1
linux/arch/arm/lib/memmove.S
Ard Biesheuvel ccb81601ac ARM: memmove: use frame pointer as unwind anchor
The memmove routine is a bit unusual in the way it manages the stack
pointer: depending on the execution path through the function, the SP
assumes different values as different subsets of the register file are
preserved and restored again. This is problematic when it comes to EHABI
unwind info, as it is not instruction accurate, and does not allow
tracking the SP value as it changes.

Commit 207a6cb069 ("ARM: 8224/1: Add unwinding support for memmove
function") addressed this by carving up the function in different chunks
as far as the unwinder is concerned, and keeping a set of unwind
directives for each of them, each corresponding with the state of the
stack pointer during execution of the chunk in question. This not only
duplicates unwind info unnecessarily, but it also complicates unwinding
the stack upon overflow.

Instead, let's do what the compiler does when the SP is updated halfway
through a function, which is to use a frame pointer and emit the
appropriate unwind directives to communicate this to the unwinder.

Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's
avoid touching R7 in the body of the function, so that Thumb-2 can use
it as the frame pointer. R11 was not modified in the first place.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
2021-12-03 15:11:32 +01:00

207 lines
4.2 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/lib/memmove.S
*
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: (C) MontaVista Software Inc.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/unwind.h>
.text
/*
* Prototype: void *memmove(void *dest, const void *src, size_t n);
*
* Note:
*
* If the memory regions don't overlap, we simply branch to memcpy which is
* normally a bit faster. Otherwise the copy is done going downwards. This
* is a transposition of the code from copy_template.S but with the copy
* occurring in the opposite direction.
*/
ENTRY(__memmove)
WEAK(memmove)
UNWIND( .fnstart )
subs ip, r0, r1
cmphi r2, ip
bls __memcpy
UNWIND( .fnend )
UNWIND( .fnstart )
UNWIND( .save {r0, r4, fpreg, lr} )
stmfd sp!, {r0, r4, UNWIND(fpreg,) lr}
UNWIND( .setfp fpreg, sp )
UNWIND( mov fpreg, sp )
add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
blt 8f
ands ip, r0, #3
PLD( pld [r1, #-4] )
bne 9f
ands ip, r1, #3
bne 10f
1: subs r2, r2, #(28)
stmfd sp!, {r5, r6, r8, r9}
blt 5f
CALGN( ands ip, r0, #31 )
CALGN( sbcsne r4, ip, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, ip ) @ C is set here
CALGN( rsb ip, ip, #32 )
CALGN( add pc, r4, ip )
PLD( pld [r1, #-4] )
2: PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 4f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
3: PLD( pld [r1, #-128] )
4: ldmdb r1!, {r3, r4, r5, r6, r8, r9, ip, lr}
subs r2, r2, #32
stmdb r0!, {r3, r4, r5, r6, r8, r9, ip, lr}
bge 3b
PLD( cmn r2, #96 )
PLD( bge 4b )
5: ands ip, r2, #28
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: W(nop)
W(ldr) r3, [r1, #-4]!
W(ldr) r4, [r1, #-4]!
W(ldr) r5, [r1, #-4]!
W(ldr) r6, [r1, #-4]!
W(ldr) r8, [r1, #-4]!
W(ldr) r9, [r1, #-4]!
W(ldr) lr, [r1, #-4]!
add pc, pc, ip
nop
W(nop)
W(str) r3, [r0, #-4]!
W(str) r4, [r0, #-4]!
W(str) r5, [r0, #-4]!
W(str) r6, [r0, #-4]!
W(str) r8, [r0, #-4]!
W(str) r9, [r0, #-4]!
W(str) lr, [r0, #-4]!
CALGN( bcs 2b )
7: ldmfd sp!, {r5, r6, r8, r9}
8: movs r2, r2, lsl #31
ldrbne r3, [r1, #-1]!
ldrbcs r4, [r1, #-1]!
ldrbcs ip, [r1, #-1]
strbne r3, [r0, #-1]!
strbcs r4, [r0, #-1]!
strbcs ip, [r0, #-1]
ldmfd sp!, {r0, r4, UNWIND(fpreg,) pc}
9: cmp ip, #2
ldrbgt r3, [r1, #-1]!
ldrbge r4, [r1, #-1]!
ldrb lr, [r1, #-1]!
strbgt r3, [r0, #-1]!
strbge r4, [r0, #-1]!
subs r2, r2, ip
strb lr, [r0, #-1]!
blt 8b
ands ip, r1, #3
beq 1b
10: bic r1, r1, #3
cmp ip, #2
ldr r3, [r1, #0]
beq 17f
blt 18f
.macro backward_copy_shift push pull
subs r2, r2, #28
blt 14f
CALGN( ands ip, r0, #31 )
CALGN( sbcsne r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
11: stmfd sp!, {r5, r6, r8 - r10}
PLD( pld [r1, #-4] )
PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 13f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
12: PLD( pld [r1, #-128] )
13: ldmdb r1!, {r8, r9, r10, ip}
mov lr, r3, lspush #\push
subs r2, r2, #32
ldmdb r1!, {r3, r4, r5, r6}
orr lr, lr, ip, lspull #\pull
mov ip, ip, lspush #\push
orr ip, ip, r10, lspull #\pull
mov r10, r10, lspush #\push
orr r10, r10, r9, lspull #\pull
mov r9, r9, lspush #\push
orr r9, r9, r8, lspull #\pull
mov r8, r8, lspush #\push
orr r8, r8, r6, lspull #\pull
mov r6, r6, lspush #\push
orr r6, r6, r5, lspull #\pull
mov r5, r5, lspush #\push
orr r5, r5, r4, lspull #\pull
mov r4, r4, lspush #\push
orr r4, r4, r3, lspull #\pull
stmdb r0!, {r4 - r6, r8 - r10, ip, lr}
bge 12b
PLD( cmn r2, #96 )
PLD( bge 13b )
ldmfd sp!, {r5, r6, r8 - r10}
14: ands ip, r2, #28
beq 16f
15: mov lr, r3, lspush #\push
ldr r3, [r1, #-4]!
subs ip, ip, #4
orr lr, lr, r3, lspull #\pull
str lr, [r0, #-4]!
bgt 15b
CALGN( cmp r2, #0 )
CALGN( bge 11b )
16: add r1, r1, #(\pull / 8)
b 8b
.endm
backward_copy_shift push=8 pull=24
17: backward_copy_shift push=16 pull=16
18: backward_copy_shift push=24 pull=8
UNWIND( .fnend )
ENDPROC(memmove)
ENDPROC(__memmove)