The op argument is missing the colon and is not picked up by the
kerneldoc generator. Fix it to address the following build warning:
drivers/spi/spi-mtk-snfi.c:1201: warning: Function parameter or struct member 'op' not described in 'mtk_snand_is_page_ops'
Fixes: 764f1b7481 ("spi: add driver for MTK SPI NAND Flash Interface")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20241021142113.71081-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32MP25 SOC has capability to behave in device mode however
missing .has_device_mode within its stm32mp25_spi_cfg structure leads
to not being able to enable the device mode.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20241009-spi-mp25-device-fix-v1-1-8e5ca7db7838@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmcAZPQACgkQJNaLcl1U
h9AcWgf9Hj53LZPeQgf/fDgr6ZEqpxR4v+ZStlHSlm4gbIHs84Wtj+mPMYFJ1hVK
0fL34wKKTd8ckhp4Ys/8mNyMRrZegmQET8kEWoeM+gqAlzLQkDuJ5kQEaZlKYeRb
Q2aiQfLxvvKVoxdJNOq8SZHlU9in1X4y8sZ1okfYY2lFS//pi3+P8IGFlN/K7vTs
hxucI5gNsithiVQ1nCzLP6BawwZcICo/zTpiBt4Xiuj7GohrWsWFq9fqwx6Jj6xh
nkvHdpuC743qrcUoKjnXVr3PCKjDK+pSp84O7aDgrlC2HZuXyDvhRKAw5NtL0HwH
2opB09eItz1bn4KRCf6MrY6/7VV5Rw==
=Mjs1
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi_controller_is_target() check is missing for pm_runtime_disable()
in cdns_spi_remove(), add it.
Fixes: b1b90514ea ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: d36ccd9f7e ("spi: cadence: Runtime pm adaptation")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 43b6bf406c ("spi: imx: fix runtime pm support for !CONFIG_PM")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Some driver specific fixes that came in during the merge window. Lorenzo
Bianconi did some extra testing on the recently added arioha driver and
found some issues, Alexander Dahl fixed some issues with signal delays
in the Atmel QSPI driver and Jinjie Ruan has been fixing some nits with
runtime PM cleanup.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbz0NIACgkQJNaLcl1U
h9B1KQf/fcq8ApnJCgD9EykeE9ekziI6PRwxc3XqI+DCws7CN2n4EbIsJxCeiygl
d4vWcnBssQGxVv6IbSl3Vgqr6PSAxBxibpBgmANR0HJ8YLFjxoaDTk9ufnJevOEm
pMgAtzvt3Ral1VwspKsz3puXEVoJaIoELfEQRB7D8XCX26ypD7+sZSN/AjMATp/N
zla5mPjQfGIX7dOis1kaRCQ0ysxoEdZ9zsyFlGs+VZkFIhHbu3KTLhlfADruOa7k
RKuVABAIJwqPz6Gew82xlh4hQPP+aecWNdwCSK6+4FZkZLgvUz2rx7evVj3U5+xd
Hc3jQmoGnVMYqeuK4BC8T0frnlp6eA==
=iJa9
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Some driver specific fixes that came in during the merge window.
Lorenzo Bianconi did some extra testing on the recently added arioha
driver and found some issues, Alexander Dahl fixed some issues with
signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
some nits with runtime PM cleanup"
* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Avoid overwriting delay register settings
spi: airoha: remove read cache in airoha_snand_dirmap_read()
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
spi: airoha: fix dirmap_{read,write} operations
Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).
All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.
Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0c ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 944c01a889 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 4a2f83b7f7 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix data length written and read in airoha_snand_write_data and
airoha_snand_read_data routines respectively if it is bigger than
SPI_MAX_TRANSFER_SIZE.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-2-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SPI_NFI_READ_FROM_CACHE_DONE bit must be written at the end of
dirmap_read operation even if it is already set.
In the same way, SPI_NFI_LOAD_TO_CACHE_DONE bit must be written at the
end of dirmap_write operation even if it is already set.
For this reason use regmap_write_bits() instead of regmap_set_bits().
This patch fixes mtd_pagetest kernel module test.
Fixes: a403997c12 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-1-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is quite a quiet release for sPI. The one new core feature here is
support for configuring the state of the MOSI pin when the bus is idle,
there are some devices which are very fragile in this regard even when
the chip select signal is not asserted. Otherwise we have some new
driver support, a bunch of small fixes and some general cleanup work.
