kevin/linux
1
Fork 0
Code
master
linux/arch/x86/entry/entry_64.S
Pawan Gupta 7390db8aea x86/bhi: Add support for clearing branch history at syscall entry 
Branch History Injection (BHI) attacks may allow a malicious application to
influence indirect branch prediction in kernel by poisoning the branch
history. eIBRS isolates indirect branch targets in ring0.  The BHB can
still influence the choice of indirect branch predictor entry, and although
branch predictor entries are isolated between modes when eIBRS is enabled,
the BHB itself is not isolated between modes.

Alder Lake and new processors supports a hardware control BHI_DIS_S to
mitigate BHI.  For older processors Intel has released a software sequence
to clear the branch history on parts that don't support BHI_DIS_S. Add
support to execute the software sequence at syscall entry and VMexit to
overwrite the branch history.

For now, branch history is not cleared at interrupt entry, as malicious
applications are not believed to have sufficient control over the
registers, since previous register state is cleared at interrupt
entry. Researchers continue to poke at this area and it may become
necessary to clear at interrupt entry as well in the future.

This mitigation is only defined here. It is enabled later.

Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Co-developed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
2024-04-08 19:27:05 +02:00

1555 lines
43 KiB
ArmAsm
Raw Permalink Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/arch/x86_64/entry.S
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
*
* entry.S contains the system-call and fault low-level handling routines.
*
* Some of this is documented in Documentation/arch/x86/entry_64.rst
*
* A note on terminology:
* - iret frame: Architecture defined interrupt frame from SS to RIP
* at the top of the kernel process stack.
*
* Some macro usage:
* - SYM_FUNC_START/END:Define functions in the symbol table.
* - idtentry: Define exception entry points.
*/
#include <linux/export.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/msr.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/hw_irq.h>
#include <asm/page_types.h>
#include <asm/irqflags.h>
#include <asm/paravirt.h>
#include <asm/percpu.h>
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/pgtable_types.h>
#include <asm/frame.h>
#include <asm/trapnr.h>
#include <asm/nospec-branch.h>
#include <asm/fsgsbase.h>
#include <linux/err.h>
#include "calling.h"
.code64
.section .entry.text, "ax"
/*
* 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
*
* This is the only entry point used for 64-bit system calls. The
* hardware interface is reasonably well designed and the register to
* argument mapping Linux uses fits well with the registers that are
* available when SYSCALL is used.
*
* SYSCALL instructions can be found inlined in libc implementations as
* well as some other programs and libraries. There are also a handful
* of SYSCALL instructions in the vDSO used, for example, as a
* clock_gettimeofday fallback.
*
* 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
* then loads new ss, cs, and rip from previously programmed MSRs.
* rflags gets masked by a value from another MSR (so CLD and CLAC
* are not needed). SYSCALL does not save anything on the stack
* and does not change rsp.
*
* Registers on entry:
* rax system call number
* rcx return address
* r11 saved rflags (note: r11 is callee-clobbered register in C ABI)
* rdi arg0
* rsi arg1
* rdx arg2
* r10 arg3 (needs to be moved to rcx to conform to C ABI)
* r8 arg4
* r9 arg5
* (note: r12-r15, rbp, rbx are callee-preserved in C ABI)
*
* Only called from user space.
*
* When user can change pt_regs->foo always force IRET. That is because
* it deals with uncanonical addresses better. SYSRET has trouble
* with them due to bugs in both AMD and Intel CPUs.
*/
SYM_CODE_START(entry_SYSCALL_64)
UNWIND_HINT_ENTRY
ENDBR
swapgs
/* tss.sp2 is scratch space. */
movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp
SYM_INNER_LABEL(entry_SYSCALL_64_safe_stack, SYM_L_GLOBAL)
ANNOTATE_NOENDBR
/* Construct struct pt_regs on stack */
pushq $__USER_DS /* pt_regs->ss */
pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2) /* pt_regs->sp */
pushq %r11 /* pt_regs->flags */
pushq $__USER_CS /* pt_regs->cs */
pushq %rcx /* pt_regs->ip */
SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
pushq %rax /* pt_regs->orig_ax */
PUSH_AND_CLEAR_REGS rax=$-ENOSYS
/* IRQs are off. */
movq %rsp, %rdi
/* Sign extend the lower 32bit as syscall numbers are treated as int */
movslq %eax, %rsi
/* clobbers %rax, make sure it is after saving the syscall nr */
IBRS_ENTER
UNTRAIN_RET
CLEAR_BRANCH_HISTORY
call do_syscall_64 /* returns with IRQs disabled */
/*
* Try to use SYSRET instead of IRET if we're returning to
* a completely clean 64-bit userspace context. If we're not,
* go to the slow exit path.
* In the Xen PV case we must use iret anyway.
*/
ALTERNATIVE "testb %al, %al; jz swapgs_restore_regs_and_return_to_usermode", \
"jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
/*
* We win! This label is here just for ease of understanding
* perf profiles. Nothing jumps here.
*/
syscall_return_via_sysret:
IBRS_EXIT
POP_REGS pop_rdi=0
/*
* Now all regs are restored except RSP and RDI.
* Save old stack pointer and switch to trampoline stack.
*/
movq %rsp, %rdi
movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
UNWIND_HINT_END_OF_STACK
pushq RSP-RDI(%rdi) /* RSP */
pushq (%rdi) /* RDI */
/*
* We are on the trampoline stack. All regs except RDI are live.
* We can do future final exit work right here.
