d129377639
179 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dave Jiang
|
debdce20c4 |
cxl/region: Deal with numa nodes not enumerated by SRAT
For the numa nodes that are not created by SRAT, no memory_target is allocated and is not managed by the HMAT_REPORTING code. Therefore hmat_callback() memory hotplug notifier will exit early on those NUMA nodes. The CXL memory hotplug notifier will need to call node_set_perf_attrs() directly in order to setup the access sysfs attributes. In acpi_numa_init(), the last proximity domain (pxm) id created by SRAT is stored. Add a helper function acpi_node_backed_by_real_pxm() in order to check if a NUMA node id is defined by SRAT or created by CFMWS. node_set_perf_attrs() symbol is exported to allow update of perf attribs for a node. The sysfs path of /sys/devices/system/node/nodeX/access0/initiators/* is created by node_set_perf_attrs() for the various attributes where nodeX is matched to the NUMA node of the CXL region. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240308220055.2172956-13-dave.jiang@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dave Jiang
|
11270e5262 |
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
Both generic node and HMAT handling code have been using magic numbers to indicate access classes for 'struct access_coordinate'. Introduce enums to enumerate the access0 and access1 classes shared by the two subsystems. Update the function parameters and callers as appropriate to utilize the new enum. Access0 is named to ACCESS_COORDINATE_LOCAL in order to indicate that the access class is for 'struct access_coordinate' between a target node and the nearest initiator node. Access1 is named to ACCESS_COORDINATE_CPU in order to indicate that the access class is for 'struct access_coordinate' between a target node and the nearest CPU node. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240308220055.2172956-3-dave.jiang@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
db5ccb9eb2 |
cxl for v6.8
- Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZaHVvAAKCRDfioYZHlFs Z3sCAQDPHSsHmj845k4lvKbWjys3eh78MKKEFyTXLQgYhOlsGAEAigQY2ZiSum52 nwdIgpOOADNt0Iq6yXuLsmn9xvY9bAU= =HjCl -----END PGP SIGNATURE----- Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) updates from Dan Williams: "The bulk of this update is support for enumerating the performance capabilities of CXL memory targets and connecting that to a platform CXL memory QoS class. Some follow-on work remains to hook up this data into core-mm policy, but that is saved for v6.9. The next significant update is unifying how CXL event records (things like background scrub errors) are processed between so called "firmware first" and native error record retrieval. The CXL driver handler that processes the record retrieved from the device mailbox is now the handler for that same record format coming from an EFI/ACPI notification source. This also contains miscellaneous feature updates, like Get Timestamp, and other fixups. Summary: - Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups" * tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits) cxl/core: use sysfs_emit() for attr's _show() cxl/pci: Register for and process CPER events PCI: Introduce cleanup helpers for device reference counts and locks acpi/ghes: Process CXL Component Events cxl/events: Create a CXL event union cxl/events: Separate UUID from event structures cxl/events: Remove passing a UUID to known event traces cxl/events: Create common event UUID defines cxl/events: Promote CXL event structures to a core header cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe() cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge() cxl: Fix device reference leak in cxl_port_perf_data_calculate() cxl: Convert find_cxl_root() to return a 'struct cxl_root *' cxl: Introduce put_cxl_root() helper cxl/port: Fix missing target list lock cxl/port: Fix decoder initialization when nr_targets > interleave_ways cxl/region: fix x9 interleave typo cxl/trace: Pass UUID explicitly to event traces cxl/region: use %pap format to print resource_size_t cxl/region: Add dev_dbg() detail on failure to allocate HPA space ... |
||
|
Dave Jiang
|
6a954e94d0 |
base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates'
Dan Williams suggested changing the struct 'node_hmem_attrs' to 'access_coordinates' [1]. The struct is a container of r/w-latency and r/w-bandwidth numbers. Moving forward, this container will also be used by CXL to store the performance characteristics of each link hop in the PCIE/CXL topology. So, where node_hmem_attrs is just the access parameters of a memory-node, access_coordinates applies more broadly to hardware topology characteristics. The observation is that seemed like an exercise in having the application identify "where" it falls on a spectrum of bandwidth and latency needs. For the tuple of read/write-latency and read/write-bandwidth, "coordinates" is not a perfect fit. Sometimes it is just conveying values in isolation and not a "location" relative to other performance points, but in the end this data is used to identify the performance operation point of a given memory-node. [2] Link: http://lore.kernel.org/r/64471313421f7_1b66294d5@dwillia2-xfh.jf.intel.com.notmuch/ Link: https://lore.kernel.org/linux-cxl/645e6215ee0de_1e6f2945e@dwillia2-xfh.jf.intel.com.notmuch/ Suggested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/170319615734.2212653.15319394025985499185.stgit@djiang5-mobl3 Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Greg Kroah-Hartman
|
580fc9c750 |
driver core: mark remaining local bus_type variables as const
Now that the driver core can properly handle constant struct bus_type, change the local driver core bus_type variables to be a constant structure as well, placing them into read-only memory which can not be modified at runtime. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Kevin Hilman <khilman@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Len Brown <len.brown@intel.com> Acked-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/2023121908-paver-follow-cc21@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Gregory Price
|
48b5928e18 |
base/node.c: initialize the accessor list before registering
The current code registers the node as available in the node array
before initializing the accessor list. This makes it so that
anything which might access the accessor list as a result of
allocations will cause an undefined memory access.
