kevin/linux
1
Fork 0
Code
master
linux/drivers/media/i2c/imx335.c
Al Viro 5f60d5f6bb move asm/unaligned.h to linux/unaligned.h 
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-10-02 17:23:23 -04:00

1399 lines
36 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Sony imx335 Camera Sensor Driver
*
* Copyright (C) 2021 Intel Corporation
*/
#include <linux/unaligned.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <media/v4l2-cci.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
/* Streaming Mode */
#define IMX335_REG_MODE_SELECT CCI_REG8(0x3000)
#define IMX335_MODE_STANDBY 0x01
#define IMX335_MODE_STREAMING 0x00
/* Group hold register */
#define IMX335_REG_HOLD CCI_REG8(0x3001)
#define IMX335_REG_MASTER_MODE CCI_REG8(0x3002)
#define IMX335_REG_BCWAIT_TIME CCI_REG8(0x300c)
#define IMX335_REG_CPWAIT_TIME CCI_REG8(0x300d)
#define IMX335_REG_WINMODE CCI_REG8(0x3018)
#define IMX335_REG_HTRIMMING_START CCI_REG16_LE(0x302c)
#define IMX335_REG_HNUM CCI_REG8(0x302e)
/* Lines per frame */
#define IMX335_REG_VMAX CCI_REG24_LE(0x3030)
#define IMX335_REG_OPB_SIZE_V CCI_REG8(0x304c)
#define IMX335_REG_ADBIT CCI_REG8(0x3050)
#define IMX335_REG_Y_OUT_SIZE CCI_REG16_LE(0x3056)
#define IMX335_REG_SHUTTER CCI_REG24_LE(0x3058)
#define IMX335_EXPOSURE_MIN 1
#define IMX335_EXPOSURE_OFFSET 9
#define IMX335_EXPOSURE_STEP 1
#define IMX335_EXPOSURE_DEFAULT 0x0648
#define IMX335_REG_AREA3_ST_ADR_1 CCI_REG16_LE(0x3074)
#define IMX335_REG_AREA3_WIDTH_1 CCI_REG16_LE(0x3076)
/* Analog and Digital gain control */
#define IMX335_REG_GAIN CCI_REG8(0x30e8)
#define IMX335_AGAIN_MIN 0
#define IMX335_AGAIN_MAX 100
#define IMX335_AGAIN_STEP 1
#define IMX335_AGAIN_DEFAULT 0
#define IMX335_REG_TPG_TESTCLKEN CCI_REG8(0x3148)
#define IMX335_REG_INCLKSEL1 CCI_REG16_LE(0x314c)
#define IMX335_REG_INCLKSEL2 CCI_REG8(0x315a)
#define IMX335_REG_INCLKSEL3 CCI_REG8(0x3168)
#define IMX335_REG_INCLKSEL4 CCI_REG8(0x316a)
#define IMX335_REG_MDBIT CCI_REG8(0x319d)
#define IMX335_REG_SYSMODE CCI_REG8(0x319e)
#define IMX335_REG_XVS_XHS_DRV CCI_REG8(0x31a1)
/* Test pattern generator */
#define IMX335_REG_TPG_DIG_CLP_MODE CCI_REG8(0x3280)
#define IMX335_REG_TPG_EN_DUOUT CCI_REG8(0x329c)
#define IMX335_REG_TPG CCI_REG8(0x329e)
#define IMX335_TPG_ALL_000 0
#define IMX335_TPG_ALL_FFF 1
#define IMX335_TPG_ALL_555 2
#define IMX335_TPG_ALL_AAA 3
#define IMX335_TPG_TOG_555_AAA 4
#define IMX335_TPG_TOG_AAA_555 5
#define IMX335_TPG_TOG_000_555 6
#define IMX335_TPG_TOG_555_000 7
#define IMX335_TPG_TOG_000_FFF 8
#define IMX335_TPG_TOG_FFF_000 9
#define IMX335_TPG_H_COLOR_BARS 10
#define IMX335_TPG_V_COLOR_BARS 11
#define IMX335_REG_TPG_COLORWIDTH CCI_REG8(0x32a0)
#define IMX335_REG_BLKLEVEL CCI_REG16_LE(0x3302)
#define IMX335_REG_WRJ_OPEN CCI_REG8(0x336c)
#define IMX335_REG_ADBIT1 CCI_REG16_LE(0x341c)
/* Chip ID */
#define IMX335_REG_ID CCI_REG8(0x3912)
#define IMX335_ID 0x00
/* Data Lanes */
#define IMX335_REG_LANEMODE CCI_REG8(0x3a01)
#define IMX335_2LANE 1
#define IMX335_4LANE 3
#define IMX335_REG_TCLKPOST CCI_REG16_LE(0x3a18)
#define IMX335_REG_TCLKPREPARE CCI_REG16_LE(0x3a1a)
#define IMX335_REG_TCLK_TRAIL CCI_REG16_LE(0x3a1c)
#define IMX335_REG_TCLK_ZERO CCI_REG16_LE(0x3a1e)
#define IMX335_REG_THS_PREPARE CCI_REG16_LE(0x3a20)
#define IMX335_REG_THS_ZERO CCI_REG16_LE(0x3a22)
#define IMX335_REG_THS_TRAIL CCI_REG16_LE(0x3a24)
#define IMX335_REG_THS_EXIT CCI_REG16_LE(0x3a26)
#define IMX335_REG_TPLX CCI_REG16_LE(0x3a28)
/* Input clock rate */
#define IMX335_INCLK_RATE 24000000
/* CSI2 HW configuration */
#define IMX335_LINK_FREQ_594MHz 594000000LL
#define IMX335_LINK_FREQ_445MHz 445500000LL
#define IMX335_NUM_DATA_LANES 4
/* IMX335 native and active pixel array size. */
#define IMX335_NATIVE_WIDTH 2616U
#define IMX335_NATIVE_HEIGHT 1964U
#define IMX335_PIXEL_ARRAY_LEFT 12U
#define IMX335_PIXEL_ARRAY_TOP 12U
#define IMX335_PIXEL_ARRAY_WIDTH 2592U
#define IMX335_PIXEL_ARRAY_HEIGHT 1944U
/**
* struct imx335_reg_list - imx335 sensor register list
* @num_of_regs: Number of registers in the list
* @regs: Pointer to register list
*/
struct imx335_reg_list {
u32 num_of_regs;
const struct cci_reg_sequence *regs;
};
static const char * const imx335_supply_name[] = {
"avdd", /* Analog (2.9V) supply */
"ovdd", /* Digital I/O (1.8V) supply */
"dvdd", /* Digital Core (1.2V) supply */
};
/**
* struct imx335_mode - imx335 sensor mode structure
* @width: Frame width
* @height: Frame height
* @code: Format code
* @hblank: Horizontal blanking in lines
* @vblank: Vertical blanking in lines
* @vblank_min: Minimum vertical blanking in lines
* @vblank_max: Maximum vertical blanking in lines
* @pclk: Sensor pixel clock
* @reg_list: Register list for sensor mode
*/
struct imx335_mode {
u32 width;
u32 height;
u32 code;
u32 hblank;
u32 vblank;
u32 vblank_min;
u32 vblank_max;
u64 pclk;
struct imx335_reg_list reg_list;
};
/**
* struct imx335 - imx335 sensor device structure
* @dev: Pointer to generic device
* @client: Pointer to i2c client
* @sd: V4L2 sub-device
* @pad: Media pad. Only one pad supported
* @reset_gpio: Sensor reset gpio
* @supplies: Regulator supplies to handle power control
* @cci: CCI register map
* @inclk: Sensor input clock
* @ctrl_handler: V4L2 control handler
* @link_freq_ctrl: Pointer to link frequency control
* @pclk_ctrl: Pointer to pixel clock control
* @hblank_ctrl: Pointer to horizontal blanking control
* @vblank_ctrl: Pointer to vertical blanking control
* @exp_ctrl: Pointer to exposure control
* @again_ctrl: Pointer to analog gain control
* @vblank: Vertical blanking in lines
* @lane_mode: Mode for number of connected data lanes
* @cur_mode: Pointer to current selected sensor mode
* @mutex: Mutex for serializing sensor controls
* @link_freq_bitmap: Menu bitmap for link_freq_ctrl
* @cur_mbus_code: Currently selected media bus format code
*/
struct imx335 {
struct device *dev;
struct i2c_client *client;
struct v4l2_subdev sd;
struct media_pad pad;
struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[ARRAY_SIZE(imx335_supply_name)];
struct regmap *cci;
struct clk *inclk;
struct v4l2_ctrl_handler ctrl_handler;
struct v4l2_ctrl *link_freq_ctrl;
struct v4l2_ctrl *pclk_ctrl;
struct v4l2_ctrl *hblank_ctrl;
struct v4l2_ctrl *vblank_ctrl;
struct {
struct v4l2_ctrl *exp_ctrl;
struct v4l2_ctrl *again_ctrl;
};
u32 vblank;
u32 lane_mode;
const struct imx335_mode *cur_mode;
struct mutex mutex;
unsigned long link_freq_bitmap;
u32 cur_mbus_code;
};
static const char * const imx335_tpg_menu[] = {
"Disabled",
"All 000h",
"All FFFh",
"All 555h",
"All AAAh",
"Toggle 555/AAAh",
"Toggle AAA/555h",
"Toggle 000/555h",
"Toggle 555/000h",
"Toggle 000/FFFh",
"Toggle FFF/000h",
"Horizontal color bars",
"Vertical color bars",