*/
STACKLEAK_ERASE_NOCLOBBER
SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
popq %rdi
popq %rsp
SYM_INNER_LABEL(entry_SYSRETQ_unsafe_stack, SYM_L_GLOBAL)
ANNOTATE_NOENDBR
swapgs
CLEAR_CPU_BUFFERS
sysretq
SYM_INNER_LABEL(entry_SYSRETQ_end, SYM_L_GLOBAL)
ANNOTATE_NOENDBR
int3
SYM_CODE_END(entry_SYSCALL_64)
/*
* %rdi: prev task
* %rsi: next task
*/
.pushsection .text, "ax"
SYM_FUNC_START(__switch_to_asm)
/*
* Save callee-saved registers
* This must match the order in inactive_task_frame
*/
pushq %rbp
pushq %rbx
pushq %r12
pushq %r13
pushq %r14
pushq %r15
/* switch stack */
movq %rsp, TASK_threadsp(%rdi)
movq TASK_threadsp(%rsi), %rsp
#ifdef CONFIG_STACKPROTECTOR
movq TASK_stack_canary(%rsi), %rbx
movq %rbx, PER_CPU_VAR(fixed_percpu_data + FIXED_stack_canary)
#endif
/*
* When switching from a shallower to a deeper call stack
* the RSB may either underflow or use entries populated
* with userspace addresses. On CPUs where those concerns
* exist, overwrite the RSB with entries which capture
* speculative execution to prevent attack.
*/
FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW
/* restore callee-saved registers */
popq %r15
popq %r14
popq %r13
popq %r12
popq %rbx
popq %rbp
jmp __switch_to
SYM_FUNC_END(__switch_to_asm)
.popsection
/*
* A newly forked process directly context switches into this address.
*
* rax: prev task we switched from
* rbx: kernel thread func (NULL for user thread)
* r12: kernel thread arg
*/
.pushsection .text, "ax"
SYM_CODE_START(ret_from_fork_asm)
/*
* This is the start of the kernel stack; even through there's a
* register set at the top, the regset isn't necessarily coherent
* (consider kthreads) and one cannot unwind further.
*
* This ensures stack unwinds of kernel threads terminate in a known
* good state.
*/
UNWIND_HINT_END_OF_STACK
ANNOTATE_NOENDBR // copy_thread
CALL_DEPTH_ACCOUNT
movq %rax, %rdi /* prev */
movq %rsp, %rsi /* regs */
movq %rbx, %rdx /* fn */
movq %r12, %rcx /* fn_arg */
call ret_from_fork
/*
* Set the stack state to what is expected for the target function
* -- at this point the register set should be a valid user set
* and unwind should work normally.
*/
UNWIND_HINT_REGS
#ifdef CONFIG_X86_FRED
ALTERNATIVE "jmp swapgs_restore_regs_and_return_to_usermode", \
"jmp asm_fred_exit_user", X86_FEATURE_FRED
#else
jmp swapgs_restore_regs_and_return_to_usermode
#endif
SYM_CODE_END(ret_from_fork_asm)
.popsection
.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
pushq %rax
SAVE_FLAGS
testl $X86_EFLAGS_IF, %eax
jz .Lokay_\@
ud2
.Lokay_\@:
popq %rax
#endif
.endm
SYM_CODE_START(xen_error_entry)
ANNOTATE_NOENDBR
UNWIND_HINT_FUNC
PUSH_AND_CLEAR_REGS save_ret=1
ENCODE_FRAME_POINTER 8
UNTRAIN_RET_FROM_CALL
RET
SYM_CODE_END(xen_error_entry)
/**
* idtentry_body - Macro to emit code calling the C function
* @cfunc: C function to be called
* @has_error_code: Hardware pushed error code on stack
*/
.macro idtentry_body cfunc has_error_code:req
/*
* Call error_entry() and switch to the task stack if from userspace.
*
* When in XENPV, it is already in the task stack, and it can't fault
* for native_iret() nor native_load_gs_index() since XENPV uses its
* own pvops for IRET and load_gs_index(). And it doesn't need to
* switch the CR3. So it can skip invoking error_entry().
*/
ALTERNATIVE "call error_entry; movq %rax, %rsp", \
"call xen_error_entry", X86_FEATURE_XENPV
ENCODE_FRAME_POINTER
UNWIND_HINT_REGS
movq %rsp, %rdi /* pt_regs pointer into 1st argument*/
.if \has_error_code == 1
movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/
movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */
.endif
call \cfunc
/* For some configurations \cfunc ends up being a noreturn. */
REACHABLE
jmp error_return
.endm
/**
* idtentry - Macro to generate entry stubs for simple IDT entries
* @vector: Vector number
* @asmsym: ASM symbol for the entry point
* @cfunc: C function to be called
* @has_error_code: Hardware pushed error code on stack
*
* The macro emits code to set up the kernel context for straight forward
* and simple IDT entries. No IST stack, no paranoid entry checks.
*/
.macro idtentry vector asmsym cfunc has_error_code:req
SYM_CODE_START(\asmsym)
.if \vector == X86_TRAP_BP
/* #BP advances %rip to the next instruction */
UNWIND_HINT_IRET_ENTRY offset=\has_error_code*8 signal=0
.else
UNWIND_HINT_IRET_ENTRY offset=\has_error_code*8
.endif
ENDBR
ASM_CLAC
cld
.if \has_error_code == 0
pushq $-1 /* ORIG_RAX: no syscall to restart */
.endif
.if \vector == X86_TRAP_BP
/*
* If coming from kernel space, create a 6-word gap to allow the
* int3 handler to emulate a call instruction.
*/
testb $3, CS-ORIG_RAX(%rsp)
jnz .Lfrom_usermode_no_gap_\@
.rept 6
pushq 5*8(%rsp)
.endr
UNWIND_HINT_IRET_REGS offset=8
.Lfrom_usermode_no_gap_\@:
.endif
idtentry_body \cfunc \has_error_code
_ASM_NOKPROBE(\asmsym)
SYM_CODE_END(\asmsym)
.endm
/*
* Interrupt entry/exit.
*
+ The interrupt stubs push (vector) onto the stack, which is the error_code
* position of idtentry exceptions, and jump to one of the two idtentry points
* (common/spurious).
*
* common_interrupt is a hotpath, align it to a cache line
*/
.macro idtentry_irq vector cfunc
.p2align CONFIG_X86_L1_CACHE_SHIFT
idtentry \vector asm_\cfunc \cfunc has_error_code=1
.endm
/**
* idtentry_mce_db - Macro to generate entry stubs for #MC and #DB
* @vector: Vector number
* @asmsym: ASM symbol for the entry point
* @cfunc: C function to be called
*
* The macro emits code to set up the kernel context for #MC and #DB
*
* If the entry comes from user space it uses the normal entry path
* including the return to user space work and preemption checks on
* exit.
*
* If hits in kernel mode then it needs to go through the paranoid
* entry as the exception can hit any random state. No preemption
* check on exit to keep the paranoid path simple.
*/
.macro idtentry_mce_db vector asmsym cfunc
SYM_CODE_START(\asmsym)
UNWIND_HINT_IRET_ENTRY
ENDBR
ASM_CLAC
cld
pushq $-1 /* ORIG_RAX: no syscall to restart */
/*
* If the entry is from userspace, switch stacks and treat it as
* a normal entry.
*/
testb $3, CS-ORIG_RAX(%rsp)
jnz .Lfrom_usermode_switch_stack_\@
/* paranoid_entry returns GS information for paranoid_exit in EBX. */
call paranoid_entry
UNWIND_HINT_REGS
movq %rsp, %rdi /* pt_regs pointer */
call \cfunc
jmp paranoid_exit
/* Switch to the regular task stack and use the noist entry point */
.Lfrom_usermode_switch_stack_\@:
idtentry_body noist_\cfunc, has_error_code=0
_ASM_NOKPROBE(\asmsym)
SYM_CODE_END(\asmsym)
.endm
#ifdef CONFIG_AMD_MEM_ENCRYPT
/**
* idtentry_vc - Macro to generate entry stub for #VC
* @vector: Vector number
* @asmsym: ASM symbol for the entry point
* @cfunc: C function to be called
*
* The macro emits code to set up the kernel context for #VC. The #VC handler
* runs on an IST stack and needs to be able to cause nested #VC exceptions.
*
* To make this work the #VC entry code tries its best to pretend it doesn't use
* an IST stack by switching to the task stack if coming from user-space (which
* includes early SYSCALL entry path) or back to the stack in the IRET frame if
* entered from kernel-mode.
*
* If entered from kernel-mode the return stack is validated first, and if it is
* not safe to use (e.g. because it points to the entry stack) the #VC handler
* will switch to a fall-back stack (VC2) and call a special handler function.
*
* The macro is only used for one vector, but it is planned to be extended in
* the future for the #HV exception.
*/
.macro idtentry_vc vector asmsym cfunc
SYM_CODE_START(\asmsym)
UNWIND_HINT_IRET_ENTRY
ENDBR
ASM_CLAC
cld
/*
* If the entry is from userspace, switch stacks and treat it as
* a normal entry.
*/
testb $3, CS-ORIG_RAX(%rsp)
jnz .Lfrom_usermode_switch_stack_\@
/*
* paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
* EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
*/
call paranoid_entry
UNWIND_HINT_REGS
/*
* Switch off the IST stack to make it free for nested exceptions. The
* vc_switch_off_ist() function will switch back to the interrupted
* stack if it is safe to do so. If not it switches to the VC fall-back
* stack.
*/
movq %rsp, %rdi /* pt_regs pointer */
call vc_switch_off_ist
movq %rax, %rsp /* Switch to new stack */
ENCODE_FRAME_POINTER
UNWIND_HINT_REGS
/* Update pt_regs */
movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/
movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */
movq %rsp, %rdi /* pt_regs pointer */
call kernel_\cfunc
/*
* No need to switch back to the IST stack. The current stack is either
* identical to the stack in the IRET frame or the VC fall-back stack,
* so it is definitely mapped even with PTI enabled.
*/
jmp paranoid_exit
/* Switch to the regular task stack */
.Lfrom_usermode_switch_stack_\@:
idtentry_body user_\cfunc, has_error_code=1
_ASM_NOKPROBE(\asmsym)
SYM_CODE_END(\asmsym)
.endm
#endif
/*
* Double fault entry. Straight paranoid. No checks from which context
* this comes because for the espfix induced #DF this would do the wrong
* thing.
*/
.macro idtentry_df vector asmsym cfunc
SYM_CODE_START(\asmsym)
UNWIND_HINT_IRET_ENTRY offset=8
ENDBR
ASM_CLAC
cld
/* paranoid_entry returns GS information for paranoid_exit in EBX. */
call paranoid_entry
UNWIND_HINT_REGS
movq %rsp, %rdi /* pt_regs pointer into first argument */
movq ORIG_RAX(%rsp), %rsi /* get error code into 2nd argument*/
movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */
call \cfunc
/* For some configurations \cfunc ends up being a noreturn. */
REACHABLE
jmp paranoid_exit
_ASM_NOKPROBE(\asmsym)
SYM_CODE_END(\asmsym)
.endm
/*
* Include the defines which emit the idt entries which are shared
* shared between 32 and 64 bit and emit the __irqentry_text_* markers
* so the stacktrace boundary checks work.
*/
__ALIGN
.globl __irqentry_text_start
__irqentry_text_start:
#include <asm/idtentry.h>
__ALIGN
.globl __irqentry_text_end
__irqentry_text_end:
ANNOTATE_NOENDBR
SYM_CODE_START_LOCAL(common_interrupt_return)
SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
IBRS_EXIT
#ifdef CONFIG_XEN_PV
ALTERNATIVE "", "jmp xenpv_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
#endif
#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
ALTERNATIVE "", "jmp .Lpti_restore_regs_and_return_to_usermode", X86_FEATURE_PTI
#endif
STACKLEAK_ERASE
POP_REGS
add $8, %rsp /* orig_ax */
UNWIND_HINT_IRET_REGS
.Lswapgs_and_iret:
swapgs
CLEAR_CPU_BUFFERS
/* Assert that the IRET frame indicates user mode. */
testb $3, 8(%rsp)
jnz .Lnative_iret
ud2
#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
.Lpti_restore_regs_and_return_to_usermode:
POP_REGS pop_rdi=0
/*
* The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS.
* Save old stack pointer and switch to trampoline stack.
*/
movq %rsp, %rdi
movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
UNWIND_HINT_END_OF_STACK
/* Copy the IRET frame to the trampoline stack. */
pushq 6*8(%rdi) /* SS */
pushq 5*8(%rdi) /* RSP */
pushq 4*8(%rdi) /* EFLAGS */
pushq 3*8(%rdi) /* CS */
pushq 2*8(%rdi) /* RIP */
/* Push user RDI on the trampoline stack. */
pushq (%rdi)
/*
* We are on the trampoline stack. All regs except RDI are live.
* We can do future final exit work right here.
*/
STACKLEAK_ERASE_NOCLOBBER
push %rax
SWITCH_TO_USER_CR3 scratch_reg=%rdi scratch_reg2=%rax
pop %rax
/* Restore RDI. */
popq %rdi
jmp .Lswapgs_and_iret
#endif
SYM_INNER_LABEL(restore_regs_and_return_to_kernel, SYM_L_GLOBAL)
#ifdef CONFIG_DEBUG_ENTRY
/* Assert that pt_regs indicates kernel mode. */
testb $3, CS(%rsp)
jz 1f
ud2
1:
#endif
POP_REGS
addq $8, %rsp /* skip regs->orig_ax */
/*
* ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
* when returning from IPI handler.
*/
#ifdef CONFIG_XEN_PV
SYM_INNER_LABEL(early_xen_iret_patch, SYM_L_GLOBAL)
ANNOTATE_NOENDBR
.byte 0xe9
.long .Lnative_iret - (. + 4)
#endif
.Lnative_iret:
UNWIND_HINT_IRET_REGS
/*
* Are we returning to a stack segment from the LDT? Note: in
* 64-bit mode SS:RSP on the exception stack is always valid.
*/
#ifdef CONFIG_X86_ESPFIX64
testb $4, (SS-RIP)(%rsp)
jnz native_irq_return_ldt
#endif
SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
ANNOTATE_NOENDBR // exc_double_fault
/*
* This may fault. Non-paranoid faults on return to userspace are
* handled by fixup_bad_iret. These include #SS, #GP, and #NP.
* Double-faults due to espfix64 are handled in exc_double_fault.
* Other faults here are fatal.
*/
iretq
#ifdef CONFIG_X86_ESPFIX64
native_irq_return_ldt:
/*
* We are running with user GSBASE. All GPRs contain their user
* values. We have a percpu ESPFIX stack that is eight slots
* long (see ESPFIX_STACK_SIZE). espfix_waddr points to the bottom
* of the ESPFIX stack.
*
* We clobber RAX and RDI in this code. We stash RDI on the
* normal stack and RAX on the ESPFIX stack.
*
* The ESPFIX stack layout we set up looks like this:
*
* --- top of ESPFIX stack ---
* SS
* RSP
* RFLAGS
* CS
* RIP <-- RSP points here when we're done
* RAX <-- espfix_waddr points here
* --- bottom of ESPFIX stack ---
*/
pushq %rdi /* Stash user RDI */
swapgs /* to kernel GS */
SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi /* to kernel CR3 */
movq PER_CPU_VAR(espfix_waddr), %rdi
movq %rax, (0*8)(%rdi) /* user RAX */
movq (1*8)(%rsp), %rax /* user RIP */
movq %rax, (1*8)(%rdi)
movq (2*8)(%rsp), %rax /* user CS */
movq %rax, (2*8)(%rdi)
movq (3*8)(%rsp), %rax /* user RFLAGS */
movq %rax, (3*8)(%rdi)
movq (5*8)(%rsp), %rax /* user SS */
movq %rax, (5*8)(%rdi)
movq (4*8)(%rsp), %rax /* user RSP */
movq %rax, (4*8)(%rdi)
/* Now RAX == RSP. */
andl $0xffff0000, %eax /* RAX = (RSP & 0xffff0000) */
/*
* espfix_stack[31:16] == 0. The page tables are set up such that
* (espfix_stack | (X & 0xffff0000)) points to a read-only alias of
* espfix_waddr for any X. That is, there are 65536 RO aliases of
* the same page. Set up RSP so that RSP[31:16] contains the
* respective 16 bits of the /userspace/ RSP and RSP nonetheless
* still points to an RO alias of the ESPFIX stack.
*/
orq PER_CPU_VAR(espfix_stack), %rax
SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
swapgs /* to user GS */
popq %rdi /* Restore user RDI */
movq %rax, %rsp
UNWIND_HINT_IRET_REGS offset=8
/*
* At this point, we cannot write to the stack any more, but we can
* still read.
*/
popq %rax /* Restore user RAX */
CLEAR_CPU_BUFFERS
/*
* RSP now points to an ordinary IRET frame, except that the page
* is read-only and RSP[31:16] are preloaded with the userspace
* values. We can now IRET back to userspace.
*/
jmp native_irq_return_iret
#endif
SYM_CODE_END(common_interrupt_return)
_ASM_NOKPROBE(common_interrupt_return)
/*
* Reload gs selector with exception handling
* di: new selector
*
* Is in entry.text as it shouldn't be instrumented.
*/
SYM_FUNC_START(asm_load_gs_index)
FRAME_BEGIN
swapgs
.Lgs_change:
ANNOTATE_NOENDBR // error_entry
movl %edi, %gs
2: ALTERNATIVE "", "mfence", X86_BUG_SWAPGS_FENCE
swapgs
FRAME_END
RET
/* running with kernelgs */
.Lbad_gs:
swapgs /* switch back to user gs */
.macro ZAP_GS
/* This can't be a string because the preprocessor needs to see it. */
movl $__USER_DS, %eax
movl %eax, %gs
.endm
ALTERNATIVE "", "ZAP_GS", X86_BUG_NULL_SEG
xorl %eax, %eax
movl %eax, %gs
jmp 2b
_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
SYM_FUNC_END(asm_load_gs_index)
EXPORT_SYMBOL(asm_load_gs_index)
#ifdef CONFIG_XEN_PV
/*
* A note on the "critical region" in our callback handler.
* We want to avoid stacking callback handlers due to events occurring
* during handling of the last event. To do this, we keep events disabled
* until we've done all processing. HOWEVER, we must enable events before
* popping the stack frame (can't be done atomically) and so it would still
* be possible to get enough handler activations to overflow the stack.
* Although unlikely, bugs of that kind are hard to track down, so we'd
* like to avoid the possibility.
* So, on entry to the handler we detect whether we interrupted an
* existing activation in its critical region -- if so, we pop the current
* activation and restart the handler using the previous one.
*
* C calling convention: exc_xen_hypervisor_callback(struct *pt_regs)
*/
__FUNC_ALIGN
SYM_CODE_START_LOCAL_NOALIGN(exc_xen_hypervisor_callback)
/*
* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
* see the correct pointer to the pt_regs
*/
UNWIND_HINT_FUNC
movq %rdi, %rsp /* we don't return, adjust the stack frame */
UNWIND_HINT_REGS
call xen_pv_evtchn_do_upcall
jmp error_return
SYM_CODE_END(exc_xen_hypervisor_callback)
/*
* Hypervisor uses this for application faults while it executes.
* We get here for two reasons:
* 1. Fault while reloading DS, ES, FS or GS
* 2. Fault while executing IRET
* Category 1 we do not need to fix up as Xen has already reloaded all segment
* registers that could be reloaded and zeroed the others.
* Category 2 we fix up by killing the current process. We cannot use the
* normal Linux return path in this case because if we use the IRET hypercall
* to pop the stack frame we end up in an infinite loop of failsafe callbacks.
* We distinguish between categories by comparing each saved segment register
* with its current contents: any discrepancy means we in category 1.
*/
__FUNC_ALIGN
SYM_CODE_START_NOALIGN(xen_failsafe_callback)
UNWIND_HINT_UNDEFINED
ENDBR
movl %ds, %ecx
cmpw %cx, 0x10(%rsp)
jne 1f
movl %es, %ecx
cmpw %cx, 0x18(%rsp)
jne 1f
movl %fs, %ecx
cmpw %cx, 0x20(%rsp)
jne 1f
movl %gs, %ecx
cmpw %cx, 0x28(%rsp)
jne 1f
/* All segments match their saved values => Category 2 (Bad IRET). */
movq (%rsp), %rcx
movq 8(%rsp), %r11
addq $0x30, %rsp
pushq $0 /* RIP */
UNWIND_HINT_IRET_REGS offset=8
jmp asm_exc_general_protection
1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
movq (%rsp), %rcx
movq 8(%rsp), %r11
addq $0x30, %rsp
UNWIND_HINT_IRET_REGS
pushq $-1 /* orig_ax = -1 => not a system call */
PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_return
SYM_CODE_END(xen_failsafe_callback)
#endif /* CONFIG_XEN_PV */
/*
* Save all registers in pt_regs. Return GSBASE related information
* in EBX depending on the availability of the FSGSBASE instructions:
*
* FSGSBASE R/EBX
* N 0 -> SWAPGS on exit
* 1 -> no SWAPGS on exit
*
* Y GSBASE value at entry, must be restored in paranoid_exit
*
* R14 - old CR3
* R15 - old SPEC_CTRL
*/
SYM_CODE_START(paranoid_entry)
ANNOTATE_NOENDBR
UNWIND_HINT_FUNC
PUSH_AND_CLEAR_REGS save_ret=1
ENCODE_FRAME_POINTER 8
/*
* Always stash CR3 in %r14. This value will be restored,
* verbatim, at exit. Needed if paranoid_entry interrupted
* another entry that already switched to the user CR3 value
* but has not yet returned to userspace.
*
* This is also why CS (stashed in the "iret frame" by the
* hardware at entry) can not be used: this may be a return
* to kernel code, but with a user CR3 value.
*
* Switching CR3 does not depend on kernel GSBASE so it can
* be done before switching to the kernel GSBASE. This is
* required for FSGSBASE because the kernel GSBASE has to
* be retrieved from a kernel internal table.
*/
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
/*
* Handling GSBASE depends on the availability of FSGSBASE.
*
* Without FSGSBASE the kernel enforces that negative GSBASE
* values indicate kernel GSBASE. With FSGSBASE no assumptions
* can be made about the GSBASE value when entering from user
* space.
*/
ALTERNATIVE "jmp .Lparanoid_entry_checkgs", "", X86_FEATURE_FSGSBASE
/*
* Read the current GSBASE and store it in %rbx unconditionally,
* retrieve and set the current CPUs kernel GSBASE. The stored value
* has to be restored in paranoid_exit unconditionally.
*
* The unconditional write to GS base below ensures that no subsequent
* loads based on a mispredicted GS base can happen, therefore no LFENCE
* is needed here.
*/
SAVE_AND_SET_GSBASE scratch_reg=%rax save_reg=%rbx
jmp .Lparanoid_gsbase_done
.Lparanoid_entry_checkgs:
/* EBX = 1 -> kernel GSBASE active, no restore required */
movl $1, %ebx
/*
* The kernel-enforced convention is a negative GSBASE indicates
* a kernel value. No SWAPGS needed on entry and exit.
*/
movl $MSR_GS_BASE, %ecx
rdmsr
testl %edx, %edx
js .Lparanoid_kernel_gsbase
/* EBX = 0 -> SWAPGS required on exit */
xorl %ebx, %ebx
swapgs
.Lparanoid_kernel_gsbase:
FENCE_SWAPGS_KERNEL_ENTRY
.Lparanoid_gsbase_done:
/*
* Once we have CR3 and %GS setup save and set SPEC_CTRL. Just like
* CR3 above, keep the old value in a callee saved register.
*/
IBRS_ENTER save_reg=%r15
UNTRAIN_RET_FROM_CALL
RET
SYM_CODE_END(paranoid_entry)
/*
* "Paranoid" exit path from exception stack. This is invoked
* only on return from non-NMI IST interrupts that came
* from kernel space.
*
* We may be returning to very strange contexts (e.g. very early
* in syscall entry), so checking for preemption here would
* be complicated. Fortunately, there's no good reason to try
* to handle preemption here.
*
* R/EBX contains the GSBASE related information depending on the
* availability of the FSGSBASE instructions:
*
* FSGSBASE R/EBX
* N 0 -> SWAPGS on exit
* 1 -> no SWAPGS on exit
*
* Y User space GSBASE, must be restored unconditionally
*
* R14 - old CR3
* R15 - old SPEC_CTRL
*/
SYM_CODE_START_LOCAL(paranoid_exit)
UNWIND_HINT_REGS
/*
* Must restore IBRS state before both CR3 and %GS since we need access
* to the per-CPU x86_spec_ctrl_shadow variable.
