exited);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The first kthread assigned to a newly activated partition is the one
|
|
* created by XPC HB with which it calls xpc_activating(). XPC hangs on to
|
|
* that kthread until the partition is brought down, at which time that kthread
|
|
* returns back to XPC HB. (The return of that kthread will signify to XPC HB
|
|
* that XPC has dismantled all communication infrastructure for the associated
|
|
* partition.) This kthread becomes the channel manager for that partition.
|
|
*
|
|
* Each active partition has a channel manager, who, besides connecting and
|
|
* disconnecting channels, will ensure that each of the partition's connected
|
|
* channels has the required number of assigned kthreads to get the work done.
|
|
*/
|
|
static void
|
|
xpc_channel_mgr(struct xpc_partition *part)
|
|
{
|
|
while (part->act_state != XPC_P_AS_DEACTIVATING ||
|
|
atomic_read(&part->nchannels_active) > 0 ||
|
|
!xpc_partition_disengaged(part)) {
|
|
|
|
xpc_process_sent_chctl_flags(part);
|
|
|
|
/*
|
|
* Wait until we've been requested to activate kthreads or
|
|
* all of the channel's message queues have been torn down or
|
|
* a signal is pending.
|
|
*
|
|
* The channel_mgr_requests is set to 1 after being awakened,
|
|
* This is done to prevent the channel mgr from making one pass
|
|
* through the loop for each request, since he will
|
|
* be servicing all the requests in one pass. The reason it's
|
|
* set to 1 instead of 0 is so that other kthreads will know
|
|
* that the channel mgr is running and won't bother trying to
|
|
* wake him up.
|
|
*/
|
|
atomic_dec(&part->channel_mgr_requests);
|
|
(void)wait_event_interruptible(part->channel_mgr_wq,
|
|
(atomic_read(&part->channel_mgr_requests) > 0 ||
|
|
part->chctl.all_flags != 0 ||
|
|
(part->act_state == XPC_P_AS_DEACTIVATING &&
|
|
atomic_read(&part->nchannels_active) == 0 &&
|
|
xpc_partition_disengaged(part))));
|
|
atomic_set(&part->channel_mgr_requests, 1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Guarantee that the kzalloc'd memory is cacheline aligned.
|
|
*/
|
|
void *
|
|
xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
|
|
{
|
|
/* see if kzalloc will give us cachline aligned memory by default */
|
|
*base = kzalloc(size, flags);
|
|
if (*base == NULL)
|
|
return NULL;
|
|
|
|
if ((u64)*base == L1_CACHE_ALIGN((u64)*base))
|
|
return *base;
|
|
|
|
kfree(*base);
|
|
|
|
/* nope, we'll have to do it ourselves */
|
|
*base = kzalloc(size + L1_CACHE_BYTES, flags);
|
|
if (*base == NULL)
|
|
return NULL;
|
|
|
|
return (void *)L1_CACHE_ALIGN((u64)*base);
|
|
}
|
|
|
|
/*
|
|
* Setup the channel structures necessary to support XPartition Communication
|
|
* between the specified remote partition and the local one.
|
|
*/
|
|
static enum xp_retval
|
|
xpc_setup_ch_structures(struct xpc_partition *part)
|
|
{
|
|
enum xp_retval ret;
|
|
int ch_number;
|
|
struct xpc_channel *ch;
|
|
short partid = XPC_PARTID(part);
|
|
|
|
/*
|
|
* Allocate all of the channel structures as a contiguous chunk of
|
|
* memory.