In one example, an extension to access hmat data during interleave
caused this undefined access as a result of a bulk allocation
that occurs during node initialization but before the accessor
list is initialized.
Initialize the accessor list before making the node generally
available to the global system.
Fixes:
|
||
|
Linus Torvalds
|
28a4f91f5f |
Driver core changes for 6.6-rc1
Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH77Q8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylZMACePk8SitfaJc6FfFf5I7YK7Nq0V8MAn0nUjgsR i8NcNpu/Yv4HGrDgTdh/ =PJbk -----END PGP SIGNATURE----- Merge tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is a small set of driver core updates and additions for 6.6-rc1. Included in here are: - stable kernel documentation updates - class structure const work from Ivan on various subsystems - kernfs tweaks - driver core tests! - kobject sanity cleanups - kobject structure reordering to save space - driver core error code handling fixups - other minor driver core cleanups All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) driver core: Call in reversed order in device_platform_notify_remove() driver core: Return proper error code when dev_set_name() fails kobject: Remove redundant checks for whether ktype is NULL kobject: Add sanity check for kset->kobj.ktype in kset_register() drivers: base: test: Add missing MODULE_* macros to root device tests drivers: base: test: Add missing MODULE_* macros for platform devices tests drivers: base: Free devm resources when unregistering a device drivers: base: Add basic devm tests for platform devices drivers: base: Add basic devm tests for root devices kernfs: fix missing kernfs_iattr_rwsem locking docs: stable-kernel-rules: mention that regressions must be prevented docs: stable-kernel-rules: fine-tune various details docs: stable-kernel-rules: make the examples for option 1 a proper list docs: stable-kernel-rules: move text around to improve flow docs: stable-kernel-rules: improve structure by changing headlines base/node: Remove duplicated include kernfs: attach uuid for every kernfs and report it in fsid kernfs: add stub helper for kernfs_generic_poll() x86/resctrl: make pseudo_lock_class a static const structure x86/MSR: make msr_class a static const structure ... |
||
|
Hugh Dickins
|
4b5b7850c9 |
mm,thp: fix nodeN/meminfo output alignment
Add one more space to FileHugePages and FilePmdMapped, so the output is aligned with other rows in /sys/devices/system/node/nodeN/meminfo. Link: https://lkml.kernel.org/r/be861b50-a790-e041-bcb0-2a987dcfd1a@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
GUO Zihua
|
7f0718eda1 |
base/node: Remove duplicated include
Remove duplicated include of linux/hugetlb.h. Resolves checkincludes message. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20230810120008.25297-1-guozihua@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
fc75f21645 |
driver core changes for 6.5-rc1
Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKSEQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoowCfT+Joha+cz4edAFUvd55lKPPJJFsAoNiprHmX
di37sirvn6vo54Hk0Nyq
=qqTo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Skip empty folders creation
sysfs: Improve readability by following the kernel coding style
drivers: fwnode: fix fwnode_irq_get[_byname]()
ata: ahci_platform: Make code agnostic to OF/ACPI
device property: Implement device_is_compatible()
ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
base/node: Use 'property' to identify an access parameter
driver core: device.h: add some missing kerneldocs
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
isa: Remove unnecessary checks
MAINTAINERS: add entry for auxiliary bus
debugfs: Correct the 'debugfs_create_str' docs
serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
iio: adc: Use devm_krealloc_array
hwmon: pmbus: Use devm_krealloc_array
|
||
|
Kirill A. Shutemov
|
dcdfdd40fa |
mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
||
|
Dave Jiang
|
7810f4dc87 |
base/node: Use 'property' to identify an access parameter
Usage of 'attr' and 'name' in the context of a sysfs attribute
definition are confusing because those read as being related to:
struct attribute .name
Rename 'name' to 'property' in preparation for renaming 'struct
node_hmem_attr' to a more generic name that can be used in more contexts
('struct access_coordinate'), and not be confused with 'struct
attribute'.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168332213518.2189163.18377767521423011290.stgit@djiang5-mobl3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Jiaqi Yan
|
44b8f8bf24 |
mm: memory-failure: add memory failure stats to sysfs
Patch series "Introduce per NUMA node memory error statistics", v2.
Background
==========
In the RFC for Kernel Support of Memory Error Detection [1], one advantage
of software-based scanning over hardware patrol scrubber is the ability to
make statistics visible to system administrators. The statistics include
2 categories:
* Memory error statistics, for example, how many memory error are
encountered, how many of them are recovered by the kernel. Note these
memory errors are non-fatal to kernel: during the machine check
exception (MCE) handling kernel already classified MCE's severity to be
unnecessary to panic (but either action required or optional).
