The unification of irq_domain_create_legacy() missed the fact that
interrupts must be associated even when the Linux interrupt number provided
in the first_irq argument is 0.
This breaks all call sites of irq_domain_create_legacy() which supply 0 as
the first_irq argument.
Enforce the association for legacy domains in __irq_domain_instantiate() to
cure this.
[ tglx: Massaged it slightly. ]
Fixes: 70114e7f75 ("irqdomain: Simplify simple and legacy domain creation")
Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/all/c3379142-10bc-4f14-b8ac-a46927aeac38@gmail.com
When the domain suffix is not supplied alloc_fwnode_name() unconditionally
adds a separator.
Fix the format strings to get rid of the stray '-' separator.
Fixes: 1e7c052925 ("irqdomain: Allow giving name suffix for domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812193101.1266625-3-andriy.shevchenko@linux.intel.com
The code uses if (bus_token) and if (bus_token == DOMAIN_BUS_ANY).
Since bus_token is an enum, the latter is more robust against changes.
Convert all !bus_token checks to explicitely check for DOMAIN_BUS_ANY.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812193101.1266625-2-andriy.shevchenko@linux.intel.com
Devices can provide multiple interrupt lines. One reason for this is that
a device has multiple subfunctions, each providing its own interrupt line.
Another reason is that a device can be designed to be used (also) on a
system where some of the interrupts can be routed to another processor.
A line often further acts as a demultiplex for specific interrupts
and has it's respective set of interrupt (status, mask, ack, ...)
registers.
Regmap supports the handling of these registers and demultiplexing
interrupts, but the interrupt domain code ends up assigning the same name
for the per interrupt line domains. This causes a naming collision in the
debugFS code and leads to confusion, as /proc/interrupts shows two separate
interrupts with the same domain name and hardware interrupt number.
Instead of adding a workaround in regmap or driver code, allow giving a
name suffix for the domain name when the domain is created.
Add a name_suffix field in the irq_domain_info structure and make
irq_domain_instantiate() use this suffix if it is given when a domain is
created.
[ tglx: Adopt it to the cleanup patch and fixup the invalid NULL return ]
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/871q2yvk5x.ffs@tglx
irq_domain_set_name() is truly unreadable gunk. Clean it up before adding
more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/all/874j7uvkbm.ffs@tglx
irq_domain_create_simple() and irq_domain_create_legacy() use
__irq_domain_instantiate(), but have extra handling of allocating interrupt
descriptors and associating interrupts in them. Some of that is duplicated.
There are also call sites which have conditonals to invoke different
interrupt domain creator functions, where one of them is usually
irq_domain_create_legacy(). Alternatively they associate the interrupts for
the legacy case after creating the domain.
Moving the extra logic of irq_domain_create_simple()/legacy() into
__irq_domain_instantiate() allows to consolidate that.
Introduce hwirq_base and virq_base members in the irq_domain_info
structure, which allows to transport the required information and add the
conditional interrupt descriptor allocation and interrupt association into
__irq_domain_instantiate().
This reduces irq_domain_create_legacy() and irq_domain_create_simple() to
trivial wrappers which fill in the info structure and allows call sites
which must support the legacy case along with more modern mechanism to
select the domain type via the parameters of the info struct.
[ tglx: Massaged change log ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/32d07bd79eb2b5416e24da9e9e8fe5955423dcf9.1723120028.git.mazziesaccount@gmail.com
This simplifies the handling of platform MSI and wire to MSI controllers
and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices
-----BEGIN PGP SIGNATURE-----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=2adH
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
Modify the comment formatting in irq_find_matching_fwspec function to
enhance code readability and maintain consistency.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614102403.13610-2-shivamurthy.shastri@linutronix.de
Domain creation functions use __irq_domain_add(). With the introduction
of irq_domain_instantiate(), __irq_domain_add() becomes obsolete.
In order to fully remove __irq_domain_add(), convert domain
creation function to irq_domain_instantiate()
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-19-herve.codina@bootlin.com
The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.
Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
- Allocate generic irq chips with irq_alloc_domain_generic_chips()
- Retrieve the generic irq chips with irq_get_domain_generic_chip()
- Initialize retrieved chips: set register base address and offsets,
set several hooks such as irq_mask, irq_unmask, ...
With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.
In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com
The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.
Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com
irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.
In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com
__irq_domain_create() can fail for several reasons. When it fails it
returns a NULL pointer and so filters out the exact failure reason.
