1
Commit Graph

52221 Commits

Author SHA1 Message Date
David S. Miller
cd9ad58d40 [SCSI] SUNESP: Complete driver rewrite to version 2.0
Major features:

1) Tagged queuing support.
2) Will properly negotiate for synchronous transfers even on
   devices that reject the wide negotiation message, such as
   CDROMs
3) Significantly lower kernel stack usage in interrupt
   handler path by elimination of function vector arrays,
   replaced by a top-level switch statement state machine.
4) Uses generic scsi infrastructure as much as possible to
   avoid code duplication.
5) Automatic request of sense data in response to CHECK_CONDITION
6) Portable to other platforms using ESP such as DEC and Sun3
   systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27 00:26:46 -07:00
David S. Miller
16ce82d846 [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 21:08:21 -07:00
Johannes Berg
f16bfc1c09 [WIRELESS] cfg80211: Clarify locking comment.
This patch clarifies the comment about locking in wiphy_unregister.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:51:12 -07:00
Johannes Berg
a4d73ee168 [WIRELESS] cfg80211: Fix locking in wiphy_new.
This patch fixes the locking in wiphy new. Ingo Oeser
<netdev@axxeo.de> noticed that locking in the error case was wrong and
also suggested this fix.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:50:35 -07:00
Johannes Berg
b86e0280bb [WEXT] net_device: Don't include wext bits if not required.
This patch makes the wext bits in struct net_device depend on
CONFIG_WIRELESS_EXT.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:48:23 -07:00
Johannes Berg
4d44e0dfe9 [WEXT]: Misc code cleanups.
Just a few things that didn't fit in with the other patches.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:47:25 -07:00
Johannes Berg
bdf51894c1 [WEXT]: Reduce inline abuse.
This patch removes a bunch of inline abuse from wext. Most functions
that were marked inline are only used once so the compiler will inline
them anyway, others are used multiple times but there's no requirement
for them to be inline since they aren't in any fast paths.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:46:55 -07:00
Johannes Berg
7a9df167db [WEXT]: Move EXPORT_SYMBOL statements where they belong.
EXPORT_SYMBOL statements are supposed to go together with the symbol
they're exporting. This patch moves them accordingly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:46:23 -07:00
Johannes Berg
dd8ceabcd1 [WEXT]: Cleanup early ioctl call path.
This patch makes the code in wireless_process_ioctl somewhat more
readable.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:45:47 -07:00
Johannes Berg
4b1e255384 [WEXT]: Remove options.
This patch kills the two options in wext that are required to be
enabled anyway because they influence the userspace API.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:45:14 -07:00
Johannes Berg
235c107ba0 [WEXT]: Remove dead debug code.
This patch kills a whole bunch of code that can only ever be used by
defining some things in wext.c. Also, the things that are printed are
mostly useless since the API is fairly well-tested.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:44:35 -07:00
Johannes Berg
295f4a1fa3 [WEXT]: Clean up how wext is called.
This patch cleans up the call paths from the core code into wext.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:43:56 -07:00
Johannes Berg
11433ee450 [WEXT]: Move to net/wireless
This patch moves dev/core/wireless.c to net/wireless/wext.c.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:42:51 -07:00
David S. Miller
39bf094930 [AFS]: Eliminate cmpxchg() usage in vlocation code.
cmpxchg() is not available on every processor so can't
be used in generic code.

Replace with spinlock protection on the ->state changes,
wakeups, and wait loops.

Add what appears to be a missing wakeup on transition
to AFS_VL_VALID state in afs_vlocation_updater().

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:39:14 -07:00
David S. Miller
68c708fd5e [RXRPC]: Fix pointers passed to bitops.
CC [M]  net/rxrpc/ar-input.o
net/rxrpc/ar-input.c: In function ‘rxrpc_fast_process_data’:
net/rxrpc/ar-input.c:171: warning: passing argument 2 of ‘__test_and_set_bit’ from incompatible pointer type
net/rxrpc/ar-input.c:180: warning: passing argument 2 of ‘__clear_bit’ from incompatible pointer type
net/rxrpc/ar-input.c:218: warning: passing argument 2 of ‘__clear_bit’ from incompatible pointer type

