1
Commit Graph

16378 Commits

Author SHA1 Message Date
David S. Miller
eb2d8d6032 [SPARC64]: Access ivector_table[] using physical addresses.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:15 -07:00
David S. Miller
a650d3839e [SPARC64]: Make IVEC pointers 64-bit.
Currently we chain IVEC entries using 32-bit "pointers"
because we know that the ivector_table is in the main
kernel image, thus below 4GB.

This uses proper 64-bit pointers instead.

Whilst this bloats up the kernel image size, this sets
the infrastructure necessary to significantly shrink the
kernel size by using physical addresses and dynamically
allocating the ivector table.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:15 -07:00
David S. Miller
759f89e03c [SPARC64]: Consolidate MSI support code.
This also makes us use the MSI queues correctly.

Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt
handler.  This handler runs the MSI queue and dispatches the
virtual interrupts indicated by arriving MSIs in that MSI queue.

All of the common logic is placed in pci_msi.c, with callbacks to
handle the PCI controller specific aspects of the operations.

This common infrastructure will make it much easier to add MSG
support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:13 -07:00
Robert Reif
e8dd16129f [SPARC32]: Add irqflags.h to sparc32 and use it from generic code.
Added asm-sparc/irqflags.h and moved irq related code from system.h to it.
Renamed local_irq functions to raw_local_irq in irq.c.
Modified system.h to include linux/irqflags.h which includes asm/irqflags.h.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

This is the first step in adding IRQ-flags state tracing as outlined in
Documentation/irqflags-tracing.txt.  These changes should be harmless
because they just move things around and rename them.

The next step is making the lowlevel entry code modifications which
to be honest are beyond my capabilities at this point.

Boot tested on an ss20 running an SMP kernel.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:11 -07:00
David S. Miller
9bb3c227c4 [SPARC64]: Enable MSI on sun4u Fire PCI-E controllers.
The support code is identical to the hypervisor sun4v stuff,
just replacing the hypervisor calls with register reads and
writes in the Fire controller.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-13 21:53:09 -07:00
David Brownell
6662cbb989 i2c: Rename the PEC functionality bit
Rename I2C_FUNC_SMBUS_HWPEC_CALC as I2C_FUNC_SMBUS_PEC, and list that
functionality as always available through the software implementation.
Update documentation accordingly (and list similar requirements).

The way it's currently packaged doesn't present the capability in a
useful way.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:33 +02:00
David Brownell
08fb68bb4b i2c: Move i2c-dev interfaces to i2c-dev.h
Move the i2c-dev support into <linux/i2c-dev.h> where it should always
have lived.  Now <linux/i2c.h> no longer holds stuff related to the
optional userspace /dev/i2c-X interface.  Improve the descriptions
for these ioctl requests.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:32 +02:00
David Brownell
53be795934 i2c: Remove i2c_algorithm.algo_control()
This removes:

 - An effectively unused hook:  i2c_algorithm.algo_control.

 - The i2c_control() call, used only by i2c-dev to call that
   unused hook or set two barely supported adapter params.

   (That param setting moves into i2c-dev.c ... still iffy
   due to lack of locking, but no other changes.)

As shown by diffstat, this is a net code shrink.  It also reduces the
complexity of the I2C adapter and /dev interfaces.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:32 +02:00
David Brownell
a64ec07d3d i2c: Document struct i2c_msg
Clarify use of the I2C_M_* flags by highlighting the fact that
most of them depend on I2C_FUNC_PROTOCOL_MANGLING.

