1
Commit Graph

39881 Commits

Author SHA1 Message Date
Paul Mundt
af67c3a9e6 sh: update die() output.
This follows the ARM change, as SH had all of the same issues:

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 10:57:52 +09:00
H. Peter Anvin
d1705c558c x86: fix kernel panic on 32 bits when profiling
Latest kernel has a kernel panic in booting on i386 machine when
profile=2 setting in cmdline.  It is due to 'sp' being incorrect in
profile_pc().

BUG: unable to handle kernel NULL pointer dereference at 00000246
IP: [<c01288b6>] profile_pc+0x2a/0x48
*pde = 00000000
Oops: 0000 [#1] SMP

This differs from the original version by Alex Shi in that we use the
kernel_stack_pointer() inline already defined in <asm/ptrace.h> for
this purpose, instead of #ifdef.

Originally-by: Alex Shi <alex.shi@intel.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-12 11:53:51 -07:00
Nitin Gupta
787b2faadc ARM: force dcache flush if dcache_dirty bit set
On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-12 17:52:26 +01:00
Jan Beulich
7a4b7e5e74 x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop
Move the trampoline and accessors back out of .cpuinit.* for the
case of 64-bits+ACPI_SLEEP.

This solves s2ram hangs reported in:

  http://bugzilla.kernel.org/show_bug.cgi?id=14279

Reported-and-bisected-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <bugzilla-daemon@bugzilla.kernel.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 18:06:48 +02:00
David Woodhouse
9a821b2316 x86: Move pci_iommu_init to rootfs_initcall()
We want this to happen after the PCI quirks, which are now running at
the very end of the fs_initcalls.

This works around the BIOS problems which were originally addressed by
commit db8be50c43 ('USB: Work around BIOS
bugs by quiescing USB controllers earlier'), which was reverted in
commit d93a8f829f.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12 14:42:11 +01:00
Russell King
edc72786d2 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-10-12 14:38:08 +01:00
David S. Miller
1a78cedb99 sparc64: Fix D-cache flushing on swapin from SW devices.
Thanks to tip form ARM folks and Russell King.

If flush_dcache_page() occurs on a swapin it will have a mapping
and we'll try to defer the flush by setting the dirty bit.

But when it hits update_dcache_page() we won't flush because the
page won't have a mapping any more.  So remove the mapping
requirement in flush_dcache().

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 03:20:57 -07:00
Dennis O'Brien
4367216a09 [ARM] pxa: workaround errata #37 by not using half turbo switching
PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.

Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Julia Lawall
c639ef4317 [ARM] pxa/csb726: adjust duplicate structure field initialization
Currently the irq_type field of the csb726_lan_config structure is
initialized twice.  The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Yinghai Lu
15b812f1d0 pci: increase alignment to make more space for hidden code
As reported in

	http://bugzilla.kernel.org/show_bug.cgi?id=13940

on some system when acpi are enabled, acpi clears some BAR for some
devices without reason, and kernel will need to allocate devices for
them.  It then apparently hits some undocumented resource conflict,
resulting in non-working devices.

Try to increase alignment to get more safe range for unassigned devices.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11 14:43:36 -07:00
Linus Torvalds
f144c78e52 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits)
  [S390] dasd: fix race condition in resume code
  [S390] Add EX_TABLE for addressing exception in usercopy functions.
  [S390] 64-bit register support for 31-bit processes
  [S390] hibernate: Use correct place for CPU address in lowcore
  [S390] pm: ignore time spend in suspended state
  [S390] zcrypt: Improve some comments
  [S390] zcrypt: Fix sparse warning.
  [S390] perf_counter: fix vdso detection
  [S390] ftrace: drop nmi protection
  [S390] compat: fix truncate system call wrapper
  [S390] Provide arch specific mdelay implementation.
  [S390] Fix enabled udelay for short delays.
  [S390] cio: allow setting boxed devices offline
  [S390] cio: make not operational handling consistent
  [S390] cio: make disconnected handling consistent
  [S390] Fix memory leak in /proc/cio_ignore
  [S390] cio: channel path memory leak
  [S390] module: fix memory leak in s390 module loader
  [S390] Enable kmemleak on s390.
  [S390] 3270 console build fix
  ...
2009-10-11 11:34:50 -07:00
Alexey Dobriyan
d43c36dc6b headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-11 11:20:58 -07:00
Russell King
6a5e293f1b ARM: Add kmap_atomic type debugging
Seemingly this support was missed when highmem was added, so
DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 16:29:48 +01:00
Johannes Weiner
e9ac829185 ARM: boolean bit testing
Bit testing (test, testset, testclear, testchange) for bit numbers
known at compile time returns a word with the tested-for bit set.

Change it to return a true boolean value so to make it consistent with
the out-of-line path and all the other bitops implementations.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 16:25:06 +01:00
Russell King
03a6e5bd5b ARM: update die() output
Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 15:25:05 +01:00
Russell King
e40c2ec676 ARM: Dump code/mem oops lines with the appropriate log level
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 15:17:53 +01:00
Russell King
d191fe093f ARM: Dump memory and backtrace as one printk per line
dump_mem and dump_backtrace were both using multiple printk statements
to print each line.  With DEBUG_LL enabled, this causes OOPS to become
very difficult to read.  Solve this by only using one printk per line.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-11 15:03:11 +01:00
Hartley Sweeten
ebd00c08e2 ARM: 5756/1: ep93xx: introduce clk parent
The clock generation system in the ep93xx uses two external oscillator's
and two internal PLLs to derive all the internal clocks.  Many of these
internal clocks can be stopped to save power.

This introduces a "parent" hierarchy for the clocks so that the users
count can be correctly tracked for power management.

The "parent" for the video clock can either be one of the PLL outputs
or the external oscillator.  In order to correctly track the "parent"
for the video clock calc_clk_div() needed to be modified.  It now
returns an error code if the desired rate cannot be generated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10 12:45:13 +01:00
Hartley Sweeten
6531a991f9 ARM: 5754/1: ep93xx: update i2c support
Update the ep93xx i2c support:

  1) The platform init code passes the configuration data for the
     i2c-gpio driver.  This allows any gpio pin do be used for the
     sda and scl pins.  It also allows the platform to specify the
     udelay and timeout.
  2) Program the gpio configuration register to enable/disable the
     open drain drivers.  Note that this really only works if the
     sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and
     EP93XX_GPIO_LINE_EECLK.
  3) Update the edb93xx.c platform init to use the new support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10 12:45:13 +01:00
Hartley Sweeten
03d38418a5 ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines
Most of the EP93XX_GPIO_*_INT_* register defines in ep93xx-regs.h
not required due to how the ep93xx core and gpiolib support handle
gpio interrupts.  Remove the defines to prevent future confusion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-10 12:44:43 +01:00
Linus Torvalds
baf4974e49 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - print debug data when testing AUX IRQ delivery
  Input: libps2 - fix dependancy on i8042
  Input: fix rx51 board keymap
  Input: ad7879 - pass up error codes from probe functions
  Input: xpad - add BigBen Interactive XBOX 360 Controller
  Input: rotary_encoder - fix relative axis support
  Input: sparkspkr - move remove() functions to .devexit.text
  Input: wistron_btns - add DMI entry for Medion WIM2030 laptop
2009-10-09 13:32:24 -07:00
Linus Torvalds
79a6f56440 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ
  Blackfin: drop all simple-gpio board resources
  Blackfin: fix framebuffer mmap bug for nommu
  Blackfin: includecheck fix: mach-bf548, ezkit.c
  Blackfin: drop cs_change_per_word setting
  Blackfin: bf533-ezkit: convert to physmap/jedec_probe
  Blackfin: convert adv7393 resources to new i2c framework
  Blackfin: fix missed cache config renames
  Blackfin: cplbinfo: drop d_path() hacks
  Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines
  Blackfin: BF51x: add PTP MMR defines
  Blackfin: mass clean up of copyright/licensing info
  Blackfin: convert to use arch_gettimeoffset()
2009-10-09 13:31:47 -07:00
Linus Torvalds
1442138372 Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Don't allocate smaller sized mappings on every iteration
  sh: Try PMB mapping based on physical address, not mapping size
  sh: Plug PMB alloc memory leak
  sh: Sprinkle __uses_jump_to_uncached
  sh: enable sleep state LEDs on Ecovec24
  usb: r8a66597-udc unaligned fifo fix
  sh: mach-ecovec24: Document DS2 switch settings.
  sh: Build fix: export __movmem
  sh: Disable unaligned kernel access printks by default.
  sh: mach-ecovec24: modify 1st MTD area to read only
  sh: mach-ecovec24: Add TouchScreen support
  sh: magicpanelr2 and dreamcast can use the generic I/O base.
  sh: Don't enable interrupts in the page fault path
  sh: Set the default I/O port base to P2SEG.
  sh: Handle ioport_map() cases for >= P1SEG addresses.
2009-10-09 09:34:52 -07:00
Ingo Molnar
e7ab0f7b50 Revert "x86, timers: Check for pending timers after (device) interrupts"
This reverts commit 9bcbdd9c58.

The real bug producing LatencyTop latencies has been fixed in:

  f5dc375: sched: Update the clock of runqueue select_task_rq() selected

And the commit being reverted here triggers local timer processing
from every device IRQ. If device IRQs come in at a high frequency,
this could cause a performance regression.

The commit being reverted here purely 'fixed' the reported latency
as a side effect, because CPUs were being moved out of idle more
often.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-09 15:58:20 +02:00
David S. Miller
de23cf3c42 sparc64: Fix niagara2 perf IRQ bits.
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09 00:42:40 -07:00
Matt Fleming
a2767cfb1d sh: Don't allocate smaller sized mappings on every iteration
Currently, we've got the less than ideal situation where if we need to
allocate a 256MB mapping we'll allocate four entries like so,

	 entry 1: 128MB
	 entry 2:  64MB
	 entry 3:  16MB
	 entry 4:  16MB

This is because as we execute the loop in pmb_remap() we will
progressively try mapping the remaining address space with smaller and
smaller sizes. This isn't good because the size we use on one iteration
may be the perfect size to use on the next iteration, for instance when
the initial size is divisible by one of the PMB mapping sizes.

With this patch, we now only need two entries in the PMB to map 256MB of
address space,

	  entry 1: 128MB
	  entry 2: 128MB

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:26:35 +09:00
Matt Fleming
2bea7ea7d5 sh: Try PMB mapping based on physical address, not mapping size
We should favour PMB mappings when the physical address cannot be
reached with 29-bits.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:25:10 +09:00
Matt Fleming
fc2bdefdde sh: Plug PMB alloc memory leak
If we fail to allocate a PMB entry in pmb_remap() we must remember to
clear and free any PMB entries that we may have previously allocated,
e.g. if we were allocating a multiple entry mapping.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:24:09 +09:00
Matt Fleming
a6325247f5 sh: Sprinkle __uses_jump_to_uncached
Fix some callers of jump_to_uncached() and back_to_cached() that were
not annotated with __uses_jump_to_uncached.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:23:57 +09:00
Magnus Damm
f78bab3070 sh: enable sleep state LEDs on Ecovec24
Extend the ecovec24 board code to enable Power
Management LEDs showing the current sh7724 sleep state.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09 11:14:21 +09:00
Alok Kataria
d0153ca35d x86, vmi: Mark VMI deprecated and schedule it for removal
Add text in feature-removal.txt indicating that VMI will be removed in
the 2.6.37 timeframe.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
LKML-Reference: <1254193238.13456.48.camel@ank32.eng.vmware.com>
[ removed a bogus Kconfig change, marked (DEPRECATED) in Kconfig ]
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 22:27:55 +02:00
Linus Torvalds
624235c5b3 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pci: Correct spelling in a comment
  x86: Simplify bound checks in the MTRR code
  x86: EDAC: carve out AMD MCE decoding logic
  initcalls: Add early_initcall() for modules
  x86: EDAC: MCE: Fix MCE decoding callback logic
2009-10-08 12:06:36 -07:00
Linus Torvalds
b924f9599d Merge branch 'sparc-perf-events-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sparc-perf-events-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mm, perf_event: Make vmalloc_user() align base kernel virtual address to SHMLBA
  perf_event: Provide vmalloc() based mmap() backing
2009-10-08 12:05:50 -07:00
Linus Torvalds
7c1632ba76 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, timers: Check for pending timers after (device) interrupts
  NOHZ: update idle state also when NOHZ is inactive
2009-10-08 12:04:04 -07:00
Linus Torvalds
d8e7b2b3ac Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omapfb: Blizzard: constify register address tables
  omapfb: Blizzard: fix pointer to be const
  omapfb: Condition mutex acquisition
  omap: iovmm: Add missing mutex_unlock
  omap: iovmm: Fix incorrect spelling
  omap: SRAM: flush the right address after memcpy in omap_sram_push
  omap: Lock DPLL5 at boot
  omap: Fix incorrect 730 vs 850 detection
  OMAP3: PM: introduce a new powerdomain walk helper
  OMAP3: PM: Enable GPIO module-level wakeups
  OMAP3: PM: USBHOST: clear wakeup events on both hosts
  OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
  OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
  OMAP3: PM: Prevent hang in prcm_interrupt_handler
2009-10-08 12:01:01 -07:00
Arjan van de Ven
9bcbdd9c58 x86, timers: Check for pending timers after (device) interrupts
Now that range timers and deferred timers are common, I found a
problem with these using the "perf timechart" tool. Frans Pop also
reported high scheduler latencies via LatencyTop, when using
iwlagn.

It turns out that on x86, these two 'opportunistic' timers only get
checked when another "real" timer happens. These opportunistic
timers have the objective to save power by hitchhiking on other
wakeups, as to avoid CPU wakeups by themselves as much as possible.

The change in this patch runs this check not only at timer
interrupts, but at all (device) interrupts. The effect is that:

 1) the deferred timers/range timers get delayed less

 2) the range timers cause less wakeups by themselves because
    the percentage of hitchhiking on existing wakeup events goes up.

I've verified the working of the patch using "perf timechart", the
original exposed bug is gone with this patch. Frans also reported
success - the latencies are now down in the expected ~10 msec
range.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Frans Pop <elendil@planet.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091008064041.67219b13@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08 17:27:27 +02:00
Linus Torvalds
385c51d6b1 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  agp: parisc-agp.c - use correct page_mask function
  parisc: Fix linker script breakage.
  parisc: convert to asm-generic/hardirq.h
  parisc: Make THREAD_SIZE available to assembly files and linker scripts.
  parisc: correct use of SHF_ALLOC
  parisc: rename parisc's vmalloc_start to parisc_vmalloc_start
  parisc: add me to Maintainers
  parisc: includecheck fix: signal.c
  parisc: HAVE_ARCH_TRACEHOOK
  parisc: add skeleton syscall.h
  parisc: stop using task->ptrace for {single,block}step flags
  parisc: split syscall_trace into two halves
  parisc: add missing TI_TASK macro in syscall.S
  parisc: tracehook_signal_handler
  parisc: tracehook_report_syscall
2009-10-08 07:40:19 -07:00
Michael Hennerich
796dada9f5 Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ
Blackfin already sets proper flow handlers on all IRQs, and we don't rely
on __do_IRQ, therefore we can simply select GENERIC_HARDIRQS_NO__DO_IRQ.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:20 -04:00
Mike Frysinger
282246dae8 Blackfin: drop all simple-gpio board resources
The simple-gpio has been replaced by the gpio sysfs interface, so drop the
unused simple-gpio resources from all Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:18 -04:00
Thomas Chou
59bd00c850 Blackfin: fix framebuffer mmap bug for nommu
The patch added a special get_unmapped_area for framebuffer which
was hooked to the file ops in drivers/video/fbmem.c.

This is needed since v2.6.29-rc1 where nommu vma management was
updated, and mmap of framebuffer caused kernel BUG panic. You may turn
on "Debug the global anon/private NOMMU mapping region tree" config to
such message.

As Documentation/nommu-mmap.txt said,
"To provide shareable character device support, a driver must provide
a file->f_op->get_unmapped_area() operation. The mmap() routines will
call this to get a proposed address for the mapping."

With this change, user space should call mmap for framebuffer using
shared map. Or it can try shared map first, then private map if
failed. This shared map usage is now consistent between mmu and nommu.

The sys_ file may not be a good place for this patch. But there is a
similar one for sparc. I tested a similar patch on nios2nommu, though
I don't have a blackfin board to test.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:15 -04:00
Jaswinder Singh Rajput
4a7bcb4fe9 Blackfin: includecheck fix: mach-bf548, ezkit.c
Fix the following 'make includecheck' warning:

  arch/blackfin/mach-bf548/boards/ezkit.c: linux/input.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:13 -04:00
Mike Frysinger
5a2b0d7315 Blackfin: drop cs_change_per_word setting
Structs get initialized to 0 already, and we want to punt this field, so
scrub it from all of our boards.

Reported-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:11 -04:00
Mike Frysinger
7036c61fe0 Blackfin: bf533-ezkit: convert to physmap/jedec_probe
Now that the common jedec_probe supports the ST PSD4256G6V, no need to
use the custom stm_flash driver.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:07 -04:00
Michael Hennerich
50c4c0861a Blackfin: convert adv7393 resources to new i2c framework
Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:57:54 -04:00
Hartley Sweeten
591006f830 ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros
Change the #define's for the EP93XX_*_PHYS_BASE addresses to use
macros for easier readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:16:07 +01:00
Hubert Feurstein
7232344d49 ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim
Add Contec Micro9-Slim support

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5750/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:15:15 +01:00
Hubert Feurstein
14636005ff ARM: 5750/1: ep93xx/micro9: Update platform code
Update Contec Micro9 platform code

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5749/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:15:15 +01:00
Hubert Feurstein
9415009544 ARM: 5749/1: ep93xx/micro9: Update maintainer
Update Contec Micro9 maintainer and add entry in MAINTAINERS

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5744/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Manfred Gruber <m.gruber@tirol.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:15:14 +01:00
Dmitry Artamonow
4918a01393 ARM: 5752/1: SA1100: fix building of h3100
Both iPaqs h3100 and h3600 currently share the same source
file - h3600.c  But Makefile builds it only if CONFIG_SA1100_H3600
selected, so selecting just CONFIG_SA1100_H3100 results in
"no machine record defined" message and aborted compilation.

Fix it.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:13:01 +01:00
Leo Chen
b623438341 ARM: 5748/1: bcmring: fix build warning messages
Fix the warning messages during kernel build for bcmring.