|
|
*/
|
|
DBUG_ON(part->channels != NULL);
|
|
part->channels = kcalloc(XPC_MAX_NCHANNELS,
|
|
sizeof(struct xpc_channel),
|
|
GFP_KERNEL);
|
|
if (part->channels == NULL) {
|
|
dev_err(xpc_chan, "can't get memory for channels\n");
|
|
return xpNoMemory;
|
|
}
|
|
|
|
/* allocate the remote open and close args */
|
|
|
|
part->remote_openclose_args =
|
|
xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE,
|
|
GFP_KERNEL, &part->
|
|
remote_openclose_args_base);
|
|
if (part->remote_openclose_args == NULL) {
|
|
dev_err(xpc_chan, "can't get memory for remote connect args\n");
|
|
ret = xpNoMemory;
|
|
goto out_1;
|
|
}
|
|
|
|
part->chctl.all_flags = 0;
|
|
spin_lock_init(&part->chctl_lock);
|
|
|
|
atomic_set(&part->channel_mgr_requests, 1);
|
|
init_waitqueue_head(&part->channel_mgr_wq);
|
|
|
|
part->nchannels = XPC_MAX_NCHANNELS;
|
|
|
|
atomic_set(&part->nchannels_active, 0);
|
|
atomic_set(&part->nchannels_engaged, 0);
|
|
|
|
for (ch_number = 0; ch_number < part->nchannels; ch_number++) {
|
|
ch = &part->channels[ch_number];
|
|
|
|
ch->partid = partid;
|
|
ch->number = ch_number;
|
|
ch->flags = XPC_C_DISCONNECTED;
|
|
|
|
atomic_set(&ch->kthreads_assigned, 0);
|
|
atomic_set(&ch->kthreads_idle, 0);
|
|
atomic_set(&ch->kthreads_active, 0);
|
|
|
|
atomic_set(&ch->references, 0);
|
|
atomic_set(&ch->n_to_notify, 0);
|
|
|
|
spin_lock_init(&ch->lock);
|
|
init_completion(&ch->wdisconnect_wait);
|
|
|
|
atomic_set(&ch->n_on_msg_allocate_wq, 0);
|
|
init_waitqueue_head(&ch->msg_allocate_wq);
|
|
init_waitqueue_head(&ch->idle_wq);
|
|
}
|
|
|
|
ret = xpc_arch_ops.setup_ch_structures(part);
|
|
if (ret != xpSuccess)
|
|
goto out_2;
|
|
|
|
/*
|
|
* With the setting of the partition setup_state to XPC_P_SS_SETUP,
|
|
* we're declaring that this partition is ready to go.
|
|
*/
|
|
part->setup_state = XPC_P_SS_SETUP;
|
|
|
|
return xpSuccess;
|
|
|
|
/* setup of ch structures failed */
|
|
out_2:
|
|
kfree(part->remote_openclose_args_base);
|
|
part->remote_openclose_args = NULL;
|
|
out_1:
|
|
kfree(part->channels);
|
|
part->channels = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Teardown the channel structures necessary to support XPartition Communication
|
|
* between the specified remote partition and the local one.
|
|
*/
|
|
static void
|
|
xpc_teardown_ch_structures(struct xpc_partition *part)
|
|
{
|
|
DBUG_ON(atomic_read(&part->nchannels_engaged) != 0);
|
|
DBUG_ON(atomic_read(&part->nchannels_active) != 0);
|
|
|
|
/*
|
|
* Make this partition inaccessible to local processes by marking it
|
|
* as no longer setup. Then wait before proceeding with the teardown
|
|
* until all existing references cease.
|
|
*/
|
|
DBUG_ON(part->setup_state != XPC_P_SS_SETUP);
|
|
part->setup_state = XPC_P_SS_WTEARDOWN;
|
|
|
|
wait_event(part->teardown_wq, (atomic_read(&part->references) == 0));
|
|
|
|
/* now we can begin tearing down the infrastructure */
|
|
|
|
xpc_arch_ops.teardown_ch_structures(part);
|
|
|
|
kfree(part->remote_openclose_args_base);
|
|
part->remote_openclose_args = NULL;
|
|
kfree(part->channels);
|
|
part->channels = NULL;
|
|
|
|
part->setup_state = XPC_P_SS_TORNDOWN;
|
|
}
|
|
|
|
/*
|
|
* When XPC HB determines that a partition has come up, it will create a new
|
|
* kthread and that kthread will call this function to attempt to set up the
|
|
* basic infrastructure used for Cross Partition Communication with the newly
|
|
* upped partition.
|
|
*
|
|
* The kthread that was created by XPC HB and which setup the XPC
|
|
* infrastructure will remain assigned to the partition becoming the channel
|
|
* manager for that partition until the partition is deactivating, at which
|
|
* time the kthread will teardown the XPC infrastructure and then exit.
|
|
*/
|
|
static int
|
|
xpc_activating(void *__partid)
|
|
{
|
|
short partid = (u64)__partid;
|
|
struct xpc_partition *part = &xpc_partitions[partid];
|
|
unsigned long irq_flags;
|
|
|
|
DBUG_ON(partid < 0 || partid >= xp_max_npartitions);
|
|
|
|
spin_lock_irqsave(&part->act_lock, irq_flags);
|
|
|
|
if (part->act_state == XPC_P_AS_DEACTIVATING) {
|
|
part->act_state = XPC_P_AS_INACTIVE;
|
|
spin_unlock_irqrestore(&part->act_lock, irq_flags);
|
|
part->remote_rp_pa = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* indicate the thread is activating */
|
|
DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ);
|
|
part->act_state = XPC_P_AS_ACTIVATING;
|
|
|
|
XPC_SET_REASON(part, 0, 0);
|
|
spin_unlock_irqrestore(&part->act_lock, irq_flags);
|
|
|
|
dev_dbg(xpc_part, "activating partition %d\n", partid);
|
|
|
|
xpc_arch_ops.allow_hb(partid);
|
|
|
|
if (xpc_setup_ch_structures(part) == xpSuccess) {
|
|
(void)xpc_part_ref(part); /* this will always succeed */
|
|
|
|
if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
|
|
xpc_mark_partition_active(part);
|
|
xpc_channel_mgr(part);
|
|
/* won't return until partition is deactivating */
|
|
}
|
|
|
|
xpc_part_deref(part);
|
|
xpc_teardown_ch_structures(part);
|
|
}
|
|
|
|
xpc_arch_ops.disallow_hb(partid);
|
|
xpc_mark_partition_inactive(part);
|
|
|
|
if (part->reason == xpReactivating) {
|
|
/* interrupting ourselves results in activating partition */
|
|
xpc_arch_ops.request_partition_reactivation(part);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
xpc_activate_partition(struct xpc_partition *part)
|
|
{
|
|
short partid = XPC_PARTID(part);
|
|
unsigned long irq_flags;
|
|
struct task_struct *kthread;
|
|
|
|
spin_lock_irqsave(&part->act_lock, irq_flags);
|
|
|
|
DBUG_ON(part->act_state != XPC_P_AS_INACTIVE);
|
|
|
|
part->act_state = XPC_P_AS_ACTIVATION_REQ;
|
|
XPC_SET_REASON(part, xpCloneKThread, __LINE__);
|
|
|
|
spin_unlock_irqrestore(&part->act_lock, irq_flags);
|
|
|
|
kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d",
|
|
partid);
|
|
if (IS_ERR(kthread)) {
|
|
spin_lock_irqsave(&part->act_lock, irq_flags);
|
|
part->act_state = XPC_P_AS_INACTIVE;
|
|
XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
|
|
spin_unlock_irqrestore(&part->act_lock, irq_flags);
|
|
}
|
|
}
|
|
|
|
void
|
|
xpc_activate_kthreads(struct xpc_channel *ch, int needed)
|
|
{
|
|
int idle = atomic_read(&ch->kthreads_idle);
|
|
int assigned = atomic_read(&ch->kthreads_assigned);
|
|
int wakeup;
|
|
|
|
DBUG_ON(needed <= 0);
|
|
|
|
if (idle > 0) {
|
|
wakeup = (needed > idle) ? idle : needed;
|
|
needed -= wakeup;
|
|
|
|
dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, "
|
|
"channel=%d\n", wakeup, ch->partid, ch->number);
|
|
|
|
/* only wakeup the requested number of kthreads */
|
|
wake_up_nr(&ch->idle_wq, wakeup);
|
|
}
|
|
|
|
if (needed <= 0)
|
|
return;
|
|
|
|
if (needed + assigned > ch->kthreads_assigned_limit) {
|
|
needed = ch->kthreads_assigned_limit - assigned;
|
|
if (needed <= 0)
|
|
return;
|
|
}
|
|
|
|
dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n",
|
|
needed, ch->partid, ch->number);
|
|
|
|
xpc_create_kthreads(ch, needed, 0);
|
|
}
|
|
|
|
/*
|
|
* This function is where XPC's kthreads wait for messages to deliver.
|
|
*/
|
|
static void
|
|
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
|
|
{
|
|
int (*n_of_deliverable_payloads) (struct xpc_channel *) =
|
|
xpc_arch_ops.n_of_deliverable_payloads;
|
|
|
|
do {
|
|
/* deliver messages to their intended recipients */
|
|
|
|
while (n_of_deliverable_payloads(ch) > 0 &&
|
|
!(ch->flags & XPC_C_DISCONNECTING)) {
|
|
xpc_deliver_payload(ch);
|
|
}
|
|
|
|
if (atomic_inc_return(&ch->kthreads_idle) >
|
|
ch->kthreads_idle_limit) {
|
|
/* too many idle kthreads on this channel */
|
|
atomic_dec(&ch->kthreads_idle);
|
|
break;
|
|
}
|
|
|
|
dev_dbg(xpc_chan, "idle kthread calling "
|
|
"wait_event_interruptible_exclusive()\n");
|
|
|
|
(void)wait_event_interruptible_exclusive(ch->idle_wq,
|
|
(n_of_deliverable_payloads(ch) > 0 ||
|
|
(ch->flags & XPC_C_DISCONNECTING)));
|
|
|
|
atomic_dec(&ch->kthreads_idle);
|
|
|
|
} while (!(ch->flags & XPC_C_DISCONNECTING));
|
|
}
|
|
|
|
static int
|
|
xpc_kthread_start(void *args)
|
|
{
|
|
short partid = XPC_UNPACK_ARG1(args);
|
|
u16 ch_number = XPC_UNPACK_ARG2(args);
|
|
struct xpc_partition *part = &xpc_partitions[partid];
|
|
struct xpc_channel *ch;
|
|
int n_needed;
|
|
unsigned long irq_flags;
|
|
int (*n_of_deliverable_payloads) (struct xpc_channel *) =
|
|
xpc_arch_ops.n_of_deliverable_payloads;
|
|
|
|
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
|
|
partid, ch_number);
|
|
|
|
ch = &part->channels[ch_number];
|
|
|
|
if (!(ch->flags & XPC_C_DISCONNECTING)) {
|
|
|
|
/* let registerer know that connection has been established */
|
|
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) {
|
|
ch->flags |= XPC_C_CONNECTEDCALLOUT;
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
|
|
xpc_connected_callout(ch);
|
|
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE;
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
|
|
/*
|
|
* It is possible that while the callout was being
|
|
* made that the remote partition sent some messages.
|
|
* If that is the case, we may need to activate
|
|
* additional kthreads to help deliver them. We only
|
|
* need one less than total #of messages to deliver.
|
|
*/
|
|
n_needed = n_of_deliverable_payloads(ch) - 1;
|
|
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
|
|
xpc_activate_kthreads(ch, n_needed);
|
|
|
|
} else {
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
}
|
|
|
|
xpc_kthread_waitmsgs(part, ch);
|
|
}
|
|
|
|
/* let registerer know that connection is disconnecting */
|
|
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
|
|
!(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
|
|
ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
|
|
xpc_disconnect_callout(ch, xpDisconnecting);
|
|
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
|
|
}
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
|
|
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
|
|
atomic_dec_return(&part->nchannels_engaged) == 0) {
|
|
xpc_arch_ops.indicate_partition_disengaged(part);
|
|
}
|
|
|
|
xpc_msgqueue_deref(ch);
|
|
|
|
dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n",
|
|
partid, ch_number);
|
|
|
|
xpc_part_deref(part);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For each partition that XPC has established communications with, there is
|
|
* a minimum of one kernel thread assigned to perform any operation that
|
|
* may potentially sleep or block (basically the callouts to the asynchronous
|
|
* functions registered via xpc_connect()).
|
|
*
|
|
* Additional kthreads are created and destroyed by XPC as the workload
|
|
* demands.
|
|
*
|
|
* A kthread is assigned to one of the active channels that exists for a given
|
|
* partition.
|
|
*/
|
|
void
|
|
xpc_create_kthreads(struct xpc_channel *ch, int needed,
|
|
int ignore_disconnecting)
|
|
{
|
|
unsigned long irq_flags;
|
|
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
|
|
struct xpc_partition *part = &xpc_partitions[ch->partid];
|
|
struct task_struct *kthread;
|
|
void (*indicate_partition_disengaged) (struct xpc_partition *) =
|
|
xpc_arch_ops.indicate_partition_disengaged;
|
|
|
|
while (needed-- > 0) {
|
|
|
|
/*
|
|
* The following is done on behalf of the newly created
|
|
* kthread. That kthread is responsible for doing the
|
|
* counterpart to the following before it exits.
|
|
*/
|
|
if (ignore_disconnecting) {
|
|
if (!atomic_inc_not_zero(&ch->kthreads_assigned)) {
|
|
/* kthreads assigned had gone to zero */
|
|
BUG_ON(!(ch->flags &
|
|
XPC_C_DISCONNECTINGCALLOUT_MADE));
|
|
break;
|
|
}
|
|
|
|
} else if (ch->flags & XPC_C_DISCONNECTING) {
|
|
break;
|
|
|
|
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
|
|
atomic_inc_return(&part->nchannels_engaged) == 1) {
|
|
xpc_arch_ops.indicate_partition_engaged(part);
|
|
}
|
|
(void)xpc_part_ref(part);
|
|
xpc_msgqueue_ref(ch);
|
|
|
|
kthread = kthread_run(xpc_kthread_start, (void *)args,
|
|
"xpc%02dc%d", ch->partid, ch->number);
|
|
if (IS_ERR(kthread)) {
|
|
/* the fork failed */
|
|
|
|
/*
|
|
* NOTE: if (ignore_disconnecting &&
|
|
* !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true,
|
|
* then we'll deadlock if all other kthreads assigned
|
|
* to this channel are blocked in the channel's
|
|
* registerer, because the only thing that will unblock
|
|
* them is the xpDisconnecting callout that this
|
|
* failed kthread_run() would have made.
|
|
*/
|
|
|
|
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
|
|
atomic_dec_return(&part->nchannels_engaged) == 0) {
|
|
indicate_partition_disengaged(part);
|
|
}
|
|
xpc_msgqueue_deref(ch);
|
|
xpc_part_deref(part);
|
|
|
|
if (atomic_read(&ch->kthreads_assigned) <
|
|
ch->kthreads_idle_limit) {
|
|
/*
|
|
* Flag this as an error only if we have an
|
|
* insufficient #of kthreads for the channel
|
|
* to function.
|
|
*/
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
|
|
&irq_flags);
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
xpc_disconnect_wait(int ch_number)
|
|
{
|
|
unsigned long irq_flags;
|
|
short partid;
|
|
struct xpc_partition *part;
|
|
struct xpc_channel *ch;
|
|
int wakeup_channel_mgr;
|
|
|
|
/* now wait for all callouts to the caller's function to cease */
|
|
for (partid = 0; partid < xp_max_npartitions; partid++) {
|
|
part = &xpc_partitions[partid];
|
|
|
|
if (!xpc_part_ref(part))
|
|
continue;
|
|
|
|
ch = &part->channels[ch_number];
|
|
|
|
if (!(ch->flags & XPC_C_WDISCONNECT)) {
|
|
xpc_part_deref(part);
|
|
continue;
|
|
}
|
|
|
|
wait_for_completion(&ch->wdisconnect_wait);
|
|
|
|
spin_lock_irqsave(&ch->lock, irq_flags);
|
|
DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED));
|
|
wakeup_channel_mgr = 0;
|
|
|
|
if (ch->delayed_chctl_flags) {
|
|
if (part->act_state != XPC_P_AS_DEACTIVATING) {
|
|
spin_lock(&part->chctl_lock);
|
|
part->chctl.flags[ch->number] |=
|
|
ch->delayed_chctl_flags;
|
|
spin_unlock(&part->chctl_lock);
|
|
wakeup_channel_mgr = 1;
|
|
}
|
|
ch->delayed_chctl_flags = 0;
|
|
}
|
|
|
|
ch->flags &= ~XPC_C_WDISCONNECT;
|
|
spin_unlock_irqrestore(&ch->lock, irq_flags);
|
|
|
|
if (wakeup_channel_mgr)
|
|
xpc_wakeup_channel_mgr(part);
|
|
|
|
xpc_part_deref(part);
|
|
}
|
|
}
|
|
|
|
static int
|
|
xpc_setup_partitions(void)
|
|
{
|
|
short partid;
|
|
struct xpc_partition *part;
|
|
|
|
xpc_partitions = kcalloc(xp_max_npartitions,
|
|
sizeof(struct xpc_partition),
|
|
GFP_KERNEL);
|
|
if (xpc_partitions == NULL) {
|
|
dev_err(xpc_part, "can't get memory for partition structure\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/*
|
|
* The first few fields of each entry of xpc_partitions[] need to
|
|
* be initialized now so that calls to xpc_connect() and
|
|
* xpc_disconnect() can be made prior to the activation of any remote
|
|
* partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE
|
|
* ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING
|
|
* PARTITION HAS BEEN ACTIVATED.
|
|
*/
|
|
for (partid = 0; partid < xp_max_npartitions; partid++) {
|
|
part = &xpc_partitions[partid];
|
|
|
|
DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part));
|
|
|
|
part->activate_IRQ_rcvd = 0;
|
|
spin_lock_init(&part->act_lock);
|
|
part->act_state = XPC_P_AS_INACTIVE;
|
|
XPC_SET_REASON(part, 0, 0);
|
|
|
|
timer_setup(&part->disengage_timer,
|
|
xpc_timeout_partition_disengage, 0);
|
|
|
|
part->setup_state = XPC_P_SS_UNSET;
|
|
init_waitqueue_head(&part->teardown_wq);
|
|
atomic_set(&part->references, 0);
|
|
}
|
|
|
|
return xpc_arch_ops.setup_partitions();
|
|
}
|
|
|
|
static void
|
|
xpc_teardown_partitions(void)
|
|
{
|
|
xpc_arch_ops.teardown_partitions();
|
|
kfree(xpc_partitions);
|
|
}
|
|
|
|
static void
|
|
xpc_do_exit(enum xp_retval reason)
|
|
{
|
|
short partid;
|
|
int active_part_count, printed_waiting_msg = 0;
|
|
struct xpc_partition *part;
|
|
unsigned long printmsg_time, disengage_timeout = 0;
|
|
|
|
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
|
|
DBUG_ON(xpc_exiting == 1);
|
|
|
|
/*
|
|
* Let the heartbeat checker thread and the discovery thread
|
|
* (if one is running) know that they should exit. Also wake up
|
|
* the heartbeat checker thread in case it's sleeping.
|
|
*/
|
|
xpc_exiting = 1;
|
|
wake_up_interruptible(&xpc_activate_IRQ_wq);
|
|
|
|
/* wait for the discovery thread to exit */
|
|
wait_for_completion(&xpc_discovery_exited);
|
|
|
|
/* wait for the heartbeat checker thread to exit */
|
|
wait_for_completion(&xpc_hb_checker_exited);
|
|
|
|
/* sleep for a 1/3 of a second or so */
|
|
(void)msleep_interruptible(300);
|
|
|
|
/* wait for all partitions to become inactive */
|
|
|
|
printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
|
|
xpc_disengage_timedout = 0;
|
|
|
|
do {
|
|
active_part_count = 0;
|
|
|
|
for (partid = 0; partid < xp_max_npartitions; partid++) {
|
|
part = &xpc_partitions[partid];
|
|
|
|
if (xpc_partition_disengaged(part) &&
|
|
part->act_state == XPC_P_AS_INACTIVE) {
|
|
continue;
|
|
}
|
|
|
|
active_part_count++;
|
|
|
|
XPC_DEACTIVATE_PARTITION(part, reason);
|
|
|
|
if (part->disengage_timeout > disengage_timeout)
|
|
disengage_timeout = part->disengage_timeout;
|
|
}
|
|
|
|
if (xpc_arch_ops.any_partition_engaged()) {
|
|
if (time_is_before_jiffies(printmsg_time)) {
|
|
dev_info(xpc_part, "waiting for remote "
|
|
"partitions to deactivate, timeout in "
|
|
"%ld seconds\n", (disengage_timeout -
|
|
jiffies) / HZ);
|
|
printmsg_time = jiffies +
|
|
(XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ);
|
|
printed_waiting_msg = 1;
|
|
}
|
|
|
|
} else if (active_part_count > 0) {
|
|
if (printed_waiting_msg) {
|
|
dev_info(xpc_part, "waiting for local partition"
|
|
" to deactivate\n");
|
|
printed_waiting_msg = 0;
|
|
}
|
|
|
|
} else {
|
|
if (!xpc_disengage_timedout) {
|
|
dev_info(xpc_part, "all partitions have "
|
|
"deactivated\n");
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* sleep for a 1/3 of a second or so */
|
|
(void)msleep_interruptible(300);
|
|
|
|
} while (1);
|
|
|
|
DBUG_ON(xpc_arch_ops.any_partition_engaged());
|
|
|
|
xpc_teardown_rsvd_page();
|
|
|
|
if (reason == xpUnloading) {
|
|
(void)unregister_die_notifier(&xpc_die_notifier);
|
|
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
|
|
}
|
|
|
|
/* clear the interface to XPC's functions */
|
|
xpc_clear_interface();
|
|
|
|
if (xpc_sysctl)
|
|
unregister_sysctl_table(xpc_sysctl);
|
|
if (xpc_sysctl_hb)
|
|
unregister_sysctl_table(xpc_sysctl_hb);
|
|
|
|
xpc_teardown_partitions();
|
|
|
|
if (is_uv_system())
|
|
xpc_exit_uv();
|
|
}
|
|
|
|
/*
|
|
* This function is called when the system is being rebooted.
|
|
*/
|
|
static int
|
|
xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
|
|
{
|
|
enum xp_retval reason;
|
|
|
|
switch (event) {
|
|
case SYS_RESTART:
|
|
reason = xpSystemReboot;
|
|
break;
|
|
case SYS_HALT:
|
|
reason = xpSystemHalt;
|
|
break;
|
|
case SYS_POWER_OFF:
|
|
reason = xpSystemPoweroff;
|
|
break;
|
|
default:
|
|
reason = xpSystemGoingDown;
|
|
}
|
|
|
|
xpc_do_exit(reason);
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/* Used to only allow one cpu to complete disconnect */
|
|
static unsigned int xpc_die_disconnecting;
|
|
|
|
/*
|
|
* Notify other partitions to deactivate from us by first disengaging from all
|
|
* references to our memory.
|
|
*/
|
|
static void
|
|
xpc_die_deactivate(void)
|
|
{
|
|
struct xpc_partition *part;
|
|
short partid;
|
|
int any_engaged;
|
|
long keep_waiting;
|
|
long wait_to_print;
|
|
|
|
if (cmpxchg(&xpc_die_disconnecting, 0, 1))
|
|
return;
|
|
|
|
/* keep xpc_hb_checker thread from doing anything (just in case) */
|
|
xpc_exiting = 1;
|
|
|
|
xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
|
|
|
|
for (partid = 0; partid < xp_max_npartitions; partid++) {
|
|
part = &xpc_partitions[partid];
|
|
|
|
if (xpc_arch_ops.partition_engaged(partid) ||
|
|
part->act_state != XPC_P_AS_INACTIVE) {
|
|
xpc_arch_ops.request_partition_deactivation(part);
|
|
xpc_arch_ops.indicate_partition_disengaged(part);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Though we requested that all other partitions deactivate from us,
|
|
* we only wait until they've all disengaged or we've reached the
|
|
* defined timelimit.
|
|
*
|
|
* Given that one iteration through the following while-loop takes
|
|
* approximately 200 microseconds, calculate the #of loops to take
|
|
* before bailing and the #of loops before printing a waiting message.
|
|
*/
|
|
keep_waiting = xpc_disengage_timelimit * 1000 * 5;
|
|
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
|
|
|
|
while (1) {
|
|
any_engaged = xpc_arch_ops.any_partition_engaged();
|
|
if (!any_engaged) {
|
|
dev_info(xpc_part, "all partitions have deactivated\n");
|
|
break;
|
|
}
|
|
|
|
if (!keep_waiting--) {
|
|
for (partid = 0; partid < xp_max_npartitions;
|
|
partid++) {
|
|
if (xpc_arch_ops.partition_engaged(partid)) {
|
|
dev_info(xpc_part, "deactivate from "
|
|
"remote partition %d timed "
|
|
"out\n", partid);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (!wait_to_print--) {
|
|
dev_info(xpc_part, "waiting for remote partitions to "
|
|
"deactivate, timeout in %ld seconds\n",
|
|
keep_waiting / (1000 * 5));
|
|
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL *
|
|
1000 * 5;
|
|
}
|
|
|
|
udelay(200);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This function is called when the system is being restarted or halted due
|
|
* to some sort of system failure. If this is the case we need to notify the
|
|
* other partitions to disengage from all references to our memory.
|
|
* This function can also be called when our heartbeater could be offlined
|
|
* for a time. In this case we need to notify other partitions to not worry
|
|
* about the lack of a heartbeat.
|
|
*/
|
|
static int
|
|
xpc_system_die(struct notifier_block *nb, unsigned long event, void *_die_args)
|
|
{
|
|
struct die_args *die_args = _die_args;
|
|
|
|
switch (event) {
|
|
case DIE_TRAP:
|
|
if (die_args->trapnr == X86_TRAP_DF)
|
|
xpc_die_deactivate();
|
|
|
|
if (((die_args->trapnr == X86_TRAP_MF) ||
|
|
(die_args->trapnr == X86_TRAP_XF)) &&
|
|
!user_mode(die_args->regs))
|
|
xpc_die_deactivate();
|
|
|
|
break;
|
|
case DIE_INT3:
|
|
case DIE_DEBUG:
|
|
break;
|
|
case DIE_OOPS:
|
|
case DIE_GPF:
|
|
default:
|
|
xpc_die_deactivate();
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int __init
|
|
xpc_init(void)
|
|
{
|
|
int ret;
|
|
struct task_struct *kthread;
|
|
|
|
dev_set_name(xpc_part, "part");
|
|
dev_set_name(xpc_chan, "chan");
|
|
|
|
if (is_uv_system()) {
|
|
ret = xpc_init_uv();
|
|
|
|
} else {
|
|
ret = -ENODEV;
|
|
}
|
|
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = xpc_setup_partitions();
|
|
if (ret != 0) {
|
|
dev_err(xpc_part, "can't get memory for partition structure\n");
|
|
goto out_1;
|
|
}
|
|
|
|
xpc_sysctl = register_sysctl("xpc", xpc_sys_xpc);
|
|
xpc_sysctl_hb = register_sysctl("xpc/hb", xpc_sys_xpc_hb);
|
|
|
|
/*
|
|
* Fill the partition reserved page with the information needed by
|
|
* other partitions to discover we are alive and establish initial
|
|
* communications.