The only user of __irq_domain_create() is irq_domain_instantiate() which
can return a PTR_ERR value. On __irq_domain_create() failure, it uses an
arbitrary error code.
Rather than using this arbitrary error value, make __irq_domain_create()
return is own error code and use that one.
[ tglx: Remove the pointless ERR_CAST. domain is a valid return pointer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-11-herve.codina@bootlin.com
irq_domain_instantiate() handles all needs to be used in
irq_domain_create_hierarchy()
Avoid code duplication and use directly irq_domain_instantiate() for
hierarchy domain creation.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-10-herve.codina@bootlin.com
To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.
Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com
In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.
Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com
The existing __irq_domain_create() use a bunch of parameters to create
an irq domain.
With the introduction of irq_domain_info structure, these parameters are
available in the information structure itself.
Using directly this information structure allows future flexibility to
add other parameters in a simple way without the need to change the
__irq_domain_create() prototype.
Convert __irq_domain_create() to use the information structure.
[ tglx: Fixup struct initializer ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-7-herve.codina@bootlin.com
The interrupt domain name computation and setting is directly done in
__irq_domain_create(). This leads to a quite long __irq_domain_create()
function.
In order to simplify __irq_domain_create() and isolate the domain name
computation and setting, move the related operations to a dedicated
function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-6-herve.codina@bootlin.com
The existing irq_domain_add_*() functions used to instantiate an IRQ
domain are wrappers built on top of __irq_domain_add() and describe the
domain properties using a bunch of parameters.
Adding more parameters and wrappers to hide new parameters in the
existing code lead to more and more code without any relevant value and
without any flexibility.
Introduce irq_domain_instantiate() where the interrupt domain properties
are given using a irq_domain_info structure instead of the bunch of
parameters to allow flexibility and easy evolution.
irq_domain_instantiate() performs the same operation as the one done by
__irq_domain_add(). For compatibility reason with existing code, keep
__irq_domain_add() but convert it to irq_domain_instantiate().
[ tglx: Fixed up struct initializer coding style ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-3-herve.codina@bootlin.com
In preparation of the introduction of the irq domain instantiation,
introduce irq_domain_free() to avoid code duplication on later
modifications.
This new function is an extraction of the current operations performed
to free the irq domain. No functional change intended.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-2-herve.codina@bootlin.com
fwnode_handle_get(fwnode) is called when a domain is created with fwnode
passed as a function parameter. fwnode_handle_put(domain->fwnode) is called
when the domain is destroyed but during the creation a path exists that
does not set domain->fwnode.
If this path is taken, the fwnode get will never be put.
To avoid the unbalanced get and put, set domain->fwnode unconditionally.
Fixes: d59f6617ee ("genirq: Allow fwnode to carry name information only")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240614173232.1184015-4-herve.codina@bootlin.com
During compilation, several warning of the following form were raised:
Function parameter or struct member 'x' not described in 'yyy'
Add the missing function parameter descriptions.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240527161450.326615-10-herve.codina@bootlin.com
Improve the readability of irqdomain debugging information in debugfs by
printing the flags field of domain files as human-readable strings instead
of a raw bitmask, which aligned with the existing style used for irqchip
flags in the irq debug files.
Before:
#cat :cpus:cpu@0:interrupt-controller
name: :cpus:cpu@0:interrupt-controller
size: 0
mapped: 2
flags: 0x00000003
After:
#cat :cpus:cpu@0:interrupt-controller
name: :cpus:cpu@0:interrupt-controller
size: 0
mapped: 3
flags: 0x00000003
IRQ_DOMAIN_FLAG_HIERARCHY
IRQ_DOMAIN_NAME_ALLOCATED
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240529091628.3666379-1-ruanjinjie@huawei.com
It's a bit hard to read the logic since the virq is used before checking it
for 0. Rearrange the code to make it better to understand.
This, in particular, should clearly answer the question whether the caller
needs to perform this check or not, and there are plenty of places for both
variants, confirming a confusion.
Fun fact that the new code is shorter:
Function old new delta
irq_dispose_mapping 278 271 -7
Total: Before=11625, After=11618, chg -0.06%
when compiled by GCC on Debian for x86_64.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240405190105.3932034-1-andriy.shevchenko@linux.intel.com
Users of the IRQCHIP_PLATFORM_DRIVER_{BEGIN,END} helpers rely on a fwspec
containing only the fwnode (and crucially a number of parameters set to 0)
together with a DOMAIN_BUS_ANY token to check whether a parent irqchip has
probed and registered a domain.
