22fe322397
Add StarFive JH7110 SoC PCIe controller dt-bindings. JH7110 uses PLDA XpressRICH PCIe host controller IP. Link: https://lore.kernel.org/linux-pci/20240328091835.14797-20-minda.chen@starfivetech.com Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Kevin Xie <kevin.xie@starfivetech.com>
121 lines
3.2 KiB
YAML
121 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: StarFive JH7110 PCIe host controller
|
|
|
|
maintainers:
|
|
- Kevin Xie <kevin.xie@starfivetech.com>
|
|
|
|
allOf:
|
|
- $ref: plda,xpressrich3-axi-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: starfive,jh7110-pcie
|
|
|
|
clocks:
|
|
items:
|
|
- description: NOC bus clock
|
|
- description: Transport layer clock
|
|
- description: AXI MST0 clock
|
|
- description: APB clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: noc
|
|
- const: tl
|
|
- const: axi_mst0
|
|
- const: apb
|
|
|
|
resets:
|
|
items:
|
|
- description: AXI MST0 reset
|
|
- description: AXI SLAVE0 reset
|
|
- description: AXI SLAVE reset
|
|
- description: PCIE BRIDGE reset
|
|
- description: PCIE CORE reset
|
|
- description: PCIE APB reset
|
|
|
|
reset-names:
|
|
items:
|
|
- const: mst0
|
|
- const: slv0
|
|
- const: slv
|
|
- const: brg
|
|
- const: core
|
|
- const: apb
|
|
|
|
starfive,stg-syscon:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
description:
|
|
The phandle to System Register Controller syscon node.
|
|
|
|
perst-gpios:
|
|
description: GPIO controlled connection to PERST# signal
|
|
maxItems: 1
|
|
|
|
phys:
|
|
description:
|
|
Specified PHY is attached to PCIe controller.
|
|
maxItems: 1
|
|
|
|
required:
|
|
- clocks
|
|
- resets
|
|
- starfive,stg-syscon
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
pcie@940000000 {
|
|
compatible = "starfive,jh7110-pcie";
|
|
reg = <0x9 0x40000000 0x0 0x10000000>,
|
|
<0x0 0x2b000000 0x0 0x1000000>;
|
|
reg-names = "cfg", "apb";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
|
|
<0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
|
|
starfive,stg-syscon = <&stg_syscon>;
|
|
bus-range = <0x0 0xff>;
|
|
interrupt-parent = <&plic>;
|
|
interrupts = <56>;
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
|
|
<0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
|
|
<0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
|
|
<0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
|
|
msi-controller;
|
|
clocks = <&syscrg 86>,
|
|
<&stgcrg 10>,
|
|
<&stgcrg 8>,
|
|
<&stgcrg 9>;
|
|
clock-names = "noc", "tl", "axi_mst0", "apb";
|
|
resets = <&stgcrg 11>,
|
|
<&stgcrg 12>,
|
|
<&stgcrg 13>,
|
|
<&stgcrg 14>,
|
|
<&stgcrg 15>,
|
|
<&stgcrg 16>;
|
|
perst-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
|
|
phys = <&pciephy0>;
|
|
|
|
pcie_intc0: interrupt-controller {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
};
|