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:13:01 +01:00
Catalin Marinas
3257f43d92 ARM: 5747/1: Fix the start_pg value in free_memmap()
If sparsemem is enabled, the start_pfn passed to the free_memmap()
function corresponds to an area of memory not known to the kernel and
pfn_to_page returns a wrong value. The (start_pfn - 1), however, is
known to the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:13:00 +01:00
Catalin Marinas
32cfb1b16f ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
This is needed because applications using the sys_cacheflush system call
can pass a memory range which isn't mapped yet even though the
corresponding vma is valid. The patch also adds unwinding annotations
for correct backtraces from the coherent_user_range() functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:12:59 +01:00
Hartley Sweeten
cc1ad4a696 ARM: 5745/1: Change ep93xx gpio_irq static inlines to macros
From: Ryan Mallon <ryan@bluewatersys.com>

Change the gpio_to_irq and irq_to_gpio static inline functions to
macros so that they can be used in variable initialisers.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:12:58 +01:00
Hartley Sweeten
1f8db4fc12 ARM: 5744/1: ep93xx: add remaining phys offset selections
This adds the missing Kconfig options for the first SDRAM bank address
on ep93xx boards.

Cc: Hubert Feurstein <(address hidden)>
Signed-off-by: H Hartley Sweeten <(address hidden)>
Acked-by: Ryan Mallon <(address hidden)>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 13:11:56 +01:00
Graf Yang
19a3b6034a Blackfin: fix missed cache config renames
Looks like the big Kconfig cache split/rename missed one spot in the SMP
cache lock headers.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:08 -04:00
Mike Frysinger
48dee09325 Blackfin: cplbinfo: drop d_path() hacks
The cplbinfo was using d_path() to figure out which cpu/cplb was being
parsed.  As Al pointed out, this isn't exactly reliable as it assumes the
static VFS path to be unchanged, and it's just poor form.  So use the
proc_create_data() to properly (and internally) pass the exact cpu/cplb
requested to the parser function.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:04 -04:00
Mike Frysinger
d586e833f9 Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines
The asm/irq.h header uses anomaly defines, but doesn't make sure to
explicitly include the anomaly header for them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:48:01 -04:00
Barry Song
6206f709d9 Blackfin: BF51x: add PTP MMR defines 2009-10-07 04:47:57 -04:00
Robin Getz
96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
john stultz
10f03f1a24 Blackfin: convert to use arch_gettimeoffset()
Convert Blackfin to use GENERIC_TIME via the arch_getoffset()
infrastructure, reducing the amount of arch specific code we need to
maintain.

I've taken my best swing at converting this, but I'm not 100% confident
I got it right.  My cross-compiler is now out of date (gcc4.2) so I
wasn't able to check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:20 -04:00
Tony Lindgren
ab8d64d7d4 Merge branch 'pm-fixes-32' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-fixes-for-linus 2009-10-06 08:32:28 -07:00
Daniel Walker
265489003c omap: iovmm: Add missing mutex_unlock
I was using Coccinelle with the mutex_unlock semantic patch, and it
unconvered this problem. It appears to be a valid missing unlock issue.
This change should correct it by moving the unlock below the label.

This patch is against the mainline kernel.

Cc: Julia Lawall <julia@diku.dk>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-06 08:31:50 -07:00
Hiroshi DOYU
ba6a117944 omap: iovmm: Fix incorrect spelling
Fix incorrect spelling

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-06 08:31:50 -07:00
ye janboe
913b143ffa omap: SRAM: flush the right address after memcpy in omap_sram_push
the original flush operation is to flush the function address which is
copied from.
But we do not change the function code and it is not necessary to flush it.

Signed-off-by: janboe <janboe.ye@gmail.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-06 08:31:50 -07:00
Peter Zijlstra
906010b213 perf_event: Provide vmalloc() based mmap() backing
Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.

These architectures typically have to use vmalloc_user() for this.

However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-06 14:21:50 +02:00
Gerald Schaefer
af9d2ff9af [S390] Add EX_TABLE for addressing exception in usercopy functions.
This patch adds an EX_TABLE entry to mvc{p|s|os} usercopy functions that
may be called with KERNEL_DS. In combination with collaborative memory
management, kernel pages marked as unused may trigger an adressing exception
in the usercopy functions. This fixes an unhandled addressing exception bug
where strncpy_from_user() is used with len > strnlen and KERNEL_DS, crossing
a page boundary to an unused page.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:10 +02:00
Heiko Carstens
ea2a4d3a3a [S390] 64-bit register support for 31-bit processes
From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:10 +02:00
Michael Holzheu
dd43bfca43 [S390] hibernate: Use correct place for CPU address in lowcore
We used address 0x1084 instead of 0x84 to store the suspend CPU address.
With this patch we use the correct address 0x84 as it is defined in
the POP.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:10 +02:00
Martin Schwidefsky
623c08e4cb [S390] pm: ignore time spend in suspended state
The time a system has been suspended should not show up in any
of the cputime accounting fields. The time of inactivity is definitly
not any form of real cputime nor is it idle time.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:09 +02:00
Heiko Carstens
930e44fbea [S390] perf_counter: fix vdso detection
s390 version of f2053f1a "powerpc/perf_counter: Fix vdso detection".

