aaeb31c00e
After commitb8a1a4cd5a
("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit03c835f498
("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
859 lines
22 KiB
C
859 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for Analog Devices ADV748X HDMI receiver with AFE
|
|
*
|
|
* Copyright (C) 2017 Renesas Electronics Corp.
|
|
*
|
|
* Authors:
|
|
* Koji Matsuoka <koji.matsuoka.xm@renesas.com>
|
|
* Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
* Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
|
|
#include "adv748x.h"
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Register manipulation
|
|
*/
|
|
|
|
#define ADV748X_REGMAP_CONF(n) \
|
|
{ \
|
|
.name = n, \
|
|
.reg_bits = 8, \
|
|
.val_bits = 8, \
|
|
.max_register = 0xff, \
|
|
.cache_type = REGCACHE_NONE, \
|
|
}
|
|
|
|
static const struct regmap_config adv748x_regmap_cnf[] = {
|
|
ADV748X_REGMAP_CONF("io"),
|
|
ADV748X_REGMAP_CONF("dpll"),
|
|
ADV748X_REGMAP_CONF("cp"),
|
|
ADV748X_REGMAP_CONF("hdmi"),
|
|
ADV748X_REGMAP_CONF("edid"),
|
|
ADV748X_REGMAP_CONF("repeater"),
|
|
ADV748X_REGMAP_CONF("infoframe"),
|
|
ADV748X_REGMAP_CONF("cbus"),
|
|
ADV748X_REGMAP_CONF("cec"),
|
|
ADV748X_REGMAP_CONF("sdp"),
|
|
ADV748X_REGMAP_CONF("txa"),
|
|
ADV748X_REGMAP_CONF("txb"),
|
|
};
|
|
|
|
static int adv748x_configure_regmap(struct adv748x_state *state, int region)
|
|
{
|
|
int err;
|
|
|
|
if (!state->i2c_clients[region])
|
|
return -ENODEV;
|
|
|
|
state->regmap[region] =
|
|
devm_regmap_init_i2c(state->i2c_clients[region],
|
|
&adv748x_regmap_cnf[region]);
|
|
|
|
if (IS_ERR(state->regmap[region])) {
|
|
err = PTR_ERR(state->regmap[region]);
|
|
adv_err(state,
|
|
"Error initializing regmap %d with error %d\n",
|
|
region, err);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
struct adv748x_register_map {
|
|
const char *name;
|
|
u8 default_addr;
|
|
};
|
|
|
|
static const struct adv748x_register_map adv748x_default_addresses[] = {
|
|
[ADV748X_PAGE_IO] = { "main", 0x70 },
|
|
[ADV748X_PAGE_DPLL] = { "dpll", 0x26 },
|
|
[ADV748X_PAGE_CP] = { "cp", 0x22 },
|
|
[ADV748X_PAGE_HDMI] = { "hdmi", 0x34 },
|
|
[ADV748X_PAGE_EDID] = { "edid", 0x36 },
|
|
[ADV748X_PAGE_REPEATER] = { "repeater", 0x32 },
|
|
[ADV748X_PAGE_INFOFRAME] = { "infoframe", 0x31 },
|
|
[ADV748X_PAGE_CBUS] = { "cbus", 0x30 },
|
|
[ADV748X_PAGE_CEC] = { "cec", 0x41 },
|
|
[ADV748X_PAGE_SDP] = { "sdp", 0x79 },
|
|
[ADV748X_PAGE_TXB] = { "txb", 0x48 },
|
|
[ADV748X_PAGE_TXA] = { "txa", 0x4a },
|
|
};
|
|
|
|
static int adv748x_read_check(struct adv748x_state *state,
|
|
int client_page, u8 reg)
|
|
{
|
|
struct i2c_client *client = state->i2c_clients[client_page];
|
|
int err;
|
|
unsigned int val;
|
|
|
|
err = regmap_read(state->regmap[client_page], reg, &val);
|
|
|
|
if (err) {
|
|
adv_err(state, "error reading %02x, %02x\n",
|
|
client->addr, reg);
|
|
return err;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
int adv748x_read(struct adv748x_state *state, u8 page, u8 reg)
|
|
{
|
|
return adv748x_read_check(state, page, reg);
|
|
}
|
|
|
|
int adv748x_write(struct adv748x_state *state, u8 page, u8 reg, u8 value)
|
|
{
|
|
return regmap_write(state->regmap[page], reg, value);
|
|
}
|
|
|
|
static int adv748x_write_check(struct adv748x_state *state, u8 page, u8 reg,
|
|
u8 value, int *error)
|
|
{
|
|
if (*error)
|
|
return *error;
|
|
|
|
*error = adv748x_write(state, page, reg, value);
|
|
return *error;
|
|
}
|
|
|
|
/* adv748x_write_block(): Write raw data with a maximum of I2C_SMBUS_BLOCK_MAX
|
|
* size to one or more registers.