};
static const int imx335_tpg_val[] = {
IMX335_TPG_ALL_000,
IMX335_TPG_ALL_000,
IMX335_TPG_ALL_FFF,
IMX335_TPG_ALL_555,
IMX335_TPG_ALL_AAA,
IMX335_TPG_TOG_555_AAA,
IMX335_TPG_TOG_AAA_555,
IMX335_TPG_TOG_000_555,
IMX335_TPG_TOG_555_000,
IMX335_TPG_TOG_000_FFF,
IMX335_TPG_TOG_FFF_000,
IMX335_TPG_H_COLOR_BARS,
IMX335_TPG_V_COLOR_BARS,
};
/* Sensor mode registers */
static const struct cci_reg_sequence mode_2592x1940_regs[] = {
{ IMX335_REG_MODE_SELECT, IMX335_MODE_STANDBY },
{ IMX335_REG_MASTER_MODE, 0x00 },
{ IMX335_REG_WINMODE, 0x04 },
{ IMX335_REG_HTRIMMING_START, 48 },
{ IMX335_REG_HNUM, 2592 },
{ IMX335_REG_Y_OUT_SIZE, 1944 },
{ IMX335_REG_AREA3_ST_ADR_1, 176 },
{ IMX335_REG_AREA3_WIDTH_1, 3928 },
{ IMX335_REG_OPB_SIZE_V, 0 },
{ IMX335_REG_XVS_XHS_DRV, 0x00 },
{ CCI_REG8(0x3288), 0x21 },
{ CCI_REG8(0x328a), 0x02 },
{ CCI_REG8(0x3414), 0x05 },
{ CCI_REG8(0x3416), 0x18 },
{ CCI_REG8(0x3648), 0x01 },
{ CCI_REG8(0x364a), 0x04 },
{ CCI_REG8(0x364c), 0x04 },
{ CCI_REG8(0x3678), 0x01 },
{ CCI_REG8(0x367c), 0x31 },
{ CCI_REG8(0x367e), 0x31 },
{ CCI_REG8(0x3706), 0x10 },
{ CCI_REG8(0x3708), 0x03 },
{ CCI_REG8(0x3714), 0x02 },
{ CCI_REG8(0x3715), 0x02 },
{ CCI_REG8(0x3716), 0x01 },
{ CCI_REG8(0x3717), 0x03 },
{ CCI_REG8(0x371c), 0x3d },
{ CCI_REG8(0x371d), 0x3f },
{ CCI_REG8(0x372c), 0x00 },
{ CCI_REG8(0x372d), 0x00 },
{ CCI_REG8(0x372e), 0x46 },
{ CCI_REG8(0x372f), 0x00 },
{ CCI_REG8(0x3730), 0x89 },
{ CCI_REG8(0x3731), 0x00 },
{ CCI_REG8(0x3732), 0x08 },
{ CCI_REG8(0x3733), 0x01 },
{ CCI_REG8(0x3734), 0xfe },
{ CCI_REG8(0x3735), 0x05 },
{ CCI_REG8(0x3740), 0x02 },
{ CCI_REG8(0x375d), 0x00 },
{ CCI_REG8(0x375e), 0x00 },
{ CCI_REG8(0x375f), 0x11 },
{ CCI_REG8(0x3760), 0x01 },
{ CCI_REG8(0x3768), 0x1b },
{ CCI_REG8(0x3769), 0x1b },
{ CCI_REG8(0x376a), 0x1b },
{ CCI_REG8(0x376b), 0x1b },
{ CCI_REG8(0x376c), 0x1a },
{ CCI_REG8(0x376d), 0x17 },
{ CCI_REG8(0x376e), 0x0f },
{ CCI_REG8(0x3776), 0x00 },
{ CCI_REG8(0x3777), 0x00 },
{ CCI_REG8(0x3778), 0x46 },
{ CCI_REG8(0x3779), 0x00 },
{ CCI_REG8(0x377a), 0x89 },
{ CCI_REG8(0x377b), 0x00 },
{ CCI_REG8(0x377c), 0x08 },
{ CCI_REG8(0x377d), 0x01 },
{ CCI_REG8(0x377e), 0x23 },
{ CCI_REG8(0x377f), 0x02 },
{ CCI_REG8(0x3780), 0xd9 },
{ CCI_REG8(0x3781), 0x03 },
{ CCI_REG8(0x3782), 0xf5 },
{ CCI_REG8(0x3783), 0x06 },
{ CCI_REG8(0x3784), 0xa5 },
{ CCI_REG8(0x3788), 0x0f },
{ CCI_REG8(0x378a), 0xd9 },
{ CCI_REG8(0x378b), 0x03 },
{ CCI_REG8(0x378c), 0xeb },
{ CCI_REG8(0x378d), 0x05 },
{ CCI_REG8(0x378e), 0x87 },
{ CCI_REG8(0x378f), 0x06 },
{ CCI_REG8(0x3790), 0xf5 },
{ CCI_REG8(0x3792), 0x43 },
{ CCI_REG8(0x3794), 0x7a },
{ CCI_REG8(0x3796), 0xa1 },
{ CCI_REG8(0x37b0), 0x36 },
{ CCI_REG8(0x3a00), 0x00 },
};
static const struct cci_reg_sequence raw10_framefmt_regs[] = {
{ IMX335_REG_ADBIT, 0x00 },
{ IMX335_REG_MDBIT, 0x00 },
{ IMX335_REG_ADBIT1, 0x1ff },
};
static const struct cci_reg_sequence raw12_framefmt_regs[] = {
{ IMX335_REG_ADBIT, 0x01 },
{ IMX335_REG_MDBIT, 0x01 },
{ IMX335_REG_ADBIT1, 0x47 },
};
static const struct cci_reg_sequence mipi_data_rate_1188Mbps[] = {
{ IMX335_REG_BCWAIT_TIME, 0x3b },
{ IMX335_REG_CPWAIT_TIME, 0x2a },
{ IMX335_REG_INCLKSEL1, 0x00c6 },
{ IMX335_REG_INCLKSEL2, 0x02 },
{ IMX335_REG_INCLKSEL3, 0xa0 },
{ IMX335_REG_INCLKSEL4, 0x7e },
{ IMX335_REG_SYSMODE, 0x01 },
{ IMX335_REG_TCLKPOST, 0x8f },
{ IMX335_REG_TCLKPREPARE, 0x4f },
{ IMX335_REG_TCLK_TRAIL, 0x47 },
{ IMX335_REG_TCLK_ZERO, 0x0137 },
{ IMX335_REG_THS_PREPARE, 0x4f },
{ IMX335_REG_THS_ZERO, 0x87 },
{ IMX335_REG_THS_TRAIL, 0x4f },
{ IMX335_REG_THS_EXIT, 0x7f },
{ IMX335_REG_TPLX, 0x3f },
};
static const struct cci_reg_sequence mipi_data_rate_891Mbps[] = {
{ IMX335_REG_BCWAIT_TIME, 0x3b },
{ IMX335_REG_CPWAIT_TIME, 0x2a },
{ IMX335_REG_INCLKSEL1, 0x0129 },
{ IMX335_REG_INCLKSEL2, 0x06 },
{ IMX335_REG_INCLKSEL3, 0xa0 },
{ IMX335_REG_INCLKSEL4, 0x7e },
{ IMX335_REG_SYSMODE, 0x02 },
{ IMX335_REG_TCLKPOST, 0x7f },
{ IMX335_REG_TCLKPREPARE, 0x37 },
{ IMX335_REG_TCLK_TRAIL, 0x37 },
{ IMX335_REG_TCLK_ZERO, 0xf7 },
{ IMX335_REG_THS_PREPARE, 0x3f },
{ IMX335_REG_THS_ZERO, 0x6f },
{ IMX335_REG_THS_TRAIL, 0x3f },
{ IMX335_REG_THS_EXIT, 0x5f },
{ IMX335_REG_TPLX, 0x2f },
};
static const s64 link_freq[] = {
/* Corresponds to 1188Mbps data lane rate */
IMX335_LINK_FREQ_594MHz,
/* Corresponds to 891Mbps data lane rate */
IMX335_LINK_FREQ_445MHz,
};
static const struct imx335_reg_list link_freq_reglist[] = {
{
.num_of_regs = ARRAY_SIZE(mipi_data_rate_1188Mbps),
.regs = mipi_data_rate_1188Mbps,
},
{
.num_of_regs = ARRAY_SIZE(mipi_data_rate_891Mbps),
.regs = mipi_data_rate_891Mbps,
},
};
static const u32 imx335_mbus_codes[] = {
MEDIA_BUS_FMT_SRGGB12_1X12,
MEDIA_BUS_FMT_SRGGB10_1X10,
};
/* Supported sensor mode configurations */
static const struct imx335_mode supported_mode = {
.width = 2592,
.height = 1944,
.hblank = 342,
.vblank = 2556,
.vblank_min = 2556,
.vblank_max = 133060,
.pclk = 396000000,
.reg_list = {
.num_of_regs = ARRAY_SIZE(mode_2592x1940_regs),
.regs = mode_2592x1940_regs,
},
};
/**
* to_imx335() - imx335 V4L2 sub-device to imx335 device.
* @subdev: pointer to imx335 V4L2 sub-device
*
* Return: pointer to imx335 device
*/
static inline struct imx335 *to_imx335(struct v4l2_subdev *subdev)
{
return container_of(subdev, struct imx335, sd);
}
/**
* imx335_update_controls() - Update control ranges based on streaming mode
* @imx335: pointer to imx335 device
* @mode: pointer to imx335_mode sensor mode
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_update_controls(struct imx335 *imx335,
const struct imx335_mode *mode)
{
int ret;
ret = __v4l2_ctrl_s_ctrl(imx335->link_freq_ctrl,
__ffs(imx335->link_freq_bitmap));
if (ret)
return ret;
ret = __v4l2_ctrl_s_ctrl(imx335->hblank_ctrl, mode->hblank);
if (ret)
return ret;
return __v4l2_ctrl_modify_range(imx335->vblank_ctrl, mode->vblank_min,
mode->vblank_max, 1, mode->vblank);
}
/**
* imx335_update_exp_gain() - Set updated exposure and gain
* @imx335: pointer to imx335 device
* @exposure: updated exposure value
* @gain: updated analog gain value
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_update_exp_gain(struct imx335 *imx335, u32 exposure, u32 gain)
{
u32 lpfr, shutter;
int ret_hold;
int ret = 0;
lpfr = imx335->vblank + imx335->cur_mode->height;
shutter = lpfr - exposure;
dev_dbg(imx335->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u\n",
exposure, gain, shutter, lpfr);
cci_write(imx335->cci, IMX335_REG_HOLD, 1, &ret);
cci_write(imx335->cci, IMX335_REG_VMAX, lpfr, &ret);
cci_write(imx335->cci, IMX335_REG_SHUTTER, shutter, &ret);
cci_write(imx335->cci, IMX335_REG_GAIN, gain, &ret);
/*
* Unconditionally attempt to release the hold, but track the
* error if the unhold itself fails.
