1e5c693348
Qualcomm PAS devices expect exactly one memory region, not many. Also,
the memory-region is now defined in device specific binding, not in
qcom,pas-common.yaml, thus also require it in the same place.
Fixes: cee616c688 ("dt-bindings: remoteproc: qcom: adsp: move memory-region and firmware-name out of pas-common")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230713072242.11268-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
111 lines
2.7 KiB
YAML
111 lines
2.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/remoteproc/qcom,sdx55-pas.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm SDX55 Peripheral Authentication Service
|
|
|
|
maintainers:
|
|
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
|
|
description:
|
|
Qualcomm SDX55 SoC Peripheral Authentication Service loads and boots firmware
|
|
on the Qualcomm DSP Hexagon cores.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,sdx55-mpss-pas
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: XO clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: xo
|
|
|
|
interrupts:
|
|
minItems: 6
|
|
|
|
interrupt-names:
|
|
minItems: 6
|
|
|
|
power-domains:
|
|
items:
|
|
- description: CX power domain
|
|
- description: MSS power domain
|
|
|
|
power-domain-names:
|
|
items:
|
|
- const: cx
|
|
- const: mss
|
|
|
|
memory-region:
|
|
maxItems: 1
|
|
description: Reference to the reserved-memory for the Hexagon core
|
|
|
|
qcom,qmp:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: Reference to the AOSS side-channel message RAM.
|
|
|
|
smd-edge: false
|
|
|
|
firmware-name:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description: Firmware name for the Hexagon core
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- memory-region
|
|
|
|
allOf:
|
|
- $ref: /schemas/remoteproc/qcom,pas-common.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
|
|
|
remoteproc@4080000 {
|
|
compatible = "qcom,sdx55-mpss-pas";
|
|
reg = <0x04080000 0x4040>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover",
|
|
"stop-ack", "shutdown-ack";
|
|
|
|
memory-region = <&mpss_adsp_mem>;
|
|
|
|
power-domains = <&rpmhpd SDX55_CX>, <&rpmhpd SDX55_MSS>;
|
|
power-domain-names = "cx", "mss";
|
|
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
glink-edge {
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
|
|
label = "mpss";
|
|
mboxes = <&apcs 15>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
/* ... */
|
|
};
|
|
};
|