1
linux/arch/arc/kernel/head.S
Bjorn Helgaas ebfc2fd887 ARC: Fix typos
Fix typos, most reported by "codespell arch/arc".  Only touches comments,
no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2024-04-01 18:40:39 -07:00

174 lines
4.4 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* ARC CPU startup Code
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* Vineetg: Dec 2007
* -Check if we are running on Simulator or on real hardware
* to skip certain things during boot on simulator
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/entry.h>
#include <asm/arcregs.h>
#include <asm/cache.h>
#include <asm/dsp-impl.h>
#include <asm/irqflags.h>
.macro CPU_EARLY_SETUP
; Setting up Vectror Table (in case exception happens in early boot
sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE]
; Disable I-cache/D-cache if kernel so configured
lr r5, [ARC_REG_IC_BCR]
breq r5, 0, 1f ; I$ doesn't exist
lr r5, [ARC_REG_IC_CTRL]
#ifdef CONFIG_ARC_HAS_ICACHE
bclr r5, r5, 0 ; 0 - Enable, 1 is Disable
#else
bset r5, r5, 0 ; I$ exists, but is not used
#endif
sr r5, [ARC_REG_IC_CTRL]
1:
lr r5, [ARC_REG_DC_BCR]
breq r5, 0, 1f ; D$ doesn't exist
lr r5, [ARC_REG_DC_CTRL]
bclr r5, r5, 6 ; Invalidate (discard w/o wback)
#ifdef CONFIG_ARC_HAS_DCACHE
bclr r5, r5, 0 ; Enable (+Inv)
#else
bset r5, r5, 0 ; Disable (+Inv)
#endif
sr r5, [ARC_REG_DC_CTRL]
1:
#ifdef CONFIG_ISA_ARCV2
; Unaligned access is disabled at reset, so re-enable early as
; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
; by default
lr r5, [status32]
#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
bset r5, r5, STATUS_AD_BIT
#else
; Although disabled at reset, bootloader might have enabled it
bclr r5, r5, STATUS_AD_BIT
#endif
kflag r5
#ifdef CONFIG_ARC_LPB_DISABLE
lr r5, [ARC_REG_LPB_BUILD]
breq r5, 0, 1f ; LPB doesn't exist
mov r5, 1
sr r5, [ARC_REG_LPB_CTRL]
1:
#endif /* CONFIG_ARC_LPB_DISABLE */
/* On HSDK, CCMs need to remapped super early */
#ifdef CONFIG_ARC_SOC_HSDK
mov r6, 0x60000000
lr r5, [ARC_REG_ICCM_BUILD]
breq r5, 0, 1f
sr r6, [ARC_REG_AUX_ICCM]
1:
lr r5, [ARC_REG_DCCM_BUILD]
breq r5, 0, 2f
sr r6, [ARC_REG_AUX_DCCM]
2:
#endif /* CONFIG_ARC_SOC_HSDK */
#endif /* CONFIG_ISA_ARCV2 */
; Config DSP_CTRL properly, so kernel may use integer multiply,
; multiply-accumulate, and divide operations
DSP_EARLY_INIT
.endm
.section .init.text, "ax",@progbits
;----------------------------------------------------------------
; Default Reset Handler (jumped into from Reset vector)
; - Don't clobber r0,r1,r2 as they might have u-boot provided args
; - Platforms can override this weak version if needed
;----------------------------------------------------------------
WEAK(res_service)
j stext
END(res_service)
;----------------------------------------------------------------
; Kernel Entry point
;----------------------------------------------------------------
ENTRY(stext)
CPU_EARLY_SETUP
#ifdef CONFIG_SMP
GET_CPU_ID r5
cmp r5, 0
mov.nz r0, r5
bz .Lmaster_proceed
; Non-Masters wait for Master to boot enough and bring them up
; when they resume, tail-call to entry point
mov blink, @first_lines_of_secondary
j arc_platform_smp_wait_to_boot
.Lmaster_proceed:
#endif
; Clear BSS before updating any globals
; XXX: use ZOL here
mov r5, __bss_start
sub r6, __bss_stop, r5
lsr.f lp_count, r6, 2
lpnz 1f
st.ab 0, [r5, 4]
1:
; Uboot - kernel ABI
; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
; r1 = magic number (always zero as of now)
; r2 = pointer to uboot provided cmdline or external DTB in mem
; These are handled later in handle_uboot_args()
st r0, [@uboot_tag]
st r1, [@uboot_magic]
st r2, [@uboot_arg]
; setup "current" tsk and optionally cache it in dedicated r25
mov r9, @init_task
SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch
; setup stack (fp, sp)
mov fp, 0
; tsk->thread_info is really a PAGE, whose bottom hoists stack
GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output)
j start_kernel ; "C" entry point
END(stext)
#ifdef CONFIG_SMP
;----------------------------------------------------------------
; First lines of code run by secondary before jumping to 'C'
;----------------------------------------------------------------
.section .text, "ax",@progbits
ENTRY(first_lines_of_secondary)
; setup per-cpu idle task as "current" on this CPU
ld r0, [@secondary_idle_tsk]
SET_CURR_TASK_ON_CPU r0, r1
; setup stack (fp, sp)
mov fp, 0
; set its stack base to tsk->thread_info bottom
GET_TSK_STACK_BASE r0, sp
j start_kernel_secondary
END(first_lines_of_secondary)
#endif