*/
ret_hold = cci_write(imx335->cci, IMX335_REG_HOLD, 0, NULL);
if (ret_hold)
ret = ret_hold;
return ret;
}
static int imx335_update_test_pattern(struct imx335 *imx335, u32 pattern_index)
{
int ret = 0;
if (pattern_index >= ARRAY_SIZE(imx335_tpg_val))
return -EINVAL;
if (pattern_index) {
const struct cci_reg_sequence tpg_enable_regs[] = {
{ IMX335_REG_TPG_TESTCLKEN, 0x10 },
{ IMX335_REG_TPG_DIG_CLP_MODE, 0x00 },
{ IMX335_REG_TPG_EN_DUOUT, 0x01 },
{ IMX335_REG_TPG_COLORWIDTH, 0x11 },
{ IMX335_REG_BLKLEVEL, 0x00 },
{ IMX335_REG_WRJ_OPEN, 0x00 },
};
cci_write(imx335->cci, IMX335_REG_TPG,
imx335_tpg_val[pattern_index], &ret);
cci_multi_reg_write(imx335->cci, tpg_enable_regs,
ARRAY_SIZE(tpg_enable_regs), &ret);
} else {
const struct cci_reg_sequence tpg_disable_regs[] = {
{ IMX335_REG_TPG_TESTCLKEN, 0x00 },
{ IMX335_REG_TPG_DIG_CLP_MODE, 0x01 },
{ IMX335_REG_TPG_EN_DUOUT, 0x00 },
{ IMX335_REG_TPG_COLORWIDTH, 0x10 },
{ IMX335_REG_BLKLEVEL, 0x32 },
{ IMX335_REG_WRJ_OPEN, 0x01 },
};
cci_multi_reg_write(imx335->cci, tpg_disable_regs,
ARRAY_SIZE(tpg_disable_regs), &ret);
}
return ret;
}
/**
* imx335_set_ctrl() - Set subdevice control
* @ctrl: pointer to v4l2_ctrl structure
*
* Supported controls:
* - V4L2_CID_VBLANK
* - cluster controls:
* - V4L2_CID_ANALOGUE_GAIN
* - V4L2_CID_EXPOSURE
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx335 *imx335 =
container_of(ctrl->handler, struct imx335, ctrl_handler);
u32 analog_gain;
u32 exposure;
int ret;
/* Propagate change of current control to all related controls */
if (ctrl->id == V4L2_CID_VBLANK) {
imx335->vblank = imx335->vblank_ctrl->val;
dev_dbg(imx335->dev, "Received vblank %u, new lpfr %u\n",
imx335->vblank,
imx335->vblank + imx335->cur_mode->height);
return __v4l2_ctrl_modify_range(imx335->exp_ctrl,
IMX335_EXPOSURE_MIN,
imx335->vblank +
imx335->cur_mode->height -
IMX335_EXPOSURE_OFFSET,
1, IMX335_EXPOSURE_DEFAULT);
}
/*
* Applying V4L2 control value only happens
* when power is up for streaming.
*/
if (pm_runtime_get_if_in_use(imx335->dev) == 0)
return 0;
switch (ctrl->id) {
case V4L2_CID_EXPOSURE:
exposure = ctrl->val;
analog_gain = imx335->again_ctrl->val;
dev_dbg(imx335->dev, "Received exp %u, analog gain %u\n",
exposure, analog_gain);
ret = imx335_update_exp_gain(imx335, exposure, analog_gain);
break;
case V4L2_CID_TEST_PATTERN:
ret = imx335_update_test_pattern(imx335, ctrl->val);
break;
default:
dev_err(imx335->dev, "Invalid control %d\n", ctrl->id);
ret = -EINVAL;
}
pm_runtime_put(imx335->dev);
return ret;
}
/* V4l2 subdevice control ops*/
static const struct v4l2_ctrl_ops imx335_ctrl_ops = {
.s_ctrl = imx335_set_ctrl,
};
static int imx335_get_format_code(struct imx335 *imx335, u32 code)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(imx335_mbus_codes); i++) {
if (imx335_mbus_codes[i] == code)
return imx335_mbus_codes[i];
}
return imx335_mbus_codes[0];
}
/**
* imx335_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @code: V4L2 sub-device code enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->index >= ARRAY_SIZE(imx335_mbus_codes))
return -EINVAL;
code->code = imx335_mbus_codes[code->index];
return 0;
}
/**
* imx335_enum_frame_size() - Enumerate V4L2 sub-device frame sizes
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fsize: V4L2 sub-device size enumeration need to be filled
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fsize)
{
struct imx335 *imx335 = to_imx335(sd);
u32 code;
if (fsize->index > ARRAY_SIZE(imx335_mbus_codes))
return -EINVAL;
code = imx335_get_format_code(imx335, fsize->code);
if (fsize->code != code)
return -EINVAL;
fsize->min_width = supported_mode.width;
fsize->max_width = fsize->min_width;
fsize->min_height = supported_mode.height;
fsize->max_height = fsize->min_height;
return 0;
}
/**
* imx335_fill_pad_format() - Fill subdevice pad format
* from selected sensor mode
* @imx335: pointer to imx335 device
* @mode: pointer to imx335_mode sensor mode
* @fmt: V4L2 sub-device format need to be filled
*/
static void imx335_fill_pad_format(struct imx335 *imx335,
const struct imx335_mode *mode,
struct v4l2_subdev_format *fmt)
{
fmt->format.width = mode->width;
fmt->format.height = mode->height;
fmt->format.code = imx335->cur_mbus_code;
fmt->format.field = V4L2_FIELD_NONE;
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT;
fmt->format.xfer_func = V4L2_XFER_FUNC_NONE;
}
/**
* imx335_get_pad_format() - Get subdevice pad format
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_get_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx335 *imx335 = to_imx335(sd);
mutex_lock(&imx335->mutex);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
fmt->format = *framefmt;
} else {
imx335_fill_pad_format(imx335, imx335->cur_mode, fmt);
}
mutex_unlock(&imx335->mutex);
return 0;
}
/**
* imx335_set_pad_format() - Set subdevice pad format
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @fmt: V4L2 sub-device format need to be set
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct imx335 *imx335 = to_imx335(sd);