Also provide kerneldoc for i2c_smbus_read_block_data() and also
for "struct i2c_msg".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:31 +02:00
Vladimir Barinov
95a7f10ead i2c: Add DaVinci I2C controller support
Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:30 +02:00
Adrian Bunk
83eaaed0d0 i2c-core: Make some code static
After the i2c-isa removal some code can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:30 +02:00
David Brownell
3bbb835d4c i2c: New-style devices can support driver model wakeup flags
We need to be able to flag I2C devices, such as RTCs, which can issue wake
events (usually through IRQ lines).  This adds an i2c_board_info.flags bit,
and uses it to initialize the i2c device node.  (And shrinks a few lines
that were overly long.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-13 23:56:29 +02:00
Jean Delvare
cee37ae407 i2c: Kill struct i2c_device_id
I2C devices do not have any form of ID as PCI or USB devices have.
No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't
make sense. So we can get rid of struct i2c_device_id and the
associated support code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
2007-10-13 23:56:29 +02:00
Linus Torvalds
ffb035591f Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] SMP: Fix use of cpumasks.
  [MIPS] Revert "[MIPS] tlbex.c: Cleanup __init usage."
  [MIPS] CFE: Add missing parenthesis.
2007-10-13 10:14:25 -07:00
Linus Torvalds
bcd11eaa22 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits)
  alim15x3: remove redundant m5229_revision check
  sc1200: fix ->dma_base equal zero handling
  cs5520: fix ->dma_base equal zero handling
  sgiioc4: add missing ->dma_base check
  cs5535: add missing ->dma_base check
  ide: remove CONFIG_IDEDMA_IVB config option
  ide: change master/slave IDENTIFY order
  ide: move ide_config_drive_speed() calls to upper layers (take 2)
  pdc202xx_new: check ide_config_drive_speed() return value
  cs5535: check ide_config_drive_speed() return value
  amd74xx/via82cxxx: check ide_config_drive_speed() return value
  au1xxx: fix au1xxx_set_pio_mode()
  icside: use ide_tune_dma()
  ide-pmac: fix PIO setup and enable autotune
  ide-pmac: use ide_tune_dma() (take 2)
  ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  ide-pmac: use __ide_wait_stat()
  ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  ide: add __ide_wait_stat() helper
  ...
2007-10-13 10:13:27 -07:00
Linus Torvalds
c8c55bcb43 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (91 commits)
  [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver
  [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug
  [MTD] [NAND] Fix compiler warning in Alauda driver
  [JFFS2] Remove stray debugging printk
  [JFFS2] Handle dirents on the flash with embedded zero bytes in names.
  [JFFS2] Check for creation of dirents with embedded zero bytes in name.
  [JFFS2] Don't count all 'very dirty' blocks except in debug mode
  [JFFS2] Check whether garbage-collection actually obsoleted its victim.
  [JFFS2] Relax threshold for triggering GC due to dirty blocks.
  [MTD] [OneNAND] Fix typo related with recent commit
  [JFFS2] Trigger garbage collection when very_dirty_list size becomes excessive
  [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first.
  [MTD] [NAND] Resume method for CAFÉ NAND controller
  [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller.
  [MTD] [NAND] s3c2410: fix arch moves
  [MTD] [OneNAND] fix numerous races
  [MTD] map driver for NOR flash on the Intel Vermilion Range chipset
  [JFFS2] Fix unpoint length
  [MTD] fix CFI point method for discontiguous maps
  [MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver
  ...
2007-10-13 10:12:15 -07:00
Linus Torvalds
3749c66c67 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (106 commits)
  KVM: Replace enum by #define
  KVM: Skip pio instruction when it is emulated, not executed
  KVM: x86 emulator: popf
  KVM: x86 emulator: fix src, dst value initialization
  KVM: x86 emulator: jmp abs
  KVM: x86 emulator: lea
  KVM: X86 emulator: jump conditional short
  KVM: x86 emulator: imlpement jump conditional relative
  KVM: x86 emulator: sort opcodes into ascending order
  KVM: Improve emulation failure reporting
  KVM: x86 emulator: pushf
  KVM: x86 emulator: call near
  KVM: x86 emulator: push imm8
  KVM: VMX: Fix exit qualification width on i386
  KVM: Move main vcpu loop into subarch independent code
  KVM: VMX: Move vm entry failure handling to the exit handler
  KVM: MMU: Don't do GFP_NOWAIT allocations
  KVM: Rename kvm_arch_ops to kvm_x86_ops
  KVM: Simplify memory allocation
  KVM: Hoist SVM's get_cs_db_l_bits into core code.
  ...
2007-10-13 10:02:11 -07:00
Al Viro
23ec23c2d3 fix sparc32 breakage (result of vmlinux.lds.S bug)
In commit 4665079cbb ("[NETNS]: Move some
code into __init section when CONFIG_NET_NS=n") we got a new section -
.exit.text.refok (more of 'let's tell modpost that some bogus calls are
not bogus', a-la text.init.refok).

Unfortunately, the commit in question forgot to add it to TEXT_TEXT,
with rather amusing results.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:58:59 -07:00
Al Viro
13bcd5d0e2 v4l: copy_to_user() is not a good method name
Breaks on any target that has copy_to_user() defined as a non-trivial
macro.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:58:59 -07:00
Al Viro
2b8232ce51 minimal build fixes for uml (fallout from x86 merge)
a) include/asm-um/arch can't just point to include/asm-$(SUBARCH) now
 b) arch/{i386,x86_64}/crypto are merged now
 c) subarch-obj needed changes
 d) cpufeature_64.h should pull "cpufeature_32.h", not <asm/cpufeature_32.h>
    since it can be included from asm-um/cpufeature.h
 e) in case of uml-i386 we need CONFIG_X86_32 for make and gcc, but not
    for Kconfig
 f) sysctl.c shouldn't do vdso_enabled for uml-i386 (actually, that one
    should be registered from corresponding arch/*/kernel/*, with ifdef
    going away; that's a separate patch, though).