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:20:21 -07:00
David S. Miller
411faf5810 [RXRPC]: Remove bogus atomic_* overrides.
These are done with CPP defines which several platforms
use for their atomic.h implementation, which floods the
build with warnings and breaks the build.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 20:18:17 -07:00
David S. Miller
ba3e0e1acc [AFS]: Fix u64 printing in debug logging.
Need 'unsigned long long' casts to quiet warnings on
64-bit platforms when using %ll on a u64.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 16:06:22 -07:00
David Howells
260a980317 [AFS]: Add "directory write" support.
Add support for the create, link, symlink, unlink, mkdir, rmdir and
rename VFS operations to the in-kernel AFS filesystem.

Also:

 (1) Fix dentry and inode revalidation.  d_revalidate should only look at
     state of the dentry.  Revalidation of the contents of an inode pointed to
     by a dentry is now separate.

 (2) Fix afs_lookup() to hash negative dentries as well as positive ones.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:59:35 -07:00
David Howells
c35eccb1f6 [AFS]: Implement the CB.InitCallBackState3 operation.
Implement the CB.InitCallBackState3 operation for the fileserver to
call.  This reduces the amount of network traffic because if this op
is aborted, the fileserver will then attempt an CB.InitCallBackState
operation.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:58:49 -07:00
David Howells
b908fe6b2d [AFS]: Add support for the CB.GetCapabilities operation.
Add support for the CB.GetCapabilities operation with which the fileserver can
ask the client for the following information:

 (1) The list of network interfaces it has available as IPv4 address + netmask
     plus the MTUs.

 (2) The client's UUID.

 (3) The extended capabilities of the client, for which the only current one
     is unified error mapping (abort code interpretation).

To support this, the patch adds the following routines to AFS:

 (1) A function to iterate through all the network interfaces using RTNETLINK
     to extract IPv4 addresses and MTUs.

 (2) A function to iterate through all the network interfaces using RTNETLINK
     to pull out the MAC address of the lowest index interface to use in UUID
     construction.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:58:17 -07:00
David Howells
0795e7c031 [AFS]: Update the AFS fs documentation.
Update the AFS fs documentation.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:57:43 -07:00
David Howells
00d3b7a453 [AFS]: Add security support.
Add security support to the AFS filesystem.  Kerberos IV tickets are added as
RxRPC keys are added to the session keyring with the klog program.  open() and
other VFS operations then find this ticket with request_key() and either use
it immediately (eg: mkdir, unlink) or attach it to a file descriptor (open).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:57:07 -07:00
David Howells
436058a49e [AFS]: Handle multiple mounts of an AFS superblock correctly.
Handle multiple mounts of an AFS superblock correctly, checking to see
whether the superblock is already initialised after calling sget()
rather than just unconditionally stamping all over it.

Also delete the "silent" parameter to afs_fill_super() as it's not
used and can, in any case, be obtained from sb->s_flags.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:56:24 -07:00
David Howells
63b6be55e8 [AF_RXRPC]: Delete the old RxRPC code.
Delete the old RxRPC code as it's now no longer used.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:55:48 -07:00
David Howells
08e0e7c82e [AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.
Make the in-kernel AFS filesystem use AF_RXRPC instead of the old RxRPC code.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:55:03 -07:00
David Howells
651350d10f [AF_RXRPC]: Add an interface to the AF_RXRPC module for the AFS filesystem to use
Add an interface to the AF_RXRPC module so that the AFS filesystem module can
more easily make use of the services available.  AFS still opens a socket but
then uses the action functions in lieu of sendmsg() and registers an intercept
functions to grab messages before they're queued on the socket Rx queue.

This permits AFS (or whatever) to:

 (1) Avoid the overhead of using the recvmsg() call.

 (2) Use different keys directly on individual client calls on one socket
     rather than having to open a whole slew of sockets, one for each key it
     might want to use.

 (3) Avoid calling request_key() at the point of issue of a call or opening of
     a socket.  This is done instead by AFS at the point of open(), unlink() or
     other VFS operation and the key handed through.

 (4) Request the use of something other than GFP_KERNEL to allocate memory.

