1
linux/drivers/misc/sgi-xp/xp.h
Ard Biesheuvel cf8e865810 arch: Remove Itanium (IA-64) architecture
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-09-11 08:13:17 +00:00

342 lines
12 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* (C) Copyright 2020 Hewlett Packard Enterprise Development LP
* Copyright (C) 2004-2008 Silicon Graphics, Inc. All rights reserved.
*/
/*
* External Cross Partition (XP) structures and defines.
*/
#ifndef _DRIVERS_MISC_SGIXP_XP_H
#define _DRIVERS_MISC_SGIXP_XP_H
#include <linux/mutex.h>
#if defined CONFIG_X86_UV
#include <asm/uv/uv.h>
#endif
#ifdef USE_DBUG_ON
#define DBUG_ON(condition) BUG_ON(condition)
#else
#define DBUG_ON(condition)
#endif
/*
* Define the maximum number of partitions the system can possibly support.
* It is based on the maximum number of hardware partitionable regions. The
* term 'region' in this context refers to the minimum number of nodes that
* can comprise an access protection grouping. The access protection is in
* regards to memory, IPI and IOI.
*
* The maximum number of hardware partitionable regions is equal to the
* maximum number of nodes in the entire system divided by the minimum number
* of nodes that comprise an access protection grouping.
*/
#define XP_MAX_NPARTITIONS_SN2 64
#define XP_MAX_NPARTITIONS_UV 256
/*
* XPC establishes channel connections between the local partition and any
* other partition that is currently up. Over these channels, kernel-level
* `users' can communicate with their counterparts on the other partitions.
*
* If the need for additional channels arises, one can simply increase
* XPC_MAX_NCHANNELS accordingly. If the day should come where that number
* exceeds the absolute MAXIMUM number of channels possible (eight), then one
* will need to make changes to the XPC code to accommodate for this.
*
* The absolute maximum number of channels possible is limited to eight for
* performance reasons on sn2 hardware. The internal cross partition structures
* require sixteen bytes per channel, and eight allows all of this
* interface-shared info to fit in one 128-byte cacheline.
*/
#define XPC_MEM_CHANNEL 0 /* memory channel number */
#define XPC_NET_CHANNEL 1 /* network channel number */
#define XPC_MAX_NCHANNELS 2 /* max #of channels allowed */
#if XPC_MAX_NCHANNELS > 8
#error XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible.
#endif
/*
* Define macro, XPC_MSG_SIZE(), is provided for the user
* that wants to fit as many msg entries as possible in a given memory size
* (e.g. a memory page).
*/
#define XPC_MSG_MAX_SIZE 128
#define XPC_MSG_HDR_MAX_SIZE 16
#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE)
#define XPC_MSG_SIZE(_payload_size) \
ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \
is_uv_system() ? 64 : 128)
/*
* Define the return values and values passed to user's callout functions.
* (It is important to add new value codes at the end just preceding
* xpUnknownReason, which must have the highest numerical value.)