With that and with Stephen's patch ("[PATCH net-2.6] uml: hard_header fix")
we have uml allmodconfig building both on i386 and amd64.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:57:15 -07:00
Randy Dunlap
c4ea43c552 net core: fix kernel-doc for new function parameters
Fix networking code kernel-doc for newly added parameters.

Warning(linux-2.6.23-git2//net/core/sock.c:879): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:570): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:594): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:617): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:641): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:667): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:722): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:959): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:1195): No description found for parameter 'dev'
Warning(linux-2.6.23-git2//net/core/dev.c:2105): No description found for parameter 'n'
Warning(linux-2.6.23-git2//net/core/dev.c:3272): No description found for parameter 'net'
Warning(linux-2.6.23-git2//net/core/dev.c:3445): No description found for parameter 'net'
Warning(linux-2.6.23-git2//include/linux/netdevice.h:1301): No description found for parameter 'cpu'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:52:26 -07:00
Linus Torvalds
ecaedfa385 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: mach-cayman: Build fixes.
  sh64: Symbol export fixups.
  sh64: linker script tidying and alignment fixups.
  sh64: Set KBUILD_IMAGE to make the rpm target happy.
  sh64: Kill off obsolete linux/blk.h reference.
  sh64: cleanup struct irqaction initializers.
  sh64: Kill off dead gdb stub symbol.
  sh64: alphanumeric display only on Cayman.
  sh64: Add defconfigs for mach-sim and mach-harp.
  sh64: update cayman defconfig.
  sh64: Tidy up Kconfig dependencies.
  sh64: Move consistent DMA routines to arch/sh64/mm/.
  sh64: Some symbol exports and build fixes.
  sh64: mach-sim: Build fixes.
  sh64: mach-harp: Build fixes.
  sh64: Kill off duplicate frame pointer option.
  sh64: Kill off dead ROM-RAM and generic boards.
  sh64: Tidy up includes for Cayman board.
  sh64: Move *_p() I/O routine variants to io.h.
2007-10-13 09:50:26 -07:00
Linus Torvalds
dcf397f037 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits)
  sh: allow building for both r2d boards in same binary.
  sh: fix r2d board detection
  sh: Discard .exit.text/.exit.data at runtime.
  sh: Fix up some section alignments in linker script.
  sh: Fix SH-4 DMAC CHCR masking.
  sh: Rip out left-over nommu cond syscall cruft.
  sh: Make kgdb i-cache flushing less inept.
  sh: kgdb section mismatches and tidying.
  sh: cleanup struct irqaction initializers.
  sh: early_printk tidying.
  video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver.
  sh: Conditionalize gUSA support.
  sh: Follow gUSA preempt changes in __switch_to().
  sh: Tidy up gUSA preempt handling.
  sh: __copy_user() optimizations for small copies.
  sh: clkfwk: Support multi-level clock propagation.
  sh: Fix URAM start address on SH7785.
  sh: Use boot_cpu_data for CPU probe.
  sh: Support extended mode TLB on SH-X3.
  sh: Bump MAX_ACTIVE_REGIONS for SH7785.
  ...
2007-10-13 09:49:04 -07:00
Matthew Wilcox
e92042e5c0 m68k: Export cachectl.h
libffi in GCC 4.2 needs cachectl.h to do its cache flushing.  But we
don't currently export it.  I believe this patch should do the trick.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:41:03 -07:00
Geert Uytterhoeven
a55444494d m68k: ignore restart_syscall
m68k: ignore restart_syscall, which is not needed on m68k.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:41:03 -07:00
Bartlomiej Zolnierkiewicz
88b2b32bab ide: move ide_config_drive_speed() calls to upper layers (take 2)
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.

* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program 
  the host for the transfer mode after programming the device.  Set it
  in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
  and via82cxxx host drivers.

* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
  skip programming of host/device for the transfer mode ("smart" hosts).
  Set it in it821x host driver and check it in ide_tune_dma().

* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
  direct ->set_pio_mode/->speedproc users to use these helpers.

* Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
  methods to callers.

* Rename ->speedproc method to ->set_dma_mode, make it void and update
  all implementations accordingly.

* Update ide_set_xfer_rate() comments.

* Unexport ide_config_drive_speed().

v2:
* Fix issues noticed by Sergei:
  - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
    to setting DMA modes from sc1200_set_pio_mode() to do_special()
  - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
  - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
  - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
  - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
  - don't set ->set_{pio,dma}_mode on it821x in "smart" mode
  - fix build problem in pmac.c
  - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
  - improve patch description

Changes in behavior caused by this patch:
- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
  PIO mode if it821x controller is in "smart" mode
- removal of two debugging printk-s (from cs5530.c and sc1200.c)
- transfer modes 0x00-0x07 passed from user space may be programmed twice on
  the device (not really an issue since 0x00 is not supported correctly by
  any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:51 +02:00
Bartlomiej Zolnierkiewicz
75d7d963e3 icside: use ide_tune_dma()
* Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode()
  (in the long-term it should be either removed or generalized for all hosts).

* Use ide_tune_dma() in icside.c::icside_dma_check().

  This results in the following changes in behavior:
  - pre-EIDE SWDMA modes are now also respected
  - drive->autodma is checked instead of hwif->autodma
    (doesn't really matter as icside sets both to "1")

* Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:50 +02:00
Bartlomiej Zolnierkiewicz
aedea5910c ide-pmac: remove pmac_ide_do_setfeature() (take 2)
Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove
the latter, also  ide-iops.c::__ide_wait_stat() could be static again.

Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's
->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than
the only changes in behavior are:

* if PIO mode is set then ->dma_off_queitly is called to disable DMA

* if setting transfer mode fails ide_dump_status() is called to dump status

v2:
* IDE PMAC controllers allow separate PIO and DMA timings and PPC userland
  depends on this fact, and calls "hdparm -p" without calling "hdparm -d".

  Therefore to compensate for DMA being disabled by ide_config_drive_speed()
  for PIO modes:

  - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver

  - add handling of the new flag to ide-io.c::do_special()

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:50 +02:00
Bartlomiej Zolnierkiewicz
ddf151026a ide-pmac: use __ide_wait_stat()
* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature().

While at it do following changes to match __ide_wait_stat() call in
ide_config_drive_speed():

* Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT.

* Check DRQ_STAT bit (shouldn't be set for good device status).

Also remove no longer needed wait_for_ready() from ide-iops.c.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:49 +02:00
Bartlomiej Zolnierkiewicz
74af21cf4d ide: add __ide_wait_stat() helper
* Split off checking of the status register from ide_wait_stat() to
  __ide_wait_stat() helper.

* Use the new helper in ide_config_drive_speed().  The only change in the
  functionality is that the function now fails if after 20 sec (WAIT_CMD)
  device is still busy (BUSY_STAT bit is set) while previously instead of
  failing the function continued with checking for the correct device status
  (which would give the device additional 10 usec to clear BUSY_STAT bit).

* Remove stale comment for ide_config_drive_speed().

* Remove duplicate comment for ide_wait_stat() from <linux/ide.h>.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:49 +02:00
David Woodhouse
ebf8889bd1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2007-10-13 14:58:23 +01:00
David Woodhouse
b160292cc2 Merge Linux 2.6.23 2007-10-13 14:43:54 +01:00
Bryan Wu
b37bde1478 [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver
This is the driver for latest Blackfin on-chip nand flash controller

 - use nand_chip and mtd_info common nand driver interface
 - provide both PIO and dma operation
 - compiled with ezkit bf548 configuration
 - use hardware 1-bit ECC
 - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs

ChangeLog from try#1
 - use hweight32() instead of count_bits()
 - replace bf54x with bf5xx and BF54X with BF5XX
 - compare against plat->page_size in 2 cases when enable hardware ECC

ChangeLog from try#2
 - passed nand_test suites
 - use cpu_relax() instead of busy wait loop
 - some coding style issue pointed out by Andrew

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:36:49 +01:00
Kevin Hao
c4a9f88daf [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug
When we press ctrl-alt-del,kernel_restart_prepare will invoke 
cfi_intelext_reboot which will set flash to read array mode, but later 
when device_shutdown is invoked which may put current work queue to 
sleep and other process may be scheduled to running and programming 
flash in not FL_READY mode again. So we can't boot up if this flash is 
used for bootloader.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:36:18 +01:00
Avi Kivity
8a45450d0a KVM: Replace enum by #define
Easier for existence test (#ifdef) in userspace.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:29 +02:00
Eddie Dong
96ad2cc613 KVM: in-kernel LAPIC save and restore support
This patch adds a new vcpu-based IOCTL to save and restore the local
apic registers for a single vcpu. The kernel only copies the apic page as
a whole, extraction of registers is left to userspace side. On restore, the
APIC timer is restarted from the initial count, this introduces a little
delay, but works fine.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:25 +02:00
He, Qing
6bf9e962d1 KVM: in-kernel IOAPIC save and restore support
This patch adds support for in-kernel ioapic save and restore (to
and from userspace). It uses the same get/set_irqchip ioctl as
in-kernel PIC.

Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:25 +02:00
He, Qing
6ceb9d791e KVM: Add get/set irqchip ioctls for in-kernel PIC live migration support
This patch adds two new ioctls to dump and write kernel irqchips for
save/restore and live migration. PIC s/r and l/m is implemented in this
patch.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:25 +02:00
Eddie Dong
b6958ce44a KVM: Emulate hlt in the kernel
By sleeping in the kernel when hlt is executed, we simplify the in-kernel
guest interrupt path considerably.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:25 +02:00
Eddie Dong
97222cc831 KVM: Emulate local APIC in kernel
Because lightweight exits (exits which don't involve userspace) are many
times faster than heavyweight exits, it makes sense to emulate high usage
devices in the kernel.  The local APIC is one such device, especially for
Windows and for SMP, so we add an APIC model to kvm.

It also allows in-kernel host-side drivers to inject interrupts without
going through userspace.

[compile fix on i386 from Jindrich Makovicka]

Signed-off-by: Yaozu (Eddie) Dong <Eddie.Dong@intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:25 +02:00
Eddie Dong
85f455f7dd KVM: Add support for in-kernel PIC emulation
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:24 +02:00
Yang, Sheng
253abdee5e KVM: Communicate cr8 changes to userspace
This allows running 64-bit Windows.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:23 +02:00
Jeff Dike
519ef35341 KVM: add hypercall nr to kvm_run
Add the hypercall number to kvm_run and initialize it.  This changes the ABI,
but as this particular ABI was unusable before this no users are affected.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:20 +02:00
Rusty Russell
7075bc816c KVM: Use standard CR8 flags, and fix TPR definition
Intel manual (and KVM definition) say the TPR is 4 bits wide.  Also fix
CR8_RESEVED_BITS typo.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:19 +02:00
Rusty Russell
9eb829ced8 KVM: Trivial: Use standard BITMAP macros, open-code userspace-exposed header
Creating one's own BITMAP macro seems suboptimal: if we use manual
arithmetic in the one place exposed to userspace, we can use standard
macros elsewhere.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:18 +02:00
Rusty Russell
dea8caee7b KVM: Trivial: /dev/kvm interface is no longer experimental.
KVM interface is no longer experimental.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:17 +02:00
Avi Kivity
24cbc7e9cb KVM: Future-proof the exit information union ABI
Note that as the size of struct kvm_run is not part of the ABI, we can add
things at the end.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:17 +02:00
Avi Kivity
81fe96bde7 i386: Expose IOAPIC register definitions even if CONFIG_X86_IO_APIC is not set
KVM reuses the IOAPIC register definitions, and needs them even if the
host is not compiled with IOAPIC support.  Move the #ifdef below so that only
the IOAPIC variables and functions are protected, and the register definitions
are available to all.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13 10:18:17 +02:00
Nick Piggin
b6c7347fff x86: optimise barriers
According to latest memory ordering specification documents from Intel
and AMD, both manufacturers are committed to in-order loads from
cacheable memory for the x86 architecture.  Hence, smp_rmb() may be a
simple barrier.

Also according to those documents, and according to existing practice in
Linux (eg.  spin_unlock doesn't enforce ordering), stores to cacheable
memory are visible in program order too.  Special string stores are safe
-- their constituent stores may be out of order, but they must complete
in order WRT surrounding stores.  Nontemporal stores to WB memory can go
out of order, and so they should be fenced explicitly to make them
appear in-order WRT other stores.  Hence, smp_wmb() may be a simple
barrier.

    http://developer.intel.com/products/processor/manuals/318147.pdf
    http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24593.pdf

In userspace microbenchmarks on a core2 system, fence instructions range
anywhere from around 15 cycles to 50, which may not be totally
insignificant in performance critical paths (code size will go down
too).

However the primary motivation for this is to have the canonical barrier
implementation for x86 architecture.

smp_rmb on buggy pentium pros remains a locked op, which is apparently
required.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 18:41:21 -07:00
Nick Piggin
4071c71855 x86: fix IO write barrier
wmb() on x86 must always include a barrier, because stores can go out of
order in many cases when dealing with devices (eg. WC memory).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 18:41:21 -07:00