Furthermore:

 (*) The socket buffer markings used by RxRPC are made available for AFS so
     that it can interpret the cooked RxRPC messages itself.

 (*) rxgen (un)marshalling abort codes are made available.


The following documentation for the kernel interface is added to
Documentation/networking/rxrpc.txt:

=========================
AF_RXRPC KERNEL INTERFACE
=========================

The AF_RXRPC module also provides an interface for use by in-kernel utilities
such as the AFS filesystem.  This permits such a utility to:

 (1) Use different keys directly on individual client calls on one socket
     rather than having to open a whole slew of sockets, one for each key it
     might want to use.

 (2) Avoid having RxRPC call request_key() at the point of issue of a call or
     opening of a socket.  Instead the utility is responsible for requesting a
     key at the appropriate point.  AFS, for instance, would do this during VFS
     operations such as open() or unlink().  The key is then handed through
     when the call is initiated.

 (3) Request the use of something other than GFP_KERNEL to allocate memory.

 (4) Avoid the overhead of using the recvmsg() call.  RxRPC messages can be
     intercepted before they get put into the socket Rx queue and the socket
     buffers manipulated directly.

To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket,
bind an addess as appropriate and listen if it's to be a server socket, but
then it passes this to the kernel interface functions.

The kernel interface functions are as follows:

 (*) Begin a new client call.

	struct rxrpc_call *
	rxrpc_kernel_begin_call(struct socket *sock,
				struct sockaddr_rxrpc *srx,
				struct key *key,
				unsigned long user_call_ID,
				gfp_t gfp);

     This allocates the infrastructure to make a new RxRPC call and assigns
     call and connection numbers.  The call will be made on the UDP port that
     the socket is bound to.  The call will go to the destination address of a
     connected client socket unless an alternative is supplied (srx is
     non-NULL).

     If a key is supplied then this will be used to secure the call instead of
     the key bound to the socket with the RXRPC_SECURITY_KEY sockopt.  Calls
     secured in this way will still share connections if at all possible.

     The user_call_ID is equivalent to that supplied to sendmsg() in the
     control data buffer.  It is entirely feasible to use this to point to a
     kernel data structure.

     If this function is successful, an opaque reference to the RxRPC call is
     returned.  The caller now holds a reference on this and it must be
     properly ended.

 (*) End a client call.

	void rxrpc_kernel_end_call(struct rxrpc_call *call);

     This is used to end a previously begun call.  The user_call_ID is expunged
     from AF_RXRPC's knowledge and will not be seen again in association with
     the specified call.

 (*) Send data through a call.

	int rxrpc_kernel_send_data(struct rxrpc_call *call, struct msghdr *msg,
				   size_t len);

     This is used to supply either the request part of a client call or the
     reply part of a server call.  msg.msg_iovlen and msg.msg_iov specify the
     data buffers to be used.  msg_iov may not be NULL and must point
     exclusively to in-kernel virtual addresses.  msg.msg_flags may be given
     MSG_MORE if there will be subsequent data sends for this call.

     The msg must not specify a destination address, control data or any flags
     other than MSG_MORE.  len is the total amount of data to transmit.

 (*) Abort a call.

	void rxrpc_kernel_abort_call(struct rxrpc_call *call, u32 abort_code);

     This is used to abort a call if it's still in an abortable state.  The
     abort code specified will be placed in the ABORT message sent.

 (*) Intercept received RxRPC messages.

	typedef void (*rxrpc_interceptor_t)(struct sock *sk,
					    unsigned long user_call_ID,
					    struct sk_buff *skb);

	void
	rxrpc_kernel_intercept_rx_messages(struct socket *sock,
					   rxrpc_interceptor_t interceptor);

     This installs an interceptor function on the specified AF_RXRPC socket.
     All messages that would otherwise wind up in the socket's Rx queue are
     then diverted to this function.  Note that care must be taken to process
     the messages in the right order to maintain DATA message sequentiality.

     The interceptor function itself is provided with the address of the socket
     and handling the incoming message, the ID assigned by the kernel utility
     to the call and the socket buffer containing the message.

