cb6fcef8b4
106 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Greg Kroah-Hartman
|
7528cb0f65 |
IIO: 1st set of fixes for the 6.12 cycle.
Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmcKj/oRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foixog//XmU8jXEmkR236fViMBSJSY7mOAEwnZuh LEOY8BDujHiu7XU+iz+DkXCXURaniENv50BHlK8z0OkukynaYLSmPmffwx2WG02Z kXYl/9F9vWvqKZXms5fGJGy44b4sHXTsB+BBXHi8GB4ia5J/y6xN/561vVngw1Bg ZsnZcvw/lq+XrGySOsYcMh7zsem+SrEBK4lLhhyXumxWwYKkplu9u9JZZZ6Z3uEq A5BhdShNGYWu1wXqJ7t7VxhGzgpIUmF65aG+LyL/dx+2aMd3umZN92qYg9cea2b2 5Pu3JVer9uFL20c9zBTcpxcPADJLMWwuHq0LxFIawiLAyHySZUN4MJ4DCrhHI0KR C+RUJCiXvl0cKKgd6VAtLLyvmQfdOXUbfa2BCiw+fE7CkbdCNM7WRI5cnkMDfa9p 3EghQBwmF721GHXccq/YdfrDF5Jd9TKViYQjGCljJvQeieAdGbcYTuL7yI/u3eng CU2QhZ2kQo7bk4u1WcG6KFHonQT2IKLWwzq+dst7Npg4zgram6ciCbRRKZsGlmIm lOybHMYsTju7fbqQ45Ka3EUzWHNfzF4EOZY4sbVKA1Hg1kzRmeR9qOdr9NAiH00r Z19xa6Ef9w6zckhiw8L1OCdw70XEX2jMpzdsabYKkmDiZivUJHpA0GSPr9PV74qe iWYt3V3+hgE= =xo8X -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ... |
||
Javier Carrasco
|
6b8e9dbfae |
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.
Fixes:
|
||
Javier Carrasco
|
5c9644a683 |
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
Format the entries of these drivers in the Kconfig, where spaces instead of tabs were used. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241007-ad2s1210-select-v2-1-7345d228040f@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Javier Carrasco
|
c64643ed4e |
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
This driver makes use of regmap_spi, but does not select the required
module.
Add the missing 'select REGMAP_SPI'.
Fixes:
|
||
Al Viro
|
5f60d5f6bb |
move asm/unaligned.h to linux/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h |
||
Antoniu Miclaus
|
6140a92cd0 |
iio: frequency: adf4377: add adf4378 support
Add separate handling for adf4378 within the driver. The main difference between adf4377 and adf4378 is that adf4378 has only one output which is handled by only one gpio. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://patch.msgid.link/20240729095047.25040-3-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Antoniu Miclaus
|
a1a09713b4 |
iio: frequency: adf4350: add clk provider
Add clk provider feature for the adf4350. Even though the driver was sent as an IIO driver in most cases the device is actually seen as a clock provider. This patch aims to cover actual usecases requested by users in order to completely control the output frequencies from userspace. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240621121403.47912-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Antoniu Miclaus
|
e2261b4a4d |
iio: frequency: adrf6780: rm clk provider include
The driver has no clock provider implementation, therefore remove the
include.
