Au12x0 MMC platform device strangely claims 0x41 bytes for its
memory-mapped registers. Make it claim the whole 0x80000 instead according
to the memory map given in the datasheets.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix 64-bit Malta by using CKSEG0ADDR and correct casts.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
LASAT's sysctl interface was broken, it failed a check during boot because
a single entry had a sysctl number and the rest were unnumbered. When I
fixed it I noticed that the whole sysctl file needed a spring clean, it was
using mutexes where it wasn't needed (it's only needed to protect during
writes to the EEPROM), so I moved that stuff out and generally cleaned the
whole thing up.
So now, LASAT's sysctl/proc interface is working again.
Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't
need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020.
Turns out it needed the same change after all.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
After the common MIPS CPU interrupt controller (for irq0-7) was introduced
the Lasat boards didn't get their interrupts right, so nothing worked. The
old routines need to be offset by the new 8 hardware interrupts common to
all MIPS CPU's.
Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The SWARM defconfig file has not been regenerated for over a year now.
Here is a patch to bring the file up to date. Additionally some important
and sometimes confusing changes happened meanwhile. Here is the list of
notable corresponding updates to the configuration:
1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The
latter requires a non-standard -msb1-pass1-workarounds option to be
supported by GCC and I am told is quite rare anyway.
[Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's
special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern
kernel anyway.]
2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as
required by SB1250_MAC.
3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard.
4. TMPFS is enabled, because I use it. ;-)
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Build the SWARM platform library is as an object rather than an archive
so that files which only contain symbols used by initcalls and do not
provide any symbols that would pull them from an archive still work.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
RM200 with R5ks have a little bit different arcname.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use better load address for big endian kernels to avoid clashes with
PROM / SASH.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Correctly initialize io_map_base for the SB1250 PCI controller as required
for proper iomap support. Based on a proposal from Daniel Jacobowitz.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This enables CONFIG_ATA_SFF in the defconfigs that are intended to
work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since
the support for the SATA cell in the K2 chipset is provided by the
sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn
that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s.
Signed-off-by: Paul Mackerras <paulus@samba.org>
There are no in-tree uses of the export any more and in linux-next there
is a change that exports it globally which causes warnings:
WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux
and in one case (mpc85xx_defconfig) a build error:
kernel/built-in.o: In function `__crc_console_drivers':
(*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers'
So remove the export now. Also, there is no longer any need to include
linux/console.h.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
GCC 4.4.x looks to be adding support for generating out-of-line register
saves/restores based on:
http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix
this we add the use the save/restore code from gcc and simplified it down
for our needs (integer only).
Additionally, we have to link this code into each module. The other
solution was to add EXPORT_SYMBOL() which meant going through the
trampoline which seemed nonsensical for these out-of-line routines.
Finally, we add some checks to prom_init_check.sh to ignore the
out-of-line save/restore functions.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
GCC 4.4.x looks to be adding support for generating out-of-line register
saves/restores based on:
http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
This breaks the bootwrapper as we'd need to link with libgcc to get the
implementation of the register save/restores.
To workaround this issue, we just stole the save/restore code from gcc
and simplified it down for our needs (integer only).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Fix this:
/usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c: In function 'print_device_node_tree':
/usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c:55: warning: ISO C90 forbids mixed declarations and code
also make that function look like it's part of Linux.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
of_node_put is needed before discarding a value received from
of_find_node_by_type, eg in error handling code.
The semantic patch that makes the change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
struct device_node *n;
struct device_node *n1;
struct device_node *n2;
statement S;
identifier f1,f2;
expression E1,E2;
constant C;
@@
n = of_find_node_by_type(...)
...
if (!n) S
... when != of_node_put(n)
when != n1 = f1(n,...)
when != E1 = n
when any
when strict
(
+ of_node_put(n);
return -C;
|
of_node_put(n);
|
n2 = f2(n,...)
|
E2 = n
|
return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
debugfs_create_file() returns a non-NULL (non-zero) value in case of
success, not a NULL value.
This fixes this non-critical boot-time debugging error message:
[ 1.316386] calling irq_debugfs_init+0x0/0x50
[ 1.316399] initcall irq_debugfs_init+0x0/0x50 returned -12 after 0 msecs
[ 1.316411] initcall irq_debugfs_init+0x0/0x50 returned with error code -12
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
There is a delay in the transition to the stopped state for class 2
interrupts. In some cases, the controlling thread detects the state of
the spu as running, and goes back to sleep resulting in a hung
application as the event is missed.
This change detects the stop condition and re-generates the wakeup event
after a context save.
Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Time slicing can occur at the same time as spu exception handling
resulting in the wakeup of the wrong thread.
This change uses the the spu's register_lock to enforce synchronization
between bind/unbind and spu exception handling so that they are
mutually exclusive.
Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
According to the CBEA, the SPU dsisr is not updated for class 0
exceptions.
spu_stopped() is testing the dsisr that was passed to it from the class
0 exception handler, so we return a false positive here.
This patch cleans up the interrupt handler and erroneous tests in
spu_stopped. It also removes the fields from the csa since it is not
needed to process class 0 events.
Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
If the spu is stopping (ie, the SPU_STATUS_RUNNING bit is still set),
re-read the register to get the final stopped value.
Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: fixup write combine comment in pci_mmap_resource
x86: PAT export resource_wc in pci sysfs
x86, pci-dma.c: don't always add __GFP_NORETRY to gfp
suspend-vs-iommu: prevent suspend if we could not resume
x86: pci-dma.c: use __GFP_NO_OOM instead of __GFP_NORETRY
pci, x86: add workaround for bug in ASUS A7V600 BIOS (rev 1005)
PCI: use dev_to_node in pci_call_probe
PCI: Correct last two HP entries in the bfsort whitelist
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
parisc: update my email address
parisc: fix miscompilation of ip_fast_csum with gcc >= 4.3
parisc: fix off by one in setup_sigcontext32
parisc: export empty_zero_page
parisc: export copy_user_page_asm
parisc: move head.S to head.text section
Revert "parisc: fix trivial section name warnings"
Recently (around 2.6.25) I've noticed that RTC no longer works for me. It
turned out this is because I use pnpacpi=off kernel option to work around
the parport_pc bugs. I always did so, but RTC used to work fine in the
past, and now it have regressed.
The patch fixes the problem by creating the platform device for the RTC
when PNP is disabled. This may also help running the PNP-enabled kernel
on an older PCs.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fedora broke PTRACE_SYSEMU again, and UML crashes as a result when it
doesn't need to. This patch makes the PTRACE_SYSEMU check fail gracefully
and makes UML fall back to PTRACE_SYSCALL.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I allowed an include of asm/user.h to sneak back in. This patch replaces
it with sys/user.h.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The coldfire timer must be initialised to n - 1 if we want it to count n
cycles between each tick interrupt. This was already fixed, but has been
lost with the conversion to GENERIC_TIMER.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changed the call to find_e820_area_size to pass u64 instead of unsigned long.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alessandro Suardi reported:
> Recently upgraded my FC6 desktop to Fedora 9; with the
> latest nautilus RPM updates my VNC session went nuts
> with nautilus pegging the CPU for everything that breathed.
>
> I now reverted to an earlier nautilus package, but during
> the peak CPU period my kernel spat this:
>
> [314185.623294] ------------[ cut here ]------------
> [314185.623414] WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128()
> [314185.623514] Modules linked in: iptable_filter ip_tables x_tables
> sunrpc ipv6 fuse snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart
> snd_rawmidi via686a hwmon parport_pc sg parport uhci_hcd ehci_hcd
> [314185.623924] Pid: 12314, comm: nautilus Not tainted 2.6.26-rc5-git2 #4
> [314185.624021] [<c0115b95>] warn_on_slowpath+0x41/0x7b
> [314185.624021] [<c010de70>] ? do_page_fault+0x2c1/0x5fd
> [314185.624021] [<c0128396>] ? up_read+0x16/0x28
> [314185.624021] [<c010de70>] ? do_page_fault+0x2c1/0x5fd
> [314185.624021] [<c012fa33>] ? __lock_acquire+0xbb4/0xbc3
> [314185.624021] [<c012d0a0>] check_flags+0x4c/0x128
> [314185.624021] [<c012fa73>] lock_acquire+0x31/0x7d
> [314185.624021] [<c0128cf6>] __atomic_notifier_call_chain+0x30/0x80
> [314185.624021] [<c0128cc6>] ? __atomic_notifier_call_chain+0x0/0x80
> [314185.624021] [<c0128d52>] atomic_notifier_call_chain+0xc/0xe
> [314185.624021] [<c0128d81>] notify_die+0x2d/0x2f
> [314185.624021] [<c01043b0>] do_int3+0x1f/0x4d
> [314185.624021] [<c02f2d3b>] int3+0x27/0x2c
> [314185.624021] =======================
> [314185.624021] ---[ end trace 1923f65a2d7bb246 ]---
> [314185.624021] possible reason: unannotated irqs-off.
> [314185.624021] irq event stamp: 488879
> [314185.624021] hardirqs last enabled at (488879): [<c0102d67>]
> restore_nocheck+0x12/0x15
> [314185.624021] hardirqs last disabled at (488878): [<c0102dca>]
> work_resched+0x19/0x30
> [314185.624021] softirqs last enabled at (488876): [<c011a1ba>]
> __do_softirq+0xa6/0xac
> [314185.624021] softirqs last disabled at (488865): [<c010476e>]
> do_softirq+0x57/0xa6
>
> I didn't seem to find it with some googling, so here it is.
>
> I was incidentally ltracing that process to try and find out
> what was gulping down that much CPU (sorry, no idea
> whether ltrace and the WARNING happened at the same
> time or which came first) and:
Yeah, this is extremely likely to be the source of the warning.
The warning should be harmless, however.
> Box is my trusty noname K7-800, 512MB RAM; if there's
> anything else useful I might be able to provide, just ask.
It would be interesting to see where the int3 comes from. Too bad,
lockdep doesn't provide the register dump. The stacktrace also doesn't
go further than the int3(), I wonder if this int3 came from userspace?
The ltrace readme says "software breakpoints, like gdb", so I guess
this is the case. Yep, seems like it.
This looks relevant:
| commit fb1dac909d
| Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
| Date: Wed Jan 16 09:51:59 2008 +0100
|
| lockdep: more hardirq annotations for notify_die()
I'm attaching a similarly-looking patch for this case (DO_VM86_ERROR),
though I suspect it might be missing for the other cases
(DO_ERROR/DO_ERROR_INFO) as well.
Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix an incompatible pointer type warning on x86_64 compilations.
early_memtest() is passing a u64* to find_e820_area_size() which is expecting
an unsigned long. Change t_start and t_size to unsigned long as those are
also 64-bit types on x88_64.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This reverts commit 6e908947b4.
Németh Márton reported:
| there is a problem in 2.6.26-rc3 which was not there in case of
| 2.6.25: the CPU wakes up ~90,000 times per sec instead of ~60 per sec.
|
| I also "git bisected" the problem, the result is:
|
| 6e908947b4 is first bad commit
| commit 6e908947b4
| Author: Ingo Molnar <mingo@elte.hu>
| Date: Fri Mar 21 14:32:36 2008 +0100
|
| x86: fix ioapic bug again
the original problem is fixed by Maciej W. Rozycki in the tip/x86/apic
branch (confirmed by Márton), but those changes are too intrusive for
v2.6.26 so we'll go for the less intrusive (repeated) revert now.
Reported-and-bisected-by: Németh Márton <nm127@freemail.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote:
> It also causes these warnings on 32-bit PAE:
>
> AS arch/x86/kernel/head_32.o
> arch/x86/kernel/head_32.S: Assembler messages:
> arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
> arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed
>
> and I do not see why (the end result seems to be identical).
Fix head_32.S gcc bignum warnings when CONFIG_PAE=y.
arch/x86/kernel/head_32.S: Assembler messages:
arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed
The assembler was stumbling over the 64-bit constant 0x100000000 in the
KPMDS #define.
Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged.
Signed-off-by: Joe Korty <joe.korty@ccur.com
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: "Siddha Suresh B" <suresh.b.siddha@intel.com>
Cc: bugme-daemon@bugzilla.kernel.org
Cc: airlied@linux.ie
Cc: "Barnes Jesse" <jesse.barnes@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Page faults in kernel address space between PAGE_OFFSET up to
VMALLOC_START should not try to map as vmalloc.
Fix rarely endless page faults inside mount_block_root for root
filesystem at boot time.
All 32bit kernels up to 2.6.25 can fail into this hole.
I can not present this under native linux kernel. I see, that the 64bit
has fixed the problem. I copied the same lines into 32bit part.
Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation):
http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt
The physicaly memory was trimmed down to 192MB to better catch the bug.
More memory gets the bug more rarely.
Details, how every x86 32bit system can fail:
Start from "mount_block_root",
http://lxr.linux.no/linux/init/do_mounts.c#L297
There the variable "fs_names" got one memory page with 4096 bytes.
Variable "p" walks through the existing file system types. The first
string is no problem.
But, with the second loop in mount_block_root the offset of "p" is not
at beginning of page, the offset is for example +9, if "reiserfs" is the
first in list.
Than calls do_mount_root, and lands in sys_mount.
Remember: Variable "type_page" contains now "fs_type+9" and not contains
a full page.
The sys_mount copies 4096 bytes with function "exact_copy_from_user()":
http://lxr.linux.no/linux/fs/namespace.c#L1540
Mostly exist pages after the buffer "fs_names+4096+9" and the page fault
handler was not called. No problem.
In the case, if the page after "fs_names+4096" is not mapped, the page
fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320
The do_page_fault gots an address 0xc03b4000.
It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's
from "__getname()" alias "kmem_cache_alloc".
The "error_code" is 0. "vmalloc_fault" will be call:
http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332
"vmalloc_fault" tryed to find the physical page for a non existing
virtual memory area. The macro "pte_present" in vmalloc_fault()
got a next page fault for 0xc0000ed0 at:
http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282
No PTE exist for such virtual address. The page fault handler was trying
to sync the physical page for the PTE lockup.
This called vmalloc_fault() again for address 0xc000000, and that also
was not existing. The endless began...
In normal case the cpu would still loop with disabled interrrupts. Under
coLinux this was catched by a stack overflow inside printk debugs.
Signed-off-by: Henry Nestler <henry.nestler@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'core/iter-div' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
always_inline timespec_add_ns
add an inlined version of iter_div_u64_rem
common implementation of iterative div/mod
We have a few instances of the open-coded iterative div/mod loop, used
when we don't expcet the dividend to be much bigger than the divisor.
Unfortunately modern gcc's have the tendency to strength "reduce" this
into a full mod operation, which isn't necessarily any faster, and
even if it were, doesn't exist if gcc implements it in libgcc.
The workaround is to put a dummy asm statement in the loop to prevent
gcc from performing the transformation.
This patch creates a single implementation of this loop, and uses it
to replace the open-coded versions I know about.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
check_sal_cache_flush is used to detect broken firmware that drops
pending interrupts.
The old implementation schedules a timer interrupt for itself in
the future by getting the current value of the Interval Timer
Counter + 1000 cycles, waits for the interrupt to be pended, calls
SAL_CACHE_FLUSH, and finally checks to see if the interrupt is
still pending.
This implementation can cause problems for virtual machine code if
the process of scheduling the timer interrupt takes more than 1000
cycles; the virtual machine can end up sleeping for several hundred
years while waiting for the ITC to wrap around.
The fix is to use platform_send_ipi. The processor will still send
an interrupt to itself, using the IA64_IPI_DM_INT delivery mode,
which causes the IPI to look like an external interrupt. The rest
of the SAL_CACHE_FLUSH + checking to see if the interrupt is still
pending remains unchanged.
This fix has been boot tested successfully on:
- intel tiger2
- hp rx6600
- hp rx5670
The rx5670 has known buggy firmware, where SAL_CACHE_FLUSH drops
pending interrupts. A boot test on this machine showed this message
on the console:
SAL: SAL_CACHE_FLUSH drops interrupts; PAL_CACHE_FLUSH will be used instead
Which proves that the self-inflicted IPI approach is viable. And
as expected, the other tested platforms correctly did not display
the warning.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This is a SLIT sanity checking patch. It moves slit_valid() function to
generic ACPI code and does sanity checking for both x86 and ia64. It sets up
node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid
SLIT table on ia64. It also cleans up unused variable localities in
acpi_parse_slit() on x86.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The list search success check in arch/arm/mach-pxa/ssp.c is wrong: for
example, it didn't recognise failure for me when I requested port 0.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Move the cleanup of the async queue to the close callback from the flush
callback. This avoids losing asynchronous overflow notifications when
the file descriptor is shared by multiple processes and one terminates.
Signed-off-by: Stephane Eranian <eranian@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: MMU: Fix is_empty_shadow_page() check
KVM: MMU: Fix printk() format string
KVM: IOAPIC: only set remote_irr if interrupt was injected
KVM: MMU: reschedule during shadow teardown
KVM: VMX: Clear CR4.VMXE in hardware_disable
KVM: migrate PIT timer
KVM: ppc: Report bad GFNs
KVM: ppc: Use a read lock around MMU operations, and release it on error
KVM: ppc: Remove unmatched kunmap() call
KVM: ppc: add lwzx/stwz emulation
KVM: ppc: Remove duplicate function
KVM: s390: Fix race condition in kvm_s390_handle_wait
KVM: s390: Send program check on access error
KVM: s390: fix interrupt delivery
KVM: s390: handle machine checks when guest is running
KVM: s390: fix locking order problem in enable_sie
KVM: s390: use yield instead of schedule to implement diag 0x44
KVM: x86 emulator: fix hypercall return value on AMD
KVM: ia64: fix zero extending for mmio ld1/2/4 emulation in KVM
Without simpleImage% in the BOOT_TARGETS list, it is impossible to
build any of the simpleImages.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.
If not, ethernet will not work:
e0024520:03 not found
eth1: Could not attach to PHY
IP-Config: Failed to open eth1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Currently arch/x86/kernel/pci-dma.c always adds __GFP_NORETRY
to the allocation flags, because it wants to be reasonably
sure not to deadlock when calling alloc_pages().
But really that should only be done in two cases:
- when allocating memory in the lower 16 MB DMA zone.
If there's no free memory there, waiting or OOM killing is of no use
- when optimistically trying an allocation in the DMA32 zone
when dma_mask < DMA_32BIT_MASK hoping that the allocation
happens to fall within the limits of the dma_mask
Also blindly adding __GFP_NORETRY to the the gfp variable might
not be a good idea since we then also use it when calling
dma_ops->alloc_coherent(). Clearing it might also not be a
good idea, dma_alloc_coherent()'s caller might have set it
on purpose. The gfp variable should not be clobbered.
[ mingo@elte.hu: converted to delta patch ontop of previous version. ]
Signed-off-by: Miquel van Smoorenburg <miquels@cistron.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The first argument to __ctl_store() should be the array to store
stuff in, not just the first element of that array. With the
current code in __cpu_up(), mainline GCC dies with an internal
compiler error. I didn't diagnose that further, but just fixed
the kernel bug.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
If a memory range is supposed to be added to the 1:1 mapping and it
ends just below the maximum supported physical address it won't
succeed. This is because a test doesn't consider that the end address
is 1 smaller than start + size.
Fix the comparison.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case of !64BIT kernel we end up with a zero sized mem_section array.
This happens because NR_MEM_SECTIONS is smaller than SECTIONS_PER_ROOT
but we have:
#define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT)
and
struct mem_section *mem_section[NR_SECTION_ROOTS];
So fix this by selecting SPARSEMEM_STATIC which makes sure
that SECTIONS_PER_ROOT is 1.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin serial driver: fix up tty core set_ldisc API change breakage bug
Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN
Blackfin arch: fixup warnings with the new cplb saved values
Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver.
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
[POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG
[POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n
[POWERPC] Use dev_set_name in pci_64.c
[POWERPC] Fix incorrect enabling of VMX when building signal or user context
[POWERPC] boot/Makefile CONFIG_ variable fixes
Update the defconfig for the Freescale MPC8610 HPCD board. Enable module
support. Disable support for all NICs except for the on-board ULI526x.
Enable support for the Freescale DIU driver. Increase the maximum zone order
to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers.
Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andrew Klossner pointed out the IO space size was in violation of
the alignment requirements for windows on the 85xx. The size should
have been 1M (to match u-boot).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
The MPC85xx MDS board requires some board level tweaks of the PHYs that
either the eTSEC (gianfar) or UCC ethernet controllers are connected to.
Its possible to build the phylib as a module, however this breaks the
board level fix ups because phy_read and phy_write are not available
if we build as a module.
So we unconditionally select PHYLIB to ensure its built into the kernel
if we are building in MPC85xx MDS support. This was determined to be
the easiest soultion even though it prevents the user from removing
PHYLIB support if they decide they don't want it.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Presently the --fdpic specifier and the --isa matching clash when
building with FDPIC toolchains. As we have no interest in building the
kernel with --fdpic in the first place, always try to add in -mno-fdpic
to the default flags.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
SH7763's setup code use old DECLARE_INTC_DESC.
There was a compile error because of this.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The ehea driver was recently changed[1] to use walk_memory_resource() to
detect the system's memory layout. However, walk_memory_resource() is
available only when memory hotplug is enabled. So CONFIG_EHEA was
made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a
network driver to have such a dependency.
Make the declaration of walk_memory_resource() and its powerpc
implementation (ehea is powerpc-specific) unconditionally available.
[1] 48cfb14f8b
"ehea: Add DLPAR memory remove support"
[2] fb7b6ca2b6
"ehea: Add dependency to Kconfig"
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
During the next merge window, pci_name()'s return value will become
const, so use the new dev_set_name() instead to avoid the warning (from
linux-next):
arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev':
arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When building a signal or a ucontext, we can incorrectly set the MSR_VEC
bit of the kernel pt_regs->msr before returning to userspace if the task
-ever- used VMX.
This can lead to funny result if that stack used it in the past, then
"lost" it (ie. it wasn't enabled after a context switch for example)
and then called get_context. It can end up with VMX enabled and the
registers containing values from some other task.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This corrects the names of two CONFIG_ variables.
Note that the CONFIG_MPC86XADS fix uncovers another bug
(with mpc866_ads_defconfig) that will require fixing:
<-- snip -->
...
arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts
DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts"
WRAP arch/powerpc/boot/cuImage.mpc866ads
powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory
make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1
<-- snip -->
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
x86/PCI: add workaround for bug in ASUS A7V600 BIOS (rev 1005)
PCI/x86: fix up PCI stuff so that PCI_GOANY supports OLPC
Shadows for large guests can take a long time to tear down, so reschedule
occasionally to avoid softlockup warnings.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Clear CR4.VMXE in hardware_disable. There's no reason to leave it set
after doing a VMXOFF.
VMware Workstation 6.5 checks CR4.VMXE as a proxy for whether the CPU is
in VMX mode, so leaving VMXE set means we'll refuse to power on. With this
change the user can power on after unloading the kvm-intel module. I
tested on kvm-67 and kvm-69.
Signed-off-by: Eli Collins <ecollins@vmware.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Change the name of the device from "rtc-ds1374" to just "ds1374", to match
what all other RTC drivers do. I seem to remember that this name was
chosen to avoid possible confusion with an older ds1374 driver, but that
driver was removed 3 months ago.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although if people have questions about ARCnet, perhaps it's _better_
for them to be mailing dwmw2@cam.ac.uk about it...
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Include limits.h to get a definition of PATH_MAX.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We lost the marking of SIGWINCH as being OK to receive during stub
execution, causing a panic should that happen.
Cc: Benedict Verheyen <benedict.verheyen@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
x86_64 defines either memcpy or __memcpy depending on the gcc version, and
it looks like UML needs to follow that in its exporting.
Cc: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes os_get_task_size locate the bottom of the address space,
as well as the top. This is for systems which put a lower limit on mmap
addresses. It works by manually scanning pages from zero onwards until a
valid page is found.
Because the bottom of the address space may not be zero, it's not
sufficient to assume the top of the address space is the size of the
address space. The size is the difference between the top address and
bottom address.
[jdike@addtoit.com: changed the name to reflect that this function is
supposed to return the top of the process address space, not its size and
changed the return value to reflect that. Also some minor formatting
changes]
Signed-off-by: Tom Spink <tspink@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removed duplicated include file "kern_util.h" in
arch/um/drivers/ubd_kern.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Protection against the host's time going backwards (eg, ntp activity on
the host) by keeping track of the time at the last tick and if it's
greater than the current time, keep time stopped until the host catches
up.
Cc: Nix <nix@esperi.org.uk>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As some m68k machines have plenty of libc5 binaries in active use, enable
CONFIG_COMPAT_BRK by default.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on,
similarly to what is done for the LAPIC timers, otherwise PIT interrupts
will be delayed until an unrelated event causes an exit.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This code shouldn't be hit anyways, but when it is, it's useful to have a
little more information about the failure.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
gfn_to_page() and kvm_release_page_clean() are called from other contexts with
mmap_sem locked only for reading.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