Since de1ff306dc ("genirq/irqdomain: Remove the param count restriction
from select()"), ops->select() is called unconditionally, meaning that
irqchips implementing select() now need to handle ANY as a match.
Instead of adding more esoteric checks to the individual drivers, add that
condition to irq_find_matching_fwspec(), and let it handle the corner case,
as per the comment in the function.
This restores the functionality of the above helpers.
Fixes: de1ff306dc ("genirq/irqdomain: Remove the param count restriction from select()")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240220114731.1898534-1-maz@kernel.org
Link: https://lore.kernel.org/r/20240219-gic-fix-child-domain-v1-1-09f8fd2d9a8f@linaro.org
Reroute interrupt allocation in irq_create_fwspec_mapping() if the domain
is a MSI device domain. This is required to convert the support for wire
to MSI bridges to per device MSI domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-13-apatel@ventanamicro.com
Now that the GIC-v3 callback can handle invocation with a fwspec parameter
count of 0 lift the restriction in the core code and invoke select()
unconditionally when the domain provides it.
Preparatory change for per device MSI domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-3-apatel@ventanamicro.com
irq_domain_debugfs_init() is defined in irqdomain.c, but the
declaration is in a header that is not included here:
kernel/irq/irqdomain.c:1965:13: error: no previous prototype for 'irq_domain_debugfs_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230516200432.554240-1-arnd@kernel.org
- Prevent possible NULL pointer derefences in irq_data_get_affinity_mask()
and irq_domain_create_hierarchy().
- Take the per device MSI lock before invoking code which relies
on it being hold.
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted to
use core infrastructure and results in a fals positive warning.
- Remove dead code in the MSI subsystem.
- Clarify the documentation for pci_msix_free_irq().
- More kobj_type constification.
-----BEGIN PGP SIGNATURE-----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=jWot
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY/TgzQAKCRCFwuHvBreF
Ya3AAP4/WxTJIbDvtTyH3Fae3NxTdO8j8gsUvU1vrRYG83zdnAEAxd1yii7GEO8D
crkeq9D4FUiPAkFnJ64Exw2FHb060Qg=
=RABK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Some polishing and small fixes for iommufd:
- Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt
subsystem
- Use GFP_KERNEL_ACCOUNT inside the iommu_domains
- Support VFIO_NOIOMMU mode with iommufd
- Various typos
- A list corruption bug if HWPTs are used for attach"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not add the same hwpt to the ioas->hwpt_list twice
iommufd: Make sure to zero vfio_iommu_type1_info before copying to user
vfio: Support VFIO_NOIOMMU with iommufd
iommufd: Add three missing structures in ucmd_buffer
selftests: iommu: Fix test_cmd_destroy_access() call in user_copy
iommu: Remove IOMMU_CAP_INTR_REMAP
irq/s390: Add arch_is_isolated_msi() for s390
iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI
genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI
genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code
iommufd: Convert to msi_device_has_isolated_msi()
vfio/type1: Convert to iommu_group_has_isolated_msi()
iommu: Add iommu_group_has_isolated_msi()
genirq/msi: Add msi_device_has_isolated_msi()
The recent switch to per-domain locking caused a NULL dereference in
irq_domain_create_hierarchy(), as Xen code is calling
msi_create_irq_domain() with a NULL parent pointer.
Fix that by testing parent to be set before dereferencing it. For a
non-existing parent the irqdomain's root will stay to point to
itself.
Fixes: 9dbb8e3452 ("irqdomain: Switch to per-domain locking")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230223083800.31347-1-jgross@suse.com
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
The IRQ domain structures are currently protected by the global
irq_domain_mutex. Switch to using more fine-grained per-domain locking,
which can speed up parallel probing by reducing lock contention.
On a recent arm64 laptop, the total time spent waiting for the locks
during boot drops from 160 to 40 ms on average, while the maximum
aggregate wait time drops from 550 to 90 ms over ten runs for example.
Note that the domain lock of the root domain (innermost domain) must be
used for hierarchical domains. For non-hierarchical domains (as for root
domains), the new root pointer is set to the domain itself so that
&domain->root->mutex always points to the right lock.
