# # Generic video config states # config VIDEO_V4L2 tristate depends on VIDEO_DEV && VIDEO_V4L2_COMMON default VIDEO_DEV && VIDEO_V4L2_COMMON config VIDEO_V4L1 tristate depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1 config VIDEOBUF_GEN tristate config VIDEOBUF_DMA_SG depends on HAS_DMA select VIDEOBUF_GEN tristate config VIDEOBUF_VMALLOC select VIDEOBUF_GEN tristate config VIDEOBUF_DMA_CONTIG depends on HAS_DMA select VIDEOBUF_GEN tristate config VIDEOBUF_DVB tristate select VIDEOBUF_GEN config VIDEO_BTCX depends on PCI tristate config VIDEO_TVEEPROM tristate depends on I2C config VIDEO_TUNER tristate depends on MEDIA_TUNER config V4L2_MEM2MEM_DEV tristate depends on VIDEOBUF_GEN # # Multimedia Video device configuration # menuconfig VIDEO_CAPTURE_DRIVERS bool "Video capture adapters" depends on VIDEO_V4L2 default y ---help--- Say Y here to enable selecting the video adapters for webcams, analog TV, and hybrid analog/digital TV. Some of those devices also supports FM radio. if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 config VIDEO_ADV_DEBUG bool "Enable advanced debug functionality" default n ---help--- Say Y here to enable advanced debugging functionality on some V4L devices. In doubt, say N. config VIDEO_FIXED_MINOR_RANGES bool "Enable old-style fixed minor ranges for video devices" default n ---help--- Say Y here to enable the old-style fixed-range minor assignments. Only useful if you rely on the old behavior and use mknod instead of udev. When in doubt, say N. config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" default y ---help--- Most video cards may require additional modules to encode or decode audio/video standards. This option will autoselect all pertinent modules to each selected video module. Unselect this only if you know exactly what you are doing, since it may break support on some boards. In doubt, say Y. config VIDEO_IR_I2C tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO depends on I2C && VIDEO_IR default y ---help--- Most boards have an IR chip directly connected via GPIO. However, some video boards have the IR connected via I2C bus. If your board doesn't have an I2C IR chip, you may disable this option. In doubt, say Y. # # Encoder / Decoder module configuration # menu "Encoders/decoders and other helper chips" depends on !VIDEO_HELPER_CHIPS_AUTO comment "Audio decoders" config VIDEO_TVAUDIO tristate "Simple audio decoder chips" depends on VIDEO_V4L2 && I2C ---help--- Support for several audio decoder chips found on some bt8xx boards: Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300, tea6320, tea6420, tda8425, ta8874z. Microchip: pic16c54 based design on ProVideo PV951 board. To compile this driver as a module, choose M here: the module will be called tvaudio. config VIDEO_TDA7432 tristate "Philips TDA7432 audio processor" depends on VIDEO_V4L2 && I2C ---help--- Support for tda7432 audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the module will be called tda7432. config VIDEO_TDA9840 tristate "Philips TDA9840 audio processor" depends on I2C ---help--- Support for tda9840 audio decoder chip found on some Zoran boards. To compile this driver as a module, choose M here: the module will be called tda9840. config VIDEO_TDA9875 tristate "Philips TDA9875 audio processor" depends on VIDEO_V4L2 && I2C ---help--- Support for tda9875 audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the module will be called tda9875. config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C ---help--- Support for tea6415c audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the module will be called tea6415c. config VIDEO_TEA6420 tristate "Philips TEA6420 audio processor" depends on I2C ---help--- Support for tea6420 audio decoder chip found on some bt8xx boards. To compile this driver as a module, choose M here: the module will be called tea6420. config VIDEO_MSP3400 tristate "Micronas MSP34xx audio decoders" depends on VIDEO_V4L2 && I2C ---help--- Support for the Micronas MSP34xx series of audio decoders. To compile this driver as a module, choose M here: the module will be called msp3400. config VIDEO_CS5345 tristate "Cirrus Logic CS5345 audio ADC" depends on VIDEO_V4L2 && I2C ---help--- Support for the