linux/Documentation/arch/x86/pti.rst

.. SPDX-License-Identifier: GPL-2.0

==========================
Page Table Isolation (PTI)
==========================

Overview
========

Page Table Isolation (pti, previously known as KAISER [1]_) is a
countermeasure against attacks on the shared user/kernel address
space such as the "Meltdown" approach [2]_.

To mitigate this class of attacks, we create an independent set of
page tables for use only when running userspace applications.  When
the kernel is entered via syscalls, interrupts or exceptions, the
page tables are switched to the full "kernel" copy.  When the system
switches back to user mode, the user copy is used again.

The userspace page tables contain only a minimal amount of kernel
data: only what is needed to enter/exit the kernel such as the
entry/exit functions themselves and the interrupt descriptor table
(IDT).  There are a few strictly unnecessary things that get mapped
such as the first C function when entering an interrupt (see
comments in pti.c).

This approach helps to ensure that side-channel attacks leveraging
the paging structures do not function when PTI is enabled.  It can be
enabled by setting CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y at compile
time.  Once enabled at compile-time, it can be disabled at boot with
the 'nopti' or 'pti=' kernel parameters (see kernel-parameters.txt).

Page Table Management
=====================

When PTI is enabled, the kernel manages two sets of page tables.
The first set is very similar to the single set which is present in
kernels without PTI.  This includes a complete mapping of userspace
that the kernel can use for things like copy_to_user().

Although _complete_, the user portion of the kernel page tables is
crippled by setting the NX bit in the top level.  This ensures
that any missed kernel->user CR3 switch will immediately crash
userspace upon executing its first instruction.

The userspace page tables map only the kernel data needed to enter
and exit the kernel.  This data is entirely contained in the 'struct
cpu_entry_area' structure which is placed in the fixmap which gives
each CPU's copy of the area a compile-time-fixed virtual address.

For new userspace mappings, the kernel makes the entries in its
page tables like normal.  The only difference is when the kernel
makes entries in the top (PGD) level.  In addition to setting the
entry in the main kernel PGD, a copy of the entry is made in the
userspace page tables' PGD.

This sharing at the PGD level also inherently shares all the lower
layers of the page tables.  This leaves a single, shared set of
userspace page tables to manage.  One PTE to lock, one set of
accessed bits, dirty bits, etc...

Overhead
========

Protection against side-channel attacks is important.  But,
this protection comes at a cost:

1. Increased Memory Use

  a. Each process now needs an order-1 PGD instead of order-0.
     (Consumes an additional 4k per process).
  b. The 'cpu_entry_area' structure must be 2MB in size and 2MB
     aligned so that it can be mapped by setting a single PMD
     entry.  This consumes nearly 2MB of RAM once the kernel
     is decompressed, but no space in the kernel image itself.

2. Runtime Cost

  a. CR3 manipulation to switch between the page table copies
     must be done at interrupt, syscall, and exception entry
     and exit (it can be skipped when the kernel is interrupted,
     though.)  Moves to CR3 are on the order of a hundred
     cycles, and are required at every entry and exit.
  b. Percpu TSS is mapped into the user page tables to allow SYSCALL64 path
     to work under PTI. This doesn't have a direct runtime cost but it can
     be argued it opens certain timing attack scenarios.
  c. Global pages are disabled for all kernel structures not
     mapped into both kernel and userspace page tables.  This
     feature of the MMU allows different processes to share TLB
     entries mapping the kernel.  Losing the feature means more
     TLB misses after a context switch.  The actual loss of
     performance is very small, however, never exceeding 1%.
  d. Process Context IDentifiers (PCID) is a CPU feature that
     allows us to skip flushing the entire TLB when switching page
     tables by setting a special bit in CR3 when the page tables
     are changed.  This makes switching the page tables (at context
     switch, or kernel entry/exit) cheaper.  But, on systems with
     PCID support, the context switch code must flush both the user
     and kernel entries out of the TLB.  The user PCID TLB flush is
     deferred until the exit to userspace, minimizing the cost.
     See intel.com/sdm for the gory PCID/INVPCID details.
  e. The userspace page tables must be populated for each new
     process.  Even without PTI, the shared kernel mappings
     are created by copying top-level (PGD) entries into each
     new process.  But, with PTI, there are now *two* kernel
     mappings: one in the kernel page tables that maps everything
     and one for the entry/exit structures.  At fork(), we need to
     copy both.
  f. In addition to the fork()-time copying, there must also
     be an update to the userspace PGD any time a set_pgd() is done
     on a PGD used to map userspace.  This ensures that the kernel
     and userspace copies always map the same userspace
     memory.
  g. On systems without PCID support, each CR3 write flushes
     the entire TLB.  That means that each syscall, interrupt
     or exception flushes the TLB.
  h. INVPCID is a TLB-flushing instruction which allows flushing
     of TLB entries for non-current PCIDs.  Some systems support
     PCIDs, but do not support INVPCID.  On these systems, addresses
     can only be flushed from the TLB for the current PCID.  When
     flushing a kernel address, we need to flush all PCIDs, so a
     single kernel address flush will require a TLB-flushing CR3
     write upon the next use of every PCID.