Also note that hierarchical domains should be constructed using
irq_domain_create_hierarchy() (or irq_domain_add_hierarchy()) to avoid
having racing allocations access a not fully initialised domain. As a
safeguard, the lockdep assertion in irq_domain_set_mapping() will catch
any offenders that also fail to set the root domain pointer.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-21-johan+linaro@kernel.org
The irq_domain_push_irq() interface is used to add a new (outmost) level
to a hierarchical domain after IRQs have been allocated.
Possibly due to differing mental images of hierarchical domains, the
names used for the irq_data variables make these functions much harder
to understand than what they need to be.
Rename the struct irq_data pointer to the data embedded in the
descriptor as simply 'irq_data' and refer to the data allocated by this
interface as 'parent_irq_data' so that the names reflect how
hierarchical domains are implemented.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-12-johan+linaro@kernel.org
Drop some unnecessary brackets that were left in place when the
corresponding code was updated.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-11-johan+linaro@kernel.org
Since commit d59f6617ee ("genirq: Allow fwnode to carry name
information only") an IRQ domain is always given a name during
allocation (e.g. used for the debugfs entry).
Drop the leftover name assignment when allocating the first IRQ.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-10-johan+linaro@kernel.org
The revmap mutex is essentially only used to maintain the integrity of
the radix tree during updates (lookups use RCU).
As the global irq_domain_mutex is now held in all paths that update the
revmap structures there is strictly no longer any need for the dedicated
mutex, which can be removed.
Drop the revmap mutex and add lockdep assertions to the revmap helpers
to make sure that the global lock is always held when updating the
revmap.
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-9-johan+linaro@kernel.org
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes: afb7da83b9 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Parallel probing of devices that share interrupts (e.g. when a driver
uses asynchronous probing) can currently result in two mappings for the
same hardware interrupt to be created due to missing serialisation.
Make sure to hold the irq_domain_mutex when creating mappings so that
looking for an existing mapping before creating a new one is done
atomically.
Fixes: 765230b5f0 ("driver-core: add asynchronous probing support for drivers")
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Link: https://lore.kernel.org/r/YuJXMHoT4ijUxnRb@hovoldconsulting.com
Cc: stable@vger.kernel.org # 4.8
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-7-johan+linaro@kernel.org
Refactor __irq_domain_alloc_irqs() so that it can be called internally
while holding the irq_domain_mutex.
This will be used to fix a shared-interrupt mapping race, hence the
Fixes tag.
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-6-johan+linaro@kernel.org
Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().
The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.
Replace the bogus disposal with a WARN_ON().
This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.
This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).
Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.
Fixes: 9dc6be3d41 ("genirq/irqdomain: Add map counter")
Cc: stable@vger.kernel.org # 4.13
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes: ddaf144c61 ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Here are a number of small char/misc/whatever driver fixes for 6.2-rc7.
They include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer.)
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY9+Xkw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl92QCfSTATuad8nUXmtBDsveUyAV3G6pkAoJFMWAIj
otmAl9XOGWxdwAURdovs
=tSdo
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/whatever driver fixes. They
include:
- IIO driver fixes for some reported problems
- nvmem driver fixes
- fpga driver fixes
- debugfs memory leak fix in the hv_balloon and irqdomain code
(irqdomain change was acked by the maintainer)
All have been in linux-next with no reported problems"
* tag 'char-misc-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup()
HV: hv_balloon: fix memory leak with using debugfs_lookup()
nvmem: qcom-spmi-sdam: fix module autoloading
nvmem: core: fix return value
nvmem: core: fix cell removal on error
nvmem: core: fix device node refcounting
nvmem: core: fix registration vs use race
nvmem: core: fix cleanup after dev_set_name()
nvmem: core: remove nvmem_config wp_gpio
nvmem: core: initialise nvmem->id early
nvmem: sunxi_sid: Always use 32-bit MMIO reads
nvmem: brcm_nvram: Add check for kzalloc
iio: imu: fxos8700: fix MAGN sensor scale and unit
iio: imu: fxos8700: remove definition FXOS8700_CTRL_ODR_MIN
iio: imu: fxos8700: fix failed initialization ODR mode assignment
iio: imu: fxos8700: fix incorrect ODR mode readback
iio: light: cm32181: Fix PM support on system with 2 I2C resources
iio: hid: fix the retval in gyro_3d_capture_sample
iio: hid: fix the retval in accel_3d_capture_sample
iio: imu: st_lsm6dsx: fix build when CONFIG_IIO_TRIGGERED_BUFFER=m
...
