1
Commit Graph

65065 Commits

Author SHA1 Message Date
Jeremy Kerr
ef8034d01a [POWERPC] cell/PS3: Always set master run control bit in mfc_sr1_set
At present, running any SPE program on the ps3 will trigger a BUG_ON
when spufs_run_spu tries to clear the master run control bit, as lv1
does not make the master run control available to Linux.

This change makes SPE apps work again by disabling changes to the
master run control on PS3.  Although we don't have the facility to
disable a SPE with supervisor-level privileges, it's better than
hitting the BUG_ON unconditionally.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Masato Noguchi
b7f90a406f [POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 interrupt.
The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt
is edge-triggered.  The current spu interrupt handler assumes this
behavior and does not clear the interrupt status.

The PS3 hypervisor visualizes all SPU interrupts as level, and on return
from the interrupt handler the hypervisor will deliver a new virtual
interrupt for any unmasked interrupts which for which the status has not
been cleared.  This fix clears the interrupt status in the interrupt
handler.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Herbert Xu
32528d0fbd [CRYPTO] blkcipher: Fix inverted test in blkcipher_get_spot
The previous patch had the conditional inverted.  This patch fixes it
so that we return the original position if it does not straddle a page.

Thanks to Bob Gilligan for spotting this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-10 15:51:11 +08:00
David Brownell
939bc4943d i2c-algo-bit: Read block data bugfix
This fixes a bug in the way i2c-algo-bit handles I2C_M_RECV_LEN,
used to implement i2c_smbus_read_block_data().  Previously, in the
absence of PEC (rarely used!) it would NAK the "length" byte:

	S addr Rd [A] [length] NA

That prevents the subsequent data bytes from being read:

	S addr Rd [A] [length] { A [data] }* NA

The primary fix just reorders two code blocks, so the length used
in the "should I NAK now?" check incorporates the data which it
just read from the slave device.

However, that move also highlighted other fault handling glitches.
This fixes those by abstracting the RX path ack/nak logic, so it
can be used in more than one location.  Also, a few CodingStyle
issues were also resolved.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-09-09 22:29:14 +02:00
Jean Delvare
51e5709ad4 i2c-pxa: Fix adapter number
It turns out that platform_device.id is a "u32" so testing it for being
nonnegative is useless when setting up an i2c adapte.  Instead,
do what the platform_bus code does and test it against the value "-1".

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-09-09 22:29:13 +02:00
David Brownell
9a3180e70e i2c-gpio: Fix adapter number
It turns out that platform_device.id is a "u32" so testing it for being
nonnegative is useless when setting up an i2c bitbang device.  Instead,
do what the platform_bus code does and test it against the value "-1". 

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-09-09 22:29:13 +02:00
Jean Delvare
15bde2f1a8 hwmon: End of I/O region off-by-one
Fix an off-by-one error in the I/O region declaration of two
hardware monitoring drivers (lm78 and w83781d.) We were requesting
one extra port at the end of the region.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-09-09 10:38:37 -04:00
Herbert Xu
e4630f9fd8 [CRYPTO] blkcipher: Fix handling of kmalloc page straddling
The function blkcipher_get_spot tries to return a buffer of
the specified length that does not straddle a page.  It has
an off-by-one bug so it may advance a page unnecessarily.

What's worse, one of its callers doesn't provide a buffer
that's sufficiently long for this operation.

This patch fixes both problems.  Thanks to Bob Gilligan for
diagnosing this problem and providing a fix.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-09-09 08:45:21 +01:00
Marcel Holtmann
89f2783ded [Bluetooth] Fix parameter list for event filter command
On device initialization the event filters are cleared. In case of
clearing the filters the extra condition type shall be omitted.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:49 +02:00
Marcel Holtmann
7c631a6760 [Bluetooth] Update security filter for Bluetooth 2.1
This patch updates the HCI security filter with support for the
Bluetooth 2.1 commands and events.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:43 +02:00
Marcel Holtmann
767c5eb5d3 [Bluetooth] Add compat handling for timestamp structure
The timestamp structure needs special handling in case of compat
programs. Use the same wrapping method the network core uses.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:34 +02:00
Marcel Holtmann
26a4a06e7f [Bluetooth] Add missing stat.byte_rx counter modification
With the support for hci_recv_fragment() the call to increase the
stat.byte_rx counter got accidentally removed. This patch fixes it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:27 +02:00
Stefan Richter
5511142870 firewire: fw-ohci: ignore failure of pci_set_power_state (fix suspend regression)
Fixes (papers over) "Sleep problems with kernels >= 2.6.21 on powerpc",
http://lkml.org/lkml/2007/8/25/155.  The issue is that the FireWire
controller's pci_dev.current_state of iBook G3 and presumably older
PowerBooks is still in PCI_UNKNOWN instead of PCI_D0 when the firewire
driver's .suspend method is called.

Like it was suggested earlier in http://lkml.org/lkml/2006/10/24/13, we
do not fail .suspend anymore if pci_set_power_state failed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-07 18:44:35 +02:00
Josh Boyer
5326152fa1 [POWERPC] Walnut zImage wrapper
Add zImage wrapper for walnut board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:51:44 -05:00
Josh Boyer
545c069ccd [POWERPC] Walnut board support
Board support for the PPC405 Walnut evaluation board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:51:24 -05:00
Josh Boyer
7f2814d229 [POWERPC] Walnut defconfig
Walnut board defconfig

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:51:08 -05:00
Josh Boyer
8852ab7afc [POWERPC] Walnut DTS
Device tree source file for the PPC405 Walnut evaluation board.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:50:50 -05:00
Josh Boyer
1f6e579521 [POWERPC] Fix bus probe on Bamboo board
Commit 804ace8881 changed the behavior of how compatible nodes are found.
This highlighted a bug on the Bamboo board where it wasn't probing the bus
specified in the DTS file.  We fix it by being explicit about which bus to
probe.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbvear.id.au>
2007-09-07 07:50:26 -05:00
Josh Boyer
c9c6b744d8 [POWERPC] Remove dtc build cruft from DTS files
The patch below removes the dtc incantation instructions from the
in-kernel DTS files.  It's not needed, and is prone to being
out-of-date most of the time.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-09-07 07:49:59 -05:00
Valentine Barshak
606d08bcd6 [POWERPC] PowerPC 440EPx: Sequoia bootwrapper
Bootwrapper code for AMCC PPC440EPx Sequoia.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:49:28 -05:00
Valentine Barshak
15fc993e31 [POWERPC] PowerPC 440EPx: Sequoia board support
AMCC PPC440EPx Sequoia board support.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:49:13 -05:00
Valentine Barshak
38a5d6c9e7 [POWERPC] PowerPC 440EPx: Sequoia defconfig
AMCC PPC440EPx Sequoia default config.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:48:49 -05:00
Valentine Barshak
d60ff95365 [POWERPC] PowerPC 440EPx: Sequoia device tree
AMCC PPC440EPx Sequoia device tree.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-09-07 07:48:17 -05:00
Vladimir Shebordaev
7b6dff982b Input: usbtouchscreen - correctly set 'phys'
This patch fixes a nasty typo in usbtouchscreen driver. The typo
is inherited from the original mtouchusb. It used to make the input
subsytem to incorrectly report the physical device ids to userspace
that in turn is very confusing for, e.g. XInput hotplug facilities
in setups with multiple identical touchscreens.

Signed-off-by: Vladimir Shebordaev <vshebordaev@mail.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-06 21:32:16 -04:00
Hirokazu Takata
7071b2914a m32r: Rename STI/CLI macros
The names of STI and CLI macros were derived from i386 arch historically,
but their name are incomprehensible.
So, for easy to understand, rename these macros to ENABLE_INTERRUPTS
and DISABLE_INTERRUPTS, respectively.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-06 11:10:56 +09:00
Hirokazu Takata
33205613cd m32r: build fix of entry.S
This patch fixes the following compile error:
<--  snip  -->
 ...
  AS      arch/m32r/kernel/entry.o
/home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S: Assembler messages:
/home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S:358: Error: bad instruction `addi r0,#(((((0)+(64))+(32))+(32)))'
make[2]: *** [arch/m32r/kernel/entry.o] Error 1
<--  snip  -->

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: Adrian Bunk <bunk@kernel.org>
2007-09-06 11:09:20 +09:00
Peter Zijlstra
1169783085 sched: fix ideal_runtime calculations for reniced tasks
fix ideal_runtime:

  - do not scale it using niced_granularity()
    it is against sum_exec_delta, so its wall-time, not fair-time.

