9842c62162
`m10bmc_pmci_regmap_config` and `intel_m10bmc_regmap_config` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-7-0c8785b1331d@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
185 lines
5.6 KiB
C
185 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel MAX 10 Board Management Controller chip
|
|
*
|
|
* Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/dev_printk.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/intel-m10-bmc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
static const struct regmap_range m10bmc_regmap_range[] = {
|
|
regmap_reg_range(M10BMC_N3000_LEGACY_BUILD_VER, M10BMC_N3000_LEGACY_BUILD_VER),
|
|
regmap_reg_range(M10BMC_N3000_SYS_BASE, M10BMC_N3000_SYS_END),
|
|
regmap_reg_range(M10BMC_N3000_FLASH_BASE, M10BMC_N3000_FLASH_END),
|
|
};
|
|
|
|
static const struct regmap_access_table m10bmc_access_table = {
|
|
.yes_ranges = m10bmc_regmap_range,
|
|
.n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
|
|
};
|
|
|
|
static const struct regmap_config intel_m10bmc_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.wr_table = &m10bmc_access_table,
|
|
.rd_table = &m10bmc_access_table,
|
|
.max_register = M10BMC_N3000_MEM_END,
|
|
};
|
|
|
|
static int check_m10bmc_version(struct intel_m10bmc *ddata)
|
|
{
|
|
unsigned int v;
|
|
int ret;
|
|
|
|
/*
|
|
* This check is to filter out the very old legacy BMC versions. In the
|
|
* old BMC chips, the BMC version info is stored in the old version
|
|
* register (M10BMC_N3000_LEGACY_BUILD_VER), so its read out value would have
|
|
* not been M10BMC_N3000_VER_LEGACY_INVALID (0xffffffff). But in new BMC
|
|
* chips that the driver supports, the value of this register should be
|
|
* M10BMC_N3000_VER_LEGACY_INVALID.
|
|
*/
|
|
ret = m10bmc_raw_read(ddata, M10BMC_N3000_LEGACY_BUILD_VER, &v);
|
|
if (ret)
|
|
return -ENODEV;
|
|
|
|
if (v != M10BMC_N3000_VER_LEGACY_INVALID) {
|
|
dev_err(ddata->dev, "bad version M10BMC detected\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_m10_bmc_spi_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
const struct intel_m10bmc_platform_info *info;
|
|
struct device *dev = &spi->dev;
|
|
struct intel_m10bmc *ddata;
|
|
int ret;
|
|
|
|
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (!ddata)
|
|
return -ENOMEM;
|
|
|
|
info = (struct intel_m10bmc_platform_info *)id->driver_data;
|
|
ddata->dev = dev;
|
|
|
|
ddata->regmap = devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
|
|
if (IS_ERR(ddata->regmap)) {
|
|
ret = PTR_ERR(ddata->regmap);
|
|
dev_err(dev, "Failed to allocate regmap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
spi_set_drvdata(spi, ddata);
|
|
|
|
ret = check_m10bmc_version(ddata);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to identify m10bmc hardware\n");
|
|
return ret;
|
|
}
|
|
|
|
return m10bmc_dev_init(ddata, info);
|
|
}
|
|
|
|
static const struct m10bmc_csr_map m10bmc_n3000_csr_map = {
|
|
.base = M10BMC_N3000_SYS_BASE,
|
|
.build_version = M10BMC_N3000_BUILD_VER,
|
|
.fw_version = NIOS2_N3000_FW_VERSION,
|
|
.mac_low = M10BMC_N3000_MAC_LOW,
|
|
.mac_high = M10BMC_N3000_MAC_HIGH,
|
|
