47aab53331
Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
53 lines
1.2 KiB
Plaintext
53 lines
1.2 KiB
Plaintext
* NXP LPC1850 CREG clocks
|
|
|
|
The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
|
|
control registers for two low speed clocks. One of the clocks is a
|
|
32 kHz oscillator driver with power up/down and clock gating. Next
|
|
is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
|
|
|
|
These clocks are used by the RTC and the Event Router peripherals.
|
|
The 32 kHz can also be routed to other peripherals to enable low
|
|
power modes.
|
|
|
|
This binding uses the common clock binding:
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible:
|
|
Should be "nxp,lpc1850-creg-clk"
|
|
- #clock-cells:
|
|
Shall have value <1>.
|
|
- clocks:
|
|
Shall contain a phandle to the fixed 32 kHz crystal.
|
|
|
|
The creg-clk node must be a child of the creg syscon node.
|
|
|
|
The following clocks are available from the clock node.
|
|
|
|
Clock ID Name
|
|
0 1 kHz clock
|
|
1 32 kHz Oscillator
|
|
|
|
Example:
|
|
soc {
|
|
creg: syscon@40043000 {
|
|
compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
|
|
reg = <0x40043000 0x1000>;
|
|
|
|
creg_clk: clock-controller {
|
|
compatible = "nxp,lpc1850-creg-clk";
|
|
clocks = <&xtal32>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
...
|
|
};
|
|
|
|
rtc: rtc@40046000 {
|
|
...
|
|
clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
|
|
clock-names = "rtc", "reg";
|
|
...
|
|
};
|
|
};
|