c37d0f08f8
Use multi-byte regmap operations where possible to reduce code size. No functional changes. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
962 lines
24 KiB
C
962 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* amc6821.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
|
|
*
|
|
* Based on max6650.c:
|
|
* Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
|
|
*
|
|
* Conversion to regmap and with_info API:
|
|
* Copyright (C) 2024 Guenter Roeck <linux@roeck-us.net>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/err.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/minmax.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* Addresses to scan.
|
|
*/
|
|
|
|
static const unsigned short normal_i2c[] = {0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e,
|
|
0x4c, 0x4d, 0x4e, I2C_CLIENT_END};
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
|
|
static int pwminv; /*Inverted PWM output. */
|
|
module_param(pwminv, int, 0444);
|
|
|
|
static int init = 1; /*Power-on initialization.*/
|
|
module_param(init, int, 0444);
|
|
|
|
#define AMC6821_REG_DEV_ID 0x3D
|
|
#define AMC6821_REG_COMP_ID 0x3E
|
|
#define AMC6821_REG_CONF1 0x00
|
|
#define AMC6821_REG_CONF2 0x01
|
|
#define AMC6821_REG_CONF3 0x3F
|
|
#define AMC6821_REG_CONF4 0x04
|
|
#define AMC6821_REG_STAT1 0x02
|
|
#define AMC6821_REG_STAT2 0x03
|
|
#define AMC6821_REG_TEMP_LO 0x06
|
|
#define AMC6821_REG_TDATA_LOW 0x08
|
|
#define AMC6821_REG_TDATA_HI 0x09
|
|
#define AMC6821_REG_LTEMP_HI 0x0A
|
|
#define AMC6821_REG_RTEMP_HI 0x0B
|
|
#define AMC6821_REG_LTEMP_LIMIT_MIN 0x15
|
|
#define AMC6821_REG_LTEMP_LIMIT_MAX 0x14
|
|
#define AMC6821_REG_RTEMP_LIMIT_MIN 0x19
|
|
#define AMC6821_REG_RTEMP_LIMIT_MAX 0x18
|
|
#define AMC6821_REG_LTEMP_CRIT 0x1B
|
|
#define AMC6821_REG_RTEMP_CRIT 0x1D
|
|
#define AMC6821_REG_PSV_TEMP 0x1C
|
|
#define AMC6821_REG_DCY 0x22
|
|
#define AMC6821_REG_LTEMP_FAN_CTRL 0x24
|
|
#define AMC6821_REG_RTEMP_FAN_CTRL 0x25
|
|
#define AMC6821_REG_DCY_LOW_TEMP 0x21
|
|
|
|
#define AMC6821_REG_TACH_LLIMITL 0x10
|
|
#define AMC6821_REG_TACH_HLIMITL 0x12
|
|
#define AMC6821_REG_TACH_SETTINGL 0x1e
|
|
|
|
#define AMC6821_CONF1_START BIT(0)
|
|
#define AMC6821_CONF1_FAN_INT_EN BIT(1)
|
|
#define AMC6821_CONF1_FANIE BIT(2)
|
|
#define AMC6821_CONF1_PWMINV BIT(3)
|
|
#define AMC6821_CONF1_FAN_FAULT_EN BIT(4)
|
|
#define AMC6821_CONF1_FDRC0 BIT(5)
|
|
#define AMC6821_CONF1_FDRC1 BIT(6)
|
|
#define AMC6821_CONF1_THERMOVIE BIT(7)
|
|
|
|
#define AMC6821_CONF2_PWM_EN BIT(0)
|
|
#define AMC6821_CONF2_TACH_MODE BIT(1)
|
|
#define AMC6821_CONF2_TACH_EN BIT(2)
|
|
#define AMC6821_CONF2_RTFIE BIT(3)
|
|
#define AMC6821_CONF2_LTOIE BIT(4)
|
|
#define AMC6821_CONF2_RTOIE BIT(5)
|
|
#define AMC6821_CONF2_PSVIE BIT(6)
|
|
#define AMC6821_CONF2_RST BIT(7)
|
|
|
|
#define AMC6821_CONF3_THERM_FAN_EN BIT(7)
|
|
#define AMC6821_CONF3_REV_MASK GENMASK(3, 0)
|
|
|
|
#define AMC6821_CONF4_OVREN BIT(4)
|
|
#define AMC6821_CONF4_TACH_FAST BIT(5)
|
|
#define AMC6821_CONF4_PSPR BIT(6)
|
|
#define AMC6821_CONF4_MODE BIT(7)
|
|
|
|
#define AMC6821_STAT1_RPM_ALARM BIT(0)
|
|
#define AMC6821_STAT1_FANS BIT(1)
|
|
#define AMC6821_STAT1_RTH BIT(2)
|
|
#define AMC6821_STAT1_RTL BIT(3)
|
|
#define AMC6821_STAT1_R_THERM BIT(4)
|
|
#define AMC6821_STAT1_RTF BIT(5)
|
|
#define AMC6821_STAT1_LTH BIT(6)
|
|
