1
linux/arch/sh/include/mach-se/mach/se7343.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

144 lines
4.1 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __ASM_SH_HITACHI_SE7343_H
#define __ASM_SH_HITACHI_SE7343_H
/*
* include/asm-sh/se/se7343.h
*
* Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
*
* SH-Mobile SolutionEngine 7343 support
*/
#include <linux/sh_intc.h>
/* Box specific addresses. */
/* Area 0 */
#define PA_ROM 0x00000000 /* EPROM */
#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */
#define PA_FROM 0x00400000 /* Flash ROM */
#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */
#define PA_SRAM 0x00800000 /* SRAM */
#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */
/* Area 1 */
#define PA_EXT1 0x04000000
#define PA_EXT1_SIZE 0x04000000
/* Area 2 */
#define PA_EXT2 0x08000000
#define PA_EXT2_SIZE 0x04000000
/* Area 3 */
#define PA_SDRAM 0x0c000000
#define PA_SDRAM_SIZE 0x04000000
/* Area 4 */
#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */
#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */
#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */
#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */
#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */
#define MRSHPC_OPTION (PA_MRSHPC + 6)
#define MRSHPC_CSR (PA_MRSHPC + 8)
#define MRSHPC_ISR (PA_MRSHPC + 10)
#define MRSHPC_ICR (PA_MRSHPC + 12)
#define MRSHPC_CPWCR (PA_MRSHPC + 14)
#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
#define MRSHPC_CDCR (PA_MRSHPC + 28)
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED 0xb0C00000 /* LED */
#define LED_SHIFT 0
#define PA_DIPSW 0xb0900000 /* Dip switch 31 */
/* Area 5 */
#define PA_EXT5 0x14000000
#define PA_EXT5_SIZE 0x04000000
/* Area 6 */
#define PA_LCD1 0xb8000000
#define PA_LCD2 0xb8800000
#define PORT_PACR 0xA4050100
#define PORT_PBCR 0xA4050102
#define PORT_PCCR 0xA4050104
#define PORT_PDCR 0xA4050106
#define PORT_PECR 0xA4050108
#define PORT_PFCR 0xA405010A
#define PORT_PGCR 0xA405010C
#define PORT_PHCR 0xA405010E
#define PORT_PJCR 0xA4050110
#define PORT_PKCR 0xA4050112
#define PORT_PLCR 0xA4050114
#define PORT_PMCR 0xA4050116
#define PORT_PNCR 0xA4050118
#define PORT_PQCR 0xA405011A
#define PORT_PRCR 0xA405011C
#define PORT_PSCR 0xA405011E
#define PORT_PTCR 0xA4050140
#define PORT_PUCR 0xA4050142
#define PORT_PVCR 0xA4050144
#define PORT_PWCR 0xA4050146
#define PORT_PYCR 0xA4050148
#define PORT_PZCR 0xA405014A
#define PORT_PSELA 0xA405014C
#define PORT_PSELB 0xA405014E
#define PORT_PSELC 0xA4050150
#define PORT_PSELD 0xA4050152
#define PORT_PSELE 0xA4050154
#define PORT_HIZCRA 0xA4050156
#define PORT_HIZCRB 0xA4050158
#define PORT_HIZCRC 0xA405015C
#define PORT_DRVCR 0xA4050180
#define PORT_PADR 0xA4050120
#define PORT_PBDR 0xA4050122
#define PORT_PCDR 0xA4050124
#define PORT_PDDR 0xA4050126
#define PORT_PEDR 0xA4050128
#define PORT_PFDR 0xA405012A
#define PORT_PGDR 0xA405012C
#define PORT_PHDR 0xA405012E
#define PORT_PJDR 0xA4050130
#define PORT_PKDR 0xA4050132
#define PORT_PLDR 0xA4050134
#define PORT_PMDR 0xA4050136
#define PORT_PNDR 0xA4050138
#define PORT_PQDR 0xA405013A
#define PORT_PRDR 0xA405013C
#define PORT_PTDR 0xA4050160
#define PORT_PUDR 0xA4050162
#define PORT_PVDR 0xA4050164
#define PORT_PWDR 0xA4050166
#define PORT_PYDR 0xA4050168
#define FPGA_IN 0xb1400000
#define FPGA_OUT 0xb1400002
#define IRQ0_IRQ evt2irq(0x600)
#define IRQ1_IRQ evt2irq(0x620)
#define IRQ4_IRQ evt2irq(0x680)
#define IRQ5_IRQ evt2irq(0x6a0)
#define SE7343_FPGA_IRQ_MRSHPC0 0
#define SE7343_FPGA_IRQ_MRSHPC1 1
#define SE7343_FPGA_IRQ_MRSHPC2 2
#define SE7343_FPGA_IRQ_MRSHPC3 3
#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */
#define SE7343_FPGA_IRQ_USB 8
#define SE7343_FPGA_IRQ_UARTA 10
#define SE7343_FPGA_IRQ_UARTB 11
#define SE7343_FPGA_IRQ_NR 12
struct irq_domain;
/* arch/sh/boards/se/7343/irq.c */
extern struct irq_domain *se7343_irq_domain;
void init_7343se_IRQ(void);
#endif /* __ASM_SH_HITACHI_SE7343_H */