     The skb->mark field indicates the type of message:

	MARK				MEANING
	===============================	=======================================
	RXRPC_SKB_MARK_DATA		Data message
	RXRPC_SKB_MARK_FINAL_ACK	Final ACK received for an incoming call
	RXRPC_SKB_MARK_BUSY		Client call rejected as server busy
	RXRPC_SKB_MARK_REMOTE_ABORT	Call aborted by peer
	RXRPC_SKB_MARK_NET_ERROR	Network error detected
	RXRPC_SKB_MARK_LOCAL_ERROR	Local error encountered
	RXRPC_SKB_MARK_NEW_CALL		New incoming call awaiting acceptance

     The remote abort message can be probed with rxrpc_kernel_get_abort_code().
     The two error messages can be probed with rxrpc_kernel_get_error_number().
     A new call can be accepted with rxrpc_kernel_accept_call().

     Data messages can have their contents extracted with the usual bunch of
     socket buffer manipulation functions.  A data message can be determined to
     be the last one in a sequence with rxrpc_kernel_is_data_last().  When a
     data message has been used up, rxrpc_kernel_data_delivered() should be
     called on it..

     Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose
     of.  It is possible to get extra refs on all types of message for later
     freeing, but this may pin the state of a call until the message is finally
     freed.

 (*) Accept an incoming call.

	struct rxrpc_call *
	rxrpc_kernel_accept_call(struct socket *sock,
				 unsigned long user_call_ID);

     This is used to accept an incoming call and to assign it a call ID.  This
     function is similar to rxrpc_kernel_begin_call() and calls accepted must
     be ended in the same way.

     If this function is successful, an opaque reference to the RxRPC call is
     returned.  The caller now holds a reference on this and it must be
     properly ended.

 (*) Reject an incoming call.

	int rxrpc_kernel_reject_call(struct socket *sock);

     This is used to reject the first incoming call on the socket's queue with
     a BUSY message.  -ENODATA is returned if there were no incoming calls.
     Other errors may be returned if the call had been aborted (-ECONNABORTED)
     or had timed out (-ETIME).

 (*) Record the delivery of a data message and free it.

	void rxrpc_kernel_data_delivered(struct sk_buff *skb);

     This is used to record a data message as having been delivered and to
     update the ACK state for the call.  The socket buffer will be freed.

 (*) Free a message.

	void rxrpc_kernel_free_skb(struct sk_buff *skb);

     This is used to free a non-DATA socket buffer intercepted from an AF_RXRPC
     socket.

 (*) Determine if a data message is the last one on a call.

	bool rxrpc_kernel_is_data_last(struct sk_buff *skb);

     This is used to determine if a socket buffer holds the last data message
     to be received for a call (true will be returned if it does, false
     if not).

     The data message will be part of the reply on a client call and the
     request on an incoming call.  In the latter case there will be more
     messages, but in the former case there will not.

 (*) Get the abort code from an abort message.

	u32 rxrpc_kernel_get_abort_code(struct sk_buff *skb);

     This is used to extract the abort code from a remote abort message.

 (*) Get the error number from a local or network error message.

	int rxrpc_kernel_get_error_number(struct sk_buff *skb);

     This is used to extract the error number from a message indicating either
     a local error occurred or a network error occurred.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:50:17 -07:00
David Howells
ec26815ad8 [AFS]: Clean up the AFS sources
Clean up the AFS sources.

Also remove references to AFS keys.  RxRPC keys are used instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:49:28 -07:00
David Howells
17926a7932 [AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both
Provide AF_RXRPC sockets that can be used to talk to AFS servers, or serve
answers to AFS clients.  KerberosIV security is fully supported.  The patches
and some example test programs can be found in:

	http://people.redhat.com/~dhowells/rxrpc/

This will eventually replace the old implementation of kernel-only RxRPC
currently resident in net/rxrpc/.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:48:28 -07:00
David Howells
e19dff1fdd [AF_RXRPC]: Make it possible to merely try to cancel timers from a module
Export try_to_del_timer_sync() for use by the AF_RXRPC module.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:46:56 -07:00
David Howells
7318226ea2 [AF_RXRPC]: Key facility changes for AF_RXRPC
Export the keyring key type definition and document its availability.

