4da9438d29
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_bulk_get_enable() replaces this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20221016163409.320197-3-jic23@kernel.org
150 lines
4.7 KiB
C
150 lines
4.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* Register constants and other forward declarations needed by the bma400
|
|
* sources.
|
|
*
|
|
* Copyright 2019 Dan Robertson <dan@dlrobertson.com>
|
|
*/
|
|
|
|
#ifndef _BMA400_H_
|
|
#define _BMA400_H_
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* Read-Only Registers
|
|
*/
|
|
|
|
/* Status and ID registers */
|
|
#define BMA400_CHIP_ID_REG 0x00
|
|
#define BMA400_ERR_REG 0x02
|
|
#define BMA400_STATUS_REG 0x03
|
|
|
|
/* Acceleration registers */
|
|
#define BMA400_X_AXIS_LSB_REG 0x04
|
|
#define BMA400_X_AXIS_MSB_REG 0x05
|
|
#define BMA400_Y_AXIS_LSB_REG 0x06
|
|
#define BMA400_Y_AXIS_MSB_REG 0x07
|
|
#define BMA400_Z_AXIS_LSB_REG 0x08
|
|
#define BMA400_Z_AXIS_MSB_REG 0x09
|
|
|
|
/* Sensor time registers */
|
|
#define BMA400_SENSOR_TIME0 0x0a
|
|
#define BMA400_SENSOR_TIME1 0x0b
|
|
#define BMA400_SENSOR_TIME2 0x0c
|
|
|
|
/* Event and interrupt registers */
|
|
#define BMA400_EVENT_REG 0x0d
|
|
#define BMA400_INT_STAT0_REG 0x0e
|
|
#define BMA400_INT_STAT1_REG 0x0f
|
|
#define BMA400_INT_STAT2_REG 0x10
|
|
#define BMA400_INT12_MAP_REG 0x23
|
|
#define BMA400_INT_ENG_OVRUN_MSK BIT(4)
|
|
|
|
/* Temperature register */
|
|
#define BMA400_TEMP_DATA_REG 0x11
|
|
|
|
/* FIFO length and data registers */
|
|
#define BMA400_FIFO_LENGTH0_REG 0x12
|
|
#define BMA400_FIFO_LENGTH1_REG 0x13
|
|
#define BMA400_FIFO_DATA_REG 0x14
|
|
|
|
/* Step count registers */
|
|
#define BMA400_STEP_CNT0_REG 0x15
|
|
#define BMA400_STEP_CNT1_REG 0x16
|
|
#define BMA400_STEP_CNT3_REG 0x17
|
|
#define BMA400_STEP_STAT_REG 0x18
|
|
#define BMA400_STEP_INT_MSK BIT(0)
|
|
#define BMA400_STEP_RAW_LEN 0x03
|
|
#define BMA400_STEP_STAT_MASK GENMASK(9, 8)
|
|
|
|
/*
|
|
* Read-write configuration registers
|
|
*/
|
|
#define BMA400_ACC_CONFIG0_REG 0x19
|
|
#define BMA400_ACC_CONFIG1_REG 0x1a
|
|
#define BMA400_ACC_CONFIG2_REG 0x1b
|
|
#define BMA400_CMD_REG 0x7e
|
|
|
|
/* Interrupt registers */
|
|
#define BMA400_INT_CONFIG0_REG 0x1f
|
|
#define BMA400_INT_CONFIG1_REG 0x20
|
|
#define BMA400_INT1_MAP_REG 0x21
|
|
#define BMA400_INT_IO_CTRL_REG 0x24
|
|
#define BMA400_INT_DRDY_MSK BIT(7)
|
|
|
|
/* Chip ID of BMA 400 devices found in the chip ID register. */
|
|
#define BMA400_ID_REG_VAL 0x90
|
|
|
|
#define BMA400_LP_OSR_SHIFT 5
