#define DEBUG #include #include #include #include #include #include #include "spufs.h" /* interrupt-level stop callback function. */ void spufs_stop_callback(struct spu *spu) { struct spu_context *ctx = spu->ctx; /* * It should be impossible to preempt a context while an exception * is being processed, since the context switch code is specially * coded to deal with interrupts ... But, just in case, sanity check * the context pointer. It is OK to return doing nothing since * the exception will be regenerated when the context is resumed. */ if (ctx) { /* Copy exception arguments into module specific structure */ ctx->csa.class_0_pending = spu->class_0_pending; ctx->csa.dsisr = spu->dsisr; ctx->csa.dar = spu->dar; /* ensure that the exception status has hit memory before a * thread waiting on the context's stop queue is woken */ smp_wmb(); wake_up_all(&ctx->stop_wq); } /* Clear callback arguments from spu structure */ spu->class_0_pending = 0; spu->dsisr = 0; spu->dar = 0; } static inline int spu_stopped(struct spu_context *ctx, u32 *stat) { struct spu *spu; u64 pte_fault; *stat = ctx->ops->status_read(ctx); spu = ctx->spu; if (ctx->state != SPU_STATE_RUNNABLE || test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; pte_fault = ctx->csa.dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED); return (!(*stat & SPU_STATUS_RUNNING) || pte_fault || ctx->csa.class_0_pending) ? 1 : 0; } static int spu_setup_isolated(struct spu_context *ctx) { int ret; u64 __iomem *mfc_cntl; u64 sr1; u32 status; unsigned long timeout; const u32 status_loading = SPU_STATUS_RUNNING | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; ret = -ENODEV; if (!isolated_loader) goto out; /* * We need to exclude userspace access to the context. * * To protect against memory access we invalidate all ptes * and make sure the pagefault handlers block on the mutex. */ spu_unmap_mappings(ctx); mfc_cntl = &ctx->spu->priv2->mfc_control_RW; /* purge the MFC DMA queue to ensure no spurious accesses before we * enter kernel mode */ timeout = jiffies + HZ; out_be64(mfc_cntl, MFC_CNTL_PURGE_DMA_REQUEST); while ((in_be64(mfc_cntl) & MFC_CNTL_PURGE_DMA_STATUS_MASK) != MFC_CNTL_PURGE_DMA_COMPLETE) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", __FUNCTION__); ret = -EIO; goto out; } cond_resched(); } /* put the SPE in kernel mode to allow access to the loader */ sr1 = spu_mfc_sr1_get(ctx->spu); sr1 &= ~MFC_STATE1_PROBLEM_STATE_MASK; spu_mfc_sr1_set(ctx->spu, sr1); /* start the loader */ ctx->ops->signal1_write(ctx, (unsigned long)isolated_loader >> 32); ctx->ops->signal2_write(ctx, (unsigned long)isolated_loader & 0xffffffff); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); ret = 0; timeout = jiffies + HZ; while (((status = ctx->ops->status_read(ctx)) & status_loading) == status_loading) { if (time_after(jiffies, timeout)) { printk(KERN_ERR "%s: timeout waiting for loader\n", __FUNCTION__); ret = -EIO; goto out_drop_priv; } cond_resched(); } if (!(status & SPU_STATUS_RUNNING)) { /* If isolated LOAD has failed: run SPU, we will get a stop-and * signal later. */ pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); ret = -EACCES; goto out_drop_priv; } if (!(status & SPU_STATUS_ISOLATED_STATE)) { /* This isn't allowed by the CBEA, but check anyway */ pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); ret = -EINVAL; goto out_drop_priv; } out_drop_priv: /* Finished accessing the loader. Drop kernel mode */ sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; spu_mfc_sr1_set(ctx->spu, sr1); out: return ret; } static int spu_run_init(struct spu_context *ctx, u32 *npc) { unsigned long runcntl; spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); if (ctx->flags & SPU_CREATE_ISOLATE) { if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) { int ret = spu_setup_isolated(ctx); if (ret) return ret; } /* if userspace has set the runcntrl register (eg, to issue an * isolated exit), we need to re-set it here */ runcntl = ctx->ops->runcntl_read(ctx) & (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; } else { unsigned long privcntl; if (test_thread_flag(TIF_SINGLESTEP)) privcntl = SPU_PRIVCNTL_MODE_SINGLE_STEP; else privcntl = SPU_PRIVCNTL_MODE_NORMAL; runcntl = SPU_RUNCNTL_RUNNABLE; ctx->ops->npc_write(ctx, *npc); ctx->ops->privcntl_write(ctx, privcntl); } ctx->ops->runcntl_write(ctx, runcntl); spuctx_switch_state(ctx, SPU_UTIL_USER); return 0; } static int spu_run_fini(struct spu_context *ctx, u32 *npc, u32 *status) { int ret = 0; *status = ctx->ops->status_read(ctx); *npc = ctx->ops->npc_read(ctx); spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); spu_release(ctx); if (signal_pending(current)) ret = -ERESTARTSYS; return ret; } static int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, u32 *status) { int ret; ret = spu_run_fini(ctx, npc, status); if (ret) return ret; if (*status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT)) return *status; ret = spu_acquire_runnable(ctx, 0); if (ret) return ret; spuctx_switch_state(ctx, SPU_UTIL_USER); return 0; } /* * SPU syscall restarting is tricky because we violate the basic * assumption that the signal handler is running on the interrupted * thread. Here instead, the handler runs on PowerPC user space code, * while the syscall was called from the SPU. * This means we can only do a very rough approximation of POSIX * signal semantics. */ static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret, unsigned int *npc) { int ret; switch (*spu_ret) { case -ERESTARTSYS: case -ERESTARTNOINTR: /* * Enter the regular syscall restarting for * sys_spu_run, then restart the SPU syscall * callback. */ *npc -= 8; ret = -ERESTARTSYS; break; case -ERESTARTNOHAND: case -ERESTART_RESTARTBLOCK: /* * Restart block is too hard for now, just return -EINTR * to the SPU. * ERESTARTNOHAND comes from sys_pause, we also return * -EINTR from there. * Assume that we need to be restarted ourselves though. */ *spu_ret = -EINTR; ret = -ERESTARTSYS; break; default: printk(KERN_WARNING "%s: unexpected return code %ld\n", __FUNCTION__, *spu_ret); ret = 0; } return ret; } static int spu_process_callback(struct spu_context *ctx) { struct spu_syscall_block s; u32 ls_pointer, npc; void __iomem *ls; long spu_ret; int ret; /* get syscall block from local store */ npc = ctx->ops->npc_read(ctx) & ~3; ls = (void __iomem *)ctx->ops->get_ls(ctx); ls_pointer = in_be32(ls + npc); if (ls_pointer > (LS_SIZE - sizeof(s))) return -EFAULT; memcpy_fromio(&s, ls + ls_pointer, sizeof(s)); /* do actual syscall without pinning the spu */ ret = 0; spu_ret = -ENOSYS; npc += 4; if (s.nr_ret < __NR_syscalls) { spu_release(ctx); /* do actual system call from here */ spu_ret = spu_sys_callback(&s); if (spu_ret <= -ERESTARTSYS) { ret = spu_handle_restartsys(ctx, &spu_ret, &npc); } spu_acquire(ctx); if (ret == -ERESTARTSYS) return ret; } /* write result, jump over indirect pointer */ memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret)); ctx->ops->npc_write(ctx, npc); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); return ret; } long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event) { int ret; struct spu *spu; u32 status; if (mutex_lock_interruptible(&ctx->run_mutex)) return -ERESTARTSYS; spu_enable_spu(ctx); ctx->event_return = 0; spu_acquire(ctx); if (ctx->state == SPU_STATE_SAVED) { __spu_update_sched_info(ctx); spu_set_timeslice(ctx); ret = spu_activate(ctx, 0); if (ret) { spu_release(ctx); goto out; } } else { /* * We have to update the scheduling priority under active_mutex * to protect against find_victim(). * * No need to update the timeslice ASAP, it will get updated * once the current one has expired. */ spu_update_sched_info(ctx); } ret = spu_run_init(ctx, npc); if (ret) { spu_release(ctx); goto out; } do { ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, &status)); if (unlikely(ret)) break; spu = ctx->spu; if (unlikely(test_and_clear_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))) { if (!(status & SPU_STATUS_STOPPED_BY_STOP)) { spu_switch_notify(spu, ctx); continue; } } spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); if ((status & SPU_STATUS_STOPPED_BY_STOP) && (status >> SPU_STOP_STATUS_SHIFT == 0x2104)) { ret = spu_process_callback(ctx); if (ret) break; status &= ~SPU_STATUS_STOPPED_BY_STOP; } ret = spufs_handle_class1(ctx); if (ret) break; ret = spufs_handle_class0(ctx); if (ret) break; if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); if (ret) goto out2; continue; } if (signal_pending(current)) ret = -ERESTARTSYS; } while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_SINGLE_STEP))); if ((status & SPU_STATUS_STOPPED_BY_STOP) && (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100) && (ctx->state == SPU_STATE_RUNNABLE)) ctx->stats.libassist++; spu_disable_spu(ctx); ret = spu_run_fini(ctx, npc, &status); spu_yield(ctx); out2: if ((ret == 0) || ((ret == -ERESTARTSYS) && ((status & SPU_STATUS_STOPPED_BY_HALT) || (status & SPU_STATUS_SINGLE_STEP) || ((status & SPU_STATUS_STOPPED_BY_STOP) && (status >> SPU_STOP_STATUS_SHIFT != 0x2104))))) ret = status; /* Note: we don't need to force_sig SIGTRAP on single-step * since we have TIF_SINGLESTEP set, thus the kernel will do * it upon return from the syscall anyawy */ if ((status & SPU_STATUS_STOPPED_BY_STOP) && (status >> SPU_STOP_STATUS_SHIFT) == 0x3fff) { force_sig(SIGTRAP, current); ret = -ERESTARTSYS; } out: *event = ctx->event_return; mutex_unlock(&ctx->run_mutex); return ret; }