#define AMC6821_STAT1_LTL BIT(7)
|
|
|
|
#define AMC6821_STAT2_RTC BIT(3)
|
|
#define AMC6821_STAT2_LTC BIT(4)
|
|
#define AMC6821_STAT2_LPSV BIT(5)
|
|
#define AMC6821_STAT2_L_THERM BIT(6)
|
|
#define AMC6821_STAT2_THERM_IN BIT(7)
|
|
|
|
#define AMC6821_TEMP_SLOPE_MASK GENMASK(2, 0)
|
|
#define AMC6821_TEMP_LIMIT_MASK GENMASK(7, 3)
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct amc6821_data {
|
|
struct regmap *regmap;
|
|
struct mutex update_lock;
|
|
};
|
|
|
|
/*
|
|
* Return 0 on success or negative error code.
|
|
*
|
|
* temps returns set of three temperatures, in °C:
|
|
* temps[0]: Passive cooling temperature, applies to both channels
|
|
* temps[1]: Low temperature, start slope calculations
|
|
* temps[2]: High temperature
|
|
*
|
|
* Channel 0: local, channel 1: remote.
|
|
*/
|
|
static int amc6821_get_auto_point_temps(struct regmap *regmap, int channel, u8 *temps)
|
|
{
|
|
u32 regs[] = {
|
|
AMC6821_REG_DCY_LOW_TEMP,
|
|
AMC6821_REG_PSV_TEMP,
|
|
channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL
|
|
};
|
|
u8 regvals[3];
|
|
int slope;
|
|
int err;
|
|
|
|
err = regmap_multi_reg_read(regmap, regs, regvals, 3);
|
|
if (err)
|
|
return err;
|
|
temps[0] = regvals[1];
|
|
temps[1] = FIELD_GET(AMC6821_TEMP_LIMIT_MASK, regvals[2]) * 4;
|
|
|
|
/* slope is 32 >> <slope bits> in °C */
|
|
slope = 32 >> FIELD_GET(AMC6821_TEMP_SLOPE_MASK, regvals[2]);
|
|
if (slope)
|
|
temps[2] = temps[1] + DIV_ROUND_CLOSEST(255 - regvals[0], slope);
|
|
else
|
|
temps[2] = 255;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amc6821_temp_read_values(struct regmap *regmap, u32 attr, int channel, long *val)
|
|
{
|
|
int reg, err;
|
|
u32 regval;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
reg = channel ? AMC6821_REG_RTEMP_HI : AMC6821_REG_LTEMP_HI;
|
|
break;
|
|
case hwmon_temp_min:
|
|
reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN;
|
|
break;
|
|
case hwmon_temp_max:
|
|
reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX;
|
|
break;
|
|
case hwmon_temp_crit:
|
|
reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
err = regmap_read(regmap, reg, ®val);
|
|
if (err)
|
|
return err;
|
|
*val = sign_extend32(regval, 7) * 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int amc6821_read_alarms(struct regmap *regmap, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
int reg, mask, err;
|
|
u32 regval;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_min_alarm:
|
|
reg = AMC6821_REG_STAT1;
|
|
mask = channel ? AMC6821_STAT1_RTL : AMC6821_STAT1_LTL;
|
|
break;
|
|
case hwmon_temp_max_alarm:
|
|
reg = AMC6821_REG_STAT1;
|
|
mask = channel ? AMC6821_STAT1_RTH : AMC6821_STAT1_LTH;
|
|
break;
|
|
case hwmon_temp_crit_alarm:
|
|
reg = AMC6821_REG_STAT2;
|
|
mask = channel ? AMC6821_STAT2_RTC : AMC6821_STAT2_LTC;
|
|
break;
|
|
case hwmon_temp_fault:
|
|
reg = AMC6821_REG_STAT1;
|
|
mask = AMC6821_STAT1_RTF;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_fan:
|
|
switch (attr) {
|
|
case hwmon_fan_fault:
|
|
reg = AMC6821_REG_STAT1;
|
|
mask = AMC6821_STAT1_FANS;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
err = regmap_read(regmap, reg, ®val);
|
|
if (err)
|
|
return err;
|
|
*val = !!(regval & mask);
|
|
return 0;
|
|
}
|
|
|
|
static int amc6821_temp_read(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
