Cowloop is a "copy-on-write" pseudo block driver. It can
be stacked on top of a "real" block driver, and catches
all write operations on their way from the file systems
layer above to the real driver below, effectively shielding
the lower driver from those write accesses. The requests are
then diverted to an ordinary file, located somewhere else
(configurable). Later read requests are checked to see whether
they can be serviced by the "real" block driver below, or
must be pulled in from the diverted location. More information
is on the project's website http://www.ATComputing.nl/cowloop/
From: "H.J. Thomassen" <hjt@ATComputing.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need to actually wait a specific ammount of time, not just hope that
a set number of loops will be long enough.
Based on a conversation with Ralink, and a proposed patch for their
older kernel driver.
Cc: david woo <xinhua_wu@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This should be a fix for the lockup bug when attaching to an access
point.
Patch came from a diff from RealTek. Hopefully it resolves the issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The built-in firmware images are never used, the firmware files
are downloaded to the device through the standard firmware interface.
This removes the firmware header file as it's not ever used.
It also removes a .h file as it is not needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes the r819xP firmware file that is never used.
The size of the built code after this patch is identical to before it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes a lot of code that is never built in to the driver.
The size of the built code after this patch is identical to before it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This removes a lot of code that is never built in to the driver.
The size of the built code after this patch is identical to before it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes -fhard-float and the software float helpers. In-kernel
floating point is not allowed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This wireless driver should work for the Realtek 8192 PCI devices.
It comes directly from Realtek and has been tested to work on at least
one laptop in the wild.
Cc: Anthony Wong <awong1@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mac80211 already does flush_workqueue() at stop/start and
suspend\resume.
(fix build error)
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For ui_DelayTime to be less than 1 and greater than 1023 is logically
impossible.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On TI DA850/OMAP-L138 EVM, HD44780 (24x2) LCD panel is being
used[1], but it is interfaced through the SoC specific LCD
interface and not through parallel port. A parallel port
driver has been developed which interfaces to the panel driver
through the SoC specific LCD interface.
Basically, both the serial and parallel interfaces supported
by the panel driver do not suit the specific interface SoC is
supporting so, a new interface type has been introduced.
Ideally the panel driver should be de-coupled from parallel
and serial port related items but this patch is something
that can be merged in the meantime.
[1]Specification of the character LCD interface on TI DA850/OMAP-L138:
http://www.ti.com/litv/pdf/sprufm0a.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't need it, we have a perfectly good set of debug tools. For this pass
keep a few debug printks around which are "should not happen" items
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have two trivial IRQ routines, a single statement and a real function -
relocate them. While we are at it kill the trivial to sort out soft reset
and slv bits in the same areas of code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We only read eeprom id 0, in byte mode - so the rest can go away
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bOverrideAddress is write only so kill it rather than fix it
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adapter was cleared by netdev allocation so any zero defaults do not need
writing.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Switch this to a Linux like naming as it occurs all over.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are all in the pcidev anyway plus are not used by the code
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Most are unused, one is used and can be replaced with the definition
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The RefCount field is accessed only by a macro and the only use of it in
the tree is to read it, so it can go
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
