# SPDX-License-Identifier: GPL-2.0 # Copyright (C) 2008-2011 Freescale Semiconductor Inc. %YAML 1.2 --- $id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale SEC 4 maintainers: - '"Horia Geantă" ' - Pankaj Gupta - Gaurav Jain description: | NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator Accelerator and Assurance Module (CAAM). SEC 4 h/w can process requests from 2 types of sources. 1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). 2. Job Rings (HW interface between cores & SEC 4 registers). High Speed Data Path Configuration: HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts such as the P4080. The number of simultaneous dequeues the QI can make is equal to the number of Descriptor Controller (DECO) engines in a particular SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus dequeue from 5 subportals simultaneously. Job Ring Data Path Configuration: Each JR is located on a separate 4k page, they may (or may not) be made visible in the memory partition devoted to a particular core. The P4080 has 4 JRs, so up to 4 JRs can be configured; and all 4 JRs process requests in parallel. properties: compatible: oneOf: - items: - const: fsl,sec-v5.4 - const: fsl,sec-v5.0 - const: fsl,sec-v4.0 - items: - enum: - fsl,imx6ul-caam - fsl,sec-v5.0 - const: fsl,sec-v4.0 - const: fsl,sec-v4.0 reg: maxItems: 1 ranges: maxItems: 1 '#address-cells': enum: [1, 2] '#size-cells': enum: [1, 2] clocks: minItems: 1 maxItems: 4 clock-names: minItems: 1 maxItems: 4 items: enum: [mem, aclk, ipg, emi_slow] dma-coherent: true interrupts: maxItems: 1 fsl,sec-era: description: Defines the 'ERA' of the SEC device. $ref: /schemas/types.yaml#/definitions/uint32 patternProperties: '^jr@[0-9a-f]+$': type: object additionalProperties: false description: Job Ring (JR) Node. Defines data processing interface to SEC 4 across the peripheral bus for purposes of processing cryptographic descriptors. The specified address range can be made visible to one (or more) cores. The interrupt defined for this node is controlled within the address range of this node. properties: compatible: oneOf: - items: - const: fsl,sec-v5.4-job-ring - const: fsl,sec-v5.0-job-ring - const: fsl,sec-v4.0-job-ring - items: - const: fsl,sec-v5.0-job-ring - const: fsl,sec-v4.0-job-ring - const: fsl,sec-v4.0-job-ring reg: maxItems: 1 interrupts: maxItems: 1 fsl,liodn: description: Specifies the LIODN to be used in conjunction with the ppid-to-liodn table that specifies the PPID to LIODN mapping. Needed if the PAMU is used. Value is a 12 bit value where value is a LIODN ID for this JR. This property is normally set by boot firmware. $ref: /schemas/types.yaml#/definitions/uint32 maximum: 0xfff '^rtic@[0-9a-f]+$': type: object additionalProperties: false description: Run Time Integrity Check (RTIC) Node. Defines a register space that contains up to 5 sets of addresses and their lengths (sizes) that will be checked at run time. After an initial hash result is calculated, these addresses are checked by HW to monitor any change. If any memory is modified, a Security Violation is triggered (see SNVS definition). properties: compatible: oneOf: - items: - const: fsl,sec-v5.4-rtic - const: fsl,sec-v5.0-rtic - const: fsl,sec-v4.0-rtic - const: fsl,sec-v4.0-rtic reg: items: - description: RTIC control and status register space. - description: RTIC recoverable error indication register space. minItems: 1 ranges: maxItems: 1 interrupts: maxItems: 1 '#address-cells': const: 1 '#size-cells': const: 1 patternProperties: '^rtic-[a-z]@[0-9a-f]+$': type: object additionalProperties: false description: Run Time Integrity Check (RTIC) Memory Node defines individual RTIC memory regions that are used to perform run-time integrity check of memory areas that should not modified. The node defines a register that contains the memory address & length (combined) and a second register that contains the hash result in big endian format. properties: compatible: oneOf: - items: - const: fsl,sec-v5.4-rtic-memory - const: fsl,sec-v5.0-rtic-memory - const: fsl,sec-v4.0-rtic-memory - const: fsl,sec-v4.0-rtic-memory reg: items: - description: RTIC memory address - description: RTIC hash result fsl,liodn: description: Specifies the LIODN to be used in conjunction with the ppid-to-liodn table that specifies the PPID to LIODN mapping. Needed if the PAMU is used. Value is a 12 bit value where value is a LIODN ID for this JR. This property is normally set by boot firmware. $ref: /schemas/types.yaml#/definitions/uint32 maximum: 0xfff fsl,rtic-region: description: Specifies the HW address (36 bit address) for this region followed by the length of the HW partition to be checked; the address is represented as a 64 bit quantity followed by a 32 bit length. $ref: /schemas/types.yaml#/definitions/uint32-array required: - compatible - reg - ranges additionalProperties: false examples: - | crypto@300000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; reg = <0x300000 0x10000>; ranges = <0 0x300000 0x10000>; interrupts = <92 2>; jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <88 2>; }; jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <89 2>; }; jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <90 2>; }; jr@4000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x4000 0x1000>; interrupts = <91 2>; }; rtic@6000 { compatible = "fsl,sec-v4.0-rtic"; #address-cells = <1>; #size-cells = <1>; reg = <0x6000 0x100>; ranges = <0x0 0x6100 0xe00>; rtic-a@0 { compatible = "fsl,sec-v4.0-rtic-memory"; reg = <0x00 0x20>, <0x100 0x80>; }; rtic-b@20 { compatible = "fsl,sec-v4.0-rtic-memory"; reg = <0x20 0x20>, <0x200 0x80>; }; rtic-c@40 { compatible = "fsl,sec-v4.0-rtic-memory"; reg = <0x40 0x20>, <0x300 0x80>; }; rtic-d@60 { compatible = "fsl,sec-v4.0-rtic-memory"; reg = <0x60 0x20>, <0x500 0x80>; }; }; }; ...