return amc6821_temp_read_values(data->regmap, attr, channel, val);
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
case hwmon_temp_fault:
|
|
return amc6821_read_alarms(data->regmap, hwmon_temp, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int amc6821_temp_write(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
int reg;
|
|
|
|
val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_min:
|
|
reg = channel ? AMC6821_REG_RTEMP_LIMIT_MIN : AMC6821_REG_LTEMP_LIMIT_MIN;
|
|
break;
|
|
case hwmon_temp_max:
|
|
reg = channel ? AMC6821_REG_RTEMP_LIMIT_MAX : AMC6821_REG_LTEMP_LIMIT_MAX;
|
|
break;
|
|
case hwmon_temp_crit:
|
|
reg = channel ? AMC6821_REG_RTEMP_CRIT : AMC6821_REG_LTEMP_CRIT;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return regmap_write(data->regmap, reg, val);
|
|
}
|
|
|
|
static int amc6821_pwm_read(struct device *dev, u32 attr, long *val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
u32 regval;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_pwm_enable:
|
|
err = regmap_read(regmap, AMC6821_REG_CONF1, ®val);
|
|
if (err)
|
|
return err;
|
|
switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) {
|
|
case 0:
|
|
*val = 1; /* manual */
|
|
break;
|
|
case AMC6821_CONF1_FDRC0:
|
|
*val = 4; /* target rpm (fan1_target) controlled */
|
|
break;
|
|
case AMC6821_CONF1_FDRC1:
|
|
*val = 2; /* remote temp controlled */
|
|
break;
|
|
default:
|
|
*val = 3; /* max(local, remote) temp controlled */
|
|
break;
|
|
}
|
|
return 0;
|
|
case hwmon_pwm_mode:
|
|
err = regmap_read(regmap, AMC6821_REG_CONF2, ®val);
|
|
if (err)
|
|
return err;
|
|
*val = !!(regval & AMC6821_CONF2_TACH_MODE);
|
|
return 0;
|
|
case hwmon_pwm_auto_channels_temp:
|
|
err = regmap_read(regmap, AMC6821_REG_CONF1, ®val);
|
|
if (err)
|
|
return err;
|
|
switch (regval & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) {
|
|
case 0:
|
|
case AMC6821_CONF1_FDRC0:
|
|
*val = 0; /* manual or target rpm controlled */
|
|
break;
|
|
case AMC6821_CONF1_FDRC1:
|
|
*val = 2; /* remote temp controlled */
|
|
break;
|
|
default:
|
|
*val = 3; /* max(local, remote) temp controlled */
|
|
break;
|
|
}
|
|
return 0;
|
|
case hwmon_pwm_input:
|
|
err = regmap_read(regmap, AMC6821_REG_DCY, ®val);
|
|
if (err)
|
|
return err;
|
|
*val = regval;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int amc6821_pwm_write(struct device *dev, u32 attr, long val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
u32 mode;
|
|
|
|
switch (attr) {
|
|
case hwmon_pwm_enable:
|
|
switch (val) {
|
|
case 1:
|
|
mode = 0;
|
|
break;
|
|
case 2:
|
|
mode = AMC6821_CONF1_FDRC1;
|
|
break;
|
|
case 3:
|
|
mode = AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1;
|
|
break;
|
|
case 4:
|
|
mode = AMC6821_CONF1_FDRC0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return regmap_update_bits(regmap, AMC6821_REG_CONF1,
|
|
AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1,
|
|
mode);
|
|
case hwmon_pwm_mode:
|
|
if (val < 0 || val > 1)
|
|
return -EINVAL;
|
|
return regmap_update_bits(regmap, AMC6821_REG_CONF2,
|
|
AMC6821_CONF2_TACH_MODE,
|
|
val ? AMC6821_CONF2_TACH_MODE : 0);
|
|
break;
|
|
case hwmon_pwm_input:
|
|
if (val < 0 || val > 255)
|
|
return -EINVAL;
|
|
return regmap_write(regmap, AMC6821_REG_DCY, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int amc6821_fan_read_rpm(struct regmap *regmap, u32 attr, long *val)
|
|
{
|
|
int reg, err;
|
|
u8 regs[2];
|
|
u32 regval;
|
|
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
reg = AMC6821_REG_TDATA_LOW;
|
|
break;
|
|
case hwmon_fan_min:
|
|
reg = AMC6821_REG_TACH_LLIMITL;
|
|
break;
|
|
case hwmon_fan_max:
|
|
reg = AMC6821_REG_TACH_HLIMITL;
|
|
break;
|
|
case hwmon_fan_target:
|
|
reg = AMC6821_REG_TACH_SETTINGL;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
err = regmap_bulk_read(regmap, reg, regs, 2);
|
|
if (err)
|
|
return err;
|
|
|
|
regval = (regs[1] << 8) | regs[0];
|
|
*val = regval ? 6000000 / regval : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amc6821_fan_read(struct device *dev, u32 attr, long *val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
u32 regval;
|
|
int err;
|
|
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
case hwmon_fan_min:
|
|
case hwmon_fan_max:
|
|
case hwmon_fan_target:
|
|
return amc6821_fan_read_rpm(regmap, attr, val);
|
|
case hwmon_fan_fault:
|
|
return amc6821_read_alarms(regmap, hwmon_fan, attr, 0, val);
|
|
case hwmon_fan_pulses:
|
|
err = regmap_read(regmap, AMC6821_REG_CONF4, ®val);
|
|
if (err)
|
|
return err;
|
|
*val = (regval & AMC6821_CONF4_PSPR) ? 4 : 2;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int amc6821_fan_write(struct device *dev, u32 attr, long val)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
u8 regs[2];
|
|
int reg;
|
|
|
|
if (attr == hwmon_fan_pulses) {
|
|
if (val != 2 && val != 4)
|
|
return -EINVAL;
|
|
return regmap_update_bits(regmap, AMC6821_REG_CONF4,
|
|
AMC6821_CONF4_PSPR,
|
|
val == 4 ? AMC6821_CONF4_PSPR : 0);
|
|
}
|
|
|
|
if (val < 0)
|
|
return -EINVAL;
|
|
|
|
switch (attr) {
|
|
case hwmon_fan_min:
|
|
if (!val) /* no unlimited minimum speed */
|
|
return -EINVAL;
|
|
reg = AMC6821_REG_TACH_LLIMITL;
|
|
break;
|
|
case hwmon_fan_max:
|
|
reg = AMC6821_REG_TACH_HLIMITL;
|
|
break;
|
|
case hwmon_fan_target:
|
|
if (!val) /* no unlimited target speed */
|
|
return -EINVAL;
|
|
reg = AMC6821_REG_TACH_SETTINGL;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
val = val ? 6000000 / clamp_val(val, 1, 6000000) : 0;
|
|
val = clamp_val(val, 0, 0xffff);
|
|
|
|
regs[0] = val & 0xff;
|
|
regs[1] = val >> 8;
|
|
|
|
return regmap_bulk_write(data->regmap, reg, regs, 2);
|
|
}
|
|
|
|
static ssize_t temp_auto_point_temp_show(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
int ix = to_sensor_dev_attr_2(devattr)->index;
|
|
int nr = to_sensor_dev_attr_2(devattr)->nr;
|
|
u8 temps[3];
|
|
int err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
err = amc6821_get_auto_point_temps(data->regmap, nr, temps);
|
|
mutex_unlock(&data->update_lock);
|
|
if (err)
|
|
return err;
|
|
|
|
return sysfs_emit(buf, "%d\n", temps[ix] * 1000);
|
|
}
|
|
|
|
static ssize_t pwm1_auto_point_pwm_show(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
int ix = to_sensor_dev_attr(devattr)->index;
|
|
u32 val;
|
|
int err;
|
|
|
|
switch (ix) {
|
|
case 0:
|
|
val = 0;
|
|
break;
|
|
case 1:
|
|
err = regmap_read(data->regmap, AMC6821_REG_DCY_LOW_TEMP, &val);
|
|
if (err)
|
|
return err;
|
|
break;
|
|
default:
|
|
val = 255;
|
|
break;
|
|
}
|
|
return sysfs_emit(buf, "%d\n", val);
|
|
}
|
|
|
|
/*
|
|
* Set TEMP[0-4] (low temperature) and SLP[0-2] (slope) of local or remote
|
|
* TEMP-FAN control register.
|
|
*
|
|
* Return 0 on success or negative error code.
|
|
*
|
|
* Channel 0: local, channel 1: remote
|
|
*/
|
|
static inline int set_slope_register(struct regmap *regmap, int channel, u8 *temps)
|
|
{
|
|
u8 regval = FIELD_PREP(AMC6821_TEMP_LIMIT_MASK, temps[1] / 4);
|
|
u8 tmp, dpwm;
|
|
int err, dt;
|
|
u32 pwm;
|
|
|
|
err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm);
|
|
if (err)
|
|
return err;
|
|
|
|
dpwm = 255 - pwm;
|
|
|
|
dt = temps[2] - temps[1];
|
|
for (tmp = 4; tmp > 0; tmp--) {
|
|
if (dt * (32 >> tmp) >= dpwm)
|
|
break;
|
|
}
|
|
regval |= FIELD_PREP(AMC6821_TEMP_SLOPE_MASK, tmp);
|
|
|
|
return regmap_write(regmap,
|
|
channel ? AMC6821_REG_RTEMP_FAN_CTRL : AMC6821_REG_LTEMP_FAN_CTRL,
|
|
regval);
|
|
}
|
|
|
|
static ssize_t temp_auto_point_temp_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
int ix = to_sensor_dev_attr_2(attr)->index;
|
|
int nr = to_sensor_dev_attr_2(attr)->nr;
|
|
struct regmap *regmap = data->regmap;
|
|
u8 temps[3], otemps[3];
|
|
long val;
|
|
int ret;
|
|
|
|
ret = kstrtol(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
ret = amc6821_get_auto_point_temps(data->regmap, nr, temps);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
switch (ix) {
|
|
case 0:
|
|
/*
|
|
* Passive cooling temperature. Range limit against low limit
|
|
* of both channels.
|
|
*/
|
|
ret = amc6821_get_auto_point_temps(data->regmap, 1 - nr, otemps);
|
|
if (ret)
|
|
goto unlock;
|
|
val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 63000), 1000);
|
|
val = clamp_val(val, 0, min(temps[1], otemps[1]));
|
|
ret = regmap_write(regmap, AMC6821_REG_PSV_TEMP, val);
|
|
break;
|
|
case 1:
|
|
/*
|
|
* Low limit; must be between passive and high limit,
|
|
* and not exceed 124. Step size is 4 degrees C.
|
|
*/
|
|
val = clamp_val(val, DIV_ROUND_UP(temps[0], 4) * 4000, 124000);
|
|
temps[1] = DIV_ROUND_CLOSEST(val, 4000) * 4;
|
|
val = temps[1] / 4;
|
|
/* Auto-adjust high limit if necessary */
|
|
temps[2] = clamp_val(temps[2], temps[1] + 1, 255);
|
|
ret = set_slope_register(regmap, nr, temps);
|
|
break;
|
|
case 2:
|
|
/* high limit, must be higher than low limit */
|
|
val = clamp_val(val, (temps[1] + 1) * 1000, 255000);
|
|
temps[2] = DIV_ROUND_CLOSEST(val, 1000);
|
|
ret = set_slope_register(regmap, nr, temps);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
unlock:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret ? : count;
|
|
}
|
|
|
|
static ssize_t pwm1_auto_point_pwm_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct amc6821_data *data = dev_get_drvdata(dev);
|
|
struct regmap *regmap = data->regmap;
|
|
int i, ret;
|
|
u8 val;
|
|
|
|
ret = kstrtou8(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
ret = regmap_write(regmap, AMC6821_REG_DCY_LOW_TEMP, val);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u8 temps[3];
|
|
|
|
ret = amc6821_get_auto_point_temps(regmap, i, temps);
|
|
if (ret)
|
|
break;
|
|
ret = set_slope_register(regmap, i, temps);
|
|
if (ret)
|
|
break;
|
|
}
|
|
unlock:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret ? : count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm1_auto_point_pwm, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_pwm, pwm1_auto_point_pwm, 1);
|
|
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm1_auto_point_pwm, 2);
|
|
static SENSOR_DEVICE_ATTR_2_RO(temp1_auto_point1_temp, temp_auto_point_temp,
|
|
0, 0);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point2_temp, temp_auto_point_temp,
|
|
0, 1);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp1_auto_point3_temp, temp_auto_point_temp,
|
|
0, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point1_temp, temp_auto_point_temp,
|
|
1, 0);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point2_temp, temp_auto_point_temp,
|
|
1, 1);
|
|
static SENSOR_DEVICE_ATTR_2_RW(temp2_auto_point3_temp, temp_auto_point_temp,
|
|
1, 2);
|
|
|
|
static struct attribute *amc6821_attrs[] = {
|
|
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_auto_point3_temp.dev_attr.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(amc6821);
|
|
|
|
static int amc6821_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
return amc6821_temp_read(dev, attr, channel, val);
|
|
case hwmon_fan:
|
|
return amc6821_fan_read(dev, attr, val);
|
|
case hwmon_pwm:
|
|
return amc6821_pwm_read(dev, attr, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int amc6821_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
return amc6821_temp_write(dev, attr, channel, val);
|
|
case hwmon_fan:
|
|
return amc6821_fan_write(dev, attr, val);
|
|
case hwmon_pwm:
|
|
return amc6821_pwm_write(dev, attr, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t amc6821_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_crit_alarm:
|
|
case hwmon_temp_fault:
|
|
return 0444;
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_crit:
|
|
return 0644;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_fan:
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
case hwmon_fan_fault:
|
|
return 0444;
|
|
case hwmon_fan_pulses:
|
|
case hwmon_fan_min:
|
|
case hwmon_fan_max:
|
|
case hwmon_fan_target:
|
|
return 0644;
|
|
default:
|
|
return 0;
|
|
}
|
|
case hwmon_pwm:
|
|
switch (attr) {
|
|
case hwmon_pwm_mode:
|
|
case hwmon_pwm_enable:
|
|
case hwmon_pwm_input:
|
|
return 0644;
|
|
case hwmon_pwm_auto_channels_temp:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static const struct hwmon_channel_info * const amc6821_info[] = {
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM |
|
|
HWMON_T_FAULT),
|
|
HWMON_CHANNEL_INFO(fan,
|
|
HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
|
|
HWMON_F_TARGET | HWMON_F_PULSES | HWMON_F_FAULT),
|
|
HWMON_CHANNEL_INFO(pwm,
|
|
HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE |
|
|
HWMON_PWM_AUTO_CHANNELS_TEMP),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops amc6821_hwmon_ops = {
|
|
.is_visible = amc6821_is_visible,
|
|
.read = amc6821_read,
|
|
.write = amc6821_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info amc6821_chip_info = {
|
|
.ops = &amc6821_hwmon_ops,
|
|
.info = amc6821_info,
|
|
};
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int amc6821_detect(struct i2c_client *client, struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int address = client->addr;
|
|
int dev_id, comp_id;
|
|
|
|
dev_dbg(&adapter->dev, "amc6821_detect called.\n");
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
dev_dbg(&adapter->dev,
|
|
"amc6821: I2C bus doesn't support byte mode, "
|
|
"skipping.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_id = i2c_smbus_read_byte_data(client, AMC6821_REG_DEV_ID);
|
|
comp_id = i2c_smbus_read_byte_data(client, AMC6821_REG_COMP_ID);
|
|
if (dev_id != 0x21 || comp_id != 0x49) {
|
|
dev_dbg(&adapter->dev,
|
|
"amc6821: detection failed at 0x%02x.\n",
|
|
address);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Bit 7 of the address register is ignored, so we can check the
|
|
* ID registers again
|
|
*/
|
|
dev_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_DEV_ID);
|
|
comp_id = i2c_smbus_read_byte_data(client, 0x80 | AMC6821_REG_COMP_ID);
|
|
if (dev_id != 0x21 || comp_id != 0x49) {
|
|
dev_dbg(&adapter->dev,
|
|
"amc6821: detection failed at 0x%02x.\n",
|
|
address);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(&adapter->dev, "amc6821: chip found at 0x%02x.\n", address);
|
|
strscpy(info->type, "amc6821", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amc6821_init_client(struct amc6821_data *data)
|
|
{
|
|
struct regmap *regmap = data->regmap;
|
|
int err;
|
|
|
|
if (init) {
|
|
err = regmap_set_bits(regmap, AMC6821_REG_CONF4, AMC6821_CONF4_MODE);
|
|
if (err)
|
|
return err;
|
|
err = regmap_clear_bits(regmap, AMC6821_REG_CONF3, AMC6821_CONF3_THERM_FAN_EN);
|
|
if (err)
|
|
return err;
|
|
err = regmap_clear_bits(regmap, AMC6821_REG_CONF2,
|
|
AMC6821_CONF2_RTFIE |
|
|
AMC6821_CONF2_LTOIE |
|
|
AMC6821_CONF2_RTOIE);
|
|
if (err)
|
|
return err;
|
|
|
|
err = regmap_update_bits(regmap, AMC6821_REG_CONF1,
|
|
AMC6821_CONF1_THERMOVIE | AMC6821_CONF1_FANIE |
|
|
AMC6821_CONF1_START | AMC6821_CONF1_PWMINV,
|
|
AMC6821_CONF1_START |
|
|
(pwminv ? AMC6821_CONF1_PWMINV : 0));
|
|
if (err)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool amc6821_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case AMC6821_REG_STAT1:
|
|
case AMC6821_REG_STAT2:
|
|
case AMC6821_REG_TEMP_LO:
|
|
case AMC6821_REG_TDATA_LOW:
|
|
case AMC6821_REG_LTEMP_HI:
|
|
case AMC6821_REG_RTEMP_HI:
|
|
case AMC6821_REG_TDATA_HI:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config amc6821_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = AMC6821_REG_CONF3,
|
|
.volatile_reg = amc6821_volatile_reg,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
};
|
|
|
|
static int amc6821_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct amc6821_data *data;
|
|
struct device *hwmon_dev;
|
|
struct regmap *regmap;
|
|
int err;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct amc6821_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &amc6821_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(dev, PTR_ERR(regmap),
|
|
"Failed to initialize regmap\n");
|
|
data->regmap = regmap;
|
|
|
|
err = amc6821_init_client(data);
|
|
if (err)
|
|
return err;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data, &amc6821_chip_info,
|
|
amc6821_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id amc6821_id[] = {
|
|
{ "amc6821", 0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, amc6821_id);
|
|
|
|
static const struct of_device_id __maybe_unused amc6821_of_match[] = {
|
|
{
|
|
.compatible = "ti,amc6821",
|
|
},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, amc6821_of_match);
|
|
|
|
static struct i2c_driver amc6821_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "amc6821",
|
|
.of_match_table = of_match_ptr(amc6821_of_match),
|
|
},
|
|
.probe = amc6821_probe,
|
|
.id_table = amc6821_id,
|
|
.detect = amc6821_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(amc6821_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("T. Mertelj <tomaz.mertelj@guest.arnes.si>");
|
|
MODULE_DESCRIPTION("Texas Instruments amc6821 hwmon driver");
|