* Scanner statistics, for example how many times the scanner have fully
scanned a NUMA node, how many errors are first detected by the scanner.
The memory error statistics are useful to userspace and actually not
specific to scanner detected memory errors, and are the focus of this
patchset.
Motivation
==========
Memory error stats are important to userspace but insufficient in kernel
today. Datacenter administrators can better monitor a machine's memory
health with the visible stats. For example, while memory errors are
inevitable on servers with 10+ TB memory, starting server maintenance when
there are only 1~2 recovered memory errors could be overreacting; in cloud
production environment maintenance usually means live migrate all the
workload running on the server and this usually causes nontrivial
disruption to the customer. Providing insight into the scope of memory
errors on a system helps to determine the appropriate follow-up action.
In addition, the kernel's existing memory error stats need to be
standardized so that userspace can reliably count on their usefulness.
Today kernel provides following memory error info to userspace, but they
are not sufficient or have disadvantages:
* HardwareCorrupted in /proc/meminfo: number of bytes poisoned in total,
not per NUMA node stats though
* ras:memory_failure_event: only available after explicitly enabled
* /dev/mcelog provides many useful info about the MCEs, but doesn't
capture how memory_failure recovered memory MCEs
* kernel logs: userspace needs to process log text
Exposing memory error stats is also a good start for the in-kernel memory
error detector. Today the data source of memory error stats are either
direct memory error consumption, or hardware patrol scrubber detection
(either signaled as UCNA or SRAO). Once in-kernel memory scanner is
implemented, it will be the main source as it is usually configured to
scan memory DIMMs constantly and faster than hardware patrol scrubber.
How Implemented
===============
As Naoya pointed out [2], exposing memory error statistics to userspace is
useful independent of software or hardware scanner. Therefore we
implement the memory error statistics independent of the in-kernel memory
error detector. It exposes the following per NUMA node memory error
counters:
/sys/devices/system/node/node${X}/memory_failure/total
/sys/devices/system/node/node${X}/memory_failure/recovered
/sys/devices/system/node/node${X}/memory_failure/ignored
/sys/devices/system/node/node${X}/memory_failure/failed
/sys/devices/system/node/node${X}/memory_failure/delayed
These counters describe how many raw pages are poisoned and after the
attempted recoveries by the kernel, their resolutions: how many are
recovered, ignored, failed, or delayed respectively. This approach can be
easier to extend for future use cases than /proc/meminfo, trace event, and
log. The following math holds for the statistics:
* total = recovered + ignored + failed + delayed
These memory error stats are reset during machine boot.
The 1st commit introduces these sysfs entries. The 2nd commit populates
memory error stats every time memory_failure attempts memory error
recovery. The 3rd commit adds documentations for introduced stats.
[1] https://lore.kernel.org/linux-mm/7E670362-C29E-4626-B546-26530D54F937@gmail.com/T/#mc22959244f5388891c523882e61163c6e4d703af
[2] https://lore.kernel.org/linux-mm/7E670362-C29E-4626-B546-26530D54F937@gmail.com/T/#m52d8d7a333d8536bd7ce74253298858b1c0c0ac6
This patch (of 3):
Today kernel provides following memory error info to userspace, but each
has its own disadvantage
* HardwareCorrupted in /proc/meminfo: number of bytes poisoned in total,
not per NUMA node stats though
* ras:memory_failure_event: only available after explicitly enabled
* /dev/mcelog provides many useful info about the MCEs, but
doesn't capture how memory_failure recovered memory MCEs
* kernel logs: userspace needs to process log text
Exposes per NUMA node memory error stats as sysfs entries:
/sys/devices/system/node/node${X}/memory_failure/total
/sys/devices/system/node/node${X}/memory_failure/recovered
/sys/devices/system/node/node${X}/memory_failure/ignored
/sys/devices/system/node/node${X}/memory_failure/failed
/sys/devices/system/node/node${X}/memory_failure/delayed
These counters describe how many raw pages are poisoned and after the
attempted recoveries by the kernel, their resolutions: how many are
recovered, ignored, failed, or delayed respectively. The following math
holds for the statistics:
* total = recovered + ignored + failed + delayed
Link: https://lkml.kernel.org/r/20230120034622.2698268-1-jiaqiyan@google.com
Link: https://lkml.kernel.org/r/20230120034622.2698268-2-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Linus Torvalds
|
27bc50fc90 |
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam R. Howlett. An overlapping range-based tree for vmas. It it apparently slight more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com). This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU= =xfWx -----END PGP SIGNATURE----- Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ... |
||
|
Muchun Song
|
a4a00b451e |
mm: hugetlb: eliminate memory-less nodes handling
The memory-notify-based approach aims to handle meory-less nodes, however, it just adds the complexity of code as pointed by David in thread [1]. The handling of memory-less nodes is introduced by commit |
||
|
Muchun Song
|
b958d4d08f |
mm: hugetlb: simplify per-node sysfs creation and removal
Patch series "simplify handling of per-node sysfs creation and removal",
v4.
