dc537189b5
6444 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Alexander Usyskin
|
4adf613e01 |
mei: use kvmalloc for read buffer
Read buffer is allocated according to max message size, reported by
the firmware and may reach 64K in systems with pxp client.
Contiguous 64k allocation may fail under memory pressure.
Read buffer is used as in-driver message storage and not required
to be contiguous.
Use kvmalloc to allow kernel to allocate non-contiguous memory.
Fixes:
|
||
Linus Torvalds
|
c55228220d |
Char/Misc/IIO fixes for 6.12-rc4
Here are a number of small char/misc/iio driver fixes for 6.12-rc4. Included in here are the following: - loads of small iio driver fixes for reported problems - parport driver out-of-bounds fix - Kconfig description and MAINTAINERS file updates All of these, except for the Kconfig and MAINTAINERS file updates have been in linux-next all week. Those other two are just documentation changes and will have no runtime issues and were merged on Friday. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUGYg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynTCQCggBy+iX/11utliIaNKD2PHkB5BjQAn1igXYZI hgWphEoTvBtVgGfOzNwt =0mak -----END PGP SIGNATURE----- Merge tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fixes from Greg KH: "Here are a number of small char/misc/iio driver fixes for 6.12-rc4: - loads of small iio driver fixes for reported problems - parport driver out-of-bounds fix - Kconfig description and MAINTAINERS file updates All of these, except for the Kconfig and MAINTAINERS file updates have been in linux-next all week. Those other two are just documentation changes and will have no runtime issues and were merged on Friday" * tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits) misc: rtsx: list supported models in Kconfig help MAINTAINERS: Remove some entries due to various compliance requirements. misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device parport: Proper fix for array out-of-bounds access iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ... |
||
Yo-Jung (Leo) Lin
|
9b673c7551 |
misc: rtsx: list supported models in Kconfig help
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but they are not mentioned in the Kconfig help when the code was added. List those models in the Kconfig help accordingly. Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com> Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Heiko Thiery
|
2471787c1f |
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes:
|
||
Heiko Thiery
|
3c2d73de49 |
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes:
|
||
Dimitri Sivanich
|
b983b27166 |
misc: sgi-gru: Don't disable preemption in GRU driver
Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich <sivanich@hpe.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Al Viro
|
5f60d5f6bb |
move asm/unaligned.h to linux/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h |
||
Al Viro
|
cb787f4ac0 |
[tree-wide] finally take no_llseek out
no_llseek had been defined to NULL two years ago, in commit
|
||
Linus Torvalds
|
5e5466433d |
Char/Misc and other driver changes for 6.12-rc1
Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Sorry for the delay, conference travel for the past two weeks has this and my other pull requests showing up real late in the cycle. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/ mLXk2wxl5+dt/dfNgZIp =x5HV -----END PGP SIGNATURE----- Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits) greybus: gb-beagleplay: Add firmware upload API arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7 dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios MAINTAINERS: Update path for U-Boot environment variables YAML nvmem: layouts: add U-Boot env layout comedi: ni_routing: tools: Check when the file could not be opened ocxl: Remove the unused declarations in headr file hpet: Fix the wrong format specifier uio: Constify struct kobj_type cxl: Constify struct kobj_type binder: modify the comment for binder_proc_unlock iio: adc: axp20x_adc: add support for AXP717 ADC dt-bindings: iio: adc: Add AXP717 compatible iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0 tools: iio: rm .*.cmd when make clean iio: adc: standardize on formatting for id match tables iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems ... |
||
Linus Torvalds
|
7856a56541 |
Many singleton patches - please see the various changelogs for details.
Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. "nilfs2: assorted cleanups" from Huang Xiaojia. "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM 3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ= =/NWE -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ... |
||
Linus Torvalds
|
7fced2a78a |
MMC core:
- Add documentation for the mmc-test driver - Register the eMMC RPMB partition with the RPMB subsystem - Some various cleanups MMC host: - dw_mmc-rockchip: Add support for the RK3576 variant - renesas_sdhi: Add support for the RZ/V2H(P) variant - sdhci_am654: Add a retry mechanism for tuning - sdhci-atmel: Convert DT bindings to json schema - sdhci-of-dwcmshc: Add eMMC HW reset support for BlueField-3 SoC - sdhci-of-dwcmshc: Add support for the RK3576 variant - sdhci-of-dwcmshc: Add support for the Sophgo SG2042 variant - sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI Misc/Tee: - Add Replay Protected Memory Block (RPMB) subsystem - Let optee probe RPMB device using RPMB subsystem -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmboQbkXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjClXCBAAg1X6Q+4Mx4LZszDWeSDQfH4d dbD3RDz8vTBCGrOzZT5Ak+0d3aSeJv5Fxz2XTp4W8D5KXm8HdYC1x7c81StL104k yu5xG53u3D9qerwqaw/EGPqW9LUpsMRBRepbHlI9pH7hfmv9oqZXHl9hRnnDDrDJ FMNz9PrUdEUCk8RP9StyYIKUpe1VsIlBa1xNXXuDqt3d70UgX7odIOGOXdWv12CV zSB7Y7FlNBk1A/EJ4ptrfOc3RnCOtq1+j2D5TrOQ16rPC5Ud55XMNjrRir57nl3O ikd/hXUc7cklbYMv1K61aSAv0mTODkZ2P78buP/6dz1NUeFeoXkYfFR2eTeCDNdD H+TieLw2g5p0cDEq21K4V6ZyzC3kh8qhrza9EXVgFfg6WkbxHxFzSb9heOr1K8pn 2yOLaDRlzHWPU6jOIMHeZgnvWOIVcIlHGu7qMKTDsnJh2Ot+HPjsNoToiWnCEvvs UbfWRfcdLCxkmqHS3dROJ8d6rPa1bDXy4/MZxjDzhKCarW1ZS2n4N55qeuM6Fb9s VjT43HlqgA/Jlo9zUDvkDG4Zblo22zQRBsyccqD8W4T+hnR917NA7/808ZogFdHX WjHYYWkCOjaZcVv5T9ZztVm0nTgeeM1/cAPyo8JlbVtBX2ZBJtiIW6bqWxGCw+Vw vxI5ht9AeVDTHixKK+U= =en1i -----END PGP SIGNATURE----- Merge tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add documentation for the mmc-test driver - Register the eMMC RPMB partition with the RPMB subsystem - Some various cleanups MMC host: - dw_mmc-rockchip: Add support for the RK3576 variant - renesas_sdhi: Add support for the RZ/V2H(P) variant - sdhci_am654: Add a retry mechanism for tuning - sdhci-atmel: Convert DT bindings to json schema - sdhci-of-dwcmshc: - Add eMMC HW reset support for BlueField-3 SoC - Add support for the RK3576 variant - Add support for the Sophgo SG2042 variant - sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI Misc/Tee: - Add Replay Protected Memory Block (RPMB) subsystem - Let optee probe RPMB device using RPMB subsystem" * tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (41 commits) mmc: core: Use dev_err_probe for deferred regulators optee: Fix a NULL vs IS_ERR() check mmc: sdhci_am654: Add prints to tuning algorithm mmc: sdhci_am654: Add retry tuning dt-bindings: mmc: Add support for rk3576 eMMC Documentation: mmc: Add mmc-test doc rpmb: fix error path in rpmb_dev_register() optee: add RPMB dependency mmc: block: add RPMB dependency mmc: core Convert UNSTUFF_BITS macro to inline function dt-bindings: mmc: sdhci-atmel: Convert to json schema mmc: core: Convert simple_stroul to kstroul mmc: core: Calculate size from pointer mmc: cqhci: Make use of cqhci_halted() routine mmc: core: Replace the argument of mmc_sd_switch() with defines mmc: dw_mmc-rockchip: Add support for rk3576 SoCs mmc: dw_mmc-rockchip: Add internal phase support dt-bindings: mmc: Add support for rk3576 dw-mshc mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC mmc: core: remove left-over data structure declarations ... |
||
Zhang Zekun
|
0bad57708d |
ocxl: Remove the unused declarations in headr file
The definition of ocxl_create_cdev() and ocxl_destroy_cdev() has been
removed since commit
|
||
Hongbo Li
|
5c09cfa5d2 |
cxl: Constify struct kobj_type
This 'struct kobj_type' is not modified. It is only used in kobject_init_and_add() which takes a 'const struct kobj_type *ktype' parameter. Constifying this structure and moving it to a read-only section, and can increase over all security. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20240904011951.2010646-1-lihongbo22@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
895b4fae93 |
Merge 6.11-rc7 into char-misc-next
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jens Wiklander
|
5854809b51 |
rpmb: fix error path in rpmb_dev_register()
Until this patch was rpmb_dev_register() always freeing rdev in the error
path. However, past device_register() it must not do that since the memory
is now managed by the device even if it failed to register properly. So fix
this by doing a put_device() before returning the error code.