Add alternative types into the key's type_data union to make it more useful.
Not all users necessarily want to use it as a list_head (AF_RXRPC doesn't, for
example), so make it clear that it can be used in other ways.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:46:23 -07:00
Oleg Nesterov
071b638689 [WORKQUEUE]: cancel_delayed_work: use del_timer() instead of del_timer_sync()
del_timer_sync() buys nothing for cancel_delayed_work(), but it is less
efficient since it locks the timer unconditionally, and may wait for the
completion of the delayed_work_timer_fn().

cancel_delayed_work() == 0 means:

	before this patch:
		work->func may still be running or queued

	after this patch:
		work->func may still be running or queued, or
		delayed_work_timer_fn->__queue_work() in progress.

		The latter doesn't differ from the caller's POV,
		delayed_work_timer_fn() is called with _PENDING
		bit set.

cancel_delayed_work() == 1 with this patch adds a new possibility:

	delayed_work->work was cancelled, but delayed_work_timer_fn
	is still running (this is only possible for the re-arming
	works on single-threaded workqueue).

	In this case the timer was re-started by work->func(), nobody
	else can do this. This in turn means that delayed_work_timer_fn
	has already passed __queue_work() (and wont't touch delayed_work)
	because nobody else can queue delayed_work->work.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 15:45:32 -07:00
Mark Fasheh
8341897882 ocfs2: Cache extent records
The extent map code was ripped out earlier because of an inability to deal
with holes. This patch adds back a simpler caching scheme requiring far less
code.

Our old extent map caching was designed back when meta data block caching in
Ocfs2 didn't work very well, resulting in many disk reads. These days our
metadata caching is much better, resulting in no un-necessary disk reads. As
a result, extent caching doesn't have to be as fancy, nor does it have to
cache as many extents. Keeping the last 3 extents seen should be sufficient
to give us a small performance boost on some streaming workloads.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:10:40 -07:00
Mark Fasheh
7cdfc3a1c3 ocfs2: Remember rw lock level during direct io
Cluster locking might have been redone because a direct write won't
complete, so this needs to be reflected in the iocb.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:07:45 -07:00
Mark Fasheh
8110b073a9 ocfs2: Fix up i_blocks calculation to know about holes
Older file systems which didn't support holes did a dumb calculation of
i_blocks based on i_size. This is no longer accurate, so fix things up to
take actual allocation into account.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:07:40 -07:00
Mark Fasheh
4f902c3772 ocfs2: Fix extent lookup to return true size of holes
Initially, we had wired things to return a size '1' of holes. Cook up a
small amount of code to find the next extent and calculate the number of
clusters between the virtual offset and the next allocated extent.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:45 -07:00
Mark Fasheh
49cb8d2d49 ocfs2: Read from an unwritten extent returns zeros
Return an optional extent flags field from our lookup functions and wire up
callers to treat unwritten regions as holes for the purpose of returning
zeros to the user.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:41 -07:00
Mark Fasheh
e48edee2d8 ocfs2: make room for unwritten extents flag
Due to the size of our group bitmaps, we'll never have a leaf node extent
record with more than 16 bits worth of clusters. Split e_clusters up so that
leaf nodes can get a flags field where we can mark unwritten extents.
Interior nodes whose length references all the child nodes beneath it can't
split their e_clusters field, so we use a union to preserve sizing there.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:37 -07:00
Mark Fasheh
6af67d8205 ocfs2: Use own splice write actor
We need to fill holes during a splice write. Provide our own splice write
actor which can call ocfs2_file_buffered_write() with a splice-specific
callback.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:34 -07:00
Mark Fasheh
fa41045fcb ocfs2: Use do_sync_mapping_range() in ocfs2_zero_tail_for_truncate()
Do this instead of filemap_fdatawrite() - this way we sync only the
range between i_size and the cluster boundary.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:30 -07:00
Mark Fasheh
5b04aa3a64 [PATCH] Turn do_sync_file_range() into do_sync_mapping_range()
do_sync_file_range() accepts a file * from which it takes an address_space to
sync.  Abstract out the bulk of the function into do_sync_mapping_range()
which takes the address_space directly.  This way callers who want to sync an
address_space directly can take advantage of the functionality provided.

do_sync_file_range() is preserved as a small wrapper around
do_sync_mapping_range().

Ocfs2 in particular would like to use this to initiate a sync of a specific
inode range during truncate, where a file * may not be available.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-04-26 15:02:26 -07:00
Mark Fasheh
60b11392f1 ocfs2: zero tail of sparse files on truncate
Since we don't zero on extend anymore, truncate needs to be fixed up to zero
the part of a file between i_size and and end of it's cluster. Otherwise a
subsequent extend could expose bad data.

This introduced a new helper, which can be used in ocfs2_write().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:20 -07:00
Mark Fasheh
25baf2da14 ocfs2: Teach ocfs2_get_block() about holes
ocfs2_get_block() didn't understand sparse files, fix that. Also remove some
code that isn't really useful anymore. We can fix up
ocfs2_direct_IO_get_blocks() at the same time.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:16 -07:00
Mark Fasheh
5069120b72 ocfs2: remove ocfs2_prepare_write() and ocfs2_commit_write()
These are no longer used, and can't handle file systems with sparse file
allocation.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:12 -07:00
Mark Fasheh
9517bac6cc ocfs2: teach ocfs2_file_aio_write() about sparse files
Unfortunately, ocfs2 can no longer make use of generic_file_aio_write_nlock()
because allocating writes will require zeroing of pages adjacent to the I/O
for cluster sizes greater than page size.

Implement a custom file write here, which can order page locks for zeroing.
This also has the advantage that cluster locks can easily be ordered outside
of the page locks.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:08 -07:00
Mark Fasheh
89488984ac ocfs2: Turn off shared writeable mmap for local files systems with holes.
This will be turned back on once we can do allocation in ->page_mkwrite().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:02:01 -07:00
Mark Fasheh
abf8b15694 ocfs2: abstract out allocation locking
Right now, file allocation for ocfs2 is done within ocfs2_extend_file(),
which is either called from ->setattr() (for an i_size change), or at the
top of ocfs2_file_aio_write().

Inodes on file systems with sparse file support will want to do their
allocation during the actual write call.

In either case the cluster locking decisions are the same. We abstract out
that code into a new function, ocfs2_lock_allocators() which will be used by
a later patch to enable writing to sparse files.

This also provides a nice cleanup of ocfs2_extend_allocation().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:01:58 -07:00
Mark Fasheh
3a0782d09c ocfs2: teach extend/truncate about sparse files
For ocfs2_truncate_file(), we eliminate the "simple" truncate case which no
longer exists since i_size is not tied to i_clusters. In
ocfs2_extend_file(), we skip the allocation / page zeroing code for file
systems which understand sparse files.

The core truncate code is changed to do a bottom up tree traversal. This
gets abstracted out into it's own function. To make things more readable,
most of the special case handling for in-inode extents from
ocfs2_do_truncate() is also removed.

Though write support for sparse files comes in a later patch, we at least
update ocfs2_prepare_inode_for_write() to skip allocation for sparse files.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:01:56 -07:00
Mark Fasheh
363041a5f7 ocfs2: temporarily remove extent map caching
The code in extent_map.c is not prepared to deal with a subtree being
rotated between lookups. This can happen when filling holes in sparse files.
Instead of a lengthy patch to update the code (which would likely lose the
benefit of caching subtree roots), we remove most of the algorithms and
implement a simple path based lookup. A less ambitious extent caching scheme
will be added in a later patch.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 15:01:31 -07:00
Mark Fasheh
dcd0538ff4 ocfs2: sparse b-tree support
Introduce tree rotations into the b-tree code. This will allow ocfs2 to
support sparse files. Much of the added code is designed to be generic (in
the ocfs2 sense) so that it can later be re-used to implement large
extended attributes.

This patch only adds the rotation code and does minimal updates to callers
of the extent api.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 14:44:03 -07:00
Mark Fasheh
6f16bf655c ocfs2: small cleanup of ocfs2_request_delete()
There are two checks in there (one for inode newness, one for other mounted
nodes) which are unnecessary, so remove them. The DLM will allow the trylock
in either case without any messaging overhead.

Removing these makes ocfs2_request_delete() a one liner function, so just
move the trylock out one level into ocfs2_query_inode_wipe().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26 14:40:55 -07:00