  - move the whole check into __check_preempt_curr_fair()
    so that wakeup preemption can also benefit from the new logic.

this also results in code size reduction:

   text    data     bss     dec     hex filename
  13391     228    1204   14823    39e7 sched.o.before
  13369     228    1204   14801    39d1 sched.o.after

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Peter Zijlstra
4a55b45036 sched: improve prev_sum_exec_runtime setting
Second preparatory patch for fix-ideal runtime:

Mark prev_sum_exec_runtime at the beginning of our run, the same spot
that adds our wait period to wait_runtime. This seems a more natural
location to do this, and it also reduces the code a bit:

   text    data     bss     dec     hex filename
  13397     228    1204   14829    39ed sched.o.before
  13391     228    1204   14823    39e7 sched.o.after

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Peter Zijlstra
7c92e54f6f sched: simplify __check_preempt_curr_fair()
Preparatory patch for fix-ideal-runtime:

simplify __check_preempt_curr_fair(): get rid of the integer return.

   text    data     bss     dec     hex filename
  13404     228    1204   14836    39f4 sched.o.before
  13393     228    1204   14825    39e9 sched.o.after

functionality is unchanged.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Ingo Molnar
cf2ab4696e sched: fix xtensa build warning
rename RSR to SRR - 'RSR' is already defined on xtensa.

found by Adrian Bunk.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Ingo Molnar
2491b2b89d sched: debug: fix sum_exec_runtime clearing
when cleaning sched-stats also clear prev_sum_exec_runtime.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Ingo Molnar
a206c07213 sched: debug: fix cfs_rq->wait_runtime accounting
the cfs_rq->wait_runtime debug/statistics counter was not maintained
properly - fix this.

this also removes some code:

   text    data     bss     dec     hex filename
  13420     228    1204   14852    3a04 sched.o.before
  13404     228    1204   14836    39f4 sched.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-09-05 14:32:49 +02:00
Ingo Molnar
a0dc72601d sched: fix niced_granularity() shift
fix niced_granularity(). This resulted in under-scheduling for
CPU-bound negative nice level tasks (and this in turn caused
higher than necessary latencies in nice-0 tasks).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:49 +02:00
Suresh Siddha
7fd0d2dde9 sched: fix MC/HT scheduler optimization, without breaking the FUZZ logic.
First fix the check
	if (*imbalance + SCHED_LOAD_SCALE_FUZZ < busiest_load_per_task)
with this
	if (*imbalance < busiest_load_per_task)

As the current check is always false for nice 0 tasks (as
SCHED_LOAD_SCALE_FUZZ is same as busiest_load_per_task for nice 0
tasks).

With the above change, imbalance was getting reset to 0 in the corner
case condition, making the FUZZ logic fail. Fix it by not corrupting the
imbalance and change the imbalance, only when it finds that the HT/MC
optimization is needed.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-09-05 14:32:48 +02:00
Eric Sandeen
5995cb7d80 [XFS] fix nasty quota hashtable allocation bug
This git mod: 77e4635ae1
converted to a "greedy" allocation interface, but for the quota hashtables
it switched from allocating XFS_QM_HASHSIZE (nr of elements)
xfs_dqhash_t's to allocating only XFS_QM_HASHSIZE *bytes* - quite a lot
smaller! Then when we converted hsize "back" to nr of elements (the
division line) hsize went to 0. This was leading to oopses when running
any quota tests on the Fedora 8 test kernel, but the problem has been
there for almost a year.

SGI-PV: 968837
SGI-Modid: xfs-linux-melb:xfs-kern:29354a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:51:04 +10:00
Christoph Hellwig
265c1fac38 [XFS] fix sparse shadowed variable warnings
- in xfs_probe_cluster rename the inner len to pg_len. There's no harm
  here because the outer len isn't used after the inner len comes into
  existence but it keeps the code clean.
- in xfs_da_do_buf remove the inner i because they don't overlap
  and they are both the same type.