*/
enum xp_retval {
xpSuccess = 0,
xpNotConnected, /* 1: channel is not connected */
xpConnected, /* 2: channel connected (opened) */
xpRETIRED1, /* 3: (formerly xpDisconnected) */
xpMsgReceived, /* 4: message received */
xpMsgDelivered, /* 5: message delivered and acknowledged */
xpRETIRED2, /* 6: (formerly xpTransferFailed) */
xpNoWait, /* 7: operation would require wait */
xpRetry, /* 8: retry operation */
xpTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
xpInterrupted, /* 10: interrupted wait */
xpUnequalMsgSizes, /* 11: message size disparity between sides */
xpInvalidAddress, /* 12: invalid address */
xpNoMemory, /* 13: no memory available for XPC structures */
xpLackOfResources, /* 14: insufficient resources for operation */
xpUnregistered, /* 15: channel is not registered */
xpAlreadyRegistered, /* 16: channel is already registered */
xpPartitionDown, /* 17: remote partition is down */
xpNotLoaded, /* 18: XPC module is not loaded */
xpUnloading, /* 19: this side is unloading XPC module */
xpBadMagic, /* 20: XPC MAGIC string not found */
xpReactivating, /* 21: remote partition was reactivated */
xpUnregistering, /* 22: this side is unregistering channel */
xpOtherUnregistering, /* 23: other side is unregistering channel */
xpCloneKThread, /* 24: cloning kernel thread */
xpCloneKThreadFailed, /* 25: cloning kernel thread failed */
xpNoHeartbeat, /* 26: remote partition has no heartbeat */
xpPioReadError, /* 27: PIO read error */
xpPhysAddrRegFailed, /* 28: registration of phys addr range failed */
xpRETIRED3, /* 29: (formerly xpBteDirectoryError) */
xpRETIRED4, /* 30: (formerly xpBtePoisonError) */
xpRETIRED5, /* 31: (formerly xpBteWriteError) */
xpRETIRED6, /* 32: (formerly xpBteAccessError) */
xpRETIRED7, /* 33: (formerly xpBtePWriteError) */
xpRETIRED8, /* 34: (formerly xpBtePReadError) */
xpRETIRED9, /* 35: (formerly xpBteTimeOutError) */
xpRETIRED10, /* 36: (formerly xpBteXtalkError) */
xpRETIRED11, /* 37: (formerly xpBteNotAvailable) */
xpRETIRED12, /* 38: (formerly xpBteUnmappedError) */
xpBadVersion, /* 39: bad version number */
xpVarsNotSet, /* 40: the XPC variables are not set up */
xpNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
xpInvalidPartid, /* 42: invalid partition ID */
xpLocalPartid, /* 43: local partition ID */
xpOtherGoingDown, /* 44: other side going down, reason unknown */
xpSystemGoingDown, /* 45: system is going down, reason unknown */
xpSystemHalt, /* 46: system is being halted */
xpSystemReboot, /* 47: system is being rebooted */
xpSystemPoweroff, /* 48: system is being powered off */
xpDisconnecting, /* 49: channel disconnecting (closing) */
xpOpenCloseError, /* 50: channel open/close protocol error */
xpDisconnected, /* 51: channel disconnected (closed) */
xpBteCopyError, /* 52: bte_copy() returned error */
xpSalError, /* 53: sn SAL error */
xpRsvdPageNotSet, /* 54: the reserved page is not set up */
xpPayloadTooBig, /* 55: payload too large for message slot */
xpUnsupported, /* 56: unsupported functionality or resource */
xpNeedMoreInfo, /* 57: more info is needed by SAL */
xpGruCopyError, /* 58: gru_copy_gru() returned error */
xpGruSendMqError, /* 59: gru send message queue related error */
xpBadChannelNumber, /* 60: invalid channel number */
xpBadMsgType, /* 61: invalid message type */
xpBiosError, /* 62: BIOS error */
xpUnknownReason /* 63: unknown reason - must be last in enum */
};
/*
* Define the callout function type used by XPC to update the user on
* connection activity and state changes via the user function registered
* by xpc_connect().
*
* Arguments:
*
* reason - reason code.
* partid - partition ID associated with condition.
* ch_number - channel # associated with condition.
* data - pointer to optional data.
* key - pointer to optional user-defined value provided as the "key"
* argument to xpc_connect().
*
* A reason code of xpConnected indicates that a connection has been
* established to the specified partition on the specified channel. The data
* argument indicates the max number of entries allowed in the message queue.
*
* A reason code of xpMsgReceived indicates that a XPC message arrived from
* the specified partition on the specified channel. The data argument
* specifies the address of the message's payload. The user must call
* xpc_received() when finished with the payload.
*
* All other reason codes indicate failure. The data argmument is NULL.
* When a failure reason code is received, one can assume that the channel
* is not connected.
*/
typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
int ch_number, void *data, void *key);
/*
* Define the callout function type used by XPC to notify the user of
* messages received and delivered via the user function registered by
* xpc_send_notify().
*
* Arguments:
*
* reason - reason code.
* partid - partition ID associated with condition.
* ch_number - channel # associated with condition.
