1
linux/drivers/iio/adc/max1241.c
Jonathan Cameron 09e3bdfe49 iio: adc: standardize on formatting for id match tables
This is a frequent minor comment in reviews, so start cleaning up
existing drivers in the hope we get fewer cases of cut and paste.

There are not kernel wide rules for these, but for IIO the style
that I prefer (and hence most common) is:

- Space after { and before }
- No comma after terminator { }

This may cause merge conflicts but they should be trivial to resolve
hence I have not broken this into per driver patches.

Link: https://patch.msgid.link/20240818180912.719399-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-05 19:27:13 +01:00

202 lines
4.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* MAX1241 low-power, 12-bit serial ADC
*
* Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#define MAX1241_VAL_MASK GENMASK(11, 0)
#define MAX1241_SHUTDOWN_DELAY_USEC 4
enum max1241_id {
max1241,
};
struct max1241 {
struct spi_device *spi;
struct mutex lock;
struct regulator *vref;
struct gpio_desc *shutdown;
__be16 data __aligned(IIO_DMA_MINALIGN);
};
static const struct iio_chan_spec max1241_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
},
};
static int max1241_read(struct max1241 *adc)
{
struct spi_transfer xfers[] = {
/*
* Begin conversion by bringing /CS low for at least
* tconv us.
*/
{
.len = 0,
.delay.value = 8,
.delay.unit = SPI_DELAY_UNIT_USECS,
},
/*
* Then read two bytes of data in our RX buffer.
*/
{
.rx_buf = &adc->data,
.len = 2,
},
};
return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
}
static int max1241_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
int ret, vref_uV;
struct max1241 *adc = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&adc->lock);
if (adc->shutdown) {
gpiod_set_value(adc->shutdown, 0);
udelay(MAX1241_SHUTDOWN_DELAY_USEC);
ret = max1241_read(adc);
gpiod_set_value(adc->shutdown, 1);
} else
ret = max1241_read(adc);
if (ret) {
mutex_unlock(&adc->lock);
return ret;
}
*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
mutex_unlock(&adc->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
vref_uV = regulator_get_voltage(adc->vref);
if (vref_uV < 0)
return vref_uV;
*val = vref_uV / 1000;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static const struct iio_info max1241_info = {
.read_raw = max1241_read_raw,
};
static void max1241_disable_vref_action(void *data)
{
struct max1241 *adc = data;
struct device *dev = &adc->spi->dev;
int err;
err = regulator_disable(adc->vref);
if (err)
dev_err(dev, "could not disable vref regulator.\n");
}
static int max1241_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct iio_dev *indio_dev;
struct max1241 *adc;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
if (!indio_dev)
return -ENOMEM;
adc = iio_priv(indio_dev);
adc->spi = spi;
mutex_init(&adc->lock);
ret = devm_regulator_get_enable(dev, "vdd");
if (ret)
return dev_err_probe(dev, ret,
"failed to get/enable vdd regulator\n");
adc->vref = devm_regulator_get(dev, "vref");
if (IS_ERR(adc->vref))
return dev_err_probe(dev, PTR_ERR(adc->vref),
"failed to get vref regulator\n");
ret = regulator_enable(adc->vref);
if (ret)
return ret;
ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
if (ret) {
dev_err(dev, "could not set up vref regulator cleanup action\n");
return ret;
}
adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
GPIOD_OUT_HIGH);
if (IS_ERR(adc->shutdown))
return dev_err_probe(dev, PTR_ERR(adc->shutdown),
"cannot get shutdown gpio\n");
if (adc->shutdown)
dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
else
dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->info = &max1241_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = max1241_channels;
indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
return devm_iio_device_register(dev, indio_dev);
}
static const struct spi_device_id max1241_id[] = {
{ "max1241", max1241 },
{ }
};
static const struct of_device_id max1241_dt_ids[] = {
{ .compatible = "maxim,max1241" },
{ }
};
MODULE_DEVICE_TABLE(of, max1241_dt_ids);
static struct spi_driver max1241_spi_driver = {
.driver = {
.name = "max1241",
.of_match_table = max1241_dt_ids,
},
.probe = max1241_probe,
.id_table = max1241_id,
};
module_spi_driver(max1241_spi_driver);
MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
MODULE_DESCRIPTION("MAX1241 ADC driver");
MODULE_LICENSE("GPL v2");