const struct imx335_mode *mode;
int i, ret = 0;
mutex_lock(&imx335->mutex);
mode = &supported_mode;
for (i = 0; i < ARRAY_SIZE(imx335_mbus_codes); i++) {
if (imx335_mbus_codes[i] == fmt->format.code)
imx335->cur_mbus_code = imx335_mbus_codes[i];
}
imx335_fill_pad_format(imx335, mode, fmt);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *framefmt;
framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
*framefmt = fmt->format;
} else {
ret = imx335_update_controls(imx335, mode);
if (!ret)
imx335->cur_mode = mode;
}
mutex_unlock(&imx335->mutex);
return ret;
}
/**
* imx335_init_state() - Initialize sub-device state
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_init_state(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state)
{
struct imx335 *imx335 = to_imx335(sd);
struct v4l2_subdev_format fmt = { 0 };
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
imx335_fill_pad_format(imx335, &supported_mode, &fmt);
mutex_lock(&imx335->mutex);
__v4l2_ctrl_modify_range(imx335->link_freq_ctrl, 0,
__fls(imx335->link_freq_bitmap),
~(imx335->link_freq_bitmap),
__ffs(imx335->link_freq_bitmap));
mutex_unlock(&imx335->mutex);
return imx335_set_pad_format(sd, sd_state, &fmt);
}
/**
* imx335_get_selection() - Selection API
* @sd: pointer to imx335 V4L2 sub-device structure
* @sd_state: V4L2 sub-device configuration
* @sel: V4L2 selection info
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_get_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_selection *sel)
{
switch (sel->target) {
case V4L2_SEL_TGT_NATIVE_SIZE:
sel->r.top = 0;
sel->r.left = 0;
sel->r.width = IMX335_NATIVE_WIDTH;
sel->r.height = IMX335_NATIVE_HEIGHT;
return 0;
case V4L2_SEL_TGT_CROP:
case V4L2_SEL_TGT_CROP_DEFAULT:
case V4L2_SEL_TGT_CROP_BOUNDS:
sel->r.top = IMX335_PIXEL_ARRAY_TOP;
sel->r.left = IMX335_PIXEL_ARRAY_LEFT;
sel->r.width = IMX335_PIXEL_ARRAY_WIDTH;
sel->r.height = IMX335_PIXEL_ARRAY_HEIGHT;
return 0;
}
return -EINVAL;
}
static int imx335_set_framefmt(struct imx335 *imx335)
{
switch (imx335->cur_mbus_code) {
case MEDIA_BUS_FMT_SRGGB10_1X10:
return cci_multi_reg_write(imx335->cci, raw10_framefmt_regs,
ARRAY_SIZE(raw10_framefmt_regs),
NULL);
case MEDIA_BUS_FMT_SRGGB12_1X12:
return cci_multi_reg_write(imx335->cci, raw12_framefmt_regs,
ARRAY_SIZE(raw12_framefmt_regs),
NULL);
}
return -EINVAL;
}
/**
* imx335_start_streaming() - Start sensor stream
* @imx335: pointer to imx335 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_start_streaming(struct imx335 *imx335)
{
const struct imx335_reg_list *reg_list;
int ret;
/* Setup PLL */
reg_list = &link_freq_reglist[__ffs(imx335->link_freq_bitmap)];
ret = cci_multi_reg_write(imx335->cci, reg_list->regs,
reg_list->num_of_regs, NULL);
if (ret) {
dev_err(imx335->dev, "%s failed to set plls\n", __func__);
return ret;
}
/* Write sensor mode registers */
reg_list = &imx335->cur_mode->reg_list;
ret = cci_multi_reg_write(imx335->cci, reg_list->regs,
reg_list->num_of_regs, NULL);
if (ret) {
dev_err(imx335->dev, "fail to write initial registers\n");
return ret;
}
ret = imx335_set_framefmt(imx335);
if (ret) {
dev_err(imx335->dev, "%s failed to set frame format: %d\n",
__func__, ret);
return ret;
}
/* Configure lanes */
ret = cci_write(imx335->cci, IMX335_REG_LANEMODE,
imx335->lane_mode, NULL);
if (ret)
return ret;
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx335->sd.ctrl_handler);
if (ret) {
dev_err(imx335->dev, "fail to setup handler\n");
return ret;
}
/* Start streaming */
ret = cci_write(imx335->cci, IMX335_REG_MODE_SELECT,
IMX335_MODE_STREAMING, NULL);
if (ret) {
dev_err(imx335->dev, "fail to start streaming\n");
return ret;
}
/* Initial regulator stabilization period */
usleep_range(18000, 20000);
return 0;
}
/**
* imx335_stop_streaming() - Stop sensor stream
* @imx335: pointer to imx335 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_stop_streaming(struct imx335 *imx335)
{
return cci_write(imx335->cci, IMX335_REG_MODE_SELECT,
IMX335_MODE_STANDBY, NULL);
}
/**
* imx335_set_stream() - Enable sensor streaming
* @sd: pointer to imx335 subdevice
* @enable: set to enable sensor streaming
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx335 *imx335 = to_imx335(sd);
int ret;
mutex_lock(&imx335->mutex);
if (enable) {
ret = pm_runtime_resume_and_get(imx335->dev);
if (ret)
goto error_unlock;
ret = imx335_start_streaming(imx335);
if (ret)
goto error_power_off;
} else {
imx335_stop_streaming(imx335);
pm_runtime_put(imx335->dev);
}
mutex_unlock(&imx335->mutex);
return 0;
error_power_off:
pm_runtime_put(imx335->dev);
error_unlock:
mutex_unlock(&imx335->mutex);
return ret;
}
/**
* imx335_detect() - Detect imx335 sensor
* @imx335: pointer to imx335 device
*
* Return: 0 if successful, -EIO if sensor id does not match
*/
static int imx335_detect(struct imx335 *imx335)
{
int ret;
u64 val;
ret = cci_read(imx335->cci, IMX335_REG_ID, &val, NULL);
if (ret)
return ret;
if (val != IMX335_ID) {
dev_err(imx335->dev, "chip id mismatch: %x!=%llx\n",
IMX335_ID, val);
return -ENXIO;
}
return 0;
}
/**