This patch (of 2):
The following commit offload per-node sysfs creation and removal to a
kworker and did not say why it is needed. And it also said "I don't know
that this is absolutely required". It seems like the author was not sure
as well. Since it only complicates the code, this patch will revert the
changes to simplify the code.
|
||
|
Yosry Ahmed
|
ebc97a52b5 |
mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.
We keep track of several kernel memory stats (total kernel memory, page
tables, stack, vmalloc, etc) on multiple levels (global, per-node,
per-memcg, etc). These stats give insights to users to how much memory
is used by the kernel and for what purposes.
Currently, memory used by KVM mmu is not accounted in any of those
kernel memory stats. This patch series accounts the memory pages
used by KVM for page tables in those stats in a new
NR_SECONDARY_PAGETABLE stat. This stat can be later extended to account
for other types of secondary pages tables (e.g. iommu page tables).
KVM has a decent number of large allocations that aren't for page
tables, but for most of them, the number/size of those allocations
scales linearly with either the number of vCPUs or the amount of memory
assigned to the VM. KVM's secondary page table allocations do not scale
linearly, especially when nested virtualization is in use.
From a KVM perspective, NR_SECONDARY_PAGETABLE will scale with KVM's
per-VM pages_{4k,2m,1g} stats unless the guest is doing something
bizarre (e.g. accessing only 4kb chunks of 2mb pages so that KVM is
forced to allocate a large number of page tables even though the guest
isn't accessing that much memory). However, someone would need to either
understand how KVM works to make that connection, or know (or be told) to
go look at KVM's stats if they're running VMs to better decipher the stats.
Furthermore, having NR_PAGETABLE side-by-side with NR_SECONDARY_PAGETABLE
is informative. For example, when backing a VM with THP vs. HugeTLB,
NR_SECONDARY_PAGETABLE is roughly the same, but NR_PAGETABLE is an order
of magnitude higher with THP. So having this stat will at the very least
prove to be useful for understanding tradeoffs between VM backing types,
and likely even steer folks towards potential optimizations.
The original discussion with more details about the rationale:
https://lore.kernel.org/all/87ilqoi77b.wl-maz@kernel.org
This stat will be used by subsequent patches to count KVM mmu
memory usage.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220823004639.2387269-2-yosryahmed@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
Phil Auld
|
7ee951acd3 |
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
Using bin_attributes with a 0 size causes fstat and friends to return that 0 size. This breaks userspace code that retrieves the size before reading the file. Rather than reverting |
||
|
Miaohe Lin
|
da63dc84be |
drivers/base/node.c: fix compaction sysfs file leak
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node to fix
this issue.
Link: https://lkml.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com
Fixes:
|
||
|
David Hildenbrand
|
395f6081ba |
drivers/base/memory: determine and store zone for single-zone memory blocks
test_pages_in_a_zone() is just another nasty PFN walker that can easily stumble over ZONE_DEVICE memory ranges falling into the same memory block as ordinary system RAM: the memmap of parts of these ranges might possibly be uninitialized. In fact, we observed (on an older kernel) with UBSAN: UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50 index 7 is out of range for type 'zone [5]' CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...] Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019 Call Trace: dump_stack+0x9a/0xf0 ubsan_epilogue+0x9/0x7a __ubsan_handle_out_of_bounds+0x13a/0x181 test_pages_in_a_zone+0x3c4/0x500 show_valid_zones+0x1fa/0x380 dev_attr_show+0x43/0xb0 sysfs_kf_seq_show+0x1c5/0x440 seq_read+0x49d/0x1190 vfs_read+0xff/0x300 ksys_read+0xb8/0x170 do_syscall_64+0xa5/0x4b0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x7f01f4439b52 We seem to stumble over a memmap that contains a garbage zone id. While we could try inserting pfn_to_online_page() calls, it will just make memory offlining slower, because we use test_pages_in_a_zone() to make sure we're offlining pages that all belong to the same zone. Let's just get rid of this PFN walker and determine the single zone of a memory block -- if any -- for early memory blocks during boot. For memory onlining, we know the single zone already. Let's avoid any additional memmap scanning and just rely on the zone information available during boot. For memory hot(un)plug, we only really care about memory blocks that: * span a single zone (and, thereby, a single node) * are completely System RAM (IOW, no holes, no ZONE_DEVICE) If one of these conditions is not met, we reject memory offlining. Hotplugged memory blocks (starting out offline), always meet both conditions. There are three scenarios to handle: (1) Memory hot(un)plug A memory block with zone == NULL cannot be offlined, corresponding to our previous test_pages_in_a_zone() check. After successful memory onlining/offlining, we simply set the zone accordingly. * Memory onlining: set the zone we just used for onlining * Memory offlining: set zone = NULL So a hotplugged memory block starts with zone = NULL. Once memory onlining is done, we set the proper zone. (2) Boot memory with !CONFIG_NUMA We know that there is just a single pgdat, so we simply scan all zones of that pgdat for an intersection with our memory block PFN range when adding the memory block. If more than one zone intersects (e.g., DMA and DMA32 on x86 for the first memory block) we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. (3) Boot memory with CONFIG_NUMA At the point in time we create the memory block devices during boot, we don't know yet which nodes *actually* span a memory block. While we could scan all zones of all nodes for intersections, overlapping nodes complicate the situation and scanning all nodes is possibly expensive. But that problem has already been solved by the code that sets the node of a memory block and creates the link in the sysfs -- do_register_memory_block_under_node(). So, we hook into the code that sets the node id for a memory block. If we already have a different node id set for the memory block, we know that multiple nodes *actually* have PFNs falling into our memory block: we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. If there is no node id set, we do the same as (2) for the given node. Note that the call order in driver_init() is: -> memory_dev_init(): create memory block devices -> node_dev_init(): link memory block devices to the node and set the node id So in summary, we detect if there is a single zone responsible for this memory block and we consequently store the zone in that case in the memory block, updating it during memory onlining/offlining. Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Rafael Parra <rparrazo@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rafael Parra <rparrazo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