Cirrus Logic CS5345 24-bit, 192 kHz stereo A/D converter. To compile this driver as a module, choose M here: the module will be called cs5345. config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" depends on VIDEO_V4L2 && I2C ---help--- Support for the Cirrus Logic CS53L32A low voltage stereo A/D converter. To compile this driver as a module, choose M here: the module will be called cs53l32a. config VIDEO_M52790 tristate "Mitsubishi M52790 A/V switch" depends on VIDEO_V4L2 && I2C ---help--- Support for the Mitsubishi M52790 A/V switch. To compile this driver as a module, choose M here: the module will be called m52790. config VIDEO_TLV320AIC23B tristate "Texas Instruments TLV320AIC23B audio codec" depends on VIDEO_V4L2 && I2C && EXPERIMENTAL ---help--- Support for the Texas Instruments TLV320AIC23B audio codec. To compile this driver as a module, choose M here: the module will be called tlv320aic23b. config VIDEO_WM8775 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer" depends on VIDEO_V4L2 && I2C ---help--- Support for the Wolfson Microelectronics WM8775 high performance stereo A/D Converter with a 4 channel input mixer. To compile this driver as a module, choose M here: the module will be called wm8775. config VIDEO_WM8739 tristate "Wolfson Microelectronics WM8739 stereo audio ADC" depends on VIDEO_V4L2 && I2C ---help--- Support for the Wolfson Microelectronics WM8739 stereo A/D Converter. To compile this driver as a module, choose M here: the module will be called wm8739. config VIDEO_VP27SMPX tristate "Panasonic VP27s internal MPX" depends on VIDEO_V4L2 && I2C ---help--- Support for the internal MPX of the Panasonic VP27s tuner. To compile this driver as a module, choose M here: the module will be called vp27smpx. comment "RDS decoders" config VIDEO_SAA6588 tristate "SAA6588 Radio Chip RDS decoder support" depends on VIDEO_V4L2 && I2C help Support for this Radio Data System (RDS) decoder. This allows seeing radio station identification transmitted using this standard. To compile this driver as a module, choose M here: the module will be called saa6588. comment "Video decoders" config VIDEO_ADV7180 tristate "Analog Devices ADV7180 decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7180 video decoder. To compile this driver as a module, choose M here: the module will be called adv7180. config VIDEO_BT819 tristate "BT819A VideoStream decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for BT819A video decoder. To compile this driver as a module, choose M here: the module will be called bt819. config VIDEO_BT856 tristate "BT856 VideoStream decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for BT856 video decoder. To compile this driver as a module, choose M here: the module will be called bt856. config VIDEO_BT866 tristate "BT866 VideoStream decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for BT866 video decoder. To compile this driver as a module, choose M here: the module will be called bt866. config VIDEO_KS0127 tristate "KS0127 video decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for KS0127 video decoder. This chip is used on AverMedia AVS6EYES Zoran-based MJPEG cards. To compile this driver as a module, choose M here: the module will be called ks0127. config VIDEO_OV7670 tristate "OmniVision OV7670 sensor support" depends on I2C && VIDEO_V4L2 ---help--- This is a Video4Linux2 sensor-level driver for the OmniVision OV7670 VGA camera. It currently only works with the M88ALP01 controller. config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" depends on I2C && VIDEO_V4L2 ---help--- This is a Video4Linux2 sensor-level driver for the Micron mt0v011 1.3 Mpixel camera. It currently only works with the em28xx driver. config VIDEO_TCM825X tristate "TCM825x camera sensor support" depends on I2C && VIDEO_V4L2 ---help--- This is a driver for the Toshiba TCM825x VGA camera sensor. It is used for example in Nokia N800. config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7110 video decoders. To compile this driver as a module, choose M here: the module will be called saa7110. config VIDEO_SAA711X tristate "Philips SAA7111/3/4/5 video decoders" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7111/3/4/5 video decoders. To compile this driver as a module, choose M here: the module will be called saa7115. config VIDEO_SAA717X tristate "Philips SAA7171/3/4 audio/video decoders" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7171/3/4 audio/video decoders. To compile this driver as a module, choose M here: the module will be called saa717x. config VIDEO_SAA7191 tristate "Philips SAA7191 video decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7191 video decoder. To compile this driver as a module, choose M here: the module will be called saa7191. config VIDEO_TVP514X tristate "Texas Instruments TVP514x video decoder" depends on VIDEO_V4L2 && I2C ---help--- This is a Video4Linux2 sensor-level driver for the TI TVP5146/47 decoder. It is currently working with the TI OMAP3 camera controller. To compile this driver as a module, choose M here: the module will be called tvp514x. config VIDEO_TVP5150 tristate "Texas Instruments TVP5150 video decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Texas Instruments TVP5150 video decoder. To compile this driver as a module, choose M here: the module will be called tvp5150. config VIDEO_TVP7002 tristate "Texas Instruments TVP7002 video decoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Texas Instruments TVP7002 video decoder. To compile this driver as a module, choose M here: the module will be called tvp7002. config VIDEO_VPX3220 tristate "vpx3220a, vpx3216b & vpx3214c video decoders" depends on VIDEO_V4L2 && I2C ---help--- Support for VPX322x video decoders. To compile this driver as a module, choose M here: the module will be called vpx3220. comment "Video and audio decoders" source "drivers/media/video/cx25840/Kconfig" comment "MPEG video encoders" config VIDEO_CX2341X tristate "Conexant CX2341x MPEG encoders" depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON ---help--- Support for the Conexant CX23416 MPEG encoders and CX23415 MPEG encoder/decoders. This module currently supports the encoding functions only. To compile this driver as a module, choose M here: the module will be called cx2341x. comment "Video encoders" config VIDEO_SAA7127 tristate "Philips SAA7127/9 digital video encoders" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7127/9 digital video encoders. To compile this driver as a module, choose M here: the module will be called saa7127. config VIDEO_SAA7185 tristate "Philips SAA7185 video encoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7185 video encoder. To compile this driver as a module, choose M here: the module will be called saa7185. config VIDEO_ADV7170 tristate "Analog Devices ADV7170 video encoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7170 video encoder driver To compile this driver as a module, choose M here: the module will be called adv7170. config VIDEO_ADV7175 tristate "Analog Devices ADV7175 video encoder" depends on VIDEO_V4L2 && I2C ---help--- Support for the Analog Devices ADV7175 video encoder driver To compile this driver as a module, choose M here: the module will be called adv7175. config VIDEO_THS7303 tristate "THS7303 Video Amplifier" depends on I2C help Support for TI THS7303 video amplifier To compile this driver as a module, choose M here: the module will be called ths7303. config VIDEO_ADV7343 tristate "ADV7343 video encoder" depends on I2C help Support for Analog Devices I2C bus based ADV7343 encoder. To compile this driver as a module, choose M here: the module will be called adv7343. config VIDEO_AK881X tristate "AK8813/AK8814 video encoders" depends on I2C help Video output driver for AKM AK8813 and AK8814 TV encoders comment "Video improvement chips" config VIDEO_UPD64031A tristate "NEC Electronics uPD64031A Ghost Reduction" depends on VIDEO_V4L2 && I2C ---help--- Support for the NEC Electronics uPD64031A Ghost Reduction video chip. It is most often found in NTSC TV cards made for Japan and is used to reduce the 'ghosting' effect that can be present in analog TV broadcasts. To compile this driver as a module, choose M here: the module will be called upd64031a. config VIDEO_UPD64083 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation" depends on VIDEO_V4L2 && I2C ---help--- Support for the NEC Electronics uPD64083 3-Dimensional Y/C separation video chip. It is used to improve the quality of the colors of a composite signal. To compile this driver as a module, choose M here: the module will be called upd64083. endmenu # encoder / decoder chips config DISPLAY_DAVINCI_DM646X_EVM tristate "DM646x EVM Video Display" depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM select VIDEOBUF_DMA_CONTIG select VIDEO_DAVINCI_VPIF select VIDEO_ADV7343 select VIDEO_THS7303 help Support for DM6467 based display device. To compile this driver as a module, choose M here: the module will be called vpif_display. config VIDEO_SH_VOU tristate "SuperH VOU video output driver" depends on VIDEO_DEV && ARCH_SHMOBILE select VIDEOBUF_DMA_CONTIG help Support for the Video Output Unit (VOU) on SuperH SoCs. config CAPTURE_DAVINCI_DM646X_EVM tristate "DM646x EVM Video Capture" depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM select VIDEOBUF_DMA_CONTIG select VIDEO_DAVINCI_VPIF help Support for DM6467 based capture device. To compile this driver as a module, choose M here: the module will be called vpif_capture. config VIDEO_DAVINCI_VPIF tristate "DaVinci VPIF Driver" depends on DISPLAY_DAVINCI_DM646X_EVM help Support for DaVinci VPIF Driver. To compile this driver as a module, choose M here: the module will be called vpif. config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS select FONT_8x16 select VIDEOBUF_VMALLOC default n ---help--- Enables a virtual video driver. This device shows a color bar and a timestamp, as a real device would generate by using V4L2 api. Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. config VIDEO_VPSS_SYSTEM tristate "VPSS System module driver" depends on ARCH_DAVINCI help Support for vpss system module for video driver config VIDEO_VPFE_CAPTURE tristate "VPFE Video Capture Driver" depends on VIDEO_V4L2 && ARCH_DAVINCI select VIDEOBUF_DMA_CONTIG help Support for DMXXXX VPFE based frame grabber. This is the common V4L2 module for following DMXXX SoCs from Texas Instruments:- DM6446 & DM355. To compile this driver as a module, choose M here: the module will be called vpfe-capture. config VIDEO_DM6446_CCDC tristate "DM6446 CCDC HW module" depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE select VIDEO_VPSS_SYSTEM default y help Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces with decoder modules such as TVP5146 over BT656 or sensor module such as MT9T001 over a raw interface. This module configures the interface and CCDC/ISIF to do video frame capture from slave decoders. To compile this driver as a module, choose M here: the module will be called vpfe. config VIDEO_DM355_CCDC tristate "DM355 CCDC HW module" depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE select VIDEO_VPSS_SYSTEM default y help Enables DM355 CCD hw module. DM355 CCDC hw interfaces with decoder modules such as TVP5146 over BT656 or sensor module such as MT9T001 over a raw interface. This module configures the interface and CCDC/ISIF to do video frame capture from a slave decoders To compile this driver as a module, choose M here: the module will be called vpfe. config VIDEO_ISIF tristate "ISIF HW module" depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE select VIDEO_VPSS_SYSTEM default y help Enables ISIF hw module. This is the hardware module for configuring ISIF in VPFE to capture Raw Bayer RGB data from a image sensor or YUV data from a YUV source. To compile this driver as a module, choose M here: the module will be called vpfe. source "drivers/media/video/omap/Kconfig" source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS tristate "Mediavision Pro Movie Studio Video For Linux" depends on ISA && VIDEO_V4L2 help Say Y if you have such a thing. To compile this driver as a module, choose M here: the module will be called pms. config VIDEO_BWQCAM tristate "Quickcam BW Video For Linux" depends on PARPORT && VIDEO_V4L2 help Say Y have if you the black and white version of the QuickCam camera. See the next option for the color version. To compile this driver as a module, choose M here: the module will be called bw-qcam. config VIDEO_CQCAM tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2 help This is the video4linux driver for the colour version of the Connectix