Fixes:
|
||
Linus Torvalds
|
5f16eb0549 |
Char/Misc and other driver subsystem changes for 6.10-rc1
Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY WVk7h01A0lHyacrzm5LN =s95M -----END PGP SIGNATURE----- Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and other driver subsystem updates for 6.10-rc1. Nothing major here, just lots of new drivers and updates for apis and new hardware types. Included in here are: - big IIO driver updates with more devices and drivers added - fpga driver updates - hyper-v driver updates - uio_pruss driver removal, no one uses it, other drivers control the same hardware now - binder minor updates - mhi driver updates - excon driver updates - counter driver updates - accessability driver updates - coresight driver updates - other hwtracing driver updates - nvmem driver updates - slimbus driver updates - spmi driver updates - other smaller misc and char driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits) misc: ntsync: mark driver as "broken" to prevent from building spmi: pmic-arb: Add multi bus support spmi: pmic-arb: Register controller for bus instead of arbiter spmi: pmic-arb: Make core resources acquiring a version operation spmi: pmic-arb: Make the APID init a version operation spmi: pmic-arb: Fix some compile warnings about members not being described dt-bindings: spmi: Deprecate qcom,bus-id dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe() spmi: hisi-spmi-controller: Do not override device identifier dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references spmi: make spmi_bus_type const extcon: adc-jack: Document missing struct members extcon: realtek: Remove unused of_gpio.h extcon: usbc-cros-ec: Convert to platform remove callback returning void extcon: usb-gpio: Convert to platform remove callback returning void extcon: max77843: Convert to platform remove callback returning void extcon: max3355: Convert to platform remove callback returning void extcon: intel-mrfld: Convert to platform remove callback returning void ... |
||
David Lechner
|
2f4bb1fa75
|
iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage()
We can reduce boilerplate code by using devm_regulator_get_enable_read_voltage(). The common mode voltage is now passed as a parameter in the init functions so we can avoid adding a state member that is only used during init. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-5-b1f11ab766c1@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Jonathan Cameron
|
de4eefe8f1 |
iio: frequency: admfm2000: Use device_for_each_child_node_scoped() to simplify error paths.
This loop definition automatically release the fwnode_handle on early exit simplifying error handling paths. Cc: Kim Seer Paller <kimseer.paller@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240330190849.1321065-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Kim Seer Paller
|
5659785a32 |
iio: frequency: admfm2000: New driver
Dual microwave down converter module with input RF and LO frequency ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down conversion path. Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Link: https://lore.kernel.org/r/20240123081059.5746-2-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Andy Shevchenko
|
f993267a72 |
iio: frequency: admv1014: Switch to device_property_match_property_string()
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Andy Shevchenko
|
7829a9d759 |
iio: frequency: adf4377: Switch to device_property_match_property_string()
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Greg Kroah-Hartman
|
b4b6cc10c6 |
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmUu3sURHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FohL9w/+PVaeiYsmuJfWcxjVhiGFz+HBbwSFcHFp ASXuYq9rYoea62JlvcLB3GJ43ziB80Am5qA5bWTkPHFqbAPZlgDzoGZGPMrpjfI1 iV6NwiPigRRTw2JjB0TDS8HepQomA1qA0FwXngLrSy1eQmN0/NJOp0k8m54OpCV+ FdW3dDy7UomXyVCb+OAOWNYvV20ZOK1/WK9yWCpPWZtOKMfX2cLLqiwtjm6VdXTg wtqSRVfBB/p7k3UapXiLuz4fExEancW4z2qYEaBK2beba6LFuFzvfwq/t6CJwVWD wd6mif+1eTtR9wxZcsmefsbB6r9zOd4eWRaCBjmW3fm9xNY2UDzWT29YpyDOyA8R llu44gDtlJvDpyUYi44rLDyZO886fJtlVLyOHOaVJy77SV+so16P9qC2qd9dJXtw 8/exWxNmiA/LwVq+SvvVgfY33yCynKv5St1cHMDDFzC1eZMnVGAaZ4HBp1wiGGuN T1ZWKMDWViH5F7ug2pKopKoemQyhmsa8JbUQc+NZS+5efdn6LlVhe1BVZ+4/A3jb BQ838lkl3O8D0XkS7urM6Ggs8m/D0eBLBpfgID/C4OaEJnn6G1ZVvNue5r99SNws JV9T7zJQ8G1NKl3s1+JrwBf7XeSKtlZa0cbWejbe4Ib2u+G9M863YS0Ivrk5yH+C XIojuxjOOmQ= =wth0 -----END PGP SIGNATURE----- Merge tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.7 Particularly great to see a resolver driver move out of staging via a massive set of changes. Only took 13 years :) One small patch added then reverted due to a report of test breakage (ashai-kasei,ak8975: Drop deprecated enums.) An immutable branch was used for some hid-senors changes in case there was a need to take them into the HID tree as well. New device support ----------------- adi,hmc425a - Add support for HMC540SLP3E broadband 4-bit digital attenuator. kionix,kx022a - Add support for the kx132-1211 accelerometer. Require significant driver rework to enable this including add a chip type specific structure to deal with the chip differences. - Add support for the kx132acr-lbz accelerometer (subset of the kx022a feature set). lltc,ltc2309 - New driver for this 8 channel ADC. microchip,mcp3911 - Add support for rest of mcp391x family of ADCs (there are various differences beyond simple channel count variation. Series includes some general driver cleanup. microchip,mcp3564 - New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564 