Possible Future Work
====================
1. We can be more careful about not actually writing to CR3
   unless its value is actually changed.
2. Allow PTI to be enabled/disabled at runtime in addition to the
   boot-time switching.

Testing
========

To test stability of PTI, the following test procedure is recommended,
ideally doing all of these in parallel:

1. Set CONFIG_DEBUG_ENTRY=y
2. Run several copies of all of the tools/testing/selftests/x86/ tests
   (excluding MPX and protection_keys) in a loop on multiple CPUs for
   several minutes.  These tests frequently uncover corner cases in the
   kernel entry code.  In general, old kernels might cause these tests
   themselves to crash, but they should never crash the kernel.
3. Run the 'perf' tool in a mode (top or record) that generates many
   frequent performance monitoring non-maskable interrupts (see "NMI"
   in /proc/interrupts).  This exercises the NMI entry/exit code which
   is known to trigger bugs in code paths that did not expect to be
   interrupted, including nested NMIs.  Using "-c" boosts the rate of
   NMIs, and using two -c with separate counters encourages nested NMIs
   and less deterministic behavior.
   ::

	while true; do perf record -c 10000 -e instructions,cycles -a sleep 10; done

4. Launch a KVM virtual machine.
5. Run 32-bit binaries on systems supporting the SYSCALL instruction.
   This has been a lightly-tested code path and needs extra scrutiny.

Debugging
=========

Bugs in PTI cause a few different signatures of crashes
that are worth noting here.

 * Failures of the selftests/x86 code.  Usually a bug in one of the
   more obscure corners of entry_64.S
 * Crashes in early boot, especially around CPU bringup.  Bugs
   in the mappings cause these.
 * Crashes at the first interrupt.  Caused by bugs in entry_64.S,
   like screwing up a page table switch.  Also caused by
   incorrectly mapping the IRQ handler entry code.
 * Crashes at the first NMI.  The NMI code is separate from main
   interrupt handlers and can have bugs that do not affect
   normal interrupts.  Also caused by incorrectly mapping NMI
   code.  NMIs that interrupt the entry code must be very
   careful and can be the cause of crashes that show up when
   running perf.
 * Kernel crashes at the first exit to userspace.  entry_64.S
   bugs, or failing to map some of the exit code.
 * Crashes at first interrupt that interrupts userspace. The paths
   in entry_64.S that return to userspace are sometimes separate
   from the ones that return to the kernel.
 * Double faults: overflowing the kernel stack because of page
   faults upon page faults.  Caused by touching non-pti-mapped
   data in the entry code, or forgetting to switch to kernel
   CR3 before calling into C functions which are not pti-mapped.
 * Userspace segfaults early in boot, sometimes manifesting
   as mount(8) failing to mount the rootfs.  These have
   tended to be TLB invalidation issues.  Usually invalidating
   the wrong PCID, or otherwise missing an invalidation.

.. [1] https://gruss.cc/files/kaiser.pdf
.. [2] https://meltdownattack.com/meltdown.pdf