|
|
*/
|
|
ret = xpc_setup_rsvd_page();
|
|
if (ret != 0) {
|
|
dev_err(xpc_part, "can't setup our reserved page\n");
|
|
goto out_2;
|
|
}
|
|
|
|
/* add ourselves to the reboot_notifier_list */
|
|
ret = register_reboot_notifier(&xpc_reboot_notifier);
|
|
if (ret != 0)
|
|
dev_warn(xpc_part, "can't register reboot notifier\n");
|
|
|
|
/* add ourselves to the die_notifier list */
|
|
ret = register_die_notifier(&xpc_die_notifier);
|
|
if (ret != 0)
|
|
dev_warn(xpc_part, "can't register die notifier\n");
|
|
|
|
/*
|
|
* The real work-horse behind xpc. This processes incoming
|
|
* interrupts and monitors remote heartbeats.
|
|
*/
|
|
kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME);
|
|
if (IS_ERR(kthread)) {
|
|
dev_err(xpc_part, "failed while forking hb check thread\n");
|
|
ret = -EBUSY;
|
|
goto out_3;
|
|
}
|
|
|
|
/*
|
|
* Startup a thread that will attempt to discover other partitions to
|
|
* activate based on info provided by SAL. This new thread is short
|
|
* lived and will exit once discovery is complete.
|
|
*/
|
|
kthread = kthread_run(xpc_initiate_discovery, NULL,
|
|
XPC_DISCOVERY_THREAD_NAME);
|
|
if (IS_ERR(kthread)) {
|
|
dev_err(xpc_part, "failed while forking discovery thread\n");
|
|
|
|
/* mark this new thread as a non-starter */
|
|
complete(&xpc_discovery_exited);
|
|
|
|
xpc_do_exit(xpUnloading);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* set the interface to point at XPC's functions */
|
|
xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect,
|
|
xpc_initiate_send, xpc_initiate_send_notify,
|
|
xpc_initiate_received, xpc_initiate_partid_to_nasids);
|
|
|
|
return 0;
|
|
|
|
/* initialization was not successful */
|
|
out_3:
|
|
xpc_teardown_rsvd_page();
|
|
|
|
(void)unregister_die_notifier(&xpc_die_notifier);
|
|
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
|
|
out_2:
|
|
if (xpc_sysctl_hb)
|
|
unregister_sysctl_table(xpc_sysctl_hb);
|
|
if (xpc_sysctl)
|
|
unregister_sysctl_table(xpc_sysctl);
|
|
|
|
xpc_teardown_partitions();
|
|
out_1:
|
|
if (is_uv_system())
|
|
xpc_exit_uv();
|
|
return ret;
|
|
}
|
|
|
|
module_init(xpc_init);
|
|
|
|
static void __exit
|
|
xpc_exit(void)
|
|
{
|
|
xpc_do_exit(xpUnloading);
|
|
}
|
|
|
|
module_exit(xpc_exit);
|
|
|
|
MODULE_AUTHOR("Silicon Graphics, Inc.");
|
|
MODULE_DESCRIPTION("Cross Partition Communication (XPC) support");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(xpc_hb_interval, int, 0);
|
|
MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between "
|
|
"heartbeat increments.");
|
|
|
|
module_param(xpc_hb_check_interval, int, 0);
|
|
MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between "
|
|
"heartbeat checks.");
|
|
|
|
module_param(xpc_disengage_timelimit, int, 0);
|
|
MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait "
|
|
"for disengage to complete.");
|
|
|
|
module_param(xpc_kdebug_ignore, int, 0);
|
|
MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
|
|
"other partitions when dropping into kdebug.");
|