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:09 +02:00
Heiko Carstens
22ceaf408f [S390] ftrace: drop nmi protection
The function graph tracer used to have a protection against NMI
while entering a function entry tracing. But this is useless now,
the tracer is reentrant and the ring buffer supports NMI tracing.

Same as 07868b086c for x86.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:08 +02:00
Heiko Carstens
593c4f7398 [S390] compat: fix truncate system call wrapper
The system call takes a signed length parameter. So perform sign
extension instead of zero extension.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:08 +02:00
Heiko Carstens
0cd6a403e8 [S390] Provide arch specific mdelay implementation.
Use an own implementation instead of the common code udelay loop.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:08 +02:00
Christian Borntraeger
78d81f2f84 [S390] Fix enabled udelay for short delays.
When udelay() gets called with a delay that would expire before the
next clock event it reprograms the clock comparator.
When the interrupt happens the clock comparator won't be resetted
therefore the interrupt condition doesn't get cleared.
The result is an endless timer interrupt loop until the next clock
event would expire (stored in lowcore).
So udelay() usually would wait much longer for small delays than it
should.

Fix this by disabling the local tick which makes sure that the clock
comparator will be resetted when a timer interrupt happens.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:08 +02:00
Christian Borntraeger
6a03f5f0a0 [S390] module: fix memory leak in s390 module loader
The s390 version of module_frob_arch_sections allocates additional
syminfos for got and plt offsets. These syminfos are freed on
sucessful module load. If the module fails to load (e.g. missing
dependency when using insmod instead of modprobe) this area is not
freed.
This patch lets module_free free this area. Please note, we have to
set the pointer to NULL since module_free is called several times
from the generic code.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:06 +02:00
Heiko Carstens
dfcc3e6a8b [S390] Enable kmemleak on s390.
Also increase the maximum possible kmemleak early log entries since
2000 are not sufficient on s390.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:06 +02:00
Martin Schwidefsky
52a21f2cee [S390] fix build breakage with CONFIG_AIO=n
next-20090925 randconfig build breaks on s390x, with CONFIG_AIO=n.

arch/s390/mm/pgtable.c: In function 's390_enable_sie':
arch/s390/mm/pgtable.c:282: error: 'struct mm_struct' has no member named 'ioctx_list'
arch/s390/mm/pgtable.c:298: error: 'struct mm_struct' has no member named 'ioctx_list'
make[1]: *** [arch/s390/mm/pgtable.o] Error 1

Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-06 10:35:05 +02:00
Amit Kucheria
acf442dc56 Input: fix rx51 board keymap
The original driver was written with the KEY() macro defined as (col,
row) instead of (row, col) as defined by the matrix keypad
infrastructure. So the keymap was defined accordingly. Since the
driver that was merged upstream uses the matrix keypad infrastructure,
modify the keymap accordingly.

While we are at it, fix the comments in twl4030.h and define
PERSISTENT_KEY as (r,c) instead of (c, r)

Tested on a RX51 (N900) device.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-05 22:00:39 -07:00
Rajendra Nayak
7a66a39b85 omap: Lock DPLL5 at boot
Lock DPLL5 at 120MHz at boot. The USBHOST 120MHz f-clock and
USBTLL f-clock are the only users of this DPLL, and 120MHz is
is the only recommended rate for these clocks.

With this patch, the 60 MHz ULPI clock is generated correctly.

Tested on an OMAP3430 SDP.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-05 13:31:44 -07:00
Tony Lindgren
a9f82d10d1 omap: Fix incorrect 730 vs 850 detection
Commit cd92204924 added
support for omap850. However, the patch accidentally
removed the wrong ifdef:

 #  define cpu_is_omap730()		1
 # endif
 #endif
+#else
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap850
+#  define cpu_is_omap850()		1
+# endif
+#endif

...

 void omap2_check_revision(void);

 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-
-#endif

Instead of removing removing the #endif at the end of the file,
the #endif before #else should have been removed.

But we cannot have multiple #else statements as pointed out by
Alistair Buxton <a.j.buxton@gmail.com>. So the fix is to:

- remove the non-multi-omap special handling, as we need to
  detect between omap730 and omap850 anyways.

- add the missing #endif back to the end of the file

Reported-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-05 13:31:43 -07:00
Linus Torvalds
19d031e052 Merge branch 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: add support for change_pte mmu notifiers
  KVM: MMU: add SPTE_HOST_WRITEABLE flag to the shadow ptes
  KVM: MMU: dont hold pagecount reference for mapped sptes pages
  KVM: Prevent overflow in KVM_GET_SUPPORTED_CPUID
  KVM: VMX: flush TLB with INVEPT on cpu migration
  KVM: fix LAPIC timer period overflow
  KVM: s390: fix memsize >= 4G
  KVM: SVM: Handle tsc in svm_get_msr/svm_set_msr correctly
  KVM: SVM: Fix tsc offset adjustment when running nested
2009-10-05 12:07:39 -07:00
Linus Torvalds
e8d809c613 Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Clear sticky FSR register after saving it to func parametr
  microblaze: UMS is used only for MMU kernel
2009-10-05 12:06:59 -07:00
Linus Torvalds
ef790fe022 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: using HZ needs an include of linux/param.h
  sparc32: convert to asm-generic/hardirq.h
  sparc64: Cache per-cpu %pcr register value in perf code.
  sparc64: Fix comment typo in perf_event.c
  sparc64: Minor coding style fixups in perf code.
  sparc64: Add a basic conflict engine in preparation for multi-counter support.
  sparc64: Increase vmalloc size to fix percpu regressions.
  sparc64: Add initial perf event conflict resolution and checks.
  sparc: Niagara1 perf event support.
  sparc: Add Niagara2 HW cache event support.
  sparc: Support all ultra3 and ultra4 derivatives.
  sparc: Support HW cache events.
2009-10-05 12:06:40 -07:00
Linus Torvalds
46302b46e5 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Don't leak 64-bit kernel register values to 32-bit processes
  x86, SLUB: Remove unused CONFIG FAST_CMPXCHG_LOCAL
  x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg
  x86: Don't generate cmpxchg8b_emu if CONFIG_X86_CMPXCHG64=y
  x86: Fix csum_ipv6_magic asm memory clobber
  x86: Optimize cmpxchg64() at build-time some more
2009-10-05 12:02:18 -07:00
Linus Torvalds
5b1755f23b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix rename of pt_regs offset defines breakage
  m68knommu: remove duplicated #include
  m68knommu: show KiB rather than pages in "Freeing initrd memory:" message
2009-10-05 11:56:55 -07:00
Artem Bityutskiy
ee894b18e0 OMAP3: PM: introduce a new powerdomain walk helper
The 'pwrdm_for_each()' function walks powerdomains with a spinlock
locked, so the the callbacks cannot do anything which may sleep.
This patch introduces a 'pwrdm_for_each_nolock()' helper which does
the same, but without the spinlock locked. This fixes the following
lockdep warning:

[    0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec()
[    0.000000] Modules linked in:
(unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60)
(warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec)
(lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0)
(kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4)
(d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118)
(__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94)
(lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c)
(debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20)
(debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90)
(pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80)
(pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c)
(pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8)
(do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c)
(kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8)

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:51:00 -07:00
Kevin Hilman
eb350f74eb OMAP3: PM: Enable GPIO module-level wakeups
Currently, only GPIOs in the wakeup domain (GPIOs in bank 0) are
enabled as wakups.  This patch also enables GPIOs in the PER
powerdomain (banks 2-6) to be used as possible wakeup sources.

In addition, this patch ensures that all GPIO wakeups can wakeup
the MPU using the PM_MPUGRPSEL_<pwrdm> registers.

NOTE: this doesn't enable the individual GPIOs as wakeups, this simply
enables the per-bank wakeups at the powerdomain level.

This problem was discovered by Mike Chan when preventing the CORE
powerdomain from going into retention/off.  When CORE was allowed to
hit retention, GPIO wakeups via IO pad were working fine, but when
CORE remained on, GPIO module-level wakeups were not working properly.

To test, prevent CORE from going inactive/retention/off, thus
preventing the IO chain from being armed:

  # echo 3 > /debug/pm_debug/core_pwrdm/suspend

This ensures that GPIO wakeups happen via module-level wakeups and
not via IO pad.

Tested on 3430SDP using the touchscreen GPIO (gpio 2, in WKUP)
Tested on Zoom2 using the QUART interrup GPIO  (gpio 102, in PER)

Also, c.f. OMAP PM wiki for troubleshooting GPIO wakeup issues:
http://elinux.org/OMAP_Power_Management

Reported-by: Mike Chan <mikechan@google.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:51:00 -07:00
Vikram Pandita
71a8077573 OMAP3: PM: USBHOST: clear wakeup events on both hosts
USBHOST module has 2 fclocks (for HOST1 and HOST2), only one iclock
and only a single bit in the WKST register to indicate a wakeup event.

Because of the single WKST bit, we cannot know whether a wakeup event
was on HOST1 or HOST2, so enable both fclocks before clearing the
wakeup event to ensure both hosts can properly clear the event.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:51:00 -07:00
Paul Walmsley
8cb0ac999f OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
Clearing wakeup sources is now only done when the PRM indicates a
wakeup source interrupt.  Since we don't handle any other types of
PRCM interrupts right now, warn if we get any other type of PRCM
interrupt.  Either code needs to be added to the PRCM interrupt
handler to react to these, or these other interrupts should be masked
off at init.

Updated after Jon Hunter's PRCM IRQ rework by Kevin Hilman.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:51:00 -07:00
Paul Walmsley
5d80597801 OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
PM_WKST register contents should be ANDed with the contents of the
MPUGRPSEL registers.  Otherwise the MPU PRCM interrupt handler could
wind up clearing wakeup events meant for the IVA PRCM interrupt
handler. A future revision to this code should be to read a cached
version of MPUGRPSEL from the powerdomain code, since PRM reads are
relatively slow.

Updated after Jon Hunter's PRCM IRQ change by Kevin Hilman

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:50:59 -07:00
Jon Hunter
77da2d910a OMAP3: PM: Prevent hang in prcm_interrupt_handler
There are two scenarios where a race condition could result in a hang
in the prcm_interrupt handler. These are:

1). Waiting for PRM_IRQSTATUS_MPU register to clear.
Bit 0 of the PRM_IRQSTATUS_MPU register indicates that a wake-up event
is pending for the MPU. This bit can only be cleared if the all the
wake-up events latched in the various PM_WKST_x registers have been
cleared. If a wake-up event occurred during the processing of the prcm
interrupt handler, after the corresponding PM_WKST_x register was
checked but before the PRM_IRQSTATUS_MPU was cleared, then the CPU
would be stuck forever waiting for bit 0 in PRM_IRQSTATUS_MPU to be
cleared.

2). Waiting for the PM_WKST_x register to clear.
Some power domains have more than one wake-up source. The PM_WKST_x
registers indicate the source of a wake-up event and need to be cleared
after a wake-up event occurs. When the PM_WKST_x registers are read and
before they are cleared, it is possible that another wake-up event
could occur causing another bit to be set in one of the PM_WKST_x
registers. If this did occur after reading a PM_WKST_x register then
the CPU would miss this event and get stuck forever in a loop waiting
for that PM_WKST_x register to clear.

This patch address the above race conditions that would result in a
hang.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-05 10:50:59 -07:00
Imre Deak
1d2127123d ARM: 5742/1: ARM: add debug check for invalid kernel page faults
According to the following in arch/arm/mm/fault.c page faults from
kernel mode are invalid if mmap_sem is already held and there is
no exception handler defined for the faulting instruction:

/*
 * As per x86, we may deadlock here.  However, since the kernel only
 * validly references user space from well defined areas of the code,
 * we can bug out early if this is from code which shouldn't.
 */
if (!down_read_trylock(&mm->mmap_sem)) {
	if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
		goto no_context;

Since mmap_sem can be held at arbitrary times by another thread this
also means that any page faults from kernel mode are invalid if no
exception handler is defined for them, regardless whether mmap_sem is
held at the time of fault.

To easier detect code that can trigger the above error, add a check
also for the case where mmap_sem is acquired. As this has an overhead
make it a VM debug check.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-05 17:55:55 +01:00
Michal Simek
131e4e97bf microblaze: Clear sticky FSR register after saving it to func parametr
Previous patch d63678d607d0e37ec7abe5ceb545d7e8aab956a4 clear
it for noMMU kernel. This one do it for MMU.

Correct noMMU version

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05 11:37:47 +02:00
Michal Simek
f1ae3f6918 microblaze: UMS is used only for MMU kernel
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-10-05 11:37:47 +02:00
Stephen Rothwell
c4a57435db sparc: using HZ needs an include of linux/param.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05 00:46:08 -07:00
Kuninori Morimoto
9c472c4dd8 sh: mach-ecovec24: Document DS2 switch settings.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-05 10:59:22 +09:00
Izik Eidus
3da0dd433d KVM: add support for change_pte mmu notifiers
this is needed for kvm if it want ksm to directly map pages into its
shadow page tables.

[marcelo: cast pfn assignment to u64]

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-10-04 17:04:53 +02:00
Izik Eidus
1403283acc KVM: MMU: add SPTE_HOST_WRITEABLE flag to the shadow ptes
this flag notify that the host physical page we are pointing to from
the spte is write protected, and therefore we cant change its access
to be write unless we run get_user_pages(write = 1).

(this is needed for change_pte support in kvm)

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-10-04 17:04:50 +02:00
Izik Eidus
acb66dd051 KVM: MMU: dont hold pagecount reference for mapped sptes pages
When using mmu notifiers, we are allowed to remove the page count
reference tooken by get_user_pages to a specific page that is mapped
inside the shadow page tables.

This is needed so we can balance the pagecount against mapcount
checking.

(Right now kvm increase the pagecount and does not increase the
mapcount when mapping page into shadow page table entry,
so when comparing pagecount against mapcount, you have no
reliable result.)

Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-10-04 17:04:48 +02:00
Avi Kivity
6a54435560 KVM: Prevent overflow in KVM_GET_SUPPORTED_CPUID
The number of entries is multiplied by the entry size, which can
overflow on 32-bit hosts.  Bound the entry count instead.

Reported-by: David Wagner <daw@cs.berkeley.edu>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-10-04 17:04:16 +02:00