*/
IBRS_EXIT save_reg=%r15
/*
* The order of operations is important. PARANOID_RESTORE_CR3 requires
* kernel GSBASE.
*
* NB to anyone to try to optimize this code: this code does
* not execute at all for exceptions from user mode. Those
* exceptions go through error_return instead.
*/
PARANOID_RESTORE_CR3 scratch_reg=%rax save_reg=%r14
/* Handle the three GSBASE cases */
ALTERNATIVE "jmp .Lparanoid_exit_checkgs", "", X86_FEATURE_FSGSBASE
/* With FSGSBASE enabled, unconditionally restore GSBASE */
wrgsbase %rbx
jmp restore_regs_and_return_to_kernel
.Lparanoid_exit_checkgs:
/* On non-FSGSBASE systems, conditionally do SWAPGS */
testl %ebx, %ebx
jnz restore_regs_and_return_to_kernel
/* We are returning to a context with user GSBASE */
swapgs
jmp restore_regs_and_return_to_kernel
SYM_CODE_END(paranoid_exit)
/*
* Switch GS and CR3 if needed.
*/
SYM_CODE_START(error_entry)
ANNOTATE_NOENDBR
UNWIND_HINT_FUNC
PUSH_AND_CLEAR_REGS save_ret=1
ENCODE_FRAME_POINTER 8
testb $3, CS+8(%rsp)
jz .Lerror_kernelspace
/*
* We entered from user mode or we're pretending to have entered
* from user mode due to an IRET fault.
*/
swapgs
FENCE_SWAPGS_USER_ENTRY
/* We have user CR3. Change to kernel CR3. */
SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
IBRS_ENTER
UNTRAIN_RET_FROM_CALL
leaq 8(%rsp), %rdi /* arg0 = pt_regs pointer */
/* Put us onto the real thread stack. */
jmp sync_regs
/*
* There are two places in the kernel that can potentially fault with
* usergs. Handle them here. B stepping K8s sometimes report a
* truncated RIP for IRET exceptions returning to compat mode. Check
* for these here too.
*/
.Lerror_kernelspace:
leaq native_irq_return_iret(%rip), %rcx
cmpq %rcx, RIP+8(%rsp)
je .Lerror_bad_iret
movl %ecx, %eax /* zero extend */
cmpq %rax, RIP+8(%rsp)
je .Lbstep_iret
cmpq $.Lgs_change, RIP+8(%rsp)
jne .Lerror_entry_done_lfence
/*
* hack: .Lgs_change can fail with user gsbase. If this happens, fix up
* gsbase and proceed. We'll fix up the exception and land in
* .Lgs_change's error handler with kernel gsbase.
*/
swapgs
/*
* Issue an LFENCE to prevent GS speculation, regardless of whether it is a
* kernel or user gsbase.
*/
.Lerror_entry_done_lfence:
FENCE_SWAPGS_KERNEL_ENTRY
CALL_DEPTH_ACCOUNT
leaq 8(%rsp), %rax /* return pt_regs pointer */
VALIDATE_UNRET_END
RET
.Lbstep_iret:
/* Fix truncated RIP */
movq %rcx, RIP+8(%rsp)
/* fall through */
.Lerror_bad_iret:
/*
* We came from an IRET to user mode, so we have user
* gsbase and CR3. Switch to kernel gsbase and CR3:
*/
swapgs
FENCE_SWAPGS_USER_ENTRY
SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
IBRS_ENTER
UNTRAIN_RET_FROM_CALL
/*
* Pretend that the exception came from user mode: set up pt_regs
* as if we faulted immediately after IRET.
*/
leaq 8(%rsp), %rdi /* arg0 = pt_regs pointer */
call fixup_bad_iret
mov %rax, %rdi
jmp sync_regs
SYM_CODE_END(error_entry)
SYM_CODE_START_LOCAL(error_return)
UNWIND_HINT_REGS
DEBUG_ENTRY_ASSERT_IRQS_OFF
testb $3, CS(%rsp)
jz restore_regs_and_return_to_kernel
jmp swapgs_restore_regs_and_return_to_usermode
SYM_CODE_END(error_return)
/*
* Runs on exception stack. Xen PV does not go through this path at all,
* so we can use real assembly here.
*
* Registers:
* %r14: Used to save/restore the CR3 of the interrupted context
* when MITIGATION_PAGE_TABLE_ISOLATION is in use. Do not clobber.
*/
SYM_CODE_START(asm_exc_nmi)
UNWIND_HINT_IRET_ENTRY
ENDBR
/*
* We allow breakpoints in NMIs. If a breakpoint occurs, then
* the iretq it performs will take us out of NMI context.
* This means that we can have nested NMIs where the next
* NMI is using the top of the stack of the previous NMI. We
* can't let it execute because the nested NMI will corrupt the
* stack of the previous NMI. NMI handlers are not re-entrant
* anyway.
*
* To handle this case we do the following:
* Check a special location on the stack that contains a
* variable that is set when NMIs are executing.
* The interrupted task's stack is also checked to see if it
* is an NMI stack.
* If the variable is not set and the stack is not the NMI
* stack then:
* o Set the special variable on the stack
* o Copy the interrupt frame into an "outermost" location on the
* stack
* o Copy the interrupt frame into an "iret" location on the stack
* o Continue processing the NMI
* If the variable is set or the previous stack is the NMI stack:
* o Modify the "iret" location to jump to the repeat_nmi
* o return back to the first NMI
*
* Now on exit of the first NMI, we first clear the stack variable
* The NMI stack will tell any nested NMIs at that point that it is
* nested. Then we pop the stack normally with iret, and if there was
* a nested NMI that updated the copy interrupt stack frame, a
* jump will be made to the repeat_nmi code that will handle the second
* NMI.
*
* However, espfix prevents us from directly returning to userspace
* with a single IRET instruction. Similarly, IRET to user mode
* can fault. We therefore handle NMIs from user space like
* other IST entries.
*/
ASM_CLAC
cld
/* Use %rdx as our temp variable throughout */
pushq %rdx
testb $3, CS-RIP+8(%rsp)
jz .Lnmi_from_kernel
/*
* NMI from user mode. We need to run on the thread stack, but we
* can't go through the normal entry paths: NMIs are masked, and
* we don't want to enable interrupts, because then we'll end
* up in an awkward situation in which IRQs are on but NMIs
* are off.
*
* We also must not push anything to the stack before switching
* stacks lest we corrupt the "NMI executing" variable.
*/
swapgs
FENCE_SWAPGS_USER_ENTRY
SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx
movq %rsp, %rdx
movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rsp
UNWIND_HINT_IRET_REGS base=%rdx offset=8
pushq 5*8(%rdx) /* pt_regs->ss */
pushq 4*8(%rdx) /* pt_regs->rsp */
pushq 3*8(%rdx) /* pt_regs->flags */
pushq 2*8(%rdx) /* pt_regs->cs */
pushq 1*8(%rdx) /* pt_regs->rip */
UNWIND_HINT_IRET_REGS
pushq $-1 /* pt_regs->orig_ax */
PUSH_AND_CLEAR_REGS rdx=(%rdx)
ENCODE_FRAME_POINTER
IBRS_ENTER
UNTRAIN_RET
/*
* At this point we no longer need to worry about stack damage
* due to nesting -- we're on the normal thread stack and we're
* done with the NMI stack.
*/
movq %rsp, %rdi
call exc_nmi
/*
* Return back to user mode. We must *not* do the normal exit
* work, because we don't want to enable interrupts.
*/
jmp swapgs_restore_regs_and_return_to_usermode
.Lnmi_from_kernel:
/*
* Here's what our stack frame will look like:
* +---------------------------------------------------------+
* | original SS |
* | original Return RSP |
* | original RFLAGS |
* | original CS |
* | original RIP |
* +---------------------------------------------------------+
* | temp storage for rdx |
* +---------------------------------------------------------+
* | "NMI executing" variable |
* +---------------------------------------------------------+
* | iret SS } Copied from "outermost" frame |
* | iret Return RSP } on each loop iteration; overwritten |
* | iret RFLAGS } by a nested NMI to force another |
* | iret CS } iteration if needed. |
* | iret RIP } |
* +---------------------------------------------------------+
* | outermost SS } initialized in first_nmi; |
* | outermost Return RSP } will not be changed before |
* | outermost RFLAGS } NMI processing is done. |
* | outermost CS } Copied to "iret" frame on each |
* | outermost RIP } iteration. |
* +---------------------------------------------------------+
* | pt_regs |
* +---------------------------------------------------------+
*
* The "original" frame is used by hardware. Before re-enabling
* NMIs, we need to be done with it, and we need to leave enough
* space for the asm code here.
*
* We return by executing IRET while RSP points to the "iret" frame.
* That will either return for real or it will loop back into NMI
* processing.
*
* The "outermost" frame is copied to the "iret" frame on each
* iteration of the loop, so each iteration starts with the "iret"
* frame pointing to the final return target.
*/
/*
* Determine whether we're a nested NMI.
*
* If we interrupted kernel code between repeat_nmi and
* end_repeat_nmi, then we are a nested NMI. We must not
* modify the "iret" frame because it's being written by
* the outer NMI. That's okay; the outer NMI handler is
* about to call exc_nmi() anyway, so we can just resume
* the outer NMI.
*/
movq $repeat_nmi, %rdx
cmpq 8(%rsp), %rdx
ja 1f
movq $end_repeat_nmi, %rdx
cmpq 8(%rsp), %rdx
ja nested_nmi_out
1:
/*
* Now check "NMI executing". If it's set, then we're nested.
* This will not detect if we interrupted an outer NMI just
* before IRET.
*/
cmpl $1, -8(%rsp)
je nested_nmi
/*
* Now test if the previous stack was an NMI stack. This covers
* the case where we interrupt an outer NMI after it clears
* "NMI executing" but before IRET. We need to be careful, though:
* there is one case in which RSP could point to the NMI stack
* despite there being no NMI active: naughty userspace controls
* RSP at the very beginning of the SYSCALL targets. We can
* pull a fast one on naughty userspace, though: we program
* SYSCALL to mask DF, so userspace cannot cause DF to be set
* if it controls the kernel's RSP. We set DF before we clear
* "NMI executing".
*/
lea 6*8(%rsp), %rdx
/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
cmpq %rdx, 4*8(%rsp)
/* If the stack pointer is above the NMI stack, this is a normal NMI */
ja first_nmi
subq $EXCEPTION_STKSZ, %rdx
cmpq %rdx, 4*8(%rsp)
/* If it is below the NMI stack, it is a normal NMI */
jb first_nmi
/* Ah, it is within the NMI stack. */
testb $(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp)
jz first_nmi /* RSP was user controlled. */
/* This is a nested NMI. */
nested_nmi:
/*
* Modify the "iret" frame to point to repeat_nmi, forcing another
* iteration of NMI handling.
*/
subq $8, %rsp
leaq -10*8(%rsp), %rdx
pushq $__KERNEL_DS
pushq %rdx
pushfq
pushq $__KERNEL_CS
pushq $repeat_nmi
/* Put stack back */
addq $(6*8), %rsp
nested_nmi_out:
popq %rdx
/* We are returning to kernel mode, so this cannot result in a fault. */
iretq
first_nmi:
/* Restore rdx. */
movq (%rsp), %rdx
/* Make room for "NMI executing". */
pushq $0
/* Leave room for the "iret" frame */
subq $(5*8), %rsp
/* Copy the "original" frame to the "outermost" frame */
.rept 5
pushq 11*8(%rsp)
.endr
UNWIND_HINT_IRET_REGS
/* Everything up to here is safe from nested NMIs */
#ifdef CONFIG_DEBUG_ENTRY
/*
* For ease of testing, unmask NMIs right away. Disabled by
* default because IRET is very expensive.
*/
pushq $0 /* SS */
pushq %rsp /* RSP (minus 8 because of the previous push) */
addq $8, (%rsp) /* Fix up RSP */
pushfq /* RFLAGS */
pushq $__KERNEL_CS /* CS */
pushq $1f /* RIP */
iretq /* continues at repeat_nmi below */
UNWIND_HINT_IRET_REGS
1:
#endif
repeat_nmi:
ANNOTATE_NOENDBR // this code
/*
* If there was a nested NMI, the first NMI's iret will return
* here. But NMIs are still enabled and we can take another
* nested NMI. The nested NMI checks the interrupted RIP to see
* if it is between repeat_nmi and end_repeat_nmi, and if so
* it will just return, as we are about to repeat an NMI anyway.
* This makes it safe to copy to the stack frame that a nested
* NMI will update.
*
* RSP is pointing to "outermost RIP". gsbase is unknown, but, if
* we're repeating an NMI, gsbase has the same value that it had on
* the first iteration. paranoid_entry will load the kernel
* gsbase if needed before we call exc_nmi(). "NMI executing"
* is zero.
*/
movq $1, 10*8(%rsp) /* Set "NMI executing". */
/*
* Copy the "outermost" frame to the "iret" frame. NMIs that nest
* here must not modify the "iret" frame while we're writing to
* it or it will end up containing garbage.
*/
addq $(10*8), %rsp
.rept 5
pushq -6*8(%rsp)
.endr
subq $(5*8), %rsp
end_repeat_nmi:
ANNOTATE_NOENDBR // this code
/*
* Everything below this point can be preempted by a nested NMI.
* If this happens, then the inner NMI will change the "iret"
* frame to point back to repeat_nmi.
*/
pushq $-1 /* ORIG_RAX: no syscall to restart */
/*
* Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
* as we should not be calling schedule in NMI context.
* Even with normal interrupts enabled. An NMI should not be
* setting NEED_RESCHED or anything that normal interrupts and
* exceptions might do.
*/
call paranoid_entry
UNWIND_HINT_REGS
movq %rsp, %rdi
call exc_nmi
/* Always restore stashed SPEC_CTRL value (see paranoid_entry) */
IBRS_EXIT save_reg=%r15
PARANOID_RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
/*
* The above invocation of paranoid_entry stored the GSBASE
* related information in R/EBX depending on the availability
* of FSGSBASE.
*
* If FSGSBASE is enabled, restore the saved GSBASE value
* unconditionally, otherwise take the conditional SWAPGS path.
*/
ALTERNATIVE "jmp nmi_no_fsgsbase", "", X86_FEATURE_FSGSBASE
wrgsbase %rbx
jmp nmi_restore
nmi_no_fsgsbase:
/* EBX == 0 -> invoke SWAPGS */
testl %ebx, %ebx
jnz nmi_restore
nmi_swapgs:
swapgs
nmi_restore:
POP_REGS
/*
* Skip orig_ax and the "outermost" frame to point RSP at the "iret"
* at the "iret" frame.
*/
addq $6*8, %rsp
/*
* Clear "NMI executing". Set DF first so that we can easily
* distinguish the remaining code between here and IRET from
* the SYSCALL entry and exit paths.
*
* We arguably should just inspect RIP instead, but I (Andy) wrote
* this code when I had the misapprehension that Xen PV supported
* NMIs, and Xen PV would break that approach.
*/
std
movq $0, 5*8(%rsp) /* clear "NMI executing" */
/*
* Skip CLEAR_CPU_BUFFERS here, since it only helps in rare cases like
* NMI in kernel after user state is restored. For an unprivileged user
* these conditions are hard to meet.
*/
/*
* iretq reads the "iret" frame and exits the NMI stack in a
* single instruction. We are returning to kernel mode, so this
* cannot result in a fault. Similarly, we don't need to worry
* about espfix64 on the way back to kernel mode.
*/
iretq
SYM_CODE_END(asm_exc_nmi)
/*
* This handles SYSCALL from 32-bit code. There is no way to program
* MSRs to fully disable 32-bit SYSCALL.
*/
SYM_CODE_START(entry_SYSCALL32_ignore)
UNWIND_HINT_END_OF_STACK
ENDBR
mov $-ENOSYS, %eax
CLEAR_CPU_BUFFERS
sysretl
SYM_CODE_END(entry_SYSCALL32_ignore)
.pushsection .text, "ax"
__FUNC_ALIGN
SYM_CODE_START_NOALIGN(rewind_stack_and_make_dead)
UNWIND_HINT_FUNC
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
movq PER_CPU_VAR(pcpu_hot + X86_top_of_stack), %rax
leaq -PTREGS_SIZE(%rax), %rsp
UNWIND_HINT_REGS
call make_task_dead
SYM_CODE_END(rewind_stack_and_make_dead)
.popsection
/*
* This sequence executes branches in order to remove user branch information
* from the branch history tracker in the Branch Predictor, therefore removing
* user influence on subsequent BTB lookups.
*
* It should be used on parts prior to Alder Lake. Newer parts should use the
* BHI_DIS_S hardware control instead. If a pre-Alder Lake part is being
* virtualized on newer hardware the VMM should protect against BHI attacks by
* setting BHI_DIS_S for the guests.
*
* CALLs/RETs are necessary to prevent Loop Stream Detector(LSD) from engaging
* and not clearing the branch history. The call tree looks like:
*
* call 1
* call 2
* call 2
* call 2
* call 2
* call 2
* ret
* ret
* ret
* ret
* ret
* ret
*
* This means that the stack is non-constant and ORC can't unwind it with %rsp
* alone. Therefore we unconditionally set up the frame pointer, which allows
* ORC to unwind properly.
*
* The alignment is for performance and not for safety, and may be safely
* refactored in the future if needed.
*/
SYM_FUNC_START(clear_bhb_loop)
push %rbp
mov %rsp, %rbp
movl $5, %ecx
ANNOTATE_INTRA_FUNCTION_CALL
call 1f
jmp 5f
.align 64, 0xcc
ANNOTATE_INTRA_FUNCTION_CALL
1: call 2f
RET
.align 64, 0xcc
2: movl $5, %eax
3: jmp 4f
nop
4: sub $1, %eax
jnz 3b
sub $1, %ecx
jnz 1b
RET
5: lfence
pop %rbp
RET
SYM_FUNC_END(clear_bhb_loop)
EXPORT_SYMBOL_GPL(clear_bhb_loop)
STACK_FRAME_NON_STANDARD(clear_bhb_loop)
View Git Blame Copy Permalink