and their R variants of 16/24bit ADCs. A few minor fixed followed. rohm,bu1390 - New driver for this pressure sensor. Staging graduation ------------------ adi,ad1210 (after 13 or so years :) - More or less a complete (step-wise) rewrite of this resolver driver to bring it up to date with modern IIO standards. The fault signal handling mapping to event channels was particularly complex and significant part of the changes. Features -------- iio-core - Add chromacity and color temperature channel types. adi,ad7192 - Oversampling ratio control (called fast settling in datasheet). adi,adis16475 - Add core support and then driver support for delta angle and delta velocity channels. These are intended for summation to establish angle and velocity changes over larger timescales. Fix was needed for alignment after the temperature channel. Further fix reduced set of devices for which the buffer support was applicable as seems burst reads don't cover these on all devices. hid-sensors-als - Chromacity and color temperatures support including in amd sfh. stx104 - Add support for counter subsystem to this multipurpose device. ti,twl6030 - Add missing device tree binding description. Clean up and minor fixes. ------------------------ treewide - Drop some unused declarations across IIO. - Make more use of device_get_match_data() instead of OF specific approaches. Similar cleanup to sets of drivers. - Stop platform remove callbacks returning anything by using the temporary remove_new() callback. - Use i2c_get_match_data() to cope nicely with all types of ID table entry. - Use device_get_match_data() for various platform device to cope with more types of firmware. - Convert from enum to pointer in ID tables allowing use of i2c_get_match_data(). - Fix sorting on some ID tables. - Include specific string helper headers rather than simply string_helpers.h docs - Better description of the ordering requirements etc for available_scan_masks. tools - Handle alignment of mixed sizes where the last element isn't the biggest correctly. Seems that doesn't happen often! adi,ad2s1210 - Lots of work from David Lechner on this driver including a few fixes that are going with the rework to avoid slowing that down. adi,ad4310 - Replace deprecated devm_clk_register() adi,ad74413r - Bring the channel function setting inline with the datasheet. adi,ad7192 - Change to FIELD_PREP(), FIELD_GET(). - Calculate f_order from the sinc filter and chop filter states. - Move more per chip config into data in struct ad7192_chip_info - Cleanup unused parameter in channel macros. adi,adf4350 - Make use of devm_* to simplify error handling for many of the setup calls in probe() / tear down in remove() and error paths. Some more work to be done on this one. - Use dev_err_probe() for errors in probe() callback. adi,adf4413 - Typo in function name prefix. adi,adxl345 - Add channel scale to the chip type specific structure and drop using a type field previously used for indirection. asahi,ak8985 - Fix a mismatch introduced when switching from enum->pointers in the match tables. amlogic,meson - Expand error logging during probe. invensense,mpu6050 - Support level-shifter control. Whilst no one is sure exactly what this is doing it is needed for some old boards. - Document mount-matrix dt-binding. mediatek,mt6577 - Use devm_clk_get_enabled() to replace open coded version and move everything over to being device managed. Drop now empty remove() callback. Fix follows to put the drvdata back. - Use dev_err_probe() for error reporting in probe() callback. memsic,mxc4005 - Add of_match_table. microchip,mcp4725 - Move various chip specific data from being looked up by chip ID to data in the chip type specific structure. silicon-labs,si7005 - Add of_match_table and entry in trivial-devices.yaml st,lsm6dsx - Add missing mount-matrix dt binding documentation. st,spear - Use devm_clk_get_enabled() and some other devm calls to move everything over to being device managed. Drop now empty remove() callback. - Use dev_err_probe() to better handled deferred probing and tidy up error reporting in probe() callback. st,stm32-adc - Add a bit of additional checking in probe() to protect against a NULL pointer (no known path to trigger it today). - Replace deprecated strncpy() ti,ads1015 - Allow for edge triggers. - Document interrupt in dt-bindings. * tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits) iio: Use device_get_match_data() iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero. dt-bindings: trivial-devices: add silabs,si7005 iio: si7005: Add device tree support drivers: imu: adis16475.c: Remove scan index from delta channels dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property iio: resolver: ad2s1210: remove of_match_ptr() iio: resolver: ad2s1210: remove DRV_NAME macro iio: resolver: ad2s1210: move out of staging staging: iio: resolver: ad2s1210: simplify code with guard(mutex) staging: iio: resolver: ad2s1210: clear faults after soft reset staging: iio: resolver: ad2s1210: refactor sample toggle staging: iio: resolver: ad2s1210: remove fault attribute staging: iio: resolver: ad2s1210: add label attribute support staging: iio: resolver: ad2s1210: add register/fault support summary staging: iio: resolver: ad2s1210: implement fault events iio: event: add optional event label support staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr ... |
||
Antoniu Miclaus
|
287d998af2 |
iio: admv1013: add mixer_vgate corner cases
Include the corner cases in the computation of the MIXER_VGATE register
value.