Fixes the smatch warning:
drivers/misc/rpmb-core.c:204 rpmb_dev_register()
warn: freeing device managed memory (leak): 'rdev'
Fixes:
|
||
David Fernandez Gonzalez
|
48b9a8dabc |
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Fixes:
|
||
Gerhard Engleder
|
7d32e779eb |
misc: keba: Fix sysfs group creation
sysfs_create_group() races with userspace. Use dev_groups instead which
prevents all the problems of sysfs_create_group().
Fixes:
|
||
Hongbo Li
|
072e18d63b |
misc: tsl2550: replace simple_strtoul to kstrtoul
The function simple_strtoul performs no error checking in scenarios where the input value overflows the intended output variable. We can replace the use of the simple_strtoul with the safer alternatives kstrtoul. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20240830080311.3545307-1-lihongbo22@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Rob Herring (Arm)
|
e807c406a6 |
misc: lis3lv02d: Fix incorrect of_get_property() usage
The usage of of_get_property() is wrong. What's returned in "val" is the property's length, not the value. Fix this by using the preferred typed of_property_read_u32() function instead. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240828131851.3631855-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Sukrut Bellary
|
e8c276d4dc |
misc: fastrpc: Fix double free of 'buf' in error path
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf.
Fixes:
|
||
Ling Xu
|
dd747494ae |
misc: fastrpc: Add support for cdsp1 remoteproc
The fastrpc supports 4 remoteproc. There are some products which support cdsp1 remoteproc. Add changes to support cdsp1 remoteproc. Signed-off-by: Ling Xu <quic_lxu5@quicinc.com> [Bartosz: ported to mainline] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240902141821.70656-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Jani Nikula
|
6ce2082fd3 |
fault-inject: improve build for CONFIG_FAULT_INJECTION=n
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes:
|
||
Jens Wiklander
|
1e9046e3a1 |
rpmb: add Replay Protected Memory Block (RPMB) subsystem
A number of storage technologies support a specialised hardware partition designed to be resistant to replay attacks. The underlying HW protocols differ but the operations are common. The RPMB partition cannot be accessed via standard block layer, but by a set of specific RPMB commands. Such a partition provides authenticated and replay protected access, hence suitable as a secure storage. The initial aim of this patch is to provide a simple RPMB driver interface which can be accessed by the optee driver to facilitate early RPMB access to OP-TEE OS (secure OS) during the boot time. A TEE device driver can claim the RPMB interface, for example, via rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver provides a callback to route RPMB frames to the RPMB device accessible via rpmb_route_frames(). The detailed operation of implementing the access is left to the TEE device driver itself. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Manuel Traut <manut@mecka.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240814153558.708365-2-jens.wiklander@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
Greg Kroah-Hartman
|
10c8d1bd78 |
Merge 6.11-rc4 into char-misc-next
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Linus Torvalds
|
e1bc113215 |
Char/Misc fixes for 6.11-rc4
Here are some small char/misc fixes for 6.11-rc4 to resolve reported problems. Included in here are: - fastrpc revert of a change that broke userspace - xillybus fixes for reported issues Half of these have been in linux-next this week with no reported problems, I don't know if the last bit of xillybus driver changes made it in, but they are "obviously correct" so will be safe :) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIT4A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymYQACfeV6tIMHlHSVS9VSbiXHJAovjvFEAoLQvuvBS 0dN1Q4iYF+5Sy4JWAZb/ =ztLK -----END PGP SIGNATURE----- Merge tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc fixes from Greg KH: "Here are some small char/misc fixes for 6.11-rc4 to resolve reported problems. Included in here are: - fastrpc revert of a change that broke userspace - xillybus fixes for reported issues Half of these have been in linux-next this week with no reported problems, I don't know if the last bit of xillybus driver changes made it in, but they are 'obviously correct' so will be safe :)" * tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: char: xillybus: Check USB endpoints when probing device char: xillybus: Refine workqueue handling Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD" char: xillybus: Don't destroy workqueue from work item running on it |
||
Linus Torvalds
|
e724918b37 |
hardening fixes for v6.11-rc4
- gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement (Thorsten Blum) - kallsyms: Clean up interaction with LTO suffixes (Song Liu) - refcount: Report UAF for refcount_sub_and_test(0) when counter==0 (Petr Pavlu) - kunit/overflow: Avoid misallocation of driver name (Ivan Orlov) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZr5D6wAKCRA2KwveOeQk u5dXAQC9ddd3iHqDAWfbCLY41/5K3KByFspVqf8hw2sFK3Uq9wD/eWU0hWFIk1gq 1hUSb7vExo+oiahYPKIUMx5Zf69hHAk= =dmVd -----END PGP SIGNATURE----- Merge tag 'hardening-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement (Thorsten Blum) - kallsyms: Clean up interaction with LTO suffixes (Song Liu) - refcount: Report UAF for refcount_sub_and_test(0) when counter==0 (Petr Pavlu) - kunit/overflow: Avoid misallocation of driver name (Ivan Orlov) * tag 'hardening-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kallsyms: Match symbols exactly with CONFIG_LTO_CLANG kallsyms: Do not cleanup .llvm.<hash> suffix before sorting symbols kunit/overflow: Fix UB in overflow_allocation_test gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement refcount: Report UAF for refcount_sub_and_test(0) when counter==0 |
||
Griffin Kroah-Hartman
|
9bb5e74b2b |
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
This reverts commit |
||
Florian Rommel
|
4a017c0163 |
kgdbts: fix hw_access_break_test
The test for access watchpoints (hw_access_break_test) was broken (always failed) because the compiler optimized out the write to the static helper variable (hw_break_val2), as it is never read anywhere. This resulted in the target variable (hw_break_val) not being accessed and thus the breakpoint not being triggered. Remove the helper variable (hw_break_val2), and use READ_ONCE to force reading the target variable (hw_break_val). Signed-off-by: Florian Rommel <mail@florommel.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240812085459.291741-1-mail@florommel.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Greg Kroah-Hartman
|
9ca12e50a4 |
Merge 6.11-rc3 into char-misc-next
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Petr Pavlu
|
f91f7ac900 |
refcount: Report UAF for refcount_sub_and_test(0) when counter==0
When a reference counter is at zero and refcount_sub_and_test() is invoked to subtract zero, the function accepts this request without any warning and returns true. This behavior does not seem ideal because the counter being already at zero indicates a use-after-free. Furthermore, returning true by refcount_sub_and_test() in this case potentially results in a double-free done by its caller. Modify the underlying function __refcount_sub_and_test() to warn about this case as a use-after-free and have it return false to avoid the potential double-free. Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240717130023.5675-1-petr.pavlu@suse.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
Rob Herring (Arm)
|
5c4efc6055 |
cxl: Use of_property_ accessor functions
The CXL driver has its own custom implementations of typed DT property accessors. Replace the custom property accessor functions with the common DT property functions. This clean-up is part of a larger effort to remove of_get_property() and other DT functions which leak pointers to DT node and property data. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-2-a75eea80d231@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Rob Herring (Arm)
|
35fc26541f |
cxl: Drop printing of DT properties
There's little reason to dump DT property values when they can be read at any time from the DT in /proc/device-tree. If such a feature is needed, then it really should be implemented in the DT core such that any module/driver can use it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-1-a75eea80d231@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Arnd Bergmann
|
f528cd5585 |
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
I found one more missing dependency in the new driver: when building
without CONFIG_PCI_IOV, pci_sriov_configure_simple() cannot be
called directly:
drivers/misc/mrvl_cn10k_dpi.c: In function 'dpi_remove':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
include/linux/pci.h:2416:41: note: in expansion of macro 'NULL'
2416 | #define pci_sriov_configure_simple NULL
| ^~~~
drivers/misc/mrvl_cn10k_dpi.c:652:9: note: in expansion of macro 'pci_sriov_configure_simple'
652 | pci_sriov_configure_simple(pdev, 0);
Add this to the Kconfig file as well.
Fixes:
|
||
Armin Wolf
|
e6cd0dc91e |
eeprom: ee1004: Fix locking issues in ee1004_probe()
Currently, the devres-based management of ee1004_bus_data has
several issues when it comes to locking:
1. It does not call mutex_unlock() before returning an error.
2. When encountering an error, it deadlocks when trying to recursively
lock a mutex.
Fix this by moving the mutex-protected bus data initialization into
a separate function so that devm_add_action_or_reset() is called
without the mutex being held.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
Linus Torvalds
|
c2a96b7f18 |
Driver core changes for 6.11-rc1
Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm cJEYtJpGtWX6aAtugm9E =ZyJV -----END PGP SIGNATURE----- Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ... |
||
Linus Torvalds
|
3f386cb8ee |
pci-v6.11-changes
-----BEGIN PGP SIGNATURE-----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=vw2i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
|
||
Linus Torvalds
|
ef035628c3 |
The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char device. For the host drivers, this release includes significant updates, with the primary change being the renaming from "master/slave" to "controller/target" to adhere to I2C v7 and SMBus 3.2 standards. New Support: - Added support for Intel Arrow Lake-H. - Added I2C support in the Arioha SoC by linking the Mediatek I2C controller. Cleanups: - Added the MODULE_DESCRIPTION() macro, resolving a modpost warning in the ALi 1563 Southbridge driver. - Constified the regmap_config declaration in the i2c-designware driver. - Improved the coding style in the Renesas R-Car driver by removing unnecessary semicolons after brackets. General improvements: - In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with RUNTIME_PM_OPS to enable waking up the controller during suspend() before suspend_noirq() kicks in. - Improved logging in the Xilinx driver. - Added a warning (WARN()) in the Renesas R-Car driver for spurious interrupts. DTS Changes: - Removed address-cell and size-cell from the Atmel at91sam, nVidia Tegra 20, and Samsung S3c2410 devices. - Fixed Texas Instruments OMAP4 I2C controller to comply with the i2c-controller.yaml schema. - Improved indentation in DTS examples for several I2C devices. - Converted the NXP LPC1788 binding to the dt-schema. - Added documentation for the compatible string thead,th1520-i2c. - Added the "power-domains" property for the Meson I2C driver. AT24 EEPROM driver changes: - add support for two new Microchip models - document even more new models in DT bindings (those use fallback compatibles so no code changes) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmaagXUACgkQFA3kzBSg KbYbXg/+Kox1Qg5LDsW9IM0YVKMbeGVCxwzNKIoL55TwW2kUOml2JZsrcTE0Ap9J SvcpcGs6kzoU8PMzQlmmPYgIU+5NZbd50CohM1TvHE7VPcduB+ydHfo61aF48obU K3biAxALkcNYG4ab5i83D04Fcfwwgmt5wU/nXvcySTRteeBOtcB+MniZ0fJWG4q1 3czYndwLgWwKa+xOaI0Y1tf5Fc8LEtyGCDQuvDtbA0/cr4RjAYVo9t8cPsKi0Ywk WEsgk7e2u74UwepmR/SQcKJ25Z70hf9k0vsyGVCPqqGNZPeCOWhiFgphU57Dm2Gm IX5CncwMT/5jYa1AoZmWmc2SkDIkk+RXq6zaOgncuDtFy78A+DHSzRSnOk5cjXX+ cNu5Er5UEzVxnJGM46C+1/60LnqIpQYyEW5goPhr91So8UPMC+PaK2eNJ+nknSxS jc2832KlWcKj0Hun7X6fbVHNGX/AKpNzwrYjOy7Rxd0G/ViaspzKSD+eukAFQuKX PX5pGcO/syzGIzXMP7aRoQ+I0TIIpTaIB9UeuCTzTSzYYmtI/yKgDp9Cbi5yPGD8 EXEVPfL3jmjxMmoYUXVPeE7qHMLm/wlrhrMvhhBKHsvzQ3MfSw9J/lcEnuKGiWYu PEKRsIdlp2qJL0tseoB/dlwWIMgW7XHT5pg4I9FoX1H1UWC89cs= =perV -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The I2C core gains documentation updates for the testunit, a cleanup regarding unneeded 'driver_data' and more sanity checks in the char device. For the host drivers, this release includes significant updates, with the primary change being the renaming from "master/slave" to "controller/target" to adhere to I2C v7 and SMBus 3.2 standards. New Support: - Added support for Intel Arrow Lake-H - Added I2C support in the Arioha SoC by linking the Mediatek I2C controller Cleanups: - Added the MODULE_DESCRIPTION() macro, resolving a modpost warning in the ALi 1563 Southbridge driver. - Constified the regmap_config declaration in the i2c-designware driver. - Improved the coding style in the Renesas R-Car driver by removing unnecessary semicolons after brackets. General improvements: - In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with RUNTIME_PM_OPS to enable waking up the controller during suspend() before suspend_noirq() kicks in. - Improved logging in the Xilinx driver. - Added a warning (WARN()) in the Renesas R-Car driver for spurious interrupts. DTS Changes: - Removed address-cell and size-cell from the Atmel at91sam, nVidia Tegra 20, and Samsung S3c2410 devices. - Fixed Texas Instruments OMAP4 I2C controller to comply with the i2c-controller.yaml schema. - Improved indentation in DTS examples for several I2C devices. - Converted the NXP LPC1788 binding to the dt-schema. - Added documentation for the compatible string thead,th1520-i2c. - Added the "power-domains" property for the Meson I2C driver. AT24 EEPROM driver changes: - add support for two new Microchip models - document even more new models in DT bindings (those use fallback compatibles so no code changes)" * tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits) i2c: document new callbacks in i2c_algorithm dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains dt-bindings: i2c: at91: Add sama7d65 compatible string i2c: st: reword according to newest specification i2c: cpm: reword according to newest specification i2c: virtio: reword according to newest specification i2c: nvidia-gpu: reword according to newest specification i2c: viai2c: reword according to newest specification i2c: viperboard: reword according to newest specification i2c: uniphier: reword according to newest specification i2c: uniphier-f: reword according to newest specification i2c: tiny-usb: reword according to newest specification i2c: thunderx-pcidrv: reword according to newest specification i2c: tegra-bpmp: reword according to newest specification i2c: taos-evm: reword according to newest specification i2c: sun6i-p2wi: reword according to newest specification i2c: stm32f4: reword according to newest specification i2c: sprd: reword according to newest specification i2c: sis5595: reword according to newest specification i2c: rzv2m: reword according to newest specification ... |
||
Linus Torvalds
|
acc5965b9f |
Char/Misc and other driver changes for 6.11-rc1
Here is the "big" set of char/misc and other driver subsystem changes for 6.11-rc1. Nothing major in here, just loads of new drivers and updates. Included in here are: - IIO api updates and new drivers added - wait_interruptable_timeout() api cleanups for some drivers - MODULE_DESCRIPTION() additions for loads of drivers - parport out-of-bounds fix - interconnect driver updates and additions - mhi driver updates and additions - w1 driver fixes - binder speedups and fixes - eeprom driver updates - coresight driver updates - counter driver update - new misc driver additions - other minor api updates All of these, EXCEPT for the final Kconfig build fix for 32bit systems, have been in linux-next for a while with no reported issues. The Kconfig fixup went in 29 hours ago, so might have missed the latest linux-next, but was acked by everyone involved. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br 1LpTASaU6A8pN81Z1m5g =6U1z -----END PGP SIGNATURE----- Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc and other driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.11-rc1. Nothing major in here, just loads of new drivers and updates. Included in here are: - IIO api updates and new drivers added - wait_interruptable_timeout() api cleanups for some drivers - MODULE_DESCRIPTION() additions for loads of drivers - parport out-of-bounds fix - interconnect driver updates and additions - mhi driver updates and additions - w1 driver fixes - binder speedups and fixes - eeprom driver updates - coresight driver updates - counter driver update - new misc driver additions - other minor api updates All of these, EXCEPT for the final Kconfig build fix for 32bit systems, have been in linux-next for a while with no reported issues. The Kconfig fixup went in 29 hours ago, so might have missed the latest linux-next, but was acked by everyone involved" * tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits) misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems misc: delete Makefile.rej binder: fix hang of unregistered readers misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI virtio: add missing MODULE_DESCRIPTION() macro agp: uninorth: add missing MODULE_DESCRIPTION() macro spmi: add missing MODULE_DESCRIPTION() macros dev/parport: fix the array out-of-bounds risk samples: configfs: add missing MODULE_DESCRIPTION() macro misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver misc: keba: Fix missing AUXILIARY_BUS dependency slimbus: Fix struct and documentation alignment in stream.c MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches misc: fastrpc: use coherent pool for untranslated Compute Banks misc: fastrpc: support complete DMA pool access to the DSP misc: fastrpc: add missing MODULE_DESCRIPTION() macro misc: fastrpc: Add missing dev_err newlines misc: fastrpc: Use memdup_user() nvmem: core: Implement force_ro sysfs attribute nvmem: Use sysfs_emit() for type attribute ... |
||
Linus Torvalds
|
b3ce7a3084 |
drm next for 6.11-rc1:
core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa, - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts, - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro. - Reduce Gaudi2 MSI-X interrupt count to 128. - Add Gaudi2-D revision support. - Add timestamp to CPLD info. - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error. - Align Gaudi2 interrupt names. - Check for errors after preboot is ready. - Change habanalabs maintainer and git repo path. mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT. - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmaYqVEACgkQDHTzWXnE hr5p3Q/+OOxTHKJ/8WMwfV1Tuep5otkCZdBgNdcuu9zqzpEMEDUDwmV1iboIvT9x qJsDwSAJomwbZAnVjDKsbZuycSHUBV6HQdf+5+rtq6be1EfFRwJVzOq0u5+D3KGt 7f2vy6sM9tw4tR6EikiuP7vCvnSz4iGrWERvEJDEtXECbALhju8sulht8ZMnr6GW /MfUetULLSDjq0L1x3TWAq2MPGnJ5UxIkIeOBUP6n4etAUX1BPTNA6N76eN/xMvn a40JhtM+pCjjkHxvloIZ+KTYN3S+hskIRksczPHh9HtNX7y/A437wyhOHJZ1NvZb yc5ke9GjXxGcxyZH+PY5aCS7O/XElzSSkR1jFZ2s3/MX7PVKgCahGK7+yWjPsiK2 R5oXebdObshUa8LHDE/3WgBUmTchkvKRTXV9cvGqzxEPhC2zrxArvwP5v6B4mhCn Vqo3Pv0Cyr+n65Z5Dzqz/9+m999LJjFTsTrug0p5b/qBJQKu2rQONe4lpZ0NFwwY ExyjdxILj7mqrQpKcA6V5Bel5ZCnlVsGfTshFL6Iux54VFlJyRMzKWZ+Gdv4av5k dbjz+re+CojKabn3ML/7pAQujK6Rqe58vPuHV78zkvAGJnQgJOOTrmYNYtn3oBqe ogdCN+/PREb/9U7i6mQv5hhdHs4tT9ROXaT9jyb8XSHXW+t9lBM= =g+Ad -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ... |
||
Vamsi Attunuru
|
5418e6dfc9 |
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency,
compilation errors arise on 32-bit ARM with writeq() & readq() calls
which are used for accessing 64-bit values.
Since DPI hardware only works with 64-bit register accesses, using
CONFIG_64BIT dependency to skip compilation on 32-bit systems.
Fixes:
|
||
Linus Torvalds
|
ce5a51bfac |
hardening updates for v6.11-rc1
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVT2IACgkQiXL039xt wCbq8A//RhxTdr+l/h2gyMy/Lcy/NMR9KEWklnxdftuM1V1Kzr53yeH/g6Ehw69g e8Ag3Sp7Fn4rNBVa+tY6RqzKwfrUHIbeewGI4LkRe19NDWFWc/Od+4tamfRSPf9c GL9ZnJZviRm3zByetwr4CbS69HocXFFSSgcpIv/7xOd+haSWWdvEc3KcSnavY/aq 8wQPkZxzy8ESkOajZj2k0E2l9JP42Ex20qy0KcjweSSYVafKmbTxhKZgriwAKMCD Yj2m55fbD6D08vd0Y6S7H4TPilYtRbulXR9FNMtw59UpKeoUceEmyn4B43psDvau 9XuJF/oFKrXBEJG+OUZogNu5L6uYUaNdYdtb43upu9lCsjrAjmMYfmXDHO2E40V8 76MikxHtyFAPEzUwg/BH2CGUu9hil+FADd28s8zLuUBpRDitgYudQD+Cqrc34b6s QlAX19bX7KFgXqlsdwy6zJNSd3dpoMBVsP58/EhQQfiqv/ZU2TOryZenz0URlH+k ZCAbpXYRAzTyGz23qkutRO+6MiKXoheE7gmd9jESiaqyXe2Q6mIMPyoFU50458TH xXhXbZc7War8vbJLyWF7fvK/GlooTHu4xOxfNTsxKWiYShI01iiwG1hH+j4ZDVOG NBBK2AfX9GM8AOHJolp5EaGmon0AoVsxbRANSs1K4qZ93WTNGLk= =LoG2 -----END PGP SIGNATURE----- Merge tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations * tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randomize_kstack: Improve stack alignment codegen ARM: Remove address checking for MMUless devices gcc-plugins: Remove duplicate included header file stringpool.h randomize_kstack: Remove non-functional per-arch entropy filtering fortify: Do not special-case 0-sized destinations x86/alternatives: Make FineIBT mode Kconfig selectable lkdtm/bugs: add test for hung smp_call_function_single() |
||
Greg Kroah-Hartman
|
ff14bfb7bc |
misc: delete Makefile.rej
I accidentally added drivers/misc/Makefile.rej when applying the
mrvl-cn10k-dpi by hand. Remove it as it's not needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes:
|
||
Vamsi Attunuru
|
a5e43e2d20 |
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
DPI hardware is an on-chip PCIe device on Marvell's arm64 SoC platforms. As Arnd suggested, CN10K belongs to ARCH_THUNDER lineage. Patch makes mrvl_cn10k_dpi driver dependent on CONFIG_ARCH_THUNDER. Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Link: https://lore.kernel.org/r/20240711120115.4069401-1-vattunuru@marvell.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Vamsi Attunuru
|
5f67eef6df |
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical function which initializes DPI DMA hardware's global configuration and enables hardware mailbox channels between physical function (PF) and it's virtual functions (VF). VF device drivers (User space drivers) use this hw mailbox to communicate any required device configuration on it's respective VF device. Accordingly, this DPI PF driver provisions the VF device resources. At the hardware level, the DPI physical function (PF) acts as a management interface to setup the VF device resources, VF devices are only provisioned to handle or control the actual DMA Engine's data transfer capabilities. Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com> Reviewed-by: Srujana Challa <schalla@marvell.com> Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Wolfram Sang
|
711703013e |
at24 updates for v6.11-rc1
- add support for two new Microchip models - document even more new models in DT bindings (those use fallback compatibles so no code changes) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaGsXsACgkQEacuoBRx 13J+UBAAm8g9oGKo1kH/t89dCY8//8D1H3QVtcbUhbT89BQbgtq/OGVgPKCsayfO 4NXidcglaoivlQ8VW/8EaMSyO6q4CrBVLLUBUbS9rG1nNOstY7q59trfkXqriqav QTPdMD4/G5lhI4Nu+6Pu10kkNxrYrQSOI2AaqI5WLQU0cv9KGs2VRjeYAwZwpbr3 dOfDJpwcmCGMywBjuT5zLh/tArzKOPXad5ICZhO9zjIg+kA5KS3+kOAed0n8Cw14 F2vP96WoxaiwhS1E5PJMm01DDgNHdptO3Yhf63rIxYFMEbASnUQyV/oh6FK+wRgK rN+F0L8+BBra0LpVYtaeHliU4k0Ab4ajmeWXoNJZXHr3XyXAiqh+wme4OavMYQyl qhq6q4lixO5eOC86yYc/Pkv8p1n6p2XF27L82KQIKHstvZcC8SyZxQmD2AfvGxsY gOxjT9RCm2a+uRY8dJdcBMHIkzWbw9az8mJEwDGVu0k08r5JGROMJsOeocyxNeT3 Dtz6GuSDvLbeSha00QJa9z3THUJx9SHHtl13P8yhGBRz6G0v8+llrjM1YbiQ6gQ8 3FtdXaoifq0RO4p53n4iAoJfzAHXriVsVFL+VVO8RE4aR3FpltmFkEPT+RfHBynZ WKCqei7pKAreb0+euaQGbYgaFggTWl54uFe8c7bvXfaU7iSulWU= =gy00 -----END PGP SIGNATURE----- Merge tag 'at24-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow at24 updates for v6.11-rc1 - add support for two new Microchip models - document even more new models in DT bindings (those use fallback compatibles so no code changes) |
||
Jiapeng Chong
|
1ae27dacae |
misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} functions
These two functions are defined in the pci_endpoint_test.c file, but not called elsewhere, so delete these unused functions. This fixes the following warning: drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'. drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'. No functional changes intended. [kwilczynski: commit log] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064 Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> |
||
Yoshihiro Shimoda
|
76084965a9 |
misc: pci_endpoint_test: Document policy about adding pci_device_id
Add a comment suggesting that if the endpoint controller Vendor and Device ID are programmable, an existing entry might be usable for testing without having to add an entry to pci_endpoint_test_tbl[]. Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> |
||
Frank Li
|
a50c7de060 |
misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logic
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit, unless the architecture has no DMA support. So no need to check for the error and also no need to set dma_set_mask_and_coherent(32) as a fallback. Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support (theoretically), then dma_set_mask_and_coherent(32) will also fail for the same reason. So the fallback doesn't make sense. Simplify the code by setting the streaming and coherent DMA mask to 48 bits. Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> |
||
Niklas Cassel
|
2a35703a6a |
misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR tests
The current code uses writel()/readl(), which has an implicit memory barrier for every single readl()/writel(). Additionally, reading 4 bytes at a time over the PCI bus is not really optimal, considering that this code is running in an ioctl handler. Use memcpy_toio()/memcpy_fromio() for BAR tests. Before patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 1.56s After patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 0.54s Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> |
||
Niklas Cassel
|
199b03db86 |
misc: pci_endpoint_test: Add support for Rockchip rk3588
Rockchip rk3588 requires 64KB alignment for BARs. While there is an existing device_id:vendor_id in the driver with 64KB alignment, that device_id:vendor_id is am654, which uses BAR2 instead of BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks in the driver to disallow BAR0. In order to allow testing all BARs, add a new rk3588 entry in the driver. We intentionally do not add the vendor id to pci_ids.h, since the policy for that file is that the vendor id has to be used by multiple drivers. Hopefully, this new entry will be short-lived, as there is a series on the mailing list which intends to move the address alignment restrictions from this driver to the endpoint side. Add a new entry for rk3588 in order to allow us to test all BARs. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |