Upon return of a write delegation, the server will almost always bump the
change attribute. Ensure that we pick up that change so that we don't
invalidate our data cache unnecessarily.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In RFC3530, the RENEW operation is allowed to use either
the same principal, RPC security flavour and (if RPCSEC_GSS), the same
mechanism and service that was used for SETCLIENTID_CONFIRM
OR
Any principal, RPC security flavour and service combination that
currently has an OPEN file on the server.
Choose the latter since that doesn't require us to keep credentials for
the same principal for the entire duration of the mount.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When recovering from a delegation recall or a network partition, we need
to replay open(O_RDWR), open(O_RDONLY) and open(O_WRONLY) separately.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A closer reading of RFC3530 reveals that OPEN_DOWNGRADE must always
specify a access modes that have been the argument of a previous OPEN
operation.
IOW: doing OPEN(O_RDWR) and then OPEN_DOWNGRADE(O_WRONLY) is forbidden
unless the user called OPEN(O_WRONLY)
In order to fix that, we really need to track the three possible open
states separately.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
OPEN is a stateful operation, so we must ensure that it always
completes. In order to allow users to interrupt the operation,
we need to make the RPC call asynchronous, and then wait on
completion (or cancel).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Shrink the RPC task structure. Instead of storing separate pointers
for task->tk_exit and task->tk_release, put them in a structure.
Also pass the user data pointer as a parameter instead of passing it via
task->tk_calldata. This enables us to nest callbacks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- Missing initialisation of attribute bitmask in _nfs4_proc_write()
- On success, _nfs4_proc_write() must return number of bytes written.
- Missing post_op_update_inode() in _nfs4_proc_write()
- Missing initialisation of attribute bitmask in _nfs4_proc_commit()
- Missing post_op_update_inode() in _nfs4_proc_commit()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When caching locks due to holding a file delegation, we must always
check against local locks before sending anything to the server.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we have a method of dealing with delegation recalls, actually
enable the caching of posix and BSD locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Delegations allow us to cache posix and BSD locks, however when the
delegation is recalled, we need to "flush the cache" and send
the cached LOCK requests to the server.
This patch sets up the mechanism for doing so.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RFC 3530 states that for OPEN_DOWNGRADE "The share_access and share_deny
bits specified must be exactly equal to the union of the share_access and
share_deny bits specified for some subset of the OPENs in effect for
current openowner on the current file.
Setattr is currently violating the NFSv4 rules for OPEN_DOWNGRADE in that
it may cause a downgrade from OPEN4_SHARE_ACCESS_BOTH to
OPEN4_SHARE_ACCESS_WRITE despite the fact that there exists no open file
with O_WRONLY access mode.
Fix the problem by replacing nfs4_find_state() with a modified version of
nfs_find_open_context().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We must not remove the nfs4_state structure from the inode open lists
before we are in sequence lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Optimise attribute revalidation when hardlinking. Add post-op attributes
for the directory and the original inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"Optional" means that the close call will not fail if the getattr
at the end of the compound fails.
If it does succeed, try to refresh inode attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since the directory attributes change every time we CREATE a file,
we might as well pick up the new directory attributes in the same
compound.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since we almost always call nfs_end_data_update() after we called
nfs_refresh_inode(), we now end up marking the inode metadata
as needing revalidation immediately after having updated it.
This patch rearranges things so that we mark the inode as needing
revalidation _before_ we call nfs_refresh_inode() on those operations
that need it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
resp_len is passed in as buffer size to decode routine; make sure it's
set right in case where userspace provides less than a page's worth of
buffer.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the server is in the unconfirmed OPEN state for a given open owner
and receives a second OPEN for the same open owner, it will cancel the
state of the first request and set up an OPEN_CONFIRM for the second.
This can cause a race that is discussed in rfc3530 on page 181.
The following patch allows the client to recover by retrying the
original open request.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make NFSv4 return the fully initialized file pointer with the
stateid that it created in the lookup w/intent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We no longer need to worry about collisions between close() and the state
recovery code, since the new close will automatically recheck the
file state once it is done waiting on its sequence slot.
Ditto for the nfs4_proc_locku() procedure.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once the state_owner and lock_owner semaphores get removed, it will be
possible for other OPEN requests to reopen the same file if they have
lower sequence ids than our CLOSE call.
This patch ensures that we recheck the file state once
nfs_wait_on_sequence() has completed waiting.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all
labelled with "sequence identifiers" in order to prevent the server from
reordering RPC requests, as this could cause its file state to
become out of sync with the client.
Currently the NFS client code enforces this ordering locally using
semaphores to restrict access to structures until the RPC call is done.
This, of course, only works with synchronous RPC calls, since the
user process must first grab the semaphore.
By dropping semaphores, and instead teaching the RPC engine to hold
the RPC calls until they are ready to be sent, we can extend this
process to work nicely with asynchronous RPC calls too.
This patch adds a new list called "rpc_sequence" that defines the order
of the RPC calls to be sent. We add one such list for each state_owner.
When an RPC call is ready to be sent, it checks if it is top of the
rpc_sequence list. If so, it proceeds. If not, it goes back to sleep,
and loops until it hits top of the list.
Once the RPC call has completed, it can then bump the sequence id counter,
and remove itself from the rpc_sequence list, and then wake up the next
sleeper.
Note that the state_owner sequence ids and lock_owner sequence ids are
all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests
are all ordered w.r.t. each other.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size. Also use helper
functions to convert between human time units and jiffies rather than constant
HZ division to avoid rounding errors.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When the client performs an exclusive create and opens the file for writing,
a Netapp filer will first create the file using the mode 01777. It does this
since an NFSv3/v4 exclusive create cannot immediately set the mode bits.
The 01777 mode then gets put into the inode->i_mode. After the file creation
is successful, we then do a setattr to change the mode to the correct value
(as per the NFS spec).
The problem is that nfs_refresh_inode() no longer updates inode->i_mode, so
the latter retains the 01777 mode. A bit later, the VFS notices this, and calls
remove_suid(). This of course now resets the file mode to inode->i_mode & 0777.
Hey presto, the file mode on the server is now magically changed to 0777. Duh...
Fixes http://bugzilla.linux-nfs.org/show_bug.cgi?id=32
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