According to the datasheet: The MIXER_VGATE values follows the VCM such
as, that for a 0V to 1.8V VCM, MIXER_VGATE = 23.89 VCM + 81, and for a >
1.8V to 2.6V VCM, MIXER_VGATE = 23.75 VCM + 1.25.
Fixes:
|
||
Jinjie Ruan
|
9979cc6485 |
iio: frequency: adf4350: Use device managed functions and fix power down issue.
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
Also replace devm_regulator_get() and regulator_enable() with
devm_regulator_get_enable() helper and remove regulator_disable().
Replace iio_device_register() with devm_iio_device_register() and remove
iio_device_unregister().
And st->reg is not used anymore, so remove it.
As Jonathan pointed out, couple of things that are wrong:
1) The device is powered down 'before' we unregister it with the
subsystem and as such userspace interfaces are still exposed which
probably won't do the right thing if the chip is powered down.
2) This isn't done in the error paths in probe.
To solve this problem, register a new callback adf4350_power_down()
with devm_add_action_or_reset(), to enable software power down in both
error and device detach path. So the remove function can be removed.
Remove spi_set_drvdata() from the probe function, since spi_get_drvdata()
is not used anymore.
Fixes:
|
||
Greg Kroah-Hartman
|
e75850b457 |
Merge 6.5-rc6 into char-misc-next
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Antoniu Miclaus
|
320b92a4c1 |
drivers: iio: admv1013: add vcc regulators
Add regulators for the VCC supplies of the admv1013. The patch aims to align the implementation with the current admv1014 driver where all the VCC supplies are handled as regulators. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230731094455.26742-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Dan Carpenter
|
507397d19b |
iio: frequency: admv1013: propagate errors from regulator_get_voltage()
The regulator_get_voltage() function returns negative error codes.
This function saves it to an unsigned int and then does some range
checking and, since the error code falls outside the correct range,
it returns -EINVAL.
Beyond the messiness, this is bad because the regulator_get_voltage()
function can return -EPROBE_DEFER and it's important to propagate that
back properly so it can be handled.