SGI-PV: 968555
SGI-Modid: xfs-linux-melb:xfs-kern:29311a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:50:26 +10:00
Christoph Hellwig
ee5c80239d [XFS] fix ASSERT and ASSERT_ALWAYS
- remove the != 0 inside the unlikely in ASSERT_ALWAYS because sparse now
  complains about comparisons between pointers and 0
- add a standalone ASSERT implementation because defining it to
  ASSERT_ALWAYS means the string is expanded before the token passing
  stringification. This way we get the actual content of the
  assertion in the assfail message and don't overflow sparse's
  stringification buffer leading to sparse error messages.

SGI-PV: 968555
SGI-Modid: xfs-linux-melb:xfs-kern:29310a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:49:30 +10:00
Christoph Hellwig
34521c5e49 [XFS] Fix sparse warning in kmem_shake_allow
We can't return a masked result of a __bitwise type. Compare it to 0 first
to keep the behaviour without the warning.

SGI-PV: 968555
SGI-Modid: xfs-linux-melb:xfs-kern:29309a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:48:00 +10:00
Christoph Hellwig
4b80916b29 [XFS] Fix sparse NULL vs 0 warnings
Sparse now warns about comparing pointers to 0, so change all instance
where that happens to NULL instead.

SGI-PV: 968555
SGI-Modid: xfs-linux-melb:xfs-kern:29308a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:47:33 +10:00
David Chinner
8da22d7a36 [XFS] Set filestreams object timeout to something sane.
SGI-PV: 968554
SGI-Modid: xfs-linux-melb:xfs-kern:29303a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-09-05 14:47:10 +10:00
Elvis Pranskevichus
749aea73aa Input: i8042 - add HP Pavilion DV4270ca to the MUX blacklist
This fixes "atkbd.c: Suprious NAK on isa0060/serio0" errors for
HP Pavilion DV4270ca.

Signed-off-by: Elvis Pranskevichus <el@prans.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-04 23:18:21 -04:00
Ralf Baechle
7a1904c32c Input: i8042 - fix modpost warning
i8042_unregister_ports's only caller i8042_remove is a __devexit function
so make it __devexit too.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-04 23:16:31 -04:00
Samuel Thibault
9e3d3d07de Input: add more Braille keycodes
Some braille keyboards have 10 dots, so extend the Input braille keys
definitions.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-04 23:16:04 -04:00
Christian Ehrhardt
ce29a1f8bd [x86 setup] Work around bug in Xen HVM
Apparently XEN does not keep the contents of the 48-bit gdt_48 data
structure that is passed to lgdt in the XEN machine state. Instead it
appears to save the _address_ of the 48-bit descriptor
somewhere. Unfortunately this data happens to reside on the stack and
is probably no longer availiable at the time of the actual protected
mode jump.

This is Xen bug but given that there is a one-line patch to work
around this problem, the linux kernel should probably do this.  My fix
is to make the gdt_48 description in setup_gdt static (in setup_idt
this is already the case). This allows the kernel to boot under
Xen HVM again.

Signed-off-by: Christian Ehrhardt <lk@c--e.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-09-05 02:37:57 +01:00
Linus Torvalds
b21010ed64 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2007-09-04 01:04:43 -07:00
Linus Torvalds
b1330031b7 Merge branch 'for_linus' of git://git.linux-nfs.org/pub/linux/nfs-2.6 2007-09-04 00:45:54 -07:00
Linus Torvalds
ea3c4b126a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 2007-09-04 00:43:57 -07:00
Linus Torvalds
a5229e6b3f Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fix 2007-09-04 00:42:41 -07:00
Linus Torvalds
bc5a6deba7 Merge git://git.infradead.org/~dwmw2/mtd-2.6.23 2007-09-04 00:39:50 -07:00
Hirokazu Takata
9990b48a40 m32r: Separate syscall table from entry.S
- Separate sys_call_table from arch/m32r/kernel/entry.S and
  move it to arch/m32r/kernel/system_call.S.
- Change sys_call_table section from .data to .rodata.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03 11:30:19 +09:00