|
|
*
|
|
* A value of zero will be returned on success, a negative errno will
|
|
* be returned in error cases.
|
|
*/
|
|
int adv748x_write_block(struct adv748x_state *state, int client_page,
|
|
unsigned int init_reg, const void *val,
|
|
size_t val_len)
|
|
{
|
|
struct regmap *regmap = state->regmap[client_page];
|
|
|
|
if (val_len > I2C_SMBUS_BLOCK_MAX)
|
|
val_len = I2C_SMBUS_BLOCK_MAX;
|
|
|
|
return regmap_raw_write(regmap, init_reg, val, val_len);
|
|
}
|
|
|
|
static int adv748x_set_slave_addresses(struct adv748x_state *state)
|
|
{
|
|
struct i2c_client *client;
|
|
unsigned int i;
|
|
u8 io_reg;
|
|
|
|
for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
|
|
io_reg = ADV748X_IO_SLAVE_ADDR_BASE + i;
|
|
client = state->i2c_clients[i];
|
|
|
|
io_write(state, io_reg, client->addr << 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void adv748x_unregister_clients(struct adv748x_state *state)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(state->i2c_clients); ++i)
|
|
i2c_unregister_device(state->i2c_clients[i]);
|
|
}
|
|
|
|
static int adv748x_initialise_clients(struct adv748x_state *state)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
|
|
state->i2c_clients[i] = i2c_new_ancillary_device(
|
|
state->client,
|
|
adv748x_default_addresses[i].name,
|
|
adv748x_default_addresses[i].default_addr);
|
|
|
|
if (IS_ERR(state->i2c_clients[i])) {
|
|
adv_err(state, "failed to create i2c client %u\n", i);
|
|
return PTR_ERR(state->i2c_clients[i]);
|
|
}
|
|
|
|
ret = adv748x_configure_regmap(state, i);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* struct adv748x_reg_value - Register write instruction
|
|
* @page: Regmap page identifier
|
|
* @reg: I2C register
|
|
* @value: value to write to @page at @reg
|
|
*/
|
|
struct adv748x_reg_value {
|
|
u8 page;
|
|
u8 reg;
|
|
u8 value;
|
|
};
|
|
|
|
static int adv748x_write_regs(struct adv748x_state *state,
|
|
const struct adv748x_reg_value *regs)
|
|
{
|
|
int ret;
|
|
|
|
for (; regs->page != ADV748X_PAGE_EOR; regs++) {
|
|
ret = adv748x_write(state, regs->page, regs->reg, regs->value);
|
|
if (ret < 0) {
|
|
adv_err(state, "Error regs page: 0x%02x reg: 0x%02x\n",
|
|
regs->page, regs->reg);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* TXA and TXB
|
|
*/
|
|
|
|
static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
|
|
{
|
|
struct adv748x_state *state = tx->state;
|
|
u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
|
|
int ret = 0;
|
|
|
|
/* Enable n-lane MIPI */
|
|
adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
|
|
|
|
/* Set Auto DPHY Timing */
|
|
adv748x_write_check(state, page, 0x00, 0xa0 | tx->active_lanes, &ret);
|
|
|
|
/* ADI Required Write */
|
|
if (tx->src == &state->hdmi.sd) {
|
|
adv748x_write_check(state, page, 0xdb, 0x10, &ret);
|
|
adv748x_write_check(state, page, 0xd6, 0x07, &ret);
|
|
} else {
|
|
adv748x_write_check(state, page, 0xd2, 0x40, &ret);
|
|
}
|
|
|
|
adv748x_write_check(state, page, 0xc4, 0x0a, &ret);
|
|
adv748x_write_check(state, page, 0x71, 0x33, &ret);
|
|
adv748x_write_check(state, page, 0x72, 0x11, &ret);
|
|
|
|
/* i2c_dphy_pwdn - 1'b0 */
|
|
adv748x_write_check(state, page, 0xf0, 0x00, &ret);
|
|
|
|
/* ADI Required Writes*/
|
|
adv748x_write_check(state, page, 0x31, 0x82, &ret);
|
|
adv748x_write_check(state, page, 0x1e, 0x40, &ret);
|
|
|
|
/* i2c_mipi_pll_en - 1'b1 */
|
|
adv748x_write_check(state, page, 0xda, 0x01, &ret);
|
|
usleep_range(2000, 2500);
|
|
|
|
/* Power-up CSI-TX */
|
|
adv748x_write_check(state, page, 0x00, 0x20 | tx->active_lanes, &ret);
|
|
usleep_range(1000, 1500);
|
|
|
|
/* ADI Required Writes */
|
|
adv748x_write_check(state, page, 0xc1, 0x2b, &ret);
|
|
usleep_range(1000, 1500);
|
|
adv748x_write_check(state, page, 0x31, 0x80, &ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
|
|
{
|
|
struct adv748x_state *state = tx->state;
|
|
u8 page = is_txa(tx) ? ADV748X_PAGE_TXA : ADV748X_PAGE_TXB;
|
|
int ret = 0;
|
|
|
|
/* ADI Required Writes */
|
|
adv748x_write_check(state, page, 0x31, 0x82, &ret);
|
|
adv748x_write_check(state, page, 0x1e, 0x00, &ret);
|
|
|
|
/* Enable n-lane MIPI */
|
|
adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
|
|
|
|
/* i2c_mipi_pll_en - 1'b1 */
|
|
adv748x_write_check(state, page, 0xda, 0x01, &ret);
|
|
|
|
/* ADI Required Write */
|
|
adv748x_write_check(state, page, 0xc1, 0x3b, &ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
|
|
{
|
|
int val;
|
|
|
|
if (!is_tx_enabled(tx))
|
|
return 0;
|
|
|
|
val = tx_read(tx, ADV748X_CSI_FS_AS_LS);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
/*
|
|
* This test against BIT(6) is not documented by the datasheet, but was
|
|
* specified in the downstream driver.
|
|
* Track with a WARN_ONCE to determine if it is ever set by HW.
|
|
*/
|
|
WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
|
|
"Enabling with unknown bit set");
|
|
|
|
return on ? adv748x_power_up_tx(tx) : adv748x_power_down_tx(tx);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Media Operations
|
|
*/
|
|
static int adv748x_link_setup(struct media_entity *entity,
|
|
const struct media_pad *local,
|
|
const struct media_pad *remote, u32 flags)
|
|
{
|
|
struct v4l2_subdev *rsd = media_entity_to_v4l2_subdev(remote->entity);
|
|
struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
|
|
struct adv748x_state *state = v4l2_get_subdevdata(sd);
|
|
struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
|
|
bool enable = flags & MEDIA_LNK_FL_ENABLED;
|
|
u8 io10_mask = ADV748X_IO_10_CSI1_EN |
|
|
ADV748X_IO_10_CSI4_EN |
|
|
ADV748X_IO_10_CSI4_IN_SEL_AFE;
|
|
u8 io10 = 0;
|
|
|
|
/* Refuse to enable multiple links to the same TX at the same time. */
|
|
if (enable && tx->src)
|
|
return -EINVAL;
|
|
|
|
/* Set or clear the source (HDMI or AFE) and the current TX. */
|
|
if (rsd == &state->afe.sd)
|
|
state->afe.tx = enable ? tx : NULL;
|
|
else
|
|
state->hdmi.tx = enable ? tx : NULL;
|
|
|
|
tx->src = enable ? rsd : NULL;
|
|
|
|
if (state->afe.tx) {
|
|
/* AFE Requires TXA enabled, even when output to TXB */
|
|
io10 |= ADV748X_IO_10_CSI4_EN;
|
|
if (is_txa(tx)) {
|
|
/*
|
|
* Output from the SD-core (480i and 576i) from the TXA
|
|
* interface requires reducing the number of enabled
|
|
* data lanes in order to guarantee a valid link
|
|
* frequency.
|
|
*/
|
|
tx->active_lanes = min(tx->num_lanes, 2U);
|
|
io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE;
|
|
} else {
|
|
/* TXB has a single data lane, no need to adjust. */
|
|
io10 |= ADV748X_IO_10_CSI1_EN;
|
|
}
|
|
}
|
|
|
|
if (state->hdmi.tx) {
|
|
/*
|
|
* Restore the number of active lanes, in case we have gone
|
|
* through an AFE->TXA streaming sessions.
|
|
*/
|
|
tx->active_lanes = tx->num_lanes;
|
|
io10 |= ADV748X_IO_10_CSI4_EN;
|
|
}
|
|
|
|
return io_clrset(state, ADV748X_IO_10, io10_mask, io10);
|
|
}
|
|
|
|
static const struct media_entity_operations adv748x_tx_media_ops = {
|
|
.link_setup = adv748x_link_setup,
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct media_entity_operations adv748x_media_ops = {
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* HW setup
|
|
*/
|
|
|
|
/* Initialize CP Core with RGB888 format. */
|
|
static const struct adv748x_reg_value adv748x_init_hdmi[] = {
|
|
/* Disable chip powerdown & Enable HDMI Rx block */
|
|
{ADV748X_PAGE_IO, 0x00, 0x40},
|
|
|
|
{ADV748X_PAGE_REPEATER, 0x40, 0x83}, /* Enable HDCP 1.1 */
|
|
|
|
{ADV748X_PAGE_HDMI, 0x00, 0x08},/* Foreground Channel = A */
|
|
{ADV748X_PAGE_HDMI, 0x98, 0xff},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x99, 0xa3},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x9a, 0x00},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x9b, 0x0a},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x9d, 0x40},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0xcb, 0x09},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x3d, 0x10},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x3e, 0x7b},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x3f, 0x5e},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x4e, 0xfe},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x4f, 0x18},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x57, 0xa3},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x58, 0x04},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0x85, 0x10},/* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_HDMI, 0x83, 0x00},/* Enable All Terminations */
|
|
{ADV748X_PAGE_HDMI, 0xa3, 0x01},/* ADI Required Write */
|
|
{ADV748X_PAGE_HDMI, 0xbe, 0x00},/* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_HDMI, 0x6c, 0x01},/* HPA Manual Enable */
|
|
{ADV748X_PAGE_HDMI, 0xf8, 0x01},/* HPA Asserted */
|
|
{ADV748X_PAGE_HDMI, 0x0f, 0x00},/* Audio Mute Speed Set to Fastest */
|
|
/* (Smallest Step Size) */
|
|
|
|
{ADV748X_PAGE_IO, 0x04, 0x02}, /* RGB Out of CP */
|
|
{ADV748X_PAGE_IO, 0x12, 0xf0}, /* CSC Depends on ip Packets, SDR 444 */
|
|
{ADV748X_PAGE_IO, 0x17, 0x80}, /* Luma & Chroma can reach 254d */
|
|
{ADV748X_PAGE_IO, 0x03, 0x86}, /* CP-Insert_AV_Code */
|
|
|
|
{ADV748X_PAGE_CP, 0x7c, 0x00}, /* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_IO, 0x0c, 0xe0}, /* Enable LLC_DLL & Double LLC Timing */
|
|
{ADV748X_PAGE_IO, 0x0e, 0xdd}, /* LLC/PIX/SPI PINS TRISTATED AUD */
|
|
|
|
{ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
|
|
};
|
|
|
|
/* Initialize AFE core with YUV8 format. */
|
|
static const struct adv748x_reg_value adv748x_init_afe[] = {
|
|
{ADV748X_PAGE_IO, 0x00, 0x30}, /* Disable chip powerdown Rx */
|
|
{ADV748X_PAGE_IO, 0xf2, 0x01}, /* Enable I2C Read Auto-Increment */
|
|
|
|
{ADV748X_PAGE_IO, 0x0e, 0xff}, /* LLC/PIX/AUD/SPI PINS TRISTATED */
|
|
|
|
{ADV748X_PAGE_SDP, 0x0f, 0x00}, /* Exit Power Down Mode */
|
|
{ADV748X_PAGE_SDP, 0x52, 0xcd}, /* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_SDP, 0x0e, 0x80}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0x9c, 0x00}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0x9c, 0xff}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0x0e, 0x00}, /* ADI Required Write */
|
|
|
|
/* ADI recommended writes for improved video quality */
|
|
{ADV748X_PAGE_SDP, 0x80, 0x51}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0x81, 0x51}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0x82, 0x68}, /* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_SDP, 0x03, 0x42}, /* Tri-S Output , PwrDwn 656 pads */
|
|
{ADV748X_PAGE_SDP, 0x04, 0xb5}, /* ITU-R BT.656-4 compatible */
|
|
{ADV748X_PAGE_SDP, 0x13, 0x00}, /* ADI Required Write */
|
|
|
|
{ADV748X_PAGE_SDP, 0x17, 0x41}, /* Select SH1 */
|
|
{ADV748X_PAGE_SDP, 0x31, 0x12}, /* ADI Required Write */
|
|
{ADV748X_PAGE_SDP, 0xe6, 0x4f}, /* V bit end pos manually in NTSC */
|
|
|
|
{ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
|
|
};
|
|
|
|
static int adv748x_sw_reset(struct adv748x_state *state)
|
|
{
|
|
int ret;
|
|
|
|
ret = io_write(state, ADV748X_IO_REG_FF, ADV748X_IO_REG_FF_MAIN_RESET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(5000, 6000);
|
|
|
|
/* Disable CEC Wakeup from power-down mode */
|
|
ret = io_clrset(state, ADV748X_IO_REG_01, ADV748X_IO_REG_01_PWRDN_MASK,
|
|
ADV748X_IO_REG_01_PWRDNB);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable I2C Read Auto-Increment for consecutive reads */
|
|
return io_write(state, ADV748X_IO_REG_F2,
|
|
ADV748X_IO_REG_F2_READ_AUTO_INC);
|
|
}
|
|
|
|
static int adv748x_reset(struct adv748x_state *state)
|
|
{
|
|
int ret;
|
|
u8 regval = 0;
|
|
|
|
ret = adv748x_sw_reset(state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = adv748x_set_slave_addresses(state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Initialize CP and AFE cores. */
|
|
ret = adv748x_write_regs(state, adv748x_init_hdmi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adv748x_write_regs(state, adv748x_init_afe);
|
|
if (ret)
|
|
return ret;
|
|
|
|
adv748x_afe_s_input(&state->afe, state->afe.input);
|
|
|
|
adv_dbg(state, "AFE Default input set to %d\n", state->afe.input);
|
|
|
|
/* Reset TXA and TXB */
|
|
adv748x_tx_power(&state->txa, 1);
|
|
adv748x_tx_power(&state->txa, 0);
|
|
adv748x_tx_power(&state->txb, 1);
|
|
adv748x_tx_power(&state->txb, 0);
|
|
|
|
/* Disable chip powerdown & Enable HDMI Rx block */
|
|
io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
|
|
|
|
/* Conditionally enable TXa and TXb. */
|
|
if (is_tx_enabled(&state->txa)) {
|
|
regval |= ADV748X_IO_10_CSI4_EN;
|
|
adv748x_csi2_set_virtual_channel(&state->txa, 0);
|
|
}
|
|
if (is_tx_enabled(&state->txb)) {
|
|
regval |= ADV748X_IO_10_CSI1_EN;
|
|
adv748x_csi2_set_virtual_channel(&state->txb, 0);
|
|
}
|
|
io_write(state, ADV748X_IO_10, regval);
|
|
|
|
/* Use vid_std and v_freq as freerun resolution for CP */
|
|
cp_clrset(state, ADV748X_CP_CLMP_POS, ADV748X_CP_CLMP_POS_DIS_AUTO,
|
|
ADV748X_CP_CLMP_POS_DIS_AUTO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_identify_chip(struct adv748x_state *state)
|
|
{
|
|
int msb, lsb;
|
|
|
|
lsb = io_read(state, ADV748X_IO_CHIP_REV_ID_1);
|
|
msb = io_read(state, ADV748X_IO_CHIP_REV_ID_2);
|
|
|
|
if (lsb < 0 || msb < 0) {
|
|
adv_err(state, "Failed to read chip revision\n");
|
|
return -EIO;
|
|
}
|
|
|
|
adv_info(state, "chip found @ 0x%02x revision %02x%02x\n",
|
|
state->client->addr << 1, lsb, msb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Suspend / Resume
|
|
*/
|
|
|
|
static int __maybe_unused adv748x_resume_early(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct adv748x_state *state = i2c_get_clientdata(client);
|
|
|
|
return adv748x_reset(state);
|
|
}
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* i2c driver
|
|
*/
|
|
|
|
void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
|
|
const struct v4l2_subdev_ops *ops, u32 function,
|
|
const char *ident)
|
|
{
|
|
v4l2_subdev_init(sd, ops);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
|
|
/* the owner is the same as the i2c_client's driver owner */
|
|
sd->owner = state->dev->driver->owner;
|
|
sd->dev = state->dev;
|
|
|
|
v4l2_set_subdevdata(sd, state);
|
|
|
|
/* initialize name */
|
|
snprintf(sd->name, sizeof(sd->name), "%s %d-%04x %s",
|
|
state->dev->driver->name,
|
|
i2c_adapter_id(state->client->adapter),
|
|
state->client->addr, ident);
|
|
|
|
sd->entity.function = function;
|
|
sd->entity.ops = is_tx(adv748x_sd_to_csi2(sd)) ?
|
|
&adv748x_tx_media_ops : &adv748x_media_ops;
|
|
}
|
|
|
|
static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
|
|
unsigned int port,
|
|
struct device_node *ep)
|
|
{
|
|
struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
|
|
unsigned int num_lanes;
|
|
int ret;
|
|
|
|
if (port != ADV748X_PORT_TXA && port != ADV748X_PORT_TXB)
|
|
return 0;
|
|
|
|
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &vep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
num_lanes = vep.bus.mipi_csi2.num_data_lanes;
|
|
|
|
if (vep.base.port == ADV748X_PORT_TXA) {
|
|
if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4) {
|
|
adv_err(state, "TXA: Invalid number (%u) of lanes\n",
|
|
num_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
state->txa.num_lanes = num_lanes;
|
|
state->txa.active_lanes = num_lanes;
|
|
adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
|
|
}
|
|
|
|
if (vep.base.port == ADV748X_PORT_TXB) {
|
|
if (num_lanes != 1) {
|
|
adv_err(state, "TXB: Invalid number (%u) of lanes\n",
|
|
num_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
state->txb.num_lanes = num_lanes;
|
|
state->txb.active_lanes = num_lanes;
|
|
adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adv748x_parse_dt(struct adv748x_state *state)
|
|
{
|
|
struct device_node *ep_np = NULL;
|
|
struct of_endpoint ep;
|
|
bool out_found = false;
|
|
bool in_found = false;
|
|
int ret;
|
|
|
|
for_each_endpoint_of_node(state->dev->of_node, ep_np) {
|
|
of_graph_parse_endpoint(ep_np, &ep);
|
|
adv_info(state, "Endpoint %pOF on port %d", ep.local_node,
|
|
ep.port);
|
|
|
|
if (ep.port >= ADV748X_PORT_MAX) {
|
|
adv_err(state, "Invalid endpoint %pOF on port %d",
|
|
ep.local_node, ep.port);
|
|
|
|
continue;
|
|
}
|
|
|
|
if (state->endpoints[ep.port]) {
|
|
adv_err(state,
|
|
"Multiple port endpoints are not supported");
|
|
continue;
|
|
}
|
|
|
|
of_node_get(ep_np);
|
|
state->endpoints[ep.port] = ep_np;
|
|
|
|
/*
|
|
* At least one input endpoint and one output endpoint shall
|
|
* be defined.
|
|
*/
|
|
if (ep.port < ADV748X_PORT_TXA)
|
|
in_found = true;
|
|
else
|
|
out_found = true;
|
|
|
|
/* Store number of CSI-2 lanes used for TXA and TXB. */
|
|
ret = adv748x_parse_csi2_lanes(state, ep.port, ep_np);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return in_found && out_found ? 0 : -ENODEV;
|
|
}
|
|
|
|
static void adv748x_dt_cleanup(struct adv748x_state *state)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ADV748X_PORT_MAX; i++)
|
|
of_node_put(state->endpoints[i]);
|
|
}
|
|
|
|
static int adv748x_probe(struct i2c_client *client)
|
|
{
|
|
struct adv748x_state *state;
|
|
int ret;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&state->mutex);
|
|
|
|
state->dev = &client->dev;
|
|
state->client = client;
|
|
state->i2c_clients[ADV748X_PAGE_IO] = client;
|
|
i2c_set_clientdata(client, state);
|
|
|
|
/*
|
|
* We can not use container_of to get back to the state with two TXs;
|
|
* Initialize the TXs's fields unconditionally on the endpoint
|
|
* presence to access them later.
|
|
*/
|
|
state->txa.state = state->txb.state = state;
|
|
state->txa.page = ADV748X_PAGE_TXA;
|
|
state->txb.page = ADV748X_PAGE_TXB;
|
|
state->txa.port = ADV748X_PORT_TXA;
|
|
state->txb.port = ADV748X_PORT_TXB;
|
|
|
|
/* Discover and process ports declared by the Device tree endpoints */
|
|
ret = adv748x_parse_dt(state);
|
|
if (ret) {
|
|
adv_err(state, "Failed to parse device tree");
|
|
goto err_free_mutex;
|
|
}
|
|
|
|
/* Configure IO Regmap region */
|
|
ret = adv748x_configure_regmap(state, ADV748X_PAGE_IO);
|
|
if (ret) {
|
|
adv_err(state, "Error configuring IO regmap region");
|
|
goto err_cleanup_dt;
|
|
}
|
|
|
|
ret = adv748x_identify_chip(state);
|
|
if (ret) {
|
|
adv_err(state, "Failed to identify chip");
|
|
goto err_cleanup_dt;
|
|
}
|
|
|
|
/* Configure remaining pages as I2C clients with regmap access */
|
|
ret = adv748x_initialise_clients(state);
|
|
if (ret) {
|
|
adv_err(state, "Failed to setup client regmap pages");
|
|
goto err_cleanup_clients;
|
|
}
|
|
|
|
/* SW reset ADV748X to its default values */
|
|
ret = adv748x_reset(state);
|
|
if (ret) {
|
|
adv_err(state, "Failed to reset hardware");
|
|
goto err_cleanup_clients;
|
|
}
|
|
|
|
/* Initialise HDMI */
|
|
ret = adv748x_hdmi_init(&state->hdmi);
|
|
if (ret) {
|
|
adv_err(state, "Failed to probe HDMI");
|
|
goto err_cleanup_clients;
|
|
}
|
|
|
|
/* Initialise AFE */
|
|
ret = adv748x_afe_init(&state->afe);
|
|
if (ret) {
|
|
adv_err(state, "Failed to probe AFE");
|
|
goto err_cleanup_hdmi;
|
|
}
|
|
|
|
/* Initialise TXA */
|
|
ret = adv748x_csi2_init(state, &state->txa);
|
|
if (ret) {
|
|
adv_err(state, "Failed to probe TXA");
|
|
goto err_cleanup_afe;
|
|
}
|
|
|
|
/* Initialise TXB */
|
|
ret = adv748x_csi2_init(state, &state->txb);
|
|
if (ret) {
|
|
adv_err(state, "Failed to probe TXB");
|
|
goto err_cleanup_txa;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_cleanup_txa:
|
|
adv748x_csi2_cleanup(&state->txa);
|
|
err_cleanup_afe:
|
|
adv748x_afe_cleanup(&state->afe);
|
|
err_cleanup_hdmi:
|
|
adv748x_hdmi_cleanup(&state->hdmi);
|
|
err_cleanup_clients:
|
|
adv748x_unregister_clients(state);
|
|
err_cleanup_dt:
|
|
adv748x_dt_cleanup(state);
|
|
err_free_mutex:
|
|
mutex_destroy(&state->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void adv748x_remove(struct i2c_client *client)
|
|
{
|
|
struct adv748x_state *state = i2c_get_clientdata(client);
|
|
|
|
adv748x_afe_cleanup(&state->afe);
|
|
adv748x_hdmi_cleanup(&state->hdmi);
|
|
|
|
adv748x_csi2_cleanup(&state->txa);
|
|
adv748x_csi2_cleanup(&state->txb);
|
|
|
|
adv748x_unregister_clients(state);
|
|
adv748x_dt_cleanup(state);
|
|
mutex_destroy(&state->mutex);
|
|
}
|
|
|
|
static const struct of_device_id adv748x_of_table[] = {
|
|
{ .compatible = "adi,adv7481", },
|
|
{ .compatible = "adi,adv7482", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adv748x_of_table);
|
|
|
|
static const struct dev_pm_ops adv748x_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, adv748x_resume_early)
|
|
};
|
|
|
|
static struct i2c_driver adv748x_driver = {
|
|
.driver = {
|
|
.name = "adv748x",
|
|
.of_match_table = adv748x_of_table,
|
|
.pm = &adv748x_pm_ops,
|
|
},
|
|
.probe = adv748x_probe,
|
|
.remove = adv748x_remove,
|
|
};
|
|
|
|
module_i2c_driver(adv748x_driver);
|
|
|
|
MODULE_AUTHOR("Kieran Bingham <kieran.bingham@ideasonboard.com>");
|
|
MODULE_DESCRIPTION("ADV748X video decoder");
|
|
MODULE_LICENSE("GPL");
|