|
|
#define BMA400_NP_OSR_SHIFT 4
|
|
#define BMA400_SCALE_SHIFT 6
|
|
|
|
#define BMA400_TWO_BITS_MASK GENMASK(1, 0)
|
|
#define BMA400_LP_OSR_MASK GENMASK(6, 5)
|
|
#define BMA400_NP_OSR_MASK GENMASK(5, 4)
|
|
#define BMA400_ACC_ODR_MASK GENMASK(3, 0)
|
|
#define BMA400_ACC_SCALE_MASK GENMASK(7, 6)
|
|
|
|
#define BMA400_ACC_ODR_MIN_RAW 0x05
|
|
#define BMA400_ACC_ODR_LP_RAW 0x06
|
|
#define BMA400_ACC_ODR_MAX_RAW 0x0b
|
|
|
|
#define BMA400_ACC_ODR_MAX_HZ 800
|
|
#define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
|
|
#define BMA400_ACC_ODR_MIN_HZ 12
|
|
|
|
/* Generic interrupts register */
|
|
#define BMA400_GEN1INT_CONFIG0 0x3f
|
|
#define BMA400_GEN2INT_CONFIG0 0x4A
|
|
#define BMA400_GEN_CONFIG1_OFF 0x01
|
|
#define BMA400_GEN_CONFIG2_OFF 0x02
|
|
#define BMA400_GEN_CONFIG3_OFF 0x03
|
|
#define BMA400_GEN_CONFIG31_OFF 0x04
|
|
#define BMA400_INT_GEN1_MSK BIT(2)
|
|
#define BMA400_INT_GEN2_MSK BIT(3)
|
|
#define BMA400_GEN_HYST_MSK GENMASK(1, 0)
|
|
|
|
/* TAP config registers */
|
|
#define BMA400_TAP_CONFIG 0x57
|
|
#define BMA400_TAP_CONFIG1 0x58
|
|
#define BMA400_S_TAP_MSK BIT(2)
|
|
#define BMA400_D_TAP_MSK BIT(3)
|
|
#define BMA400_INT_S_TAP_MSK BIT(10)
|
|
#define BMA400_INT_D_TAP_MSK BIT(11)
|
|
#define BMA400_TAP_SEN_MSK GENMASK(2, 0)
|
|
#define BMA400_TAP_TICSTH_MSK GENMASK(1, 0)
|
|
#define BMA400_TAP_QUIET_MSK GENMASK(3, 2)
|
|
#define BMA400_TAP_QUIETDT_MSK GENMASK(5, 4)
|
|
#define BMA400_TAP_TIM_LIST_LEN 4
|
|
|
|
/*
|
|
* BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
|
|
* converting to micro values for +-2g range.
|
|
*
|
|
* For +-2g - 1 LSB = 0.976562 milli g = 0.009576 m/s^2
|
|
* For +-4g - 1 LSB = 1.953125 milli g = 0.019153 m/s^2
|
|
* For +-16g - 1 LSB = 7.8125 milli g = 0.076614 m/s^2
|
|
*
|
|
* The raw value which is used to select the different ranges is determined
|
|
* by the first bit set position from the scale value, so BMA400_SCALE_MIN
|
|
* should be odd.
|
|
*
|
|
* Scale values for +-2g, +-4g, +-8g and +-16g are populated into bma400_scales
|
|
* array by left shifting BMA400_SCALE_MIN.
|
|
* e.g.:
|
|
* To select +-2g = 9577 << 0 = raw value to write is 0.
|
|
* To select +-8g = 9577 << 2 = raw value to write is 2.
|
|
* To select +-16g = 9577 << 3 = raw value to write is 3.
|
|
*/
|
|
#define BMA400_SCALE_MIN 9577
|
|
#define BMA400_SCALE_MAX 76617
|
|
|
|
extern const struct regmap_config bma400_regmap_config;
|
|
|
|
int bma400_probe(struct device *dev, struct regmap *regmap, int irq,
|
|
const char *name);
|
|
|
|
#endif
|