* imx335_parse_hw_config() - Parse HW configuration and check if supported
* @imx335: pointer to imx335 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_parse_hw_config(struct imx335 *imx335)
{
struct fwnode_handle *fwnode = dev_fwnode(imx335->dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
struct fwnode_handle *ep;
unsigned long rate;
unsigned int i;
int ret;
if (!fwnode)
return -ENXIO;
/* Request optional reset pin */
imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(imx335->reset_gpio)) {
dev_err(imx335->dev, "failed to get reset gpio %ld\n",
PTR_ERR(imx335->reset_gpio));
return PTR_ERR(imx335->reset_gpio);
}
for (i = 0; i < ARRAY_SIZE(imx335_supply_name); i++)
imx335->supplies[i].supply = imx335_supply_name[i];
ret = devm_regulator_bulk_get(imx335->dev,
ARRAY_SIZE(imx335_supply_name),
imx335->supplies);
if (ret) {
dev_err(imx335->dev, "Failed to get regulators\n");
return ret;
}
/* Get sensor input clock */
imx335->inclk = devm_clk_get(imx335->dev, NULL);
if (IS_ERR(imx335->inclk)) {
dev_err(imx335->dev, "could not get inclk\n");
return PTR_ERR(imx335->inclk);
}
rate = clk_get_rate(imx335->inclk);
if (rate != IMX335_INCLK_RATE) {
dev_err(imx335->dev, "inclk frequency mismatch\n");
return -EINVAL;
}
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep) {
dev_err(imx335->dev, "Failed to get next endpoint\n");
return -ENXIO;
}
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
return ret;
switch (bus_cfg.bus.mipi_csi2.num_data_lanes) {
case 2:
imx335->lane_mode = IMX335_2LANE;
break;
case 4:
imx335->lane_mode = IMX335_4LANE;
break;
default:
dev_err(imx335->dev,
"number of CSI2 data lanes %d is not supported\n",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto done_endpoint_free;
}
ret = v4l2_link_freq_to_bitmap(imx335->dev, bus_cfg.link_frequencies,
bus_cfg.nr_of_link_frequencies,
link_freq, ARRAY_SIZE(link_freq),
&imx335->link_freq_bitmap);
done_endpoint_free:
v4l2_fwnode_endpoint_free(&bus_cfg);
return ret;
}
/* V4l2 subdevice ops */
static const struct v4l2_subdev_video_ops imx335_video_ops = {
.s_stream = imx335_set_stream,
};
static const struct v4l2_subdev_pad_ops imx335_pad_ops = {
.enum_mbus_code = imx335_enum_mbus_code,
.enum_frame_size = imx335_enum_frame_size,
.get_selection = imx335_get_selection,
.set_selection = imx335_get_selection,
.get_fmt = imx335_get_pad_format,
.set_fmt = imx335_set_pad_format,
};
static const struct v4l2_subdev_ops imx335_subdev_ops = {
.video = &imx335_video_ops,
.pad = &imx335_pad_ops,
};
static const struct v4l2_subdev_internal_ops imx335_internal_ops = {
.init_state = imx335_init_state,
};
/**
* imx335_power_on() - Sensor power on sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_power_on(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx335 *imx335 = to_imx335(sd);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(imx335_supply_name),
imx335->supplies);
if (ret) {
dev_err(dev, "%s: failed to enable regulators\n",
__func__);
return ret;
}
usleep_range(500, 550); /* Tlow */
gpiod_set_value_cansleep(imx335->reset_gpio, 0);
ret = clk_prepare_enable(imx335->inclk);
if (ret) {
dev_err(imx335->dev, "fail to enable inclk\n");
goto error_reset;
}
usleep_range(20, 22); /* T4 */
return 0;
error_reset:
gpiod_set_value_cansleep(imx335->reset_gpio, 1);
regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);
return ret;
}
/**
* imx335_power_off() - Sensor power off sequence
* @dev: pointer to i2c device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_power_off(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
struct imx335 *imx335 = to_imx335(sd);
gpiod_set_value_cansleep(imx335->reset_gpio, 1);
clk_disable_unprepare(imx335->inclk);
regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);
return 0;
}
/**
* imx335_init_controls() - Initialize sensor subdevice controls
* @imx335: pointer to imx335 device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_init_controls(struct imx335 *imx335)
{
struct v4l2_ctrl_handler *ctrl_hdlr = &imx335->ctrl_handler;
const struct imx335_mode *mode = imx335->cur_mode;
struct v4l2_fwnode_device_properties props;
u32 lpfr;
int ret;
ret = v4l2_fwnode_device_parse(imx335->dev, &props);
if (ret)
return ret;
/* v4l2_fwnode_device_properties can add two more controls */
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 9);
if (ret)
return ret;
/* Serialize controls with sensor device */
ctrl_hdlr->lock = &imx335->mutex;
/* Initialize exposure and gain */
lpfr = mode->vblank + mode->height;
imx335->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_EXPOSURE,
IMX335_EXPOSURE_MIN,
lpfr - IMX335_EXPOSURE_OFFSET,
IMX335_EXPOSURE_STEP,
IMX335_EXPOSURE_DEFAULT);
/*
* The sensor has an analog gain and a digital gain, both controlled
* through a single gain value, expressed in 0.3dB increments. Values
* from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values
* up to 72.0dB (240) add further digital gain. Limit the range to
* analog gain only, support for digital gain can be added separately
* if needed.