.doorbell = M10BMC_N3000_DOORBELL,
|
|
.auth_result = M10BMC_N3000_AUTH_RESULT,
|
|
.bmc_prog_addr = M10BMC_N3000_BMC_PROG_ADDR,
|
|
.bmc_reh_addr = M10BMC_N3000_BMC_REH_ADDR,
|
|
.bmc_magic = M10BMC_N3000_BMC_PROG_MAGIC,
|
|
.sr_prog_addr = M10BMC_N3000_SR_PROG_ADDR,
|
|
.sr_reh_addr = M10BMC_N3000_SR_REH_ADDR,
|
|
.sr_magic = M10BMC_N3000_SR_PROG_MAGIC,
|
|
.pr_prog_addr = M10BMC_N3000_PR_PROG_ADDR,
|
|
.pr_reh_addr = M10BMC_N3000_PR_REH_ADDR,
|
|
.pr_magic = M10BMC_N3000_PR_PROG_MAGIC,
|
|
.rsu_update_counter = M10BMC_N3000_STAGING_FLASH_COUNT,
|
|
.staging_size = M10BMC_STAGING_SIZE,
|
|
};
|
|
|
|
static struct mfd_cell m10bmc_d5005_subdevs[] = {
|
|
{ .name = "d5005bmc-hwmon" },
|
|
{ .name = "d5005bmc-sec-update" },
|
|
};
|
|
|
|
static const struct regmap_range m10bmc_d5005_fw_handshake_regs[] = {
|
|
regmap_reg_range(M10BMC_N3000_TELEM_START, M10BMC_D5005_TELEM_END),
|
|
};
|
|
|
|
static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
|
|
{ .name = "n3000bmc-hwmon" },
|
|
{ .name = "n3000bmc-retimer" },
|
|
{ .name = "n3000bmc-sec-update" },
|
|
};
|
|
|
|
static const struct regmap_range m10bmc_n3000_fw_handshake_regs[] = {
|
|
regmap_reg_range(M10BMC_N3000_TELEM_START, M10BMC_N3000_TELEM_END),
|
|
};
|
|
|
|
static struct mfd_cell m10bmc_n5010_subdevs[] = {
|
|
{ .name = "n5010bmc-hwmon" },
|
|
};
|
|
|
|
static const struct intel_m10bmc_platform_info m10bmc_spi_n3000 = {
|
|
.cells = m10bmc_pacn3000_subdevs,
|
|
.n_cells = ARRAY_SIZE(m10bmc_pacn3000_subdevs),
|
|
.handshake_sys_reg_ranges = m10bmc_n3000_fw_handshake_regs,
|
|
.handshake_sys_reg_nranges = ARRAY_SIZE(m10bmc_n3000_fw_handshake_regs),
|
|
.csr_map = &m10bmc_n3000_csr_map,
|
|
};
|
|
|
|
static const struct intel_m10bmc_platform_info m10bmc_spi_d5005 = {
|
|
.cells = m10bmc_d5005_subdevs,
|
|
.n_cells = ARRAY_SIZE(m10bmc_d5005_subdevs),
|
|
.handshake_sys_reg_ranges = m10bmc_d5005_fw_handshake_regs,
|
|
.handshake_sys_reg_nranges = ARRAY_SIZE(m10bmc_d5005_fw_handshake_regs),
|
|
.csr_map = &m10bmc_n3000_csr_map,
|
|
};
|
|
|
|
static const struct intel_m10bmc_platform_info m10bmc_spi_n5010 = {
|
|
.cells = m10bmc_n5010_subdevs,
|
|
.n_cells = ARRAY_SIZE(m10bmc_n5010_subdevs),
|
|
.handshake_sys_reg_ranges = m10bmc_n3000_fw_handshake_regs,
|
|
.handshake_sys_reg_nranges = ARRAY_SIZE(m10bmc_n3000_fw_handshake_regs),
|
|
.csr_map = &m10bmc_n3000_csr_map,
|
|
};
|
|
|
|
static const struct spi_device_id m10bmc_spi_id[] = {
|
|
{ "m10-n3000", (kernel_ulong_t)&m10bmc_spi_n3000 },
|
|
{ "m10-d5005", (kernel_ulong_t)&m10bmc_spi_d5005 },
|
|
{ "m10-n5010", (kernel_ulong_t)&m10bmc_spi_n5010 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
|
|
|
|
static struct spi_driver intel_m10bmc_spi_driver = {
|
|
.driver = {
|
|
.name = "intel-m10-bmc",
|
|
.dev_groups = m10bmc_dev_groups,
|
|
},
|
|
.probe = intel_m10_bmc_spi_probe,
|
|
.id_table = m10bmc_spi_id,
|
|
};
|
|
module_spi_driver(intel_m10bmc_spi_driver);
|
|
|
|
MODULE_DESCRIPTION("Intel MAX 10 BMC SPI bus interface");
|
|
MODULE_AUTHOR("Intel Corporation");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:intel-m10-bmc");
|
|
MODULE_IMPORT_NS(INTEL_M10_BMC_CORE);
|