QuickCam. If you have one of these cameras, say Y here, otherwise say N. This driver does not work with the original monochrome QuickCam, QuickCam VC or QuickClip. It is also available as a module (c-qcam). Read for more information. config VIDEO_W9966 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 help Video4linux driver for Winbond's w9966 based Webcams. Currently tested with the LifeView FlyCam Supra. If you have one of these cameras, say Y here otherwise say N. This driver is also available as a module (w9966). Check out for more information. config VIDEO_CPIA tristate "CPiA Video For Linux (DEPRECATED)" depends on VIDEO_V4L1 default n ---help--- This driver is DEPRECATED please use the gspca cpia1 module instead. Note that you need atleast version 0.6.4 of libv4l for the cpia1 gspca module. This is the video4linux driver for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Labs Video Blaster Webcam II. If you have one of these cameras, say Y here and select parallel port and/or USB lowlevel support below, otherwise say N. This will not work with the Creative Webcam III. Please read for more information. This driver is also available as a module (cpia). config VIDEO_CPIA_PP tristate "CPiA Parallel Port Lowlevel Support" depends on PARPORT_1284 && VIDEO_CPIA && PARPORT help This is the lowlevel parallel port support for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Webcam II. If you have the parallel port version of one of these cameras, say Y here, otherwise say N. It is also available as a module (cpia_pp). config VIDEO_CPIA_USB tristate "CPiA USB Lowlevel Support" depends on VIDEO_CPIA && USB help This is the lowlevel USB support for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Webcam II. If you have the USB version of one of these cameras, say Y here, otherwise say N. This will not work with the Creative Webcam III. It is also available as a module (cpia_usb). source "drivers/media/video/cpia2/Kconfig" config VIDEO_SAA5246A tristate "SAA5246A, SAA5281 Teletext processor" depends on I2C && VIDEO_V4L2 help Support for I2C bus based teletext using the SAA5246A or SAA5281 chip. Useful only if you live in Europe. To compile this driver as a module, choose M here: the module will be called saa5246a. config VIDEO_SAA5249 tristate "SAA5249 Teletext processor" depends on I2C && VIDEO_V4L2 help Support for I2C bus based teletext using the SAA5249 chip. At the moment this is only useful on some European WinTV cards. To compile this driver as a module, choose M here: the module will be called saa5249. config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO help Say Y here to build in support for the Vino video input system found on SGI Indy machines. config VIDEO_STRADIS tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS help Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video driver for PCI. There is a product page at . source "drivers/media/video/zoran/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" depends on PCI && SONY_LAPTOP && VIDEO_V4L2 ---help--- This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in for more information. If you say Y or M here, you need to say Y or M to "Sony Laptop Extras" in the misc device section. To compile this driver as a module, choose M here: the module will be called meye. source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO ---help--- This is a video4linux driver for the 'Multimedia eXtension Board' TV card by Siemens-Nixdorf. To compile this driver as a module, choose M here: the module will be called mxb. config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV ---help--- This is a video4linux driver for the Hexium HV-PCI6 and Orion frame grabber cards by Hexium. To compile this driver as a module, choose M here: the module will be called hexium_orion. config VIDEO_HEXIUM_GEMINI tristate "Hexium Gemini frame grabber" depends on PCI && VIDEO_V4L2 && I2C select VIDEO_SAA7146_VV ---help--- This is a video4linux driver for the Hexium Gemini frame grabber card by Hexium. Please note that the Gemini Dual card is *not* fully supported. To compile this driver as a module, choose M here: the module will be called hexium_gemini. source "drivers/media/video/cx88/Kconfig" source "drivers/media/video/cx23885/Kconfig" source "drivers/media/video/au0828/Kconfig" source "drivers/media/video/ivtv/Kconfig" source "drivers/media/video/cx18/Kconfig" source "drivers/media/video/saa7164/Kconfig" config VIDEO_M32R_AR tristate "AR devices" depends on M32R && VIDEO_V4L2 ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) camera module. config VIDEO_M32R_AR_M64278 tristate "AR device with color module M64278(VGA)" depends on PLAT_M32700UT select VIDEO_M32R_AR ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) with M64278E-800 camera module. This module supports VGA(640x480 pixels) resolutions. To compile this driver as a module, choose M here: the module will be called arv. config VIDEO_CAFE_CCIC tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" depends on PCI && I2C && VIDEO_V4L2 select VIDEO_OV7670 ---help--- This is a video4linux2 driver for the Marvell 88ALP01 integrated CMOS camera controller. This is the controller found on first- generation OLPC systems. config SOC_CAMERA tristate "SoC camera support" depends on VIDEO_V4L2 && HAS_DMA && I2C select VIDEOBUF_GEN help SoC Camera is a common API to several cameras, not connecting over a bus like PCI or USB. For example some i2c camera connected directly to the data bus of an SoC. config SOC_CAMERA_MT9M001 tristate "mt9m001 support" depends on SOC_CAMERA && I2C select GPIO_PCA953X if MT9M001_PCA9536_SWITCH help This driver supports MT9M001 cameras from Micron, monochrome and colour models. config SOC_CAMERA_MT9M111 tristate "mt9m111 and mt9m112 support" depends on SOC_CAMERA && I2C help This driver supports MT9M111 and MT9M112 cameras from Micron config SOC_CAMERA_MT9T031 tristate "mt9t031 support" depends on SOC_CAMERA && I2C help This driver supports MT9T031 cameras from Micron. config SOC_CAMERA_MT9T112 tristate "mt9t112 support" depends on SOC_CAMERA && I2C help This driver supports MT9T112 cameras from Aptina. config SOC_CAMERA_MT9V022 tristate "mt9v022 support" depends on SOC_CAMERA && I2C select GPIO_PCA953X if MT9V022_PCA9536_SWITCH help This driver supports MT9V022 cameras from Micron config SOC_CAMERA_RJ54N1 tristate "rj54n1cb0c support" depends on SOC_CAMERA && I2C help This is a rj54n1cb0c video driver config SOC_CAMERA_TW9910 tristate "tw9910 support" depends on SOC_CAMERA && I2C help This is a tw9910 video driver config SOC_CAMERA_PLATFORM tristate "platform camera support" depends on SOC_CAMERA help This is a generic SoC camera platform driver, useful for testing config SOC_CAMERA_OV772X tristate "ov772x camera support" depends on SOC_CAMERA && I2C help This is a ov772x camera driver config SOC_CAMERA_OV9640 tristate "ov9640 camera support" depends on SOC_CAMERA && I2C help This is a ov9640 camera driver config MX1_VIDEO bool config VIDEO_MX1 tristate "i.MX1/i.MXL CMOS Sensor Interface driver" depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA select FIQ select VIDEOBUF_DMA_CONTIG select MX1_VIDEO ---help--- This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface config MX3_VIDEO bool config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA select VIDEOBUF_DMA_CONTIG select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface config VIDEO_PXA27x tristate "PXA27x Quick Capture Interface driver" depends on VIDEO_DEV && PXA27x && SOC_CAMERA select VIDEOBUF_DMA_SG ---help--- This is a v4l2 driver for the PXA27x Quick Capture Interface config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK select VIDEOBUF_DMA_CONTIG ---help--- This is a v4l2 driver for the SuperH Mobile CEU Interface config VIDEO_OMAP2 tristate "OMAP2 Camera Capture Interface driver" depends on VIDEO_DEV && ARCH_OMAP2 select VIDEOBUF_DMA_SG ---help--- This is a v4l2 driver for the TI OMAP2 camera capture interface # # USB Multimedia device configuration # menuconfig V4L_USB_DRIVERS bool "V4L USB devices" depends on USB default y if V4L_USB_DRIVERS && USB source "drivers/media/video/uvc/Kconfig" source "drivers/media/video/gspca/Kconfig" source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/hdpvr/Kconfig" source "drivers/media/video/em28xx/Kconfig" source "drivers/media/video/tlg2300/Kconfig" source "drivers/media/video/cx231xx/Kconfig" source "drivers/media/video/usbvision/Kconfig" source "drivers/media/video/usbvideo/Kconfig" source "drivers/media/video/et61x251/Kconfig" config VIDEO_OVCAMCHIP tristate "OmniVision Camera Chip support (DEPRECATED)" depends on I2C && VIDEO_V4L1 default n ---help--- This driver is DEPRECATED please use the gspca ov519 module instead. Note that for the ov511 / ov518 support of the gspca module you need atleast version 0.6.0 of libv4l and for the w9968cf atleast version 0.6.3 of libv4l. Support for the OmniVision OV6xxx and OV7xxx series of camera chips. This driver is intended to be used with the ov511 and w9968cf USB camera drivers. To compile this driver as a module, choose M here: the module will be called ovcamchip. config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)" depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP default n ---help--- This driver is DEPRECATED please use the gspca ov519 module instead. Note that for the w9968cf support of the gspca module you need atleast version 0.6.3 of libv4l. Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. This driver has an optional plugin, which is distributed as a separate module only (released under GPL). It allows to use higher resolutions and framerates, but cannot be included in the official Linux kernel for performance purposes. See for more info. To compile this driver as a module, choose M here: the module will be called w9968cf. config USB_OV511 tristate "USB OV511 Camera support (DEPRECATED)" depends on VIDEO_V4L1 default n ---help--- This driver is DEPRECATED please use the gspca ov519 module instead. Note that for the ov511 / ov518 support of the gspca module you need atleast version 0.6.0 of libv4l. Say Y here if you want to connect this type of camera to your computer's USB port. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called ov511. config USB_SE401 tristate "USB SE401 Camera support" depends on VIDEO_V4L1 ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called se401. source "drivers/media/video/sn9c102/Kconfig" config USB_STV680 tristate "USB STV680 (Pencam) Camera support (DEPRECATED)" depends on VIDEO_V4L1 default n ---help--- This driver is DEPRECATED please use the gspca stv0680 module instead. Note that for the gspca stv0680 module you need atleast version 0.6.3 of libv4l. Say Y here if you want to connect this type of camera to your computer's USB port. This includes the Pencam line of cameras. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called stv680. source "drivers/media/video/zc0301/Kconfig" source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX tristate "USB ZR364XX Camera support" depends on VIDEO_V4L2 select VIDEOBUF_GEN select VIDEOBUF_VMALLOC ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. See for more info and list of supported cameras. To compile this driver as a module, choose M here: the module will be called zr364xx. config USB_STKWEBCAM tristate "USB Syntek DC1125 Camera support" depends on VIDEO_V4L2 && EXPERIMENTAL ---help--- Say Y here if you want to use this type of camera. Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras may be supported by the stk11xx driver, from which this is derived, see http://stk11xx.sourceforge.net To compile this driver as a module, choose M here: the module will be called stkwebcam. config USB_S2255 tristate "USB Sensoray 2255 video capture device" depends on VIDEO_V4L2 select VIDEOBUF_VMALLOC default n help Say Y here if you want support for the Sensoray 2255 USB device. This driver can be compiled as a module, called s2255drv. endif # V4L_USB_DRIVERS endif # VIDEO_CAPTURE_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS bool "Memory-to-memory multimedia devices" depends on VIDEO_V4L2 default n ---help--- Say Y here to enable selecting drivers for V4L devices that use system memory for both source and destination buffers, as opposed to capture and output drivers, which use memory buffers for just one of those. if V4L_MEM2MEM_DRIVERS config VIDEO_MEM2MEM_TESTDEV tristate "Virtual test device for mem2mem framework" depends on VIDEO_DEV && VIDEO_V4L2 select VIDEOBUF_VMALLOC select V4L2_MEM2MEM_DEV default n ---help--- This is a virtual test device for the memory-to-memory driver framework. endif # V4L_MEM2MEM_DRIVERS