* key - pointer to optional user-defined value provided as the "key"
* argument to xpc_send_notify().
*
* A reason code of xpMsgDelivered indicates that the message was delivered
* to the intended recipient and that they have acknowledged its receipt by
* calling xpc_received().
*
* All other reason codes indicate failure.
*
* NOTE: The user defined function must be callable by an interrupt handler
* and thus cannot block.
*/
typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
int ch_number, void *key);
/*
* The following is a registration entry. There is a global array of these,
* one per channel. It is used to record the connection registration made
* by the users of XPC. As long as a registration entry exists, for any
* partition that comes up, XPC will attempt to establish a connection on
* that channel. Notification that a connection has been made will occur via
* the xpc_channel_func function.
*
* The 'func' field points to the function to call when aynchronous
* notification is required for such events as: a connection established/lost,
* or an incoming message received, or an error condition encountered. A
* non-NULL 'func' field indicates that there is an active registration for
* the channel.
*/
struct xpc_registration {
struct mutex mutex;
xpc_channel_func func; /* function to call */
void *key; /* pointer to user's key */
u16 nentries; /* #of msg entries in local msg queue */
u16 entry_size; /* message queue's message entry size */
u32 assigned_limit; /* limit on #of assigned kthreads */
u32 idle_limit; /* limit on #of idle kthreads */
} ____cacheline_aligned;
#define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL)
/* the following are valid xpc_send() or xpc_send_notify() flags */
#define XPC_WAIT 0 /* wait flag */
#define XPC_NOWAIT 1 /* no wait flag */
struct xpc_interface {
void (*connect) (int);
void (*disconnect) (int);
enum xp_retval (*send) (short, int, u32, void *, u16);
enum xp_retval (*send_notify) (short, int, u32, void *, u16,
xpc_notify_func, void *);
void (*received) (short, int, void *);
enum xp_retval (*partid_to_nasids) (short, void *);
};
extern struct xpc_interface xpc_interface;
extern void xpc_set_interface(void (*)(int),
void (*)(int),
enum xp_retval (*)(short, int, u32, void *, u16),
enum xp_retval (*)(short, int, u32, void *, u16,
xpc_notify_func, void *),
void (*)(short, int, void *),
enum xp_retval (*)(short, void *));
extern void xpc_clear_interface(void);
extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
u16, u32, u32);
extern void xpc_disconnect(int);
static inline enum xp_retval
xpc_send(short partid, int ch_number, u32 flags, void *payload,
u16 payload_size)
{
if (!xpc_interface.send)
return xpNotLoaded;
return xpc_interface.send(partid, ch_number, flags, payload,
payload_size);
}
static inline enum xp_retval
xpc_send_notify(short partid, int ch_number, u32 flags, void *payload,
u16 payload_size, xpc_notify_func func, void *key)
{
if (!xpc_interface.send_notify)
return xpNotLoaded;
return xpc_interface.send_notify(partid, ch_number, flags, payload,
payload_size, func, key);
}
static inline void
xpc_received(short partid, int ch_number, void *payload)
{
if (xpc_interface.received)
xpc_interface.received(partid, ch_number, payload);
}
static inline enum xp_retval
xpc_partid_to_nasids(short partid, void *nasids)
{
if (!xpc_interface.partid_to_nasids)
return xpNotLoaded;
return xpc_interface.partid_to_nasids(partid, nasids);
}
extern short xp_max_npartitions;
extern short xp_partition_id;
extern u8 xp_region_size;
extern unsigned long (*xp_pa) (void *);
extern unsigned long (*xp_socket_pa) (unsigned long);
extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long,
size_t);
extern int (*xp_cpu_to_nasid) (int);
extern enum xp_retval (*xp_expand_memprotect) (unsigned long, unsigned long);
extern enum xp_retval (*xp_restrict_memprotect) (unsigned long, unsigned long);
extern struct device *xp;
extern enum xp_retval xp_init_uv(void);
extern void xp_exit_uv(void);
#endif /* _DRIVERS_MISC_SGIXP_XP_H */