1
linux/drivers/clk/imx/clk-busy.c
Maxime Ripard 79ef35a944 clk: imx: busy: Add a determine_rate hook
The iMX busy clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

Similarly, it doesn't look like the device tree using that clock driver
uses any of the assigned-clock properties on that clock.

So, the set_parent hook is effectively unused, possibly because of an
oversight. However, it could also be an explicit decision by the
original author to avoid any reparenting but through an explicit call to
clk_set_parent().

The latter case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.

And if it was an oversight, then we are at least explicit about our
behavior now and it can be further refined down the line.

Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-26-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-06-08 18:39:28 -07:00

196 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2012 Linaro Ltd.
*/
#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/err.h>
#include "clk.h"
static int clk_busy_wait(void __iomem *reg, u8 shift)
{
unsigned long timeout = jiffies + msecs_to_jiffies(10);
while (readl_relaxed(reg) & (1 << shift))
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
}
struct clk_busy_divider {
struct clk_divider div;
const struct clk_ops *div_ops;
void __iomem *reg;
u8 shift;
};
static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
{
struct clk_divider *div = to_clk_divider(hw);
return container_of(div, struct clk_busy_divider, div);
}
static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_busy_divider *busy = to_clk_busy_divider(hw);
return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
}
static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
struct clk_busy_divider *busy = to_clk_busy_divider(hw);
return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
}
static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_busy_divider *busy = to_clk_busy_divider(hw);
int ret;
ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
if (!ret)
ret = clk_busy_wait(busy->reg, busy->shift);
return ret;
}
static const struct clk_ops clk_busy_divider_ops = {
.recalc_rate = clk_busy_divider_recalc_rate,
.round_rate = clk_busy_divider_round_rate,
.set_rate = clk_busy_divider_set_rate,
};
struct clk_hw *imx_clk_hw_busy_divider(const char *name, const char *parent_name,
void __iomem *reg, u8 shift, u8 width,
void __iomem *busy_reg, u8 busy_shift)
{
struct clk_busy_divider *busy;
struct clk_hw *hw;
struct clk_init_data init;
int ret;
busy = kzalloc(sizeof(*busy), GFP_KERNEL);
if (!busy)
return ERR_PTR(-ENOMEM);
busy->reg = busy_reg;
busy->shift = busy_shift;
busy->div.reg = reg;
busy->div.shift = shift;
busy->div.width = width;
busy->div.lock = &imx_ccm_lock;
busy->div_ops = &clk_divider_ops;
init.name = name;
init.ops = &clk_busy_divider_ops;
init.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL;
init.parent_names = &parent_name;
init.num_parents = 1;
busy->div.hw.init = &init;
hw = &busy->div.hw;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(busy);
return ERR_PTR(ret);
}
return hw;
}
struct clk_busy_mux {
struct clk_mux mux;
const struct clk_ops *mux_ops;
void __iomem *reg;
u8 shift;
};
static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
{
struct clk_mux *mux = to_clk_mux(hw);
return container_of(mux, struct clk_busy_mux, mux);
}
static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
{
struct clk_busy_mux *busy = to_clk_busy_mux(hw);
return busy->mux_ops->get_parent(&busy->mux.hw);
}
static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_busy_mux *busy = to_clk_busy_mux(hw);
int ret;
ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
if (!ret)
ret = clk_busy_wait(busy->reg, busy->shift);
return ret;
}
static const struct clk_ops clk_busy_mux_ops = {
.determine_rate = clk_hw_determine_rate_no_reparent,
.get_parent = clk_busy_mux_get_parent,
.set_parent = clk_busy_mux_set_parent,
};
struct clk_hw *imx_clk_hw_busy_mux(const char *name, void __iomem *reg, u8 shift,
u8 width, void __iomem *busy_reg, u8 busy_shift,
const char * const *parent_names, int num_parents)
{
struct clk_busy_mux *busy;
struct clk_hw *hw;
struct clk_init_data init;
int ret;
busy = kzalloc(sizeof(*busy), GFP_KERNEL);
if (!busy)
return ERR_PTR(-ENOMEM);
busy->reg = busy_reg;
busy->shift = busy_shift;
busy->mux.reg = reg;
busy->mux.shift = shift;
busy->mux.mask = BIT(width) - 1;
busy->mux.lock = &imx_ccm_lock;
busy->mux_ops = &clk_mux_ops;
init.name = name;
init.ops = &clk_busy_mux_ops;
init.flags = CLK_IS_CRITICAL;
init.parent_names = parent_names;
init.num_parents = num_parents;
busy->mux.hw.init = &init;
hw = &busy->mux.hw;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(busy);
return ERR_PTR(ret);
}
return hw;
}