cc6515591b |
drivers/base/node: rename link_mem_sections() to register_memory_block_under_node()
Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2. I remember talking to Michal in the past about removing test_pages_in_a_zone(), which we use for: * verifying that a memory block we intend to offline is really only managed by a single zone. We don't support offlining of memory blocks that are managed by multiple zones (e.g., multiple nodes, DMA and DMA32) * exposing that zone to user space via /sys/devices/system/memory/memory*/valid_zones Now that I identified some more cases where test_pages_in_a_zone() might go wrong, and we received an UBSAN report (see patch #3), let's get rid of this PFN walker. So instead of detecting the zone at runtime with test_pages_in_a_zone() by scanning the memmap, let's determine and remember for each memory block if it's managed by a single zone. The stored zone can then be used for the above two cases, avoiding a manual lookup using test_pages_in_a_zone(). This avoids eventually stumbling over uninitialized memmaps in corner cases, especially when ZONE_DEVICE ranges partly fall into memory block (that are responsible for managing System RAM). Handling memory onlining is easy, because we online to exactly one zone. Handling boot memory is more tricky, because we want to avoid scanning all zones of all nodes to detect possible zones that overlap with the physical memory region of interest. Fortunately, we already have code that determines the applicable nodes for a memory block, to create sysfs links -- we'll hook into that. Patch #1 is a simple cleanup I had laying around for a longer time. Patch #2 contains the main logic to remove test_pages_in_a_zone() and further details. [1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com [2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com This patch (of 2): Let's adjust the stale terminology, making it match unregister_memory_block_under_nodes() and do_register_memory_block_under_node(). We're dealing with memory block devices, which span 1..X memory sections. Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rafael Parra <rparrazo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Hildenbrand
|
2848a28b0a |
drivers/base/node: consolidate node device subsystem initialization in node_dev_init()
... and call node_dev_init() after memory_dev_init() from driver_init(), so before any of the existing arch/subsys calls. All online nodes should be known at that point: early during boot, arch code determines node and zone ranges and sets the relevant nodes online; usually this happens in setup_arch(). This is in line with memory_dev_init(), which initializes the memory device subsystem and creates all memory block devices. Similar to memory_dev_init(), panic() if anything goes wrong, we don't want to continue with such basic initialization errors. The important part is that node_dev_init() gets called after memory_dev_init() and after cpu_dev_init(), but before any of the relevant archs call register_cpu() to register the new cpu device under the node device. The latter should be the case for the current users of topology_init(). Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64) Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jarkko Sakkinen
|
50468e4313 |
x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node
== Problem == The amount of SGX memory on a system is determined by the BIOS and it varies wildly between systems. It can be as small as dozens of MB's and as large as many GB's on servers. Just like how applications need to know how much regular RAM is available, enclave builders need to know how much SGX memory an enclave can consume. == Solution == Introduce a new sysfs file: /sys/devices/system/node/nodeX/x86/sgx_total_bytes to enumerate the amount of SGX memory available in each NUMA node. This serves the same function for SGX as /proc/meminfo or /sys/devices/system/node/nodeX/meminfo does for normal RAM. 'sgx_total_bytes' is needed today to help drive the SGX selftests. SGX-specific swap code is exercised by creating overcommitted enclaves which are larger than the physical SGX memory on the system. They currently use a CPUID-based approach which can diverge from the actual amount of SGX memory available. 'sgx_total_bytes' ensures that the selftests can work efficiently and do not attempt stupid things like creating a 100,000 MB enclave on a system with 128 MB of SGX memory. == Implementation Details == Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node: == ABI Design Discussion == As opposed to the per-node ABI, a single, global ABI was considered. However, this would prevent enclaves from being able to size themselves so that they fit on a single NUMA node. Essentially, a single value would rule out NUMA optimizations for enclaves. Create a new "x86/" directory inside each "nodeX/" sysfs directory. 'sgx_total_bytes' is expected to be the first of at least a few sgx-specific files to be placed in the new directory. Just scanning /proc/meminfo, these are the no-brainers that we have for RAM, but we need for SGX: MemTotal: xxxx kB // sgx_total_bytes (implemented here) MemFree: yyyy kB // sgx_free_bytes SwapTotal: zzzz kB // sgx_swapped_bytes So, at *least* three. I think we will eventually end up needing something more along the lines of a dozen. A new directory (as opposed to being in the nodeX/ "root") directory avoids cluttering the root with several "sgx_*" files. Place the new file in a new "nodeX/x86/" directory because SGX is highly x86-specific. It is very unlikely that any other architecture (or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/" as opposed to "x86/" was also considered. But, there is a real chance this can get used for other arch-specific purposes. [ dhansen: rewrite changelog ] Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org |
||
|
David Hildenbrand
|
50f9481ed9 |
mm/memory_hotplug: remove CONFIG_MEMORY_HOTPLUG_SPARSE
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest] Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
2d338201d5 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"147 patches, based on
|
||
|
Mike Rapoport
|
859a85ddf9 |
mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE
Patch series "mm: remove pfn_valid_within() and CONFIG_HOLES_IN_ZONE". After recent updates to freeing unused parts of the memory map, no architecture can have holes in the memory map within a pageblock. This makes pfn_valid_within() check and CONFIG_HOLES_IN_ZONE configuration option redundant. The first patch removes them both in a mechanical way and the second patch simplifies memory_hotplug::test_pages_in_a_zone() that had pfn_valid_within() surrounded by more logic than simple if. This patch (of 2): After recent changes in freeing of the unused parts of the memory map and rework of pfn_valid() in arm and arm64 there are no architectures that can have holes in the memory map within a pageblock and so nothing can enable CONFIG_HOLES_IN_ZONE which guards non trivial implementation of pfn_valid_within(). With that, pfn_valid_within() is always hardwired to 1 and can be completely removed. Remove calls to pfn_valid_within() and CONFIG_HOLES_IN_ZONE. Link: https://lkml.kernel.org/r/20210713080035.7464-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210713080035.7464-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tian Tao
|
75bd50fa84 |
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
Reading /sys/devices/system/cpu/cpuX/nodeX/ returns cpumap and cpulist. However, the size of this file is limited to PAGE_SIZE because of the limitation for sysfs attribute. This patch moves to use bin_attribute to extend the ABI to be more than one page so that cpumap bitmask and list won't be potentially trimmed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210806110251.560-5-song.bao.hua@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Jinchao Wang
|
e7deeb9d79 |
driver: base: Prefer unsigned int to bare use of unsigned
Fix checkpatch warnings:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: Jinchao Wang <wjc@cdjrlc.com>
Link: https://lore.kernel.org/r/20210628171907.63646-2-wjc@cdjrlc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Linus Torvalds
|
f5c13f1fde |
Driver core changes for 5.14-rc1
Here is the small set of driver core and debugfs updates for 5.14-rc1. Included in here are: - debugfs api cleanups (touched some drivers) - devres updates - tiny driver core updates and tweaks Nothing major in here at all, and all have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM7jA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yloDQCfZOlLYXF+2KgXJQqevNnRiu7/B1gAn3aCX6xh UWVUfu5LDIXi2uFERRT1 =Ze3R -----END PGP SIGNATURE----- Merge tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg KH: "Here is the small set of driver core and debugfs updates for 5.14-rc1. Included in here are: - debugfs api cleanups (touched some drivers) - devres updates - tiny driver core updates and tweaks Nothing major in here at all, and all have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) docs: ABI: testing: sysfs-firmware-memmap: add some memmap types. devres: Enable trace events devres: No need to call remove_nodes() when there none present devres: Use list_for_each_safe_from() in remove_nodes() devres: Make locking straight forward in release_nodes() kernfs: move revalidate to be near lookup drivers/base: Constify static attribute_group structs firmware_loader: remove unneeded 'comma' macro devcoredump: remove contact information driver core: Drop helper devm_platform_ioremap_resource_wc() component: Rename 'dev' to 'parent' component: Drop 'dev' argument to component_match_realloc() device property: Don't check for NULL twice in the loops driver core: auxiliary bus: Fix typo in the docs drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO debugfs: remove return value of debugfs_create_ulong() debugfs: remove return value of debugfs_create_bool() scsi: snic: debugfs: remove local storage of debugfs files b43: don't save dentries for debugfs b43legacy: don't save dentries for debugfs ... |
||
|
Mel Gorman
|
f19298b951 |
mm/vmstat: convert NUMA statistics to basic NUMA counters
NUMA statistics are maintained on the zone level for hits, misses, foreign etc but nothing relies on them being perfectly accurate for functional correctness. The counters are used by userspace to get a general overview of a workloads NUMA behaviour but the page allocator incurs a high cost to maintain perfect accuracy similar to what is required for a vmstat like NR_FREE_PAGES. There even is a sysctl vm.numa_stat to allow userspace to turn off the collection of NUMA statistics like NUMA_HIT. This patch converts NUMA_HIT and friends to be NUMA events with similar accuracy to VM events. There is a possibility that slight errors will be introduced but the overall trend as seen by userspace will be similar. The counters are no longer updated from vmstat_refresh context as it is unnecessary overhead for counters that may never be read by userspace. Note that counters could be maintained at the node level to save space but it would have a user-visible impact due to /proc/zoneinfo. [lkp@intel.com: Fix misplaced closing brace for !CONFIG_NUMA] Link: https://lkml.kernel.org/r/20210512095458.30632-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Rikard Falkeborn
|
5a576764e4 |
drivers/base: Constify static attribute_group structs
These are only used by putting their address in an array of pointers to const struct attribute_group (either directly or via the __ATTRIBUTE_GROUP macro). Make them const to allow the compiler to place them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20210528213408.20067-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Ruiqi Gong
|
fd03c075e3 |
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
Mark DEVICE_ATTR_RO(name) in CACHE_ATTR(name, fmt)'s definition as static to fix
the following Sparse tool reports:
drivers/base/node.c:239:1: warning:
symbol 'dev_attr_line_size' was not declared. Should it be static?
drivers/base/node.c:240:1: warning:
symbol 'dev_attr_indexing' was not declared. Should it be static?
Where dev_attr_{line_size,indexing} are generated by CACHE_ATTR's expansion.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Link: https://lore.kernel.org/r/20210514020548.32483-1-gongruiqi1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Dan Carpenter
|
4ce535ec00 |
node: fix device cleanups in error handling code
We can't use kfree() to free device managed resources so the kfree(dev)
is against the rules.
It's easier to write this code if we open code the device_register() as
a device_initialize() and device_add(). That way if dev_set_name() set
name fails we can call put_device() and it will clean up correctly.
Fixes:
|
||
|
Shakeel Butt
|
b603894248 |
mm: memcg: add swapcache stat for memcg v2
This patch adds swapcache stat for the cgroup v2. The swapcache represents the memory that is accounted against both the memory and the swap limit of the cgroup. The main motivation behind exposing the swapcache stat is for enabling users to gracefully migrate from cgroup v1's memsw counter to cgroup v2's memory and swap counters. Cgroup v1's memsw limit allows users to limit the memory+swap usage of a workload but without control on the exact proportion of memory and swap. Cgroup v2 provides separate limits for memory and swap which enables more control on the exact usage of memory and swap individually for the workload. With some little subtleties, the v1's memsw limit can be switched with the sum of the v2's memory and swap limits. However the alternative for memsw usage is not yet available in cgroup v2. Exposing per-cgroup swapcache stat enables that alternative. Adding the memory usage and swap usage and subtracting the swapcache will approximate the memsw usage. This will help in the transparent migration of the workloads depending on memsw usage and limit to v2' memory and swap counters. The reasons these applications are still interested in this approximate memsw usage are: (1) these applications are not really interested in two separate memory and swap usage metrics. A single usage metric is more simple to use and reason about for them. (2) The memsw usage metric hides the underlying system's swap setup from the applications. Applications with multiple instances running in a datacenter with heterogeneous systems (some have swap and some don't) will keep seeing a consistent view of their usage. [akpm@linux-foundation.org: fix CONFIG_SWAP=n build] Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Muchun Song
|
380780e718 |
mm: memcontrol: convert NR_FILE_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_PMDMAPPED account to pages. This patch is
consistent with
|
||
|
Muchun Song
|
a1528e21f8 |
mm: memcontrol: convert NR_SHMEM_PMDMAPPED account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_PMDMAPPED account to pages. This patch is
consistent with
|
||
|
Muchun Song
|
57b2847d3c |
mm: memcontrol: convert NR_SHMEM_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with
|
||
|
Muchun Song
|
bf9ecead53 |
mm: memcontrol: convert NR_FILE_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with if hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_THPS account to pages. This patch is consistent
with
|
||
|
Muchun Song
|
69473e5de8 |
mm: memcontrol: convert NR_ANON_THPS account to pages
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with
|
||
|
Shakeel Butt
|
f0c0c115fb |
mm: memcontrol: account pagetables per node
For many workloads, pagetable consumption is significant and it makes sense to expose it in the memory.stat for the memory cgroups. However at the moment, the pagetables are accounted per-zone. Converting them to per-node and using the right interface will correctly account for the memory cgroups as well. [akpm@linux-foundation.org: export __mod_lruvec_page_state to modules for arch/mips/kvm/] Link: https://lkml.kernel.org/r/20201130212541.2781790-3-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Laurent Dufour
|
90c7eaeb14 |
mm: don't panic when links can't be created in sysfs
At boot time, or when doing memory hot-add operations, if the links in sysfs can't be created, the system is still able to run, so just report the error in the kernel log rather than BUG_ON and potentially make system unusable because the callpath can be called with locks held. Since the number of memory blocks managed could be high, the messages are rate limited. As a consequence, link_mem_sections() has no status to report anymore. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200915094143.79181-4-ldufour@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
fe151462bd |
Driver Core patches for 5.10-rc1
Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c4yA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylS7gCfcS+7/PE42eXxMY0z8rBX8aDMadIAn2DVEghA
Eoh9UoMEW4g1uMKORA0c
=CVAW
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
regmap: debugfs: use semicolons rather than commas to separate statements
platform/x86: intel_pmc_core: do not create a static struct device
drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
drivers core: Miscellaneous changes for sysfs_emit
drivers core: Reindent a couple uses around sysfs_emit
drivers core: Remove strcat uses around sysfs_emit and neaten
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
dyndbg: use keyword, arg varnames for query term pairs
driver core: force NOIO allocations during unplug
platform_device: switch to simpler IDA interface
driver core: platform: Document return type of more functions
Revert "driver core: Annotate dev_err_probe() with __must_check"
Revert "test_firmware: Test platform fw loading on non-EFI systems"
iio: adc: xilinx-xadc: use devm_krealloc()
hwmon: pmbus: use more devres helpers
devres: provide devm_krealloc()
syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
...
|
||
|
Rafael J. Wysocki
|
e4174ff78b |
Merge branch 'acpi-numa'
* acpi-numa: docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ACPI: Support Generic Initiator only domains ACPI / NUMA: Add stub function for pxm_to_node() irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory ACPI: Remove side effect of partly creating a node in acpi_get_node() ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node() ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node() ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT ACPI: Add out of bounds and numa_off protections to pxm_to_node() |
||
|
Jonathan Cameron
|
894c26a1c2 |
ACPI: Support Generic Initiator only domains
Generic Initiators are a new ACPI concept that allows for the description of proximity domains that contain a device which performs memory access (such as a network card) but neither host CPU nor Memory. This patch has the parsing code and provides the infrastructure for an architecture to associate these new domains with their nearest memory processing node. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Joe Perches
|
6284a6e894 |
drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
Remove the trailing semicolon from the macro and add it to its uses. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/faf51a671160cf884efa68fb458d3e8a44b1a7a7.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
7981593bf0 |
mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
Convert the unbound sprintf in hugetlb_report_node_meminfo to use sysfs_emit_at so that no possible overrun of a PAGE_SIZE buf can occur. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Link: https://lore.kernel.org/r/894b351b82da6013cde7f36ff4b5493cd0ec30d0.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
948b3edba8 |
drivers core: Miscellaneous changes for sysfs_emit
Change additional instances that could use sysfs_emit and sysfs_emit_at that the coccinelle script could not convert. o macros creating show functions with ## concatenation o unbound sprintf uses with buf+len for start of output to sysfs_emit_at o returns with ?: tests and sprintf to sysfs_emit o sysfs output with struct class * not struct device * arguments Miscellanea: o remove unnecessary initializations around these changes o consistently use int len for return length of show functions o use octal permissions and not S_<FOO> o rename a few show function names so DEVICE_ATTR_<FOO> can be used o use DEVICE_ATTR_ADMIN_RO where appropriate o consistently use const char *output for strings o checkpatch/style neatening Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8bc24444fe2049a9b2de6127389b57edfdfe324d.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
27275d3018 |
drivers core: Reindent a couple uses around sysfs_emit
Just a couple of whitespace realignment to open parenthesis for multi-line statements. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/33224191421dbb56015eded428edfddcba997d63.1600285923.git.joe@perches.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joe Perches
|
aa838896d8 |
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
Convert the various sprintf fmaily calls in sysfs device show functions
to sysfs_emit and sysfs_emit_at for PAGE_SIZE buffer safety.
Done with:
$ spatch -sp-file sysfs_emit_dev.cocci --in-place --max-width=80 .
And cocci script:
$ cat sysfs_emit_dev.cocci
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
return
- strcpy(buf, chr);
+ sysfs_emit(buf, chr);
...>
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- sprintf(buf,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- snprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
len =
- scnprintf(buf, PAGE_SIZE,
+ sysfs_emit(buf,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
identifier len;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
<...
- len += scnprintf(buf + len, PAGE_SIZE - len,
+ len += sysfs_emit_at(buf, len,
...);
...>
return len;
}
@@
identifier d_show;
identifier dev, attr, buf;
expression chr;
@@
ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf)
{
...
- strcpy(buf, chr);
- return strlen(buf);
+ return sysfs_emit(buf, chr);
}
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/3d033c33056d88bbe34d4ddb62afd05ee166ab9a.1600285923.git.joe@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Laurent Dufour
|
f85086f95f |
mm: don't rely on system state to detect hot-plug operations
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes:
|