52db8bdb6b
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/7a56558f7e5aa34bf0b21d22f9036a136a2b7322.1703006638.git.u.kleine-koenig@pengutronix.de Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
220 lines
5.6 KiB
C
220 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* FPGA to/from HPS Bridge Driver for Altera SoCFPGA Devices
|
|
*
|
|
* Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
|
|
*
|
|
* Includes this patch from the mailing list:
|
|
* fpga: altera-hps2fpga: fix HPS2FPGA bridge visibility to L3 masters
|
|
* Signed-off-by: Anatolij Gustschin <agust@denx.de>
|
|
*/
|
|
|
|
/*
|
|
* This driver manages bridges on a Altera SOCFPGA between the ARM host
|
|
* processor system (HPS) and the embedded FPGA.
|
|
*
|
|
* This driver supports enabling and disabling of the configured ports, which
|
|
* allows for safe reprogramming of the FPGA, assuming that the new FPGA image
|
|
* uses the same port configuration. Bridges must be disabled before
|
|
* reprogramming the FPGA and re-enabled after the FPGA has been programmed.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/fpga/fpga-bridge.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define ALT_L3_REMAP_OFST 0x0
|
|
#define ALT_L3_REMAP_MPUZERO_MSK 0x00000001
|
|
#define ALT_L3_REMAP_H2F_MSK 0x00000008
|
|
#define ALT_L3_REMAP_LWH2F_MSK 0x00000010
|
|
|
|
#define HPS2FPGA_BRIDGE_NAME "hps2fpga"
|
|
#define LWHPS2FPGA_BRIDGE_NAME "lwhps2fpga"
|
|
#define FPGA2HPS_BRIDGE_NAME "fpga2hps"
|
|
|
|
struct altera_hps2fpga_data {
|
|
const char *name;
|
|
struct reset_control *bridge_reset;
|
|
struct regmap *l3reg;
|
|
unsigned int remap_mask;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static int alt_hps2fpga_enable_show(struct fpga_bridge *bridge)
|
|
{
|
|
struct altera_hps2fpga_data *priv = bridge->priv;
|
|
|
|
return reset_control_status(priv->bridge_reset);
|
|
}
|
|
|
|
/* The L3 REMAP register is write only, so keep a cached value. */
|
|
static unsigned int l3_remap_shadow;
|
|
static DEFINE_SPINLOCK(l3_remap_lock);
|
|
|
|
static int _alt_hps2fpga_enable_set(struct altera_hps2fpga_data *priv,
|
|
bool enable)
|
|
{
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
/* bring bridge out of reset */
|
|
if (enable)
|
|
ret = reset_control_deassert(priv->bridge_reset);
|
|
else
|
|
ret = reset_control_assert(priv->bridge_reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Allow bridge to be visible to L3 masters or not */
|
|
if (priv->remap_mask) {
|
|
spin_lock_irqsave(&l3_remap_lock, flags);
|
|
l3_remap_shadow |= ALT_L3_REMAP_MPUZERO_MSK;
|
|
|
|
if (enable)
|
|
l3_remap_shadow |= priv->remap_mask;
|
|
else
|
|
l3_remap_shadow &= ~priv->remap_mask;
|
|
|
|
ret = regmap_write(priv->l3reg, ALT_L3_REMAP_OFST,
|
|
l3_remap_shadow);
|
|
spin_unlock_irqrestore(&l3_remap_lock, flags);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int alt_hps2fpga_enable_set(struct fpga_bridge *bridge, bool enable)
|
|
{
|
|
return _alt_hps2fpga_enable_set(bridge->priv, enable);
|
|
}
|
|
|
|
static const struct fpga_bridge_ops altera_hps2fpga_br_ops = {
|
|
.enable_set = alt_hps2fpga_enable_set,
|
|
.enable_show = alt_hps2fpga_enable_show,
|
|
};
|
|
|
|
static struct altera_hps2fpga_data hps2fpga_data = {
|
|
.name = HPS2FPGA_BRIDGE_NAME,
|
|
.remap_mask = ALT_L3_REMAP_H2F_MSK,
|
|
};
|
|
|
|
static struct altera_hps2fpga_data lwhps2fpga_data = {
|
|
.name = LWHPS2FPGA_BRIDGE_NAME,
|
|
.remap_mask = ALT_L3_REMAP_LWH2F_MSK,
|
|
};
|
|
|
|
static struct altera_hps2fpga_data fpga2hps_data = {
|
|
.name = FPGA2HPS_BRIDGE_NAME,
|
|
};
|
|
|
|
static const struct of_device_id altera_fpga_of_match[] = {
|
|
{ .compatible = "altr,socfpga-hps2fpga-bridge",
|
|
.data = &hps2fpga_data },
|
|
{ .compatible = "altr,socfpga-lwhps2fpga-bridge",
|
|
.data = &lwhps2fpga_data },
|
|
{ .compatible = "altr,socfpga-fpga2hps-bridge",
|
|
.data = &fpga2hps_data },
|
|
{},
|
|
};
|
|
|
|
static int alt_fpga_bridge_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct altera_hps2fpga_data *priv;
|
|
struct fpga_bridge *br;
|
|
u32 enable;
|
|
int ret;
|
|
|
|
priv = (struct altera_hps2fpga_data *)device_get_match_data(dev);
|
|
|
|
priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node,
|
|
0);
|
|
if (IS_ERR(priv->bridge_reset)) {
|
|
dev_err(dev, "Could not get %s reset control\n", priv->name);
|
|
return PTR_ERR(priv->bridge_reset);
|
|
}
|
|
|
|
if (priv->remap_mask) {
|
|
priv->l3reg = syscon_regmap_lookup_by_compatible("altr,l3regs");
|
|
if (IS_ERR(priv->l3reg)) {
|
|
dev_err(dev, "regmap for altr,l3regs lookup failed\n");
|
|
return PTR_ERR(priv->l3reg);
|
|
}
|
|
}
|
|
|
|
priv->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
dev_err(dev, "no clock specified\n");
|
|
return PTR_ERR(priv->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable clock\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) {
|
|
if (enable > 1) {
|
|
dev_warn(dev, "invalid bridge-enable %u > 1\n", enable);
|
|
} else {
|
|
dev_info(dev, "%s bridge\n",
|
|
(enable ? "enabling" : "disabling"));
|
|
|
|
ret = _alt_hps2fpga_enable_set(priv, enable);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
br = fpga_bridge_register(dev, priv->name,
|
|
&altera_hps2fpga_br_ops, priv);
|
|
if (IS_ERR(br)) {
|
|
ret = PTR_ERR(br);
|
|
goto err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, br);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void alt_fpga_bridge_remove(struct platform_device *pdev)
|
|
{
|
|
struct fpga_bridge *bridge = platform_get_drvdata(pdev);
|
|
struct altera_hps2fpga_data *priv = bridge->priv;
|
|
|
|
fpga_bridge_unregister(bridge);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, altera_fpga_of_match);
|
|
|
|
static struct platform_driver alt_fpga_bridge_driver = {
|
|
.probe = alt_fpga_bridge_probe,
|
|
.remove_new = alt_fpga_bridge_remove,
|
|
.driver = {
|
|
.name = "altera_hps2fpga_bridge",
|
|
.of_match_table = of_match_ptr(altera_fpga_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(alt_fpga_bridge_driver);
|
|
|
|
MODULE_DESCRIPTION("Altera SoCFPGA HPS to FPGA Bridge");
|
|
MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>");
|
|
MODULE_LICENSE("GPL v2");
|