fbe280ee67
Add a reference to snps,dw-pcie.yaml (and indirectly pci-bus.yaml) schemas. With this, the common bus properties can be dropped from the schema. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210719220351.2662758-1-robh@kernel.org
118 lines
2.3 KiB
YAML
118 lines
2.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: PCIe RC controller on Intel Gateway SoCs
|
|
|
|
maintainers:
|
|
- Rahul Tanwar <rtanwar@maxlinear.com>
|
|
|
|
select:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: intel,lgm-pcie
|
|
required:
|
|
- compatible
|
|
|
|
allOf:
|
|
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- const: intel,lgm-pcie
|
|
- const: snps,dw-pcie
|
|
|
|
reg:
|
|
items:
|
|
- description: Controller control and status registers.
|
|
- description: PCIe configuration registers.
|
|
- description: Controller application registers.
|
|
|
|
reg-names:
|
|
items:
|
|
- const: dbi
|
|
- const: config
|
|
- const: app
|
|
|
|
ranges:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
phys:
|
|
maxItems: 1
|
|
|
|
phy-names:
|
|
const: pcie
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
|
|
num-lanes:
|
|
maximum: 2
|
|
|
|
max-link-speed:
|
|
enum: [1, 2, 3, 4]
|
|
default: 1
|
|
|
|
reset-assert-ms:
|
|
description: |
|
|
Delay after asserting reset to the PCIe device.
|
|
maximum: 500
|
|
default: 100
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- ranges
|
|
- resets
|
|
- clocks
|
|
- phys
|
|
- phy-names
|
|
- reset-gpios
|
|
- '#interrupt-cells'
|
|
- interrupt-map
|
|
- interrupt-map-mask
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
pcie10: pcie@d0e00000 {
|
|
compatible = "intel,lgm-pcie", "snps,dw-pcie";
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
reg = <0xd0e00000 0x1000>,
|
|
<0xd2000000 0x800000>,
|
|
<0xd0a41000 0x1000>;
|
|
reg-names = "dbi", "config", "app";
|
|
linux,pci-domain = <0>;
|
|
max-link-speed = <4>;
|
|
bus-range = <0x00 0x08>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &ioapic1 27 1>,
|
|
<0 0 0 2 &ioapic1 28 1>,
|
|
<0 0 0 3 &ioapic1 29 1>,
|
|
<0 0 0 4 &ioapic1 30 1>;
|
|
ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
|
|
resets = <&rcu0 0x50 0>;
|
|
clocks = <&cgu0 120>;
|
|
phys = <&cb0phy0>;
|
|
phy-names = "pcie";
|
|
reset-assert-ms = <500>;
|
|
reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
num-lanes = <2>;
|
|
};
|