*/
imx335->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN,
IMX335_AGAIN_MIN,
IMX335_AGAIN_MAX,
IMX335_AGAIN_STEP,
IMX335_AGAIN_DEFAULT);
v4l2_ctrl_cluster(2, &imx335->exp_ctrl);
imx335->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_VBLANK,
mode->vblank_min,
mode->vblank_max,
1, mode->vblank);
v4l2_ctrl_new_std_menu_items(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(imx335_tpg_menu) - 1,
0, 0, imx335_tpg_menu);
/* Read only controls */
imx335->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_PIXEL_RATE,
mode->pclk, mode->pclk,
1, mode->pclk);
imx335->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_LINK_FREQ,
__fls(imx335->link_freq_bitmap),
__ffs(imx335->link_freq_bitmap),
link_freq);
if (imx335->link_freq_ctrl)
imx335->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
imx335->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr,
&imx335_ctrl_ops,
V4L2_CID_HBLANK,
mode->hblank,
mode->hblank,
1, mode->hblank);
if (imx335->hblank_ctrl)
imx335->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx335_ctrl_ops, &props);
if (ctrl_hdlr->error) {
dev_err(imx335->dev, "control init failed: %d\n",
ctrl_hdlr->error);
v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
}
imx335->sd.ctrl_handler = ctrl_hdlr;
return 0;
}
/**
* imx335_probe() - I2C client device binding
* @client: pointer to i2c client device
*
* Return: 0 if successful, error code otherwise.
*/
static int imx335_probe(struct i2c_client *client)
{
struct imx335 *imx335;
int ret;
imx335 = devm_kzalloc(&client->dev, sizeof(*imx335), GFP_KERNEL);
if (!imx335)
return -ENOMEM;
imx335->dev = &client->dev;
imx335->cci = devm_cci_regmap_init_i2c(client, 16);
if (IS_ERR(imx335->cci)) {
dev_err(imx335->dev, "Unable to initialize I2C\n");
return -ENODEV;
}
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx335->sd, client, &imx335_subdev_ops);
imx335->sd.internal_ops = &imx335_internal_ops;
ret = imx335_parse_hw_config(imx335);
if (ret) {
dev_err(imx335->dev, "HW configuration is not supported\n");
return ret;
}
mutex_init(&imx335->mutex);
ret = imx335_power_on(imx335->dev);
if (ret) {
dev_err(imx335->dev, "failed to power-on the sensor\n");
goto error_mutex_destroy;
}
/* Check module identity */
ret = imx335_detect(imx335);
if (ret) {
dev_err(imx335->dev, "failed to find sensor: %d\n", ret);
goto error_power_off;
}
/* Set default mode to max resolution */
imx335->cur_mode = &supported_mode;
imx335->cur_mbus_code = imx335_mbus_codes[0];
imx335->vblank = imx335->cur_mode->vblank;
ret = imx335_init_controls(imx335);
if (ret) {
dev_err(imx335->dev, "failed to init controls: %d\n", ret);
goto error_power_off;
}
/* Initialize subdev */
imx335->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
imx335->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
/* Initialize source pad */
imx335->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx335->sd.entity, 1, &imx335->pad);
if (ret) {
dev_err(imx335->dev, "failed to init entity pads: %d\n", ret);
goto error_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&imx335->sd);
if (ret < 0) {
dev_err(imx335->dev,
"failed to register async subdev: %d\n", ret);
goto error_media_entity;
}
pm_runtime_set_active(imx335->dev);
pm_runtime_enable(imx335->dev);
pm_runtime_idle(imx335->dev);
return 0;
error_media_entity:
media_entity_cleanup(&imx335->sd.entity);
error_handler_free:
v4l2_ctrl_handler_free(imx335->sd.ctrl_handler);
error_power_off:
imx335_power_off(imx335->dev);
error_mutex_destroy:
mutex_destroy(&imx335->mutex);
return ret;
}
/**
* imx335_remove() - I2C client device unbinding
* @client: pointer to I2C client device
*
* Return: 0 if successful, error code otherwise.
*/
static void imx335_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct imx335 *imx335 = to_imx335(sd);
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
if (!pm_runtime_status_suspended(&client->dev))
imx335_power_off(&client->dev);
pm_runtime_set_suspended(&client->dev);
mutex_destroy(&imx335->mutex);
}
static const struct dev_pm_ops imx335_pm_ops = {
SET_RUNTIME_PM_OPS(imx335_power_off, imx335_power_on, NULL)
};
static const struct of_device_id imx335_of_match[] = {
{ .compatible = "sony,imx335" },
{ }
};
MODULE_DEVICE_TABLE(of, imx335_of_match);
static struct i2c_driver imx335_driver = {
.probe = imx335_probe,
.remove = imx335_remove,
.driver = {
.name = "imx335",
.pm = &imx335_pm_ops,
.of_match_table = imx335_of_match,
},
};
module_i2c_driver(imx335_driver);
MODULE_DESCRIPTION("Sony imx335 sensor driver");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink