1
linux/drivers/iio/accel/dmard06.c
Uwe Kleine-König 4391affa10 iio: Drop explicit initialization of struct i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072928.2135858-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-05-27 09:48:57 +01:00

233 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* IIO driver for Domintech DMARD06 accelerometer
*
* Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com>
*/
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#define DMARD06_DRV_NAME "dmard06"
/* Device data registers */
#define DMARD06_CHIP_ID_REG 0x0f
#define DMARD06_TOUT_REG 0x40
#define DMARD06_XOUT_REG 0x41
#define DMARD06_YOUT_REG 0x42
#define DMARD06_ZOUT_REG 0x43
#define DMARD06_CTRL1_REG 0x44
/* Device ID value */
#define DMARD05_CHIP_ID 0x05
#define DMARD06_CHIP_ID 0x06
#define DMARD07_CHIP_ID 0x07
/* Device values */
#define DMARD05_AXIS_SCALE_VAL 15625
#define DMARD06_AXIS_SCALE_VAL 31250
#define DMARD06_TEMP_CENTER_VAL 25
#define DMARD06_SIGN_BIT 7
/* Device power modes */
#define DMARD06_MODE_NORMAL 0x27
#define DMARD06_MODE_POWERDOWN 0x00
/* Device channels */
#define DMARD06_ACCEL_CHANNEL(_axis, _reg) { \
.type = IIO_ACCEL, \
.address = _reg, \
.channel2 = IIO_MOD_##_axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.modified = 1, \
}
#define DMARD06_TEMP_CHANNEL(_reg) { \
.type = IIO_TEMP, \
.address = _reg, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_OFFSET), \
}
struct dmard06_data {
struct i2c_client *client;
u8 chip_id;
};
static const struct iio_chan_spec dmard06_channels[] = {
DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG),
DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG),
DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG),
DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG),
};
static int dmard06_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct dmard06_data *dmard06 = iio_priv(indio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_smbus_read_byte_data(dmard06->client,
chan->address);
if (ret < 0) {
dev_err(&dmard06->client->dev,
"Error reading data: %d\n", ret);
return ret;
}
*val = sign_extend32(ret, DMARD06_SIGN_BIT);
if (dmard06->chip_id == DMARD06_CHIP_ID)
*val = *val >> 1;
switch (chan->type) {
case IIO_ACCEL:
return IIO_VAL_INT;
case IIO_TEMP:
if (dmard06->chip_id != DMARD06_CHIP_ID)
*val = *val / 2;
return IIO_VAL_INT;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
*val = DMARD06_TEMP_CENTER_VAL;
return IIO_VAL_INT;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_ACCEL:
*val = 0;
if (dmard06->chip_id == DMARD06_CHIP_ID)
*val2 = DMARD06_AXIS_SCALE_VAL;
else
*val2 = DMARD05_AXIS_SCALE_VAL;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
default:
return -EINVAL;
}
}
static const struct iio_info dmard06_info = {
.read_raw = dmard06_read_raw,
};
static int dmard06_probe(struct i2c_client *client)
{
int ret;
struct iio_dev *indio_dev;
struct dmard06_data *dmard06;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "I2C check functionality failed\n");
return -ENXIO;
}
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06));
if (!indio_dev) {
dev_err(&client->dev, "Failed to allocate iio device\n");
return -ENOMEM;
}
dmard06 = iio_priv(indio_dev);
dmard06->client = client;
ret = i2c_smbus_read_byte_data(dmard06->client, DMARD06_CHIP_ID_REG);
if (ret < 0) {
dev_err(&client->dev, "Error reading chip id: %d\n", ret);
return ret;
}
if (ret != DMARD05_CHIP_ID && ret != DMARD06_CHIP_ID &&
ret != DMARD07_CHIP_ID) {
dev_err(&client->dev, "Invalid chip id: %02d\n", ret);
return -ENODEV;
}
dmard06->chip_id = ret;
i2c_set_clientdata(client, indio_dev);
indio_dev->name = DMARD06_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = dmard06_channels;
indio_dev->num_channels = ARRAY_SIZE(dmard06_channels);
indio_dev->info = &dmard06_info;
return devm_iio_device_register(&client->dev, indio_dev);
}
static int dmard06_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct dmard06_data *dmard06 = iio_priv(indio_dev);
int ret;
ret = i2c_smbus_write_byte_data(dmard06->client, DMARD06_CTRL1_REG,
DMARD06_MODE_POWERDOWN);
if (ret < 0)
return ret;
return 0;
}
static int dmard06_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct dmard06_data *dmard06 = iio_priv(indio_dev);
int ret;
ret = i2c_smbus_write_byte_data(dmard06->client, DMARD06_CTRL1_REG,
DMARD06_MODE_NORMAL);
if (ret < 0)
return ret;
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(dmard06_pm_ops, dmard06_suspend,
dmard06_resume);
static const struct i2c_device_id dmard06_id[] = {
{ "dmard05" },
{ "dmard06" },
{ "dmard07" },
{ }
};
MODULE_DEVICE_TABLE(i2c, dmard06_id);
static const struct of_device_id dmard06_of_match[] = {
{ .compatible = "domintech,dmard05" },
{ .compatible = "domintech,dmard06" },
{ .compatible = "domintech,dmard07" },
{ }
};
MODULE_DEVICE_TABLE(of, dmard06_of_match);
static struct i2c_driver dmard06_driver = {
.probe = dmard06_probe,
.id_table = dmard06_id,
.driver = {
.name = DMARD06_DRV_NAME,
.of_match_table = dmard06_of_match,
.pm = pm_sleep_ptr(&dmard06_pm_ops),
},
};
module_i2c_driver(dmard06_driver);
MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>");
MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver");
MODULE_LICENSE("GPL v2");