- Support for configuring the state of the MOSI pin when the the bus is
idle.
- Add the Elgin JG0309-01 in spidev.
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX,
NXP i.MX8ULP, and Rockchip RK3576 controllers.
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbnaTcACgkQJNaLcl1U
h9BsXwf/bqArB1QiWT1t34WMKcowO6r0eCjRNSrpqcsOIprUa/0OYxXqsPJzigKV
g9HF0w2uh15NByTv+KulH4r0QPa9JOeFHFx31+bec8PFdJoUwcNjWNUi7EaQgOLp
/XzdahLhPhiBIraCts2JdRD8+4C9JlU0VeRdDRFMjl5+SB8Fjqx6mQ/rw68fEZGG
YvUTIVNT2h00W6aMKmKN0rni5ny2qNIDm6sVj/dWSWbQCPcYjVG3kxI2dmlKIm3S
ccKp4JHoOYpu9egp+t134bi/iLfOwP+vsmqWPqoI7J1cx78E9gH3QBf02KmTDbux
m/02FtCFDh5hyXke9yn/QIZvO2bKzA==
=UtQA
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
Two fields got removed but are still documented:
drivers/spi/spi-ep93xx.c:98: warning: Excess struct member 'dma_rx_data' description in 'ep93xx_spi'
drivers/spi/spi-ep93xx.c:98: warning: Excess struct member 'dma_tx_data' description in 'ep93xx_spi'
Fixes: 3cfe73256905 ("spi: ep93xx: add DT support for Cirrus EP93xx")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add OF ID match table
- add device tree DMA request, so we can probe defer, in case DMA is not
ready yet
- drop DMA platform code
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm_pm_runtime_enable(), devm_request_irq() and
devm_spi_register_controller() to simplify code.
And also register a callback spi_geni_release_dma_chan() with
devm_add_action_or_reset(), to release dma channel in both error
and device detach path, which can make sure the release sequence is
consistent with the original one.
1. Unregister spi controller.
2. Free the IRQ.
3. Free DMA chans
4. Disable runtime PM.
So the remove function can also be removed.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240912091701.3720857-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85 ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The flexspi on imx8ulp only has 16 LUTs, different with others which
have up to 32 LUTs.
Add a separate compatible string and nxp_fspi_devtype_data to support
flexspi on imx8ulp.
Fixes: ef89fd56bd ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-4-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.
Fixes: ef89fd56bd ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 783bf5d09f ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.
Fixes: 783bf5d09f ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused annotations from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240902184655.932699-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the of_device_id entry for "elgin,jg10309-01" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for elgin,jg10309-01
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: 5f3eee1eef ("spi: spidev: Add an entry for elgin,jg10309-01")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8a0ec8c2d7 ("spi: Insert the missing pci_dev_put()before
return") added two uses of pci_dev_put() with an uninitialized dma_dev,
resulting in the following compiler warnings (or errors with
CONFIG_WERROR) when building with clang:
drivers/spi/spi-pxa2xx-pci.c:150:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
150 | pci_dev_put(dma_dev);
| ^~~~~~~
drivers/spi/spi-pxa2xx-pci.c:228:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
228 | pci_dev_put(dma_dev);
| ^~~~~~~
Commit 609d7ffdc4 ("spi: pxa2xx-pci: Balance reference count for PCI
DMA device") added a call to pci_dev_put() via
devm_add_action_or_reset() in case of failures, so the recent change was
incorrect for multiple reasons. Revert it altogether.
Fixes: 8a0ec8c2d7 ("spi: Insert the missing pci_dev_put()before return")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/CAMuHMdWNjo69_W6f+R9QJJOf8uF0htg2XazeS-yjugJv3UM+kg@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240902-spi-revert-8a0ec8c2d736-v1-1-928b829fed2b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In zynq_qspi_exec_mem_op(), the temporary buffer is allocated with
kzalloc and then immediately initialized using memset to 0xff. To
optimize this, replace kzalloc with kmalloc, as the zeroing operation
is redundant and unnecessary.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240814192839.345523-1-visitorckw@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_spi_alloc_host() so that there's no need to call
spi_controller_put() in the error path.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked.
Fixes: e58db3bcd9 ("spi: intel: Add default partition and name to the second chip")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20240830074106.8744-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
