Move the `struct ieee80211_chanctx_conf conf` to the end of
`struct ieee80211_chanctx` and fix a memory corruption bug
triggered e.g. in `hwsim_set_chanctx_magic()`: `radar_detected`
is being overwritten when `cp->magic = HWSIM_CHANCTX_MAGIC;`
See the function call sequence below:
drv_add_chanctx(... struct ieee80211_chanctx *ctx) ->
local->ops->add_chanctx(&local->hw, &ctx->conf) ->
mac80211_hwsim_add_chanctx(... struct ieee80211_chanctx_conf *ctx) ->
hwsim_set_chanctx_magic(ctx)
This also happens in a number of other drivers.
Also, add a code comment to try to prevent people from introducing
new members after `struct ieee80211_chanctx_conf conf`. Notice that
`struct ieee80211_chanctx_conf` is a flexible structure --a structure
that contains a flexible-array member, so it should always be at
the end of any other containing structures.
This change also fixes 50 of the following warnings:
net/mac80211/ieee80211_i.h:895:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Fixes: bca8bc0399 ("wifi: mac80211: handle ieee80211_radar_detected() for MLO")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZxwWPrncTeSi1UTq@kspp
[also refer to other drivers in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_calc_hw_conf_chan was ignoring the configured
user_txpower. If it is set, use it to potentially decrease
txpower as requested.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20241010203954.1219686-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcWl7MRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv0Qgf/fQJKXkGJkvozrbJATkKHfHKUOphIl4Y8
/r3SlrsIL6qXZAUq5N+NH9vfUeKt5kkKG8Fc8yrJaygDLsV9v1LGiBSsb5eJ+PfM
4fCOdzPSrWG984dLwsCK8UGEzfQ1G4d6HckwubUMimK2X/m6wx/99fenjMAQvdWO
rjAJmpAkgoT0Fvf8GD3joMBKKjMFr2KT8tgbfvwpyr9cXAPZYf35+74Nl84UjHiP
rGTGN++NQuPMsYyYIPPA+eMNUnlUVyDah+UVmzsMp27YUdKBKjx23kRH6tKM/46H
dWqpqEV50xshlPaotHoFg9+4KRrxnxwvFtGTsnbvHcuSnkPBUusAvw==
=l6SI
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
Call to ieee80211_color_collision_detection_work() needs wiphy lock to
be held (see lockdep assert in cfg80211_bss_color_notify()). Not locking
wiphy causes the following lockdep error:
WARNING: CPU: 2 PID: 42 at net/wireless/nl80211.c:19505 cfg80211_bss_color_notify+0x1a4/0x25c
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:3 Tainted: G W 6.4.0-02327-g36c6cb260481 #1048
Hardware name:
Workqueue: phy1 ieee80211_color_collision_detection_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cfg80211_bss_color_notify+0x1a4/0x25c
lr : cfg80211_bss_color_notify+0x1a0/0x25c
sp : ffff000002947d00
x29: ffff000002947d00 x28: ffff800008e1a000 x27: ffff000002bd4705
x26: ffff00000d034000 x25: ffff80000903cf40 x24: 0000000000000000
x23: ffff00000cb70720 x22: 0000000000800000 x21: ffff800008dfb008
x20: 000000000000008d x19: ffff00000d035fa8 x18: 0000000000000010
x17: 0000000000000001 x16: 000003564b1ce96a x15: 000d69696d057970
x14: 000000000000003b x13: 0000000000000001 x12: 0000000000040000
x11: 0000000000000001 x10: ffff80000978f9c0 x9 : ffff0000028d3174
x8 : ffff800008e30000 x7 : 0000000000000000 x6 : 0000000000000028
x5 : 000000000002f498 x4 : ffff00000d034a80 x3 : 0000000000800000
x2 : ffff800016143000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
cfg80211_bss_color_notify+0x1a4/0x25c
ieee80211_color_collision_detection_work+0x20/0x118
process_one_work+0x294/0x554
worker_thread+0x70/0x440
kthread+0xf4/0xf8
ret_from_fork+0x10/0x20
irq event stamp: 77372
hardirqs last enabled at (77371): [<ffff800008a346fc>] _raw_spin_unlock_irq+0x2c/0x4c
hardirqs last disabled at (77372): [<ffff800008a28754>] el1_dbg+0x20/0x48
softirqs last enabled at (77350): [<ffff8000089e120c>] batadv_send_outstanding_bcast_packet+0xb8/0x120
softirqs last disabled at (77348): [<ffff8000089e11d4>] batadv_send_outstanding_bcast_packet+0x80/0x120
The wiphy lock cannot be taken directly from color collision detection
delayed work (ieee80211_color_collision_detection_work()) because this
work is cancel_delayed_work_sync() under this wiphy lock causing a
potential deadlock( see [0] for details).
To fix that ieee80211_color_collision_detection_work() could be
converted to a wiphy work and cancel_delayed_work_sync() can be simply
replaced by wiphy_delayed_work_cancel() serving the same purpose under
wiphy lock.
This could potentially fix [1].
[0]: https://lore.kernel.org/linux-wireless/D4A40Q44OAY2.W3SIF6UEPBUN@freebox.fr/
[1]: https://lore.kernel.org/lkml/000000000000612f290618eee3e5@google.com/
Reported-by: Nicolas Escande <nescande@freebox.fr>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-3-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b9 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support DFS with MLO, handle the link ID now passed from
cfg80211, adjust the code to do everything per link and call the
notifications to cfg80211 correctly.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-7-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit ce9e660ef3 ("wifi: mac80211: move radar detect work to sdata").