Fixes:
|
||
Uwe Kleine-König
|
76f2c491a0 |
iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. To retain ordering move the request to a place that is executed later. This way the time of enable keeps the same. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230313185333.2776785-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Antoniu Miclaus
|
eda549e2e5 |
iio: frequency: adf4377: add support for ADF4377
The ADF4377 is a high performance, ultralow jitter, dual output integer-N phased locked loop (PLL) with integrated voltage controlled oscillator (VCO) ideally suited for data converter and mixed signal front end (MxFE) clock applications. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4377.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221115110041.71495-2-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Jonathan Cameron
|
d86186a6e0 |
iio: frequency: ad9523: Use devm_regulator_get_enable()
This driver only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The new devm_regulator_get_enable() replaces this boilerplate code. Note that in event of an error on the devm_regulator_get() the driver would have continued without enabling the regulator which is probably not a good idea. So here we handle any error as a reason to fail the probe(). In theory this may expose breakage on a platform that was previously papered over but it seems low risk. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-9-jic23@kernel.org |
||
Antoniu Miclaus
|
30475ef283 |
iio: frequency: admv1014: return -EINVAL directly
Remove extra step where the error code is assigned to the `ret` variable. Return instead error code directly. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220819104117.4600-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Uwe Kleine-König
|
129a90cf81 |
iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220808204740.307667-12-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Uwe Kleine-König
|
3ea5b370af |
iio: frequency: adf4371: Benefit from devm_clk_get_enabled() to simplify
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220808204740.307667-10-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Greg Kroah-Hartman
|
2a3c8f8a44 |
IIO new device support, features and minor fixes for 5.20
Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmLQBwARHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FohMHRAAi3nPM3IchXe886olumRgX5ke75vU+FNT sqQjqlpl6X7j5yNLU+HF6lC7zg3QzDnfWJ3Uo4C7s2sW7zO0997lkFx4jvF3yW9y 0nLDgYm1Y1te/qR84BE355pMEsYEJVZyPI/Z8UfuBh6IfnSDeTE5ZwCvlRMAchtp AX+j1114FQvZ8yfdIlFjlN4vYSxCGgEZzfWYhpch/Jv1y2Q0L17bpv/KWGt1AYaF VugmKoNTM3WzIABBNGWQ4l4ZVVuVpuiVUL90AKv6Qf+yDSqw94tuIM0NZpJ1rqLr 7tH568m7Eewh7zBp88PRB9XDiZVERvzdVQaT22+wlX+Vhn/SKeoK8PPpdLWD1YyG hXB0p+FGKncoKKgK1w9L7qRRNmsQDHowNHYMSjnzeBuyGQyEqwAXzNvvbiCqHh8y 7b8GW+CYo7//wIarg74Xl+/4LwdCGcMUJNuTm1efEgC7yGToY7JD63DNo3sylaII bfoT06/yogaay/rVLZs5n+MvDONaDt4AbTTErG48s0TzqD/O8Ys85AF0IvKwQ80N WMxe4y+gdJ6VuU+ww9+6WdUzxnx+5gt+ZA2iLxZFekOIUi3Tj+q47F+17Jvwyt7U 2wQzdtvNhHPwD5CqYpxD4iH/z5YFCtIHKjmUsVyAWGVbeuSS/QvFzpf39YWxBWO+ W1w6RStUbXo= =IcsE -----END PGP SIGNATURE----- Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO new device support, features and minor fixes for 5.20 Several on-running cleanup efforts dominate this time, plus the DMA safety alignment issue identified due to improved understanding of the restrictions as a result of Catalin Marinas' efforts in that area. One immutable branch in here due to MFD and SPMI elements needed for the qcom-rradc driver. Device support * bmi088 - Add support for bmi085 (accelerometer part of IMU) - Add support for bmi090l (accelerometer part of IMU) * mcp4922 - Add support for single channel device MCP4921 * rzg2l-adc - Add compatible and minor tweaks to support RZ/G2UL ADC * sca3300 - Add support for scl3300 including refactoring driver to support multiple device types and cleanup noticed whilst working on driver. * spmi-rradc - New driver for Qualcomm SPMI Round Robin ADC including necessary additional utility functions in SPMI core and related MFD driver. * ti-dac55781 - Add compatible for DAC121C081 which is very similar to existing parts. Features * core - Warn on iio_trigger_get() on an unregistered IIO trigger. * bma400 - Triggered buffer support - Activity and step counting - Misc driver improvements such as devm and header ordering * cm32181 - Add PM support. * cros_ec - Sensor location support * sx9324 - Add precharge resistor setting - Add internal compensation resistor setting - Add CS idle/sleep mode. * sx9360 - Add precharge resistor setting * vl53l0x - Handle reset GPIO, regulator and relax handling of irq type. Cleanup and minor fixes: Treewide changes - Cleanup of error handling in remove functions in many drivers. - Update dt-binding maintainers for a number of ADI bindings. - Several sets of conversion of drivers from device tree specific to generic device properties. Includes fixing up various related header and Kconfig issues. - Drop include of of.h from iio.h and fix up drivers that need to include it directly. - More moves of clusters of drivers into appropriate IIO_XXX namespaces. - Tree wide fix of a long running bug around DMA safety requirements. IIO was using __cacheline_aligned to pad iio_priv() structures. This worked for a long time by coincidence, but correct alignment is ARCH_KMALLOC_MINALIGN. As there is activity around this area, introduce an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather than every driver in future. Note, there have been no reports of this bug in the wild, and it may not happen on any platforms supported by upstream, so no rush to backport these fixes. Other cleanup * core - Switch to ida_alloc()/free() - Drop unused iio_get_time_res() - Octal permissions and DEVICE_ATTR_* macros. - Cleanup bared unsigned usage. * MAINTAINERS - Add include/dt-bindings/iio/ to the main IIO entry. * ad5380 - Comment syntax fix. * ad74413r - Call to for_each_set_bit_from(), with from value as 0 replaced. * ad7768-1 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * adxl345 - Fix wrong address in dt-binding example. * adxl367 - Drop extra update of FIFO watermark. * at91-sama5d2 - Limit requested watermark to the hwfifo size. * bmg160, bme680 - Typos * cio-dac - Switch to iomap rather than direct use of ioports * kxsd9 - Replace CONFIG_PM guards with new PM macros that let the compiler cleanly remove the unused code and structures when !CONFIG_PM * lsm6dsx - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move to Namespace. * meson_saradc - general cleanup. - Avoid attaching resources to iio_dev->dev - Use same struct device for all error messages - Convert to dev_err_probe() and use local struct device *dev to reduce code complexity. - Use devm_clk_get_optional() instead of hand rolling. - Use regmap_read_poll_timeout() instead of hand rolling. * mma7660 - Drop ACPI_PTR() use that is unhelpful. * mpu3050 - Stop exporting symbols not used outside of module - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace. * ping - Typo fix * qcom-spmi-rradc - Typo fix * sc27xx - Convert to generic struct u32_fract * srf08 - Drop a redundant check on !val * st_lsm6dsx - Limit the requested watermark to the hwfifo size. * stm32-adc - Use generic_handle_domain_irq() instead of opencoding. - Fix handling of ADC disable. * stm32-dac - Use str_enabled_disable() instead of open coding. * stx104 - Switch to iomap rather than direct use of ioports * tsc2046 - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core. * tsl2563 - Replace flush_scheduled_work() with cancel_delayed_work_sync() - Replace cancel_delayed_work() with cancel_delayed_work_sync() * vl53l0x - Make the VDD regulator optional by allowing a dummy regulator. * tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits) iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt() iio: adc: xilinx-xadc: Make use of device properties iio: light: cm32181: Add PM support iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode iio: adc: stm32-adc: disable adc before calibration iio: adc: stm32-adc: make safe adc disable iio: dac: ad5380: align '*' each line and drop unneeded blank line iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency" iio: Don't use bare "unsigned" dt-bindings: iio: dac: mcp4922: expand for mcp4921 support iio: dac: mcp4922: add support to mcp4921 iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace iio: adc: stm32-adc: Use generic_handle_domain_irq() proximity: vl53l0x: Make VDD regulator actually optional MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address iio: gyro: bmg160: Fix typo in comment ... |
||
Greg Kroah-Hartman
|
315f7e15c2 |
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmKvUOsRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foj9+BAAgT/0u5a8SNuu0Cwu9JrHt/d8PHX5ZKfz CDzagToCptHIYbJfXPnoVi0rGoUWaKG5Oo6Z+1vEQ9jRy4HyAWSR/MrInbSyYdc9 hiHiHEyhycjbe+Dc/NLd859fnQNGXhg5bp32u+nO5JGAQBM93KF7r05salO/XT1O 34D3waV1cWcyhA9JqQysD/xczkYaWsuwGU33N7D5hfe9Ws0UqoQESYoUrO7N+RMr 6AwT2qMvmIeoKkIupVw+N58knaSRN8qUACN9+BiR4dQyL40iu1BSrVSH4RCvTlsc WBGDz4G50lmRg3bE/bI1T53lFGjMpvjgOXOOP025llazumOM5azhhHGlA/iPk7a7 NMPd1Oxuo7fGqASZiR0I6X4pfo2UEtwwusfIb+QfNZQ2bgEExPKtk4F/20Tpi4JY OV37Q3tTFYx3Wn+rpmzN50GDjMprgNBwYewmE8yAsoXVpsgmkqTVMqDMkmvEQBav ajuoUNC/ncMtfjWhphEKOUw2L96acltfIM1PTnMWEUaQq2FyidJM2DcoBh8MOZaa ms7qO9Hbab/+qPZJJfEQ/O+SkVDP/SWZdGYiazJdda731LzpPdwlQM2oGJjsNeQE 4F5TWgTVfG/gN47NXyp53zbxls0nkvLy09I1xiUPA23DKnhiD+dsGK72OWth6cd2 DQ++coHl140= =AtPS -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO fixes for the 5.19 cycle. Most of these have been in next for a long time. Unfortunately there was one stray patch in the branch (wasn't a fix), so I've just rebased to remove that. * testing - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. * Various drivers - Fix ordering of iio_get_trigger() being called before iio_trigger_register() * adi,admv1014 - Fix dubious x & !y warning. * adi,axi-adc - Fix missing of_node_put() in error and normal paths. * aspeed,adc - Add missing of_node_put() * fsl,mma8452 - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). * fsl,vf610 - Fix documentation of in_conversion_mode ABI. * iio-trig-sysfs - Ensure irq work has finished before freeing the trigger. * invensense,mpu3050 - Disable regulators in error path. * invensense,icm42600 - Fix collision of enum value of 0 with error path where 0 is no match. * renesas,rzg2l_Adc - Add missing fwnode_handle_put() in error path. * rescale - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. * semtech,sx9324 - Check return value of read of pin_defs * st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x * ti,ads131e08 - Add missing fwnode_handle_put() in error paths. * xilinx,ams - Fix variable checked for error from platform_get_irq() * x-powers,axp288 - Overide TS_PIN bias current for boards where it is not correctly initialized. * yamaha,yas530 - Fix inverted check on calibration data being all zeros. * tag 'iio-fixes-for-5.19a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ... |
||
Antoniu Miclaus
|
6f6bd75919 |
iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
The warning comes from __BF_FIELD_CHECK() specifically BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ ~((_mask) >> __bf_shf(_mask)) & (_val) : 0, \ _pfx "value too large for the field"); \ The code was using !(enum value) which is not particularly easy to follow so replace that with explicit matching and use of ? 0 : 1; or ? 1 : 0; to improve readability. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220511090006.90502-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Jonathan Cameron
|
9a5b11884c |
iio: frequency: adrf6780: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
Jonathan Cameron
|
f890aaac77 |
iio: frequency: admv4420: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
Jonathan Cameron
|
a3e38a557a |
iio: frequency: admv1014: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
Jonathan Cameron
|
b3f3f8d264 |
iio: frequency: admv1013: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
Jonathan Cameron
|
0bb5675bef |
iio: frequency: adf4371: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Fixes:
|
||
Jonathan Cameron
|
389b8972eb |
iio: frequency: adf4350: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Updated help text to 'may' require buffers to be in their own cacheline.
Fixes:
|
||
Jonathan Cameron
|
8ff2eb625c |
iio: frequency: ad9523: Fix alignment for DMA safety
____cacheline_aligned is an insufficient guarantee for non-coherent DMA
on platforms with 128 byte cachelines above L1. Switch to the updated
IIO_DMA_MINALIGN definition.
Updated help text to 'may' require buffers to be in their own cacheline.
Fixes:
|
||
Lars-Peter Clausen
|
74f582ec12 |
iio: Replace strtobool() with kstrtobool()
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Linus Torvalds
|
02e2af20f4 |
Char/Misc and other driver updates for 5.18-rc1
Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates There will be two merge conflicts with your tree, one in MAINTAINERS which is obvious to fix up, and one in drivers/phy/freescale/Kconfig which also should be easy to resolve. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG3fQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykNEgCfaRG8CRxewDXOO4+GSeA3NGK+AIoAnR89donC R4bgCjfg8BWIBcVVXg3/ =WWXC -----END PGP SIGNATURE----- Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ... |
||
Linus Torvalds
|
ad9c6ee642 |
spi: Updates for v5.18
The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6 dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6 Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+ s3qnDthohWMJoF1W6ERf3HiAgNIfhg== =4tlR -----END PGP SIGNATURE----- Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ... |
||
Greg Kroah-Hartman
|
cc6ce5ac2c |
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmIfdM8RHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FoiGlQ//UyRpMX9Bv97LAbMDnqIHLYroTLJA3WFQ AaL/DKB1cVjBCoHlp24qaQrmncvifPF7sKJGKWf7yCHL5fraAYL/kHsCo/jECTho QOk9QaPAMP9ChOoVoP8iz5qrdF2qyoFUG69bX+QYeKhSKzcK1QPRTQ13LIL43d9p OJX47Cu7FfFwuAs5VKSVgpcII0tctv+Fdo6BkkeI+6w/vx2sFSzRaqRtc1ZU4Uav s51dM9JMos52e/G8yQAEOC24QUId4EHxo7QR8WjzZ47yIHRulpYwM6pWAtvOqEy9 eV++yz581+Uqs/qaDDk8nJdpa8aEv/NvfAK6gufB9UOWziMoR3G1pPFWoOLbcyIt IcUG+QyyEiIlmlwDE/m2OcSMzsxgrkEHNb3SE7ZkWZKP8OasGdVMHa7yEKCgLmzM S8EY9TsNA50A2VtowAPrdk74TVG2WeIDvEH2MMAUMjgW2DzsW9cmwFrziyj7ZPLX onoEjd/kpL2zzAArEadvzD1z1lLJcOUWn8ST2kbPQG8n/rp5y2u5PvgWRoO9zJlD ztX614XYRgRUhMrgb0q0nCTi07mnBZrR3P8Hnx1HOoZon/DIqPSL7NumITG09cQc fHqewQOU/WqoTH4tNvfywnBL/VAcxKFlc0B2rWIvp6dD5b0TU34ZdebcjLT1zYeC 6YQKbRaRjVg= =UnWv -----END PGP SIGNATURE----- Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ... |
||
Cristian Pop
|
b59c041559 |
iio: frequency: admv4420.c: Add support for ADMV4420
Add support for K Band Downconverter with Integrated Fractional-N PLL and VCO. More info: https://www.analog.com/en/products/admv4420.html Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20220223130808.13352-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Antoniu Miclaus
|
f4eb9ac784 |
iio: frequency: admv1014: add support for ADMV1014
The ADMV1014 is a silicon germanium (SiGe), wideband, microwave downconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1014.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220215081216.67706-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Uwe Kleine-König
|
a0386bba70
|
spi: make remove callback a void function
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Andy Shevchenko
|
130650e836 |
iio: frequency: adf4350: Make use of device properties
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220203110006.4291-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Muhammad Usama Anjum
|
a1cba0e2de |
iio: frequency: admv1013: remove the always true condition
unsigned int variable is always greater than or equal to zero. Make the
if condition simple.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes:
|
||
Lars-Peter Clausen
|
48788715ac |
iio: ad9523: Use sysfs_emit()
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom device attributes of the ad9523 driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-5-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Jonathan Cameron
|
9ccac0d047 |
iio:frequency:admv1013: White space cleanup of spacing around {} in id tables
The spacing was inconsistent with a space after the { but not before the }. Tidy this up to avoid providing a bad example to copy into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20211230174911.78291-11-jic23@kernel.org |
||
Antoniu Miclaus
|
da35a7b526 |
iio: frequency: admv1013: add support for ADMV1013
The ADMV1013 is a wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 24 GHz to 44 GHz radio frequency (RF) range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211221112206.97066-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
||
Nathan Chancellor
|
7b473ae754 |
iio: frequency: adrf6780: Fix adrf6780_spi_{read,write}()
Clang warns:
drivers/iio/frequency/adrf6780.c:117:1: error: all paths through this
function will call itself [-Werror,-Winfinite-recursion]
{
^
drivers/iio/frequency/adrf6780.c:138:1: error: all paths through this
function will call itself [-Werror,-Winfinite-recursion]
{
^
2 errors generated.
The underscore variants should be used here.
Link: https://github.com/ClangBuiltLinux/linux/issues/1490
Fixes:
|
||
Antoniu Miclaus
|
63aaf6d06d |
iio: frequency: adrf6780: add support for ADRF6780
The ADRF6780 is a silicon germanium (SiGe) design, wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 5.9 GHz to 23.6 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADRF6780.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211021113244.56936-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |