1
linux/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
Rob Herring b675542323 dt-bindings: display: Use OF graph schema
Now that we have a graph schema, rework the display related schemas to use
it. Mostly this is adding a reference to graph.yaml and dropping duplicate
parts from schemas.

In panel-common.yaml, 'ports' is dropped. Any binding using 'ports'
should be one with more than 1 port node, and the binding must define
what each port is.

Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will
need further updates to use video-interfaces.yaml once that lands.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org
2021-01-11 18:03:59 -06:00

72 lines
1.3 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DVI Connector
maintainers:
- Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
properties:
compatible:
const: dvi-connector
label: true
hpd-gpios:
description: A GPIO line connected to HPD
maxItems: 1
ddc-i2c-bus:
description: phandle link to the I2C controller used for DDC EDID probing
$ref: /schemas/types.yaml#/definitions/phandle
analog:
type: boolean
description: the connector has DVI analog pins
digital:
type: boolean
description: the connector has DVI digital pins
dual-link:
type: boolean
description: the connector has pins for DVI dual-link
port:
$ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing DVI signals
required:
- compatible
- port
anyOf:
- required:
- analog
- required:
- digital
additionalProperties: false
examples:
- |
connector {
compatible = "dvi-connector";
label = "dvi";
digital;
ddc-i2c-bus = <&i2c3>;
port {
dvi_connector_in: endpoint {
remote-endpoint = <&tfp410_out>;
};
};
};
...