To enable radar detection with MLO, it’s essential to handle it on a
per-link basis. This is because when using MLO, multiple links may already
be active and beaconing. In this scenario, another link should be able to
initiate a radar detection. Also, if underlying links are associated with
different hardware devices but grouped together for MLO, they could
potentially start radar detection simultaneously. Therefore, it makes
sense to manage radar detection settings separately for each link by moving
them back to a per-link data structure.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add definitions related to EHT mode and airtime calculation
according to the 802.11BE_D4.0.
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240904111256.11734-1-mingyen.hsieh@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the original file is guaranteed to contain the minmax.h header
file and compile correctly, using the real macro is usually
more intuitive and readable.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240827103012.3853588-1-yanzhen@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check for missing VHT Capabilities and VHT Operation elements in
association response frame only for 5 GHz links.
Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827103920.dd711282d543.Iaba245cebc52209b0499d5bab7d8a8ef1df9dd65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of places where RCU list iteration is
used, but that aren't (always) called with RCU held. Use
just list_for_each_entry() in most, and annotate iface
iteration with the required locks.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20240827072115.42680-1-shenlichuan@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't
report TX status to mac80211, causing ieee80211_free_ack_frame() warns
"Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers
to not have to reimplement it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we had a comeback, we will never use the default timeout values
again because comeback is never cleared.
Clear comeback if we send another association request which will allow
to start a default timer after Tx status.
The problem was seen with iwlwifi where the tx_status on the association
request is handled before the association response frame (which is the
usual case).
1) Tx assoc request 1/3
2) Rx assoc response (comeback, timeout = 1 second)
3) wait 1 second
4) Tx assoc request 2/3
5) Set timer to IEEE80211_ASSOC_TIMEOUT_LONG = 500ms (1 second after
round_up)
6) tx_status on frame sent in 4) is ignored because comeback is still
true
7) AP does not reply with assoc response
8) wait 1s <= This is where the bug is felt
9) Tx assoc request 3/3
With this fix, in step 6 we will reset the timer to
IEEE80211_ASSOC_TIMEOUT_SHORT = 100ms and we will wait only 100ms in
step 8.
Fixes: b133fdf07d ("wifi: mac80211: Skip association timeout update after comeback rejection")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808085916.23519-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may at times want to iterate their stations with a function
which requires some non-atomic operations.
ieee80211_iterate_stations_mtx() introduces an API to iterate stations
while holding that wiphy's mutex. This allows the iterating function to
do non-atomic operations safely.
Signed-off-by: Rory Little <rory@candelatech.com>
Link: https://patch.msgid.link/20240806004024.2014080-2-rory@candelatech.com
[unify internal list iteration functions]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between
'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()',
and 'ieee80211_send_delba()', ensure that all related addresses
are '__aligned(2)', and prefer convenient 'ether_addr_copy()'
over generic 'memcpy()'. No functional changes expected.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 'ieee80211_beacon_get_ap()', free allocated skb in case of error
returned by 'ieee80211_beacon_protect()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240805142035.227847-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit 0d9c2beed1 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
Cc: stable@vger.kernel.org
Fixes: 0d9c2beed1 ("wifi: mac80211: fix monitor channel with chanctx emulation")
Reported-by: ZeroBeat <ZeroBeat@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the CSA is announced with only HT elements, the AP
chandef isn't captured correctly, leading to crashes in
the later code that checks for TPE changes during CSA.
Capture the AP chandef correctly in both cases to fix
this.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 4540568136 ("wifi: mac80211: handle TPE element during CSA")
Link: https://patch.msgid.link/20240709160851.47805f24624d.I024091f701447f7921e93bb23b46e01c2f46347d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chanctx emulation didn't info IEEE80211_CONF_CHANGE_CHANNEL to drivers
during ieee80211_restart_hw (ieee80211_emulate_add_chanctx). It caused
non-chanctx drivers to not stand on the correct channel after recovery.
RX then behaved abnormally. Finally, disconnection/reconnection occurred.
So, set IEEE80211_CONF_CHANGE_CHANNEL when in_reconfig.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Link: https://patch.msgid.link/20240709073531.30565-1-kevin_yang@realtek.com
Cc: stable@vger.kernel.org
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do not check BSS color collision in following cases
1. already under a color change
2. color change is disabled
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20240705074346.11228-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The color change finalize work might be called after the link is
stopped, which might lead to a kernel crash.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20240705074326.11172-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid reusing stale driver data when an interface is brought down and up
again. In order to avoid having to duplicate the memset in every single
driver, do it here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20240704130947.48609-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This flag is annoying because it puts a lot of logic into mac80211
that could just as well be in the driver (only iwlmvm uses it) and
the implementation is also broken for MLO.
Remove the flag in favour of calling drv_mgd_prepare_tx() without
any conditions even for the deauth-while-assoc case. The drivers
that implement it can take the appropriate actions, which for the
only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky
than the implementation in mac80211 is anyway, and all others have
no need and can just exit if info->was_assoc is set.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The beacon processing should be fully done in the context of the link.
This also resolves a bug with CQM handling with MLO as in such a case
the RSSI thresholds configuration is maintained in the link context and
not in the interface context.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20240627104600.bb2f0f697881.I675b6